Restore 5.1.1 error ipad 3

Issuing iPad 3 7.1 I want to restore the iPad 3 to Version 5.1.1 How can I so

You can't, Apple does not support downgrades on Ios, you can only install the latest software version.

Similar Messages

  • My iPad 2 will not restore using iTunes. It keeps telling me - the iPad "iPad" could not be restored. An unknow error occurred (4) - I have tried every suggestion I could find so far. Any ideas as to what I can do?

    My iPad 2 will not restore using iTunes. It just quit a week or two ago and showed that I had to connect to iTunes.
    When I do the "restore and update" it does not complete the "verifying iPad restore with Apple" and then shows the following message:
    The iPad "iPad" could not be restored. An unknown error occurred (40).
    I have tried it a number of times. Also turned of anti-virus and firewall. Tried on different computers. All resulted in the same message. The iPad is only 2 1/2 years old, so I hope it can be fixed.
    Does anyone have a solution?
    KandAfromMO

    Found this thread by searching the forum. I hope it helps.
    https://discussions.apple.com/thread/5471311

  • HT201210 My iPad is not recognized by Finder or iTunes when it is plugged into the computer.  i ran the Restore sequence and got an error message stating "The iPad could not be restored.  An unknown error occurred (1611).  Can this be fixed?

    My iPad is not recognized by Finder or iTunes when it is plugged into the computer.  i ran the Restore sequence and got an error message stating "The iPad could not be restored.  An unknown error occurred (1611).  Can this be fixed?

    iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes
    Security software issues covered in: iTunes: Troubleshooting security software issues - http://support.apple.com/kb/TS3125

  • The iPad could not be restored. An unknown error occurred (1)

    As a lot of people had last night the Apple servers were very busy with iPads and iPhones upgrading to iOS5... So I waited until this morning to upgrade.
    iPhone 4 no issues at all and now using iOS5
    iPad (version 1) backed up but not is coming up with the following error:
    The iPad "iPad" could not be restored. An unknown error occurred (1)
    Typically error 1 isn't on the list and I can only find a handful of similar comments with no luck in fixing this.
    The error appears when trying to restore the firmware and I have tried rebooting my mbp and iPad multiple times. I have even resorted to installing iTunes on my Windows 7 PC where I also get the same error.
    Anyone had any luck in getting past this?

    I am having this same problem. I haven't plugged my ipad into my computer in 6 months or so but some of the apps (like ABC shows) are now asking for the the iOS5 so I figured I needed to go ahead and get everything updated. I have an ipad1 16G, with wifi and Verizon 3G and am using itunes on a pc.  The cellular was turned off when I plugged it in, but the wifi was turned on. It is now stuck in an endless loop where it tells me that itunes has detected an ipad that needs system restore, but when i try to restore, it eventually comes back with an error that says "The iPad "iPad" could not be restored. An unknown error occurred (1)."
    I plugged in and updated my iPhone 4 and it updated no problem.
    I see that all these notes about this problem are back from October and November of last year. I'm wondering if anyone has had it recently or if a solution has been identified?
    It sounds like if I keep trying the restore over and over again like 100 times, it might eventually work?  I don't think it's fair for me to have to buy a new device since it was apple's update software that broke it.

  • The iPad "iPad" could not be restored. An unknown error occurred (1)

    I tried to update my iPad 2 (Wifi, 3G) to ios 5.1.1 over the air. I left it running at night because it said approximately 3 hours to download. In the morning it had the connect to itunes symbol (Basically in restore mode). I have tried restoring it and it runs well until it gets to restoring iPad firmware. It gets stuck here for maybe an hour and eventually says " The iPad "iPad" could not be restored. An unknown error occurred (1). I have tried it on three different computers running windows 7 and MAC OS but i get the same result. We dont have any apple stores or service centers in my country. It is a relatively brand new iPad as i have only had it for about a month, it has not been jailbroken or anything. So i really dont understand why this is the case. Apple doesnt seem to have any solution for this from what i have googled. Is there anyone who has succesfully overcome this problem. Please help. Apple you need to get your act together because it is soooooooooooo frustrating and you dont seem to be doing anything. I have wasted 3 days trying to get this thing to work and nothing.

    FYI - This is an iPad user to user forum. Apple doesn't read the forum posts.
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom

  • HT4097 my ipad 3 is stuck in the "connect to itunes" mode. whether i restart or try to restore. when i try to restore itunes gives an error message saying an unknown error occurred (-1). any help.

    my ipad 3 is stuck in the "connect to itunes" mode. whether i restart or try to restore. when i try to restore itunes gives an error message saying an unknown error occurred (-1). any help.

    That error sometimes indicates a hardware problem. See 2nd link below.
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • I wish to update my ipad 2 from ios 4.3.3 to ios 7, when i want to restore back, it occurs error 3004. How?

    I wish to update my ipad 2 from ios 4.3.3 to ios 7, i follow all the steps and until the end, when i want to restore back, it occurs error 3004. How? and now i can't even use my ipad at all, it's empty.

    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.

  • TS3694 The Ipad "Ipad" could not be restored. An unknown error occured (3014) how to fix

    I tried updating my Ipad to ios 6 and got a error while during the process and now it says I have a Ipad that needs to be restored if I click restore I get The Ipad "Ipad" could not be restored. An unknown error occured (3014) how can I fix this issue I updated Itunes to newest version and tried to hold down sleep/awake and Home button to reset Ipad and tried redownloading software onto another user itunes same thing please help thanks.

    Place the iPod in recovery mode and then try to restore:
    http://support.apple.com/kb/HT1808
    Also see here:
    http://support.apple.com/kb/TS3694

  • HT201210 First app store behaved weird than total crash! Ipad could not be restored. An unknown error occured (9)

    I upgraded my new Ipad to OS to 6.0.1 today.
    Right after update visual feedback on app store was simply not there.
    You press install, it does not give you the "now installing" feedback. Yet you find out that the program is installed after couple of minutes!
    Right after this I started to wish for 6.0.X or so...
    Then I tried Nasa Spacecraft 3D app which was already installed.
    The program run fine, then while the camera was active, Ipad decided to reset itself... over and over and over again...
    I did the home and sleep button gimmick, no result... never booted up again but got stuck in reset over and over again mode.
    I tried to connect to itunes and recover the pad but not use... The following image is the heartbreaking message from iTunes...
    When you press "More Information" you simply get to reach this topic which is seemingly unrelated, yet I posted this here..
    Will take it to the service first thing tomorrow, but Apple is about to lose a lot of hard earned credit on my side

    Guys,
    I am facing simlar issue. Could you pls let me know if are able to solve your iPad issue. I also download the iPad2_2_4.3.2_8H7_Restore.ipsw and tried to Restore using shift-->Restore and selecting the downloaded file. Following sequence take place:
    Extracting software
    Verifying iPad information
    Preparing iPad for restore
    Waiting for iPad
    Preparing iPad software for restore
    Restoring iPad software
    The iPad 'iPad' could not be restored. An unknown error occured(2).
    At the end, i'm still not able to Restore my iPad. Pls not that the "Update" option is always disabled and therefore i only get an option to Restore which is not working.
    FYI, i am using PC with WinXP Professional with SP3. iTunes latest version 10 and iPad 2 with Wi-Fi and 3G model in India.
    Plzzzzz help.
    Thxs

  • Ipad 2-Wifi cannot be restored or turned on, error 1600

    About a week and a half ago, I was using my iPad 2 as normal. Later that day I went to use it and the screen would not come on. My device is about 2 months out of warranty. Apple doesn't seem to care about repairing it so I figured I'd turn to you guys. I took it to the store and attempted to get phone support. The apple "genius" just told me since it was out of warranty, I had no choice but to replace it for $250. The phone tech basically gave me the same run around. I know this thing is fixable. I have spent probably 10-15 hours researching the internet for answers.
    So when I plug the device into the computer, iTunes detects it as being an iPad 2 and that it is in recovery mode. I have tried this on multiple computers both windows and mac. Previously the device was running 6.1.2, but since Apple feels they no longer need that, I have downloaded 6.1.3. I attempt to restore it, but it just gives me error 1600. Like I said, I've tried multiple computers, along with several different sets of cables, and usb ports. Please help!

    From 2nd link below:
    Error 1600, 1601, 1602
    Follow the steps listed below for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for  details on troubleshooting security software.
    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • TS3694 I am getting a message that says, " The iPad could not be restored. An unknown error occurred (24).  Has anyone encountered this problem?

    Has anyone encountered this problem.  I am desperate!

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
     Cheers, Tom

  • Error message on iPad1 "the iPad could not be restored. An unknown error occurred (1)".

    Hello, I ran into the following error message "the iPad could not be restored. An unknowed error occurred (1)" while I was updating my iPad1. Then, I tried to restore it several times on different computers, but always got the same message. I went to the apple store, and they basically suggested me to buy a new one. My iPad is just one year and 3 months old. What should I do? Thanks

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
     Cheers, Tom

  • HT201210 When I Restored my ipad 2, it will come out error [ The iPad "iPad" could not be restored. An unknown error occurred (-1). How can I do?

    When I Restored my ipad 2, it will come out error [ The iPad "iPad" could not be restored. An unknown error occurred (-1). How can I do?

    http://support.apple.com/kb/TS3694#error1
    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice.

  • When I do I get The iPad "iPad" could not be restored. An unknown error occurred (3194).

    when I do I get The iPad "iPad" could not be restored. An unknown error occurred (3194).

    Hi,
    Check your network settings as specified here:
    http://support.apple.com/kb/TS3694?viewlocale=en_US&locale=en_US#error3194
    Hope that helps.

  • The ipad"ipad" could not be restored. An unknown error occured (16). How do I resolve this error?

    The ipad"ipad" could not be restored. An unknown error occured (16). How do I resolve this error?

    Your error code falls within the 10-47 range mentioned here.
    Check for hardware issues
    Related errors: 1, 3, 10-47, 1002, 1011, 1012, 1014, 1000-1020, 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    Error 1015 might happen after making unauthorized modifications to iOS, also called "jailbreaking."
    Use recovery mode to restore your device
    Related errors: 1015, “The required resource can't be found.”
    You might see these error messages if your device has a beta version of iOS or if you're installing an older version of iOS (downgrading). Use recovery mode to restore your device to the latest version of iOS.
    Quit virtualization software
    Quit any virtualization software (such as Parallels or VMware) that’s running on your Mac. Then use the latest version of iTunes to restore your device.

Maybe you are looking for

  • Another error -8 :(

    Well I've been happy with my purchase of the MacBook up until I couldnt get my iChat AV working (except for once for a minute). Brand new MacBook 2.16ghz. I've tried using AirPort to connect wirelessly and with an ethernet cord to my Linksys WRT54GX4

  • Is there a way to scale down the movement of a parented object, while keeping it on the same path as the parent?

    I have three elements in my comp--a foreground element, a mediumground element (a tree), and a background element (the sky). I want to parent the medium and background elements to the path of the foreground element--but since they are farther away fo

  • Need some help archiving and photos that are in multiple collections.

    After creating a new catalog for photos from a collection, I'd want to remove the photos from Lightroom and keep on disk.  In the collection, there are some photos that are in multiple other collections and I'd want to keep those images in their othe

  • F-58 Manual check payment

    Hi My client is running manual check in f-58 the problem is when ever he run the check it will pick up the check no,s automatically in manually check no,s we r giving. But is there any option to pick up the check nos automatically no need to f110 t.c

  • Acrobat Form - Plus sign

    I am creating a form. When the value is negative ( I want a minus sign in front of the value, this of course works fine) But when I put a positive value, the positive value goes away, how do I make the positive value have a "plus sign" in front of it