Restore a database from RAC to standalone oracle server
Hi,
I wanted to know whether we can restore a RAC database to a standalone machine. Steps which i am planning to do
1) Create a stand alone server
2) Install oracle in the same path as that in RAC
3) Create a database of the same name
4) Re direct Restore to this location from RAC database
The database is non asm. Can any one let me know whether RAC database support redirect restore.
Amith
This is possible.You won't have to create the new database though. Rman will do this for you (after all, you restore/recover a full database). It is much easier when you also use ASM on the destination but is you do not want to use asm, you can still use rman to rename/relocate all datafiles to a non-asm location.
Bjoern
Similar Messages
-
How to restore a database from host A to host B by using RMAN
Hi there
I wanted to restore 1 database from machine A to machine B with the differente files systemes. I did these steps below, but I have a problem when I restore the controlfile from machine A to machine B.
1-copy the controlfile from machine A to machine B by using OS utility.
2-startup nomount the database on machine B.
3-connect target and catalog RMAN.
4-I have to restore the controlfile from last full backup of the machine A to machine B (see the procedure RMAN).
I have the error messages like:
RMAN> connect target /
RMAN-06006: connected to target database: dbtest (not mounted)
RMAN> connect catalog rman/rman@rcattest
RMAN-06008: connected to recovery catalog database
RMAN> run {
2> allocate channel c1 type 'sbt_tape' ;
3> restore controlfile ;
4> }
RMAN-03022: compiling command: allocate
RMAN-03023: executing command: allocate
RMAN-08030: allocated channel: c1
RMAN-08500: channel c1: sid=10 devtype=SBT_TAPE
RMAN-08526: channel c1: VERITAS NetBackup for Oracle8 - Release 3.2GA
RMAN-03022: compiling command: restore
RMAN-03022: compiling command: IRESTORE
RMAN-03023: executing command: IRESTORE
RMAN-08016: channel c1: starting datafile backupset restore
RMAN-08502: set_count=177 set_stamp=419449530 creation_time=19-JAN-01
RMAN-08021: channel c1: restoring controlfile
RMAN-08505: output filename=/db/oracle/dbtest/dbtestcontrol01.ctl
RMAN-03026: error recovery releasing channel resources
RMAN-08031: released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure during compilation of command
RMAN-03013: command type: restore
RMAN-03007: retryable error occurred during execution of command: IRESTORE
RMAN-07004: unhandled exception during command execution on channel c1
RMAN-10035: exception raised in RPC: ORA-19507: failed to retrieve sequential file, handle="5hcg0ilq_1_1", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: sbtrestore: Backup file not found.
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.RESTOREBACKUPPIE
nullHi there
I'm also trying to restore a full RMAN backup to our DR site using Netbackup as MML
My scenario is:
We have one tape library at our PROD data center and another one at our DR site both using Netbackup as Storage manager
I performed a full RMAN backup on 4 DLT tapes with recovery catalog at our PROD datacenter, then I removed the 4 tapes and place it in our tape lib at DR site
I tried to import the tapes using bpimport from Netbackup which has been successful up to now
But when I tried to restore controlfile from RMAN, I get the following error:
connected to target database: prod (not mounted)
connected to recovery catalog database
RMAN> run {
2> allocate channel c1 type 'SBT_TAPE';
3> allocate channel c2 type 'SBT_TAPE';
4> allocate channel c3 type 'SBT_TAPE';
5> allocate channel c4 type 'SBT_TAPE';
6> set until time '16-AUG-2005 15:00:00';
7> restore controlfile;
8> }
allocated channel: c1
channel c1: sid=13 devtype=SBT_TAPE
channel c1: VERITAS NetBackup for Oracle - Release 5.0GA (2003103005)
allocated channel: c2
channel c2: sid=12 devtype=SBT_TAPE
channel c2: VERITAS NetBackup for Oracle - Release 5.0GA (2003103005)
allocated channel: c3
channel c3: sid=11 devtype=SBT_TAPE
channel c3: VERITAS NetBackup for Oracle - Release 5.0GA (2003103005)
allocated channel: c4
channel c4: sid=9 devtype=SBT_TAPE
channel c4: VERITAS NetBackup for Oracle - Release 5.0GA (2003103005)
executing command: SET until clause
Starting restore at 18-AUG-2005:10:28:23
channel c1: starting datafile backupset restore
channel c1: restoring controlfile
output filename=/oracle9i/dba/dbs/control01_drprod.ctl
released channel: c1
released channel: c2
released channel: c3
released channel: c4
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 08/18/2005 10:28:25
ORA-19507: failed to retrieve sequential file, handle="df_t566491965_s8860_p1", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
Failed to process backup file <df_t566491965_s8860_p1>
Anyone mastering this, please help !!
thks
BL -
Restoring master database from management studio
How to restore master database from SSMS? is it possible? if yes, what is the procedure.
I knew that how to restore from sqlcmd.How to restore master database from SSMS? is it possible? if yes, what is the procedure.
I knew that how to restore from sqlcmd.
1.Start the server with the -m startup parameter
2.Turn off Sql Agent Service, login to SSMS, first disconnect object explorer.
3.Restore your master backup
4.The server shuts down automatically when the restore ends
5.Remove the -m startup parameter and then restart the server
6.If any databases were created after the master backup, reattach them
7.If any server-scoped objects were created after the master backup, recreate them
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
Praveen Dsa | MCITP - Database Administrator 2008 |
My Blog | My Page -
Restore the backup from tape to some other server
Dear All,
I need to restore the backup from tape to some other server.PLease suggest the command and setp to do that.
Regards,
KumarHi,
I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
allocated channel: t1
channel t1: sid=2386 devtype=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.4.1.0
Starting restore at 09-MAY-10
channel t1: looking for autobackup on day: 20100509
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/09/2010 11:57:01
ORA-27191: sbtinfo2 returned error
Additional information: 2
RMAN>
Thanks, -
Restoring from rac to standalone
We have a production oracle database 9.2.0.4 (RAC) on AIX 5.0 with datafiles inplemented as raw devices. How can I restore it to a standalone AIX 5.0 machine with oracle 9.2.0.1 installed on it alongwith datafiles as raw devices with same names by using the hotbackup taken from RAC (using manual scripts not RMAN).
I want to bring my database to the state of 31July. After getting some information I need it to extend further to 10Aug. I have controlfiles backed up using 'alter database backup controlfile' of 31July and 10Aug and hot backup of datafiles as on 27July.
-
Restored standby database from primary; now no logs are shipped
Hi
We recently had a major network/SAN issue and had to restore our standby database from a backup of the primary. To do this, we restored the database to the standby, created a standby controlfile on the primary, copied this across to the control file locations and started in standby recover and applied the logs manually/registered to get it back up to speed.
However, no new logs are being shipped across from the primary.
Have we missed a step somewhere?
One thing we've noticed is that there is no RFS process running on the standby:
SQL> SELECT PROCESS, CLIENT_PROCESS, SEQUENCE#, STATUS FROM V$MANAGED_STANDBY;
PROCESS CLIENT_P SEQUENCE# STATUS
ARCH ARCH 0 CONNECTED
ARCH ARCH 0 CONNECTED
MRP0 N/A 100057 WAIT_FOR_LOG
How do we start this? Or will it only show if the arc1 process on the primary is sending files?
The arc1 process is showing at OS level on the primary but I'm wondering if its faulty somehow?
There are NO errors in the alert logs in the primary or the standby. There's not even the normal FAL gap sequence type error - in the standby it's just saying 'waiting for log' and a number from ages ago. It's like the primary isn't even talking to the standby. The listener is up and running ok though...
What else can we check/do?
If we manually copy across files and do an 'alter database register' then they are applied to the standby without issue; there's just no automatic log shipping going on...
Thanks
RossHi all
Many thanks for all the responses.
The database is 10.2.0.2.0, on AIX 6.
I believe the password files are ok; we've had issues previously and this is always flagged in the alert log on the primary - not the case here.
Not set to DEFER on primary; log_archive_dest_2 is set to service="STBY_PHP" optional delay=720 reopen=30 and log_archive_dest_state_2 is set to ENABLE.
I ran those troubleshooting scripts, info from standby:
SQL> @troubleshoot
NAME DISPLAY_VALUE
db_file_name_convert
db_name PHP
db_unique_name PHP
dg_broker_config_file1 /oracle/PHP/102_64/dbs/dr1PHP.dat
dg_broker_config_file2 /oracle/PHP/102_64/dbs/dr2PHP.dat
dg_broker_start FALSE
fal_client STBY_PHP
fal_server PHP
local_listener
log_archive_config
log_archive_dest_2 service=STBY_PHP optional delay=30 reopen=30
log_archive_dest_state_2 DEFER
log_archive_max_processes 2
log_file_name_convert
remote_login_passwordfile EXCLUSIVE
standby_archive_dest /oracle/PHP/oraarch/PHParch
standby_file_management AUTO
NAME DB_UNIQUE_NAME PROTECTION_MODE DATABASE_R OPEN_MODE
PHP PHP MAXIMUM PERFORM PHYSICAL S MOUNTED
ANCE TANDBY
THREAD# MAX(SEQUENCE#)
1 100149
PROCESS STATUS THREAD# SEQUENCE#
ARCH CONNECTED 0 0
ARCH CONNECTED 0 0
MRP0 WAIT_FOR_LOG 1 100150
NAME VALUE UNIT TIME_COMPUTED
apply finish time day(2) to second(1) interval
apply lag day(2) to second(0) interval
estimated startup time 8 second
standby has been open N
transport lag day(2) to second(0) interval
NAME Size MB Used MB
0 0
On the primary, the script has froze!! How long should it take? Got as far as this:
SQL> @troubleshoot
NAME DISPLAY_VALUE
db_file_name_convert
db_name PHP
db_unique_name PHP
dg_broker_config_file1 /oracle/PHP/102_64/dbs/dr1PHP.dat
dg_broker_config_file2 /oracle/PHP/102_64/dbs/dr2PHP.dat
dg_broker_start FALSE
fal_client STBY_R1P
fal_server R1P
local_listener
log_archive_config
log_archive_dest_2 service="STBY_PHP" optional delay=720 reopen=30
log_archive_dest_state_2 ENABLE
log_archive_max_processes 2
log_file_name_convert
remote_login_passwordfile EXCLUSIVE
standby_archive_dest /oracle/PHP/oraarch/PHParch
standby_file_management AUTO
NAME DB_UNIQUE_NAME PROTECTION_MODE DATABASE_R OPEN_MODE SWITCHOVER_STATUS
PHP PHP MAXIMUM PERFORMANCE PRIMARY READ WRITE SESSIONS ACTIVE
THREAD# MAX(SEQUENCE#)
1 100206
NOW - before you say it - :) - yes, I'm aware that fal_client as STBY_R1P and fal_server as R1P are incorrect - should be PHP - but it looks like it's always been this way! Well, as least for the last 4 years where it's worked fine, as I found an old SP file and it still has R1P set in there...?!?
Any ideas?
Ross -
Problem with restoring a database from cold backup
All,
I've got a 10.2.0.4 database that we perform a cold backup on every night with RMAN. On Sunday 2/21, we have level 0 backup. On Monday-Wednesday nights, we take a cold level 1. We also perform a controlfile auto backup each night.
On a second server where I want to restore the database (same version of Oracle 10.2.0.4), I've copied the control file auto backups, the level 0 and the most recent level 1. I now want to restore. I use an RMAN script similar to the following to restore the control files:
connect target /;
set dbid 1973354860;
# Restore the controlfile from the tag that auto backed up the controlfile at the end of the level 0
run
startup nomount;
allocate channel c1 type disk;
restore controlfile to '/u01/app/oracle/oradata/ORADB1/control01.ctl' from AUTOBACKUP;
restore controlfile to '/u02/app/oracle/oradata/ORADB1/control02.ctl' from AUTOBACKUP;
restore controlfile to '/u03/app/oracle/oradata/ORADB1/control03.ctl' from AUTOBACKUP;
release channel c1;
shutdown immediate;
After the control files restore successfully, I perform some RMAN checks to ensure that all of the files I need for a recovery are there. The RMAN> list backup of database; command shows all of my backup savesets as AVAILABLE for the level0 and level1 backups.
I then try a restore database command; and get the following errors:
RMAN> run
2> {
3> allocate channel c1 type disk;
4> allocate channel c2 type disk;
5> allocate channel c3 type disk;
6> allocate channel c4 type disk;
7> restore database from tag='TAG20100221T200045';
8> }
using target database control file instead of recovery catalog
allocated channel: c1
channel c1: sid=74 devtype=DISK
allocated channel: c2
channel c2: sid=70 devtype=DISK
allocated channel: c3
channel c3: sid=166 devtype=DISK
allocated channel: c4
channel c4: sid=168 devtype=DISK
Starting restore at 25-FEB-10
released channel: c1
released channel: c2
released channel: c3
released channel: c4
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 02/25/2010 13:33:19
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 44 found to restore
RMAN-06023: no backup or copy of datafile 43 found to restore
RMAN-06023: no backup or copy of datafile 42 found to restore
RMAN-06023: no backup or copy of datafile 40 found to restore
RMAN-06023: no backup or copy of datafile 39 found to restore
RMAN-06023: no backup or copy of datafile 38 found to restore
RMAN-06023: no backup or copy of datafile 37 found to restore
RMAN-06023: no backup or copy of datafile 36 found to restore
RMAN-06023: no backup or copy of datafile 35 found to restore
RMAN-06023: no backup or copy of datafile 34 found to restore
RMAN-06023: no backup or copy of datafile 33 found to restore
RMAN-06023: no backup or copy of datafile 32 found to restore
RMAN-06023: no backup or copy of datafile 31 found to restore
RMAN-06023: no backup or copy of datafile 30 found to restore
RMAN-06023: no backup or copy of datafile 29 found to restore
RMAN-06023: no backup or copy of datafile 28 found to restore
RMAN-06023: no backup or copy of datafile 27 found to restore
RMAN-06023: no backup or copy of datafile 26 found to restore
RMAN-06023: no backup or copy of datafile 25 found to restore
RMAN-06023: no backup or copy of datafile 24 found to restore
RMAN-06023: no backup or copy of datafile 23 found to restore
RMAN-06023: no backup or copy of datafile 22 found to restore
RMAN-06023: no backup or copy of datafile 21 found to restore
RMAN-06023: no backup or copy of datafile 20 found to restore
RMAN-06023: no backup or copy of datafile 19 found to restore
RMAN-06023: no backup or copy of datafile 18 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 16 found to restore
RMAN-06023: no backup or copy of datafile 15 found to restore
RMAN-06023: no backup or copy of datafile 14 found to restore
RMAN-06023: no backup or copy of datafile 13 found to restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>
But I know from the RMAN crosscheck and list backup commands that the savesets are available on disk. For example:
RMAN> list backup of datafile 1;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
4875 Incr 0 4.37G DISK 00:22:53 21-FEB-10
BP Key: 4875 Status: AVAILABLE Compressed: YES Tag: TAG20100221T200045
Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4929_piece_1_date_20100221_711578185
List of Datafiles in backup set 4875
File LV Type Ckp SCN Ckp Time Name
1 0 Incr 5086110241948 21-FEB-10 /u01/app/oracle/oradata/ORADB1/system01.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
4894 Incr 1 1.92G DISK 00:13:46 24-FEB-10
BP Key: 4894 Status: AVAILABLE Compressed: YES Tag: TAG20100224T200037
Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4949_piece_1_date_20100224_711836434
List of Datafiles in backup set 4894
File LV Type Ckp SCN Ckp Time Name
1 1 Incr 5086113791743 24-FEB-10 /u01/app/oracle/oradata/ORADB1/system01.dbf
RMAN> list backup of datafile 44; (the first one in the list above)
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
4872 Incr 0 7.15G DISK 00:35:17 21-FEB-10
BP Key: 4872 Status: AVAILABLE Compressed: YES Tag: TAG20100221T200045
Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4927_piece_1_date_20100221_711576046
List of Datafiles in backup set 4872
File LV Type Ckp SCN Ckp Time Name
44 0 Incr 5086110241948 21-FEB-10 /u04/app/oracle/oradata/ORADB1/NETINSIGHT_INDEXES_03.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
4893 Incr 1 4.06G DISK 00:26:52 24-FEB-10
BP Key: 4893 Status: AVAILABLE Compressed: YES Tag: TAG20100224T200037
Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4947_piece_1_date_20100224_711835238
List of Datafiles in backup set 4893
File LV Type Ckp SCN Ckp Time Name
44 1 Incr 5086113791743 24-FEB-10 /u04/app/oracle/oradata/ORADB1/NETINSIGHT_INDEXES_03.dbf
As you can see, the level 0 and level 1 backups are showing as available. To double check, I perform a crosscheck backup of database;
RMAN> crosscheck backup of database;
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=74 devtype=DISK
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4927_piece_1_date_20100221_711576046 recid=4872 stamp=711576046
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4928_piece_1_date_20100221_711576046 recid=4873 stamp=711576046
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4930_piece_1_date_20100221_711578189 recid=4874 stamp=711578189
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4929_piece_1_date_20100221_711578185 recid=4875 stamp=711578186
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4932_piece_1_date_20100221_711579570 recid=4876 stamp=711579570
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4931_piece_1_date_20100221_711579392 recid=4877 stamp=711579393
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4934_piece_1_date_20100221_711580369 recid=4878 stamp=711580370
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4935_piece_1_date_20100221_711580535 recid=4879 stamp=711580535
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4933_piece_1_date_20100221_711580122 recid=4880 stamp=711580123
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4948_piece_1_date_20100224_711835237 recid=4892 stamp=711835238
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4947_piece_1_date_20100224_711835238 recid=4893 stamp=711835238
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4949_piece_1_date_20100224_711836434 recid=4894 stamp=711836436
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4950_piece_1_date_20100224_711836866 recid=4895 stamp=711836866
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4951_piece_1_date_20100224_711837267 recid=4896 stamp=711837268
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4952_piece_1_date_20100224_711837971 recid=4897 stamp=711837972
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4953_piece_1_date_20100224_711837989 recid=4898 stamp=711837989
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4955_piece_1_date_20100224_711838522 recid=4899 stamp=711838522
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4954_piece_1_date_20100224_711838520 recid=4900 stamp=711838521
Crosschecked 18 objects
RMAN>
So I'm unclear as to why RMAN believes the backups of these files don't exist when I attempt to restore the database. Anyone have a clue?
NOTE: I've also tried to restore spcifically with the tag= clause but I get the same results:
RMAN> restore database from tag='TAG20100221T200045';
Starting restore at 25-FEB-10
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 02/25/2010 13:41:04
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 44 found to restore
RMAN-06023: no backup or copy of datafile 43 found to restore
RMAN-06023: no backup or copy of datafile 42 found to restore
RMAN-06023: no backup or copy of datafile 40 found to restore
RMAN-06023: no backup or copy of datafile 39 found to restore
RMAN-06023: no backup or copy of datafile 38 found to restore
RMAN-06023: no backup or copy of datafile 37 found to restore
RMAN-06023: no backup or copy of datafile 36 found to restore
RMAN-06023: no backup or copy of datafile 35 found to restore
RMAN-06023: no backup or copy of datafile 34 found to restore
RMAN-06023: no backup or copy of datafile 33 found to restore
RMAN-06023: no backup or copy of datafile 32 found to restore
RMAN-06023: no backup or copy of datafile 31 found to restore
RMAN-06023: no backup or copy of datafile 30 found to restore
RMAN-06023: no backup or copy of datafile 29 found to restore
RMAN-06023: no backup or copy of datafile 28 found to restore
RMAN-06023: no backup or copy of datafile 27 found to restore
RMAN-06023: no backup or copy of datafile 26 found to restore
RMAN-06023: no backup or copy of datafile 25 found to restore
RMAN-06023: no backup or copy of datafile 24 found to restore
RMAN-06023: no backup or copy of datafile 23 found to restore
RMAN-06023: no backup or copy of datafile 22 found to restore
RMAN-06023: no backup or copy of datafile 21 found to restore
RMAN-06023: no backup or copy of datafile 20 found to restore
RMAN-06023: no backup or copy of datafile 19 found to restore
RMAN-06023: no backup or copy of datafile 18 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 16 found to restore
RMAN-06023: no backup or copy of datafile 15 found to restore
RMAN-06023: no backup or copy of datafile 14 found to restore
RMAN-06023: no backup or copy of datafile 13 found to restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restoreJust as a follow on to my last post, after the RMAN-06023 messages, I list backups of the three datafiles and as you can see RMAN thinks that they are available. If I exit RMAN and list them at the OS level, they are where RMAN things they should be:
RMAN> restore database;
Starting restore at 25-FEB-10
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 02/25/2010 16:17:39
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN> list backup of datafile 4;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
4880 Incr 0 1.36G DISK 00:08:57 21-FEB-10
BP Key: 4880 Status: AVAILABLE Compressed: YES Tag: TAG20100221T200045
Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4933_piece_1_date_20100221_711580122
List of Datafiles in backup set 4880
File LV Type Ckp SCN Ckp Time Name
4 0 Incr 5086110241948 21-FEB-10 /u02/app/oracle/oradata/ORADB1/users01.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
4890 Incr 1 934.82M DISK 00:09:42 22-FEB-10
BP Key: 4890 Status: AVAILABLE Compressed: YES Tag: TAG20100222T200047
Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4943_piece_1_date_20100222_711664989
List of Datafiles in backup set 4890
File LV Type Ckp SCN Ckp Time Name
4 1 Incr 5086111401249 22-FEB-10 /u02/app/oracle/oradata/ORADB1/users01.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
4898 Incr 1 947.57M DISK 00:08:49 24-FEB-10
BP Key: 4898 Status: AVAILABLE Compressed: YES Tag: TAG20100224T200037
Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4953_piece_1_date_20100224_711837989
List of Datafiles in backup set 4898
File LV Type Ckp SCN Ckp Time Name
4 1 Incr 5086113791743 24-FEB-10 /u02/app/oracle/oradata/ORADB1/users01.dbf
RMAN>
RMAN> list backup of datafile 3;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
4874 Incr 0 2.65G DISK 00:19:50 21-FEB-10
BP Key: 4874 Status: AVAILABLE Compressed: YES Tag: TAG20100221T200045
Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4930_piece_1_date_20100221_711578189
List of Datafiles in backup set 4874
File LV Type Ckp SCN Ckp Time Name
3 0 Incr 5086110241948 21-FEB-10 /u02/app/oracle/oradata/ORADB1/sysaux01.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
4885 Incr 1 1.95G DISK 00:15:54 22-FEB-10
BP Key: 4885 Status: AVAILABLE Compressed: YES Tag: TAG20100222T200047
Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4940_piece_1_date_20100222_711663910
List of Datafiles in backup set 4885
File LV Type Ckp SCN Ckp Time Name
3 1 Incr 5086111401249 22-FEB-10 /u02/app/oracle/oradata/ORADB1/sysaux01.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
4895 Incr 1 1.97G DISK 00:18:13 24-FEB-10
BP Key: 4895 Status: AVAILABLE Compressed: YES Tag: TAG20100224T200037
Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4950_piece_1_date_20100224_711836866
List of Datafiles in backup set 4895
File LV Type Ckp SCN Ckp Time Name
3 1 Incr 5086113791743 24-FEB-10 /u02/app/oracle/oradata/ORADB1/sysaux01.dbf
RMAN>
RMAN>
RMAN> list backup of datafile 1;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
4875 Incr 0 4.37G DISK 00:22:53 21-FEB-10
BP Key: 4875 Status: AVAILABLE Compressed: YES Tag: TAG20100221T200045
Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level0_set_4929_piece_1_date_20100221_711578185
List of Datafiles in backup set 4875
File LV Type Ckp SCN Ckp Time Name
1 0 Incr 5086110241948 21-FEB-10 /u01/app/oracle/oradata/ORADB1/system01.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
4884 Incr 1 1.93G DISK 00:12:34 22-FEB-10
BP Key: 4884 Status: AVAILABLE Compressed: YES Tag: TAG20100222T200047
Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4939_piece_1_date_20100222_711663601
List of Datafiles in backup set 4884
File LV Type Ckp SCN Ckp Time Name
1 1 Incr 5086111401249 22-FEB-10 /u01/app/oracle/oradata/ORADB1/system01.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
4894 Incr 1 1.92G DISK 00:13:46 24-FEB-10
BP Key: 4894 Status: AVAILABLE Compressed: YES Tag: TAG20100224T200037
Piece Name: /u03/oracle_backups/ORADB1/offline/ORADB1_level1_set_4949_piece_1_date_20100224_711836434
List of Datafiles in backup set 4894
File LV Type Ckp SCN Ckp Time Name
1 1 Incr 5086113791743 24-FEB-10 /u01/app/oracle/oradata/ORADB1/system01.dbf
RMAN> exit
$ ls -ltr /u03/oracle_backups/ORADB1/offline
total 59743688
-rwx------ 1 oracle oinstall 7677960192 2010-02-25 11:13 ORADB1_level0_set_4927_piece_1_date_20100221_711576046
-rwx------ 1 oracle oinstall 7980834816 2010-02-25 11:24 ORADB1_level0_set_4928_piece_1_date_20100221_711576046
-rwx------ 1 oracle oinstall 4691853312 2010-02-25 11:29 ORADB1_level0_set_4929_piece_1_date_20100221_711578185
-rwx------ 1 oracle oinstall 2847391744 2010-02-25 11:34 ORADB1_level0_set_4930_piece_1_date_20100221_711578189
-rwx------ 1 oracle oinstall 3530924032 2010-02-25 11:39 ORADB1_level0_set_4931_piece_1_date_20100221_711579392
-rwx------ 1 oracle oinstall 1566449664 2010-02-25 11:41 ORADB1_level0_set_4932_piece_1_date_20100221_711579570
-rwx------ 1 oracle oinstall 1459781632 2010-02-25 11:43 ORADB1_level0_set_4933_piece_1_date_20100221_711580122
-rwx------ 1 oracle oinstall 561774592 2010-02-25 11:44 ORADB1_level0_set_4934_piece_1_date_20100221_711580369
-rwx------ 1 oracle oinstall 58753024 2010-02-25 11:44 ORADB1_level0_set_4935_piece_1_date_20100221_711580535
-rwx------ 1 oracle oinstall 4364124160 2010-02-25 11:56 ORADB1_level1_set_4947_piece_1_date_20100224_711835238
-rwx------ 1 oracle oinstall 2971877376 2010-02-25 12:01 ORADB1_level1_set_4948_piece_1_date_20100224_711835237
-rwx------ 1 oracle oinstall 2066546688 2010-02-25 12:03 ORADB1_level1_set_4949_piece_1_date_20100224_711836434
-rwx------ 1 oracle oinstall 2119360512 2010-02-25 12:06 ORADB1_level1_set_4950_piece_1_date_20100224_711836866
-rwx------ 1 oracle oinstall 1003356160 2010-02-25 12:06 ORADB1_level1_set_4951_piece_1_date_20100224_711837267
-rwx------ 1 oracle oinstall 1637105664 2010-02-25 12:08 ORADB1_level1_set_4952_piece_1_date_20100224_711837971
-rwx------ 1 oracle oinstall 993607680 2010-02-25 12:08 ORADB1_level1_set_4953_piece_1_date_20100224_711837989
-rwx------ 1 oracle oinstall 1130496 2010-02-25 12:09 ORADB1_level1_set_4955_piece_1_date_20100224_711838522
-rwx------ 1 oracle oinstall 283344896 2010-02-25 12:09 ORADB1_level1_set_4954_piece_1_date_20100224_711838520
-rwx------ 1 oracle oinstall 4344365056 2010-02-25 16:01 ORADB1_level1_set_4937_piece_1_date_20100222_711662448
-rwx------ 1 oracle oinstall 2959015936 2010-02-25 16:05 ORADB1_level1_set_4938_piece_1_date_20100222_711662448
-rwx------ 1 oracle oinstall 2067202048 2010-02-25 16:07 ORADB1_level1_set_4939_piece_1_date_20100222_711663601
-rwx------ 1 oracle oinstall 2089304064 2010-02-25 16:08 ORADB1_level1_set_4940_piece_1_date_20100222_711663910
-rwx------ 1 oracle oinstall 955711488 2010-02-25 16:09 ORADB1_level1_set_4941_piece_1_date_20100222_711664370
-rwx------ 1 oracle oinstall 1623564288 2010-02-25 16:11 ORADB1_level1_set_4942_piece_1_date_20100222_711664872
-rwx------ 1 oracle oinstall 980238336 2010-02-25 16:12 ORADB1_level1_set_4943_piece_1_date_20100222_711664989
-rwx------ 1 oracle oinstall 280952832 2010-02-25 16:12 ORADB1_level1_set_4944_piece_1_date_20100222_711665385
-rwx------ 1 oracle oinstall 1130496 2010-02-25 16:12 ORADB1_level1_set_4945_piece_1_date_20100222_711665521 -
Restore 9i database from tape to 10g ASM
We have a plan to upgrade 9i database to 10g ASM. The current 9i database is using file systems on AIX5L. This is a VLDB of size >3TB. I want to restore production copy to test environment. There is no test environment for this database now. So, if I want to restore to test, we need 3TB for file systems and another 3TB for ASM disk groups for migration. Instead, Is there any way I can restore production Oracle 9i backup directly into Oracle 10g ASM disk groups. So that, we can save 3TB of space allocation for file systems. Also, it will save time instead restore 9i database to test, upgrade to 10g and then migrate to ASM.
I agree that this is the space to be allocated temporarily. But, as per our company standards, the project needs to procure temporary space too.Boochi wrote:
We have a plan to upgrade 9i database to 10g ASM. The current 9i database is using file systems on AIX5L. This is a VLDB of size >3TB. I want to restore production copy to test environment. There is no test environment for this database now. So, if I want to restore to test, we need 3TB for file systems and another 3TB for ASM disk groups for migration. Instead, Is there any way I can restore production Oracle 9i backup directly into Oracle 10g ASM disk groups. So that, we can save 3TB of space allocation for file systems. Also, it will save time instead restore 9i database to test, upgrade to 10g and then migrate to ASM.
I agree that this is the space to be allocated temporarily. But, as per our company standards, the project needs to procure temporary space too.Hi Boochi,
You cannot restore a 9i RMAN backup into 10G.
You can use either export/import or transportable tablespace.
You can use below method:
1. Use transportable tablespace to migrate 9i to 10G.
2. Initially migrate all datafiles to filesystem.
3. Then migrate all datafiles to ASM.
Apart from this , you have one more option . upgrade existing 9i database to 10G and the use RMAN to restore it to 10G ASM database.
Regards
Rajesh -
How to restore a database from backup taken in standby database
Its our environment standard to run backup in standby database.
Now we have to perform refresh production database to UAT database.
I have performed normal refresh/duplicate. Is there any additional procedures need to be followed to perform refresh from standby database backupRMAN Restoration to New Server with Different Directory and New Database Name
In this case, I have an existing production database with RMAN Level 0 backup:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'C:\flash_recovery_area\galaxy\backupsets\autobackup\SAMSUNG-ctl_%F';
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'C:\flash_recovery_area\galaxy\backupsets\level0\level0-%d-%T-%U' MAXPIECESIZE 4G;
DELETE NOPROMPT ARCHIVELOG ALL COMPLETED BEFORE 'SYSDATE - 7';
SHOW ALL;
REPORT SCHEMA;
LIST BACKUP OF DATABASE;
REPORT NEED BACKUP;
REPORT UNRECOVERABLE;
LIST EXPIRED BACKUP BY FILE;
LIST ARCHIVELOG ALL;
REPORT OBSOLETE;
CROSSCHECK BACKUP DEVICE TYPE DISK;
CROSSCHECK COPY OF ARCHIVELOG ALL;
DELETE NOPROMPT EXPIRED BACKUP DEVICE TYPE DISK;
DELETE NOPROMPT OBSOLETE DEVICE TYPE DISK;
RUN {
sql 'alter system archive log current';
BACKUP INCREMENTAL LEVEL 0 DATABASE PLUS ARCHIVELOG DELETE INPUT;
LIST BACKUP OF DATABASE;
REPORT NEED BACKUP;
REPORT UNRECOVERABLE;
LIST EXPIRED BACKUP BY FILE;
LIST ARCHIVELOG ALL;
REPORT OBSOLETE;
CROSSCHECK BACKUP DEVICE TYPE DISK;
CROSSCHECK COPY OF ARCHIVELOG ALL;
DELETE NOPROMPT EXPIRED BACKUP DEVICE TYPE DISK;
DELETE NOPROMPT OBSOLETE DEVICE TYPE DISK;
The backupsets will be restored into a new server with different file structure. The database will also be different. In the new server, I have created a blank database (SID or CUSTOM database with the name DBGRID). This is easier so I won't have to create any directories, user ORADIM or create new PWFile.
This document assumes that a blank (starter) database has been created in the new server. The RDBMS version is the same as the source database.
In this example, the source database name is GALAXY and the target database name is DBGRID.
Let me know if you have any feedback or comments. All I want is to share these steps with you and make it better so we can help other DBA's as well.
Steps start here
-->
ORIGINAL DATABASE: GALAXY
DUPLICATE DATABASE: DBGRID
FROM THE SOURCE DATABASE (GALAXY)
1. Backup the database using RMAN incremental backups.
2. Check the RMAN logs generated and look for the result of the command:
C:\Users\Administrator>set ORACLE_SID=GALAXY
C:\Users\Administrator>rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Aug 1 06:55:08 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: GALAXY (DBID=3578870300)
RMAN> report schema;
using target database control file instead of recovery catalog
Report of database schema for database with db_unique_name GALAXY
List of Permanent Datafiles
===========================
File Size(MB) Tablespace RB segs Datafile Name
1 680 SYSTEM *** C:\ORACLE\ORADATA\GALAXY\SYSTEM01.DBF
2 510 SYSAUX *** C:\ORACLE\ORADATA\GALAXY\SYSAUX01.DBF
3 140 UNDOTBS1 *** C:\ORACLE\ORADATA\GALAXY\UNDOTBS01.DBF
4 5 USERS *** C:\ORACLE\ORADATA\GALAXY\USERS01.DBF
5 106 EXAMPLE *** C:\ORACLE\ORADATA\GALAXY\EXAMPLE01.DBF
6 2048 ALLINDEX *** C:\ORACLE\ORADATA\GALAXY\ALLINDEX01.DBF
List of Temporary Files
=======================
File Size(MB) Tablespace Maxsize(MB) Tempfile Name
1 29 TEMP 32767 C:\ORACLE\ORADATA\GALAXY\TEMP01.DBF
This command shows all the physical database files that will be backed-up by the current RMAN job.
List the online redolog files:
SQL> select * from v$logfile;
GROUP# STATUS TYPE MEMBER IS_
3 ONLINE C:\ORACLE\ORADATA\GALAXY\REDO03A.LOG NO
3 ONLINE C:\ORACLE\ORADATA\GALAXY\REDO03B.LOG NO
2 ONLINE C:\ORACLE\ORADATA\GALAXY\REDO02A.LOG NO
2 ONLINE C:\ORACLE\ORADATA\GALAXY\REDO02B.LOG NO
1 ONLINE C:\ORACLE\ORADATA\GALAXY\REDO01A.LOG NO
1 ONLINE C:\ORACLE\ORADATA\GALAXY\REDO01B.LOG NO
6 rows selected.
3. Since the target server has different structure, it is easier to use a pfile to startup the database rather than restoring the spfile from backup.
C:\Users\Administrator>set ORACLE_SID=GALAXY
C:\Users\Administrator>sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Wed Aug 1 06:56:14 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> create pfile='C:\TEMP\initGALAXYrman.ora' from spfile;
File created.
4. Edit the pfile to have the following parameters:
(These parameters has been edited to fit the target database requirements)
galaxy entries has been changed to dbgrid. Directories has been corrected as well.
dbgrid.__db_cache_size=192937984
dbgrid.__java_pool_size=4194304
dbgrid.__large_pool_size=4194304
dbgrid.__oracle_base='D:\app\Administrator'#ORACLE_BASE set from environment
dbgrid.__pga_aggregate_target=281018368
dbgrid.__sga_target=524288000
dbgrid.__shared_io_pool_size=0
dbgrid.__shared_pool_size=301989888
dbgrid.__streams_pool_size=4194304
*.audit_file_dest='D:\app\Administrator\admin\DBGRID\adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='D:\oradata\DBGRID\control01.ctl','D:\oradata\DBGRID\control02.ctl'
*.db_block_size=8192
*.db_domain=''
Leave as it is for now --> *.db_name='GALAXY'
*.db_recovery_file_dest='D:\fra\backupsets\duplicate'
*.DB_RECOVERY_FILE_DEST_SIZE=4G
*.diagnostic_dest='D:\app\Administrator'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=DBGRIDXDB)'
*.job_queue_processes=1000
*.log_archive_dest_1='location=D:\fra\backupsets\archs'
*.log_buffer=10485760
*.memory_target=805306368
*.open_cursors=300
*.processes=800
*.remote_login_passwordfile='EXCLUSIVE'
*.session_cached_cursors=300
*.sessions=885
*.undo_tablespace='UNDOTBS1'
Make sure that all the directory values in this edited pfile are existing in the target server.
5. Copy all the RMAN backup pieces generated in the source database. Transfer the edited pfile as well. Make sure that all directories presented in the pfile exists in the target server.
In this example, RMAN backupsets are located at:
Backupsets:
Level0 and Level1 = D:\fra\backupsets\duplicate\level0 , D:\fra\backupsets\duplicate\level1
Controlfile and Spfile Autobackup = D:\fra\backupsets\duplicate\autobackup
Edited pfile initGALAXYrman= C:\TEMP\initDBGRIDnew.ora
FROM THE TARGET DATABASE (DBGRID)
6. Connect to RMAN and perform database duplication using RMAN backup restoration
C:\Users\Administrator>rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Aug 1 07:26:45 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database (not started)
RMAN> set dbid = 3578870300; --> THIS IS THE DBID OF THE SOURCE DATABASE!
executing command: SET DBID
RMAN> startup nomount pfile='C:\TEMP\initDBGRIDnew.ora'; -->restore the edited pfile
Oracle instance started
Total System Global Area 535662592 bytes
Fixed Size 1375792 bytes
Variable Size 327156176 bytes
Database Buffers 192937984 bytes
Redo Buffers 14192640 bytes
RMAN> restore controlfile from 'D:\fra\backupsets\duplicate\autobackup\SAMSUNG-CTL_C-3578870300-20120801-00'; -->restore the correct controlfile
Starting restore at 01-AUG-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=19 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
output file name=D:\ORADATA\DBGRID\CONTROL01.CTL
output file name=D:\ORADATA\DBGRID\CONTROL02.CTL
Finished restore at 01-AUG-12
RMAN> alter database mount; -->mount the database
database mounted
released channel: ORA_DISK_1
RMAN> catalog start with "D:\fra\backupsets\duplicate";
--> catalog the location of the backup pieces to make it known to the control file
Starting implicit crosscheck backup at 01-AUG-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=19 device type=DISK
Crosschecked 3 objects
Finished implicit crosscheck backup at 01-AUG-12
Starting implicit crosscheck copy at 01-AUG-12
using channel ORA_DISK_1
Finished implicit crosscheck copy at 01-AUG-12
searching for all files in the recovery area
cataloging files...
no files cataloged
searching for all files that match the pattern D:\fra\backupsets\duplicate
List of Files Unknown to the Database
=====================================
File Name: D:\FRA\BACKUPSETS\duplicate\autobackup\SAMSUNG-CTL_C-3578870300-20120801-00
File Name: D:\FRA\BACKUPSETS\duplicate\level0\LEVEL0-GALAXY-20120801-01NHGTGV_1_1
File Name: D:\FRA\BACKUPSETS\duplicate\level0\LEVEL0-GALAXY-20120801-02NHGTIA_1_1
File Name: D:\FRA\BACKUPSETS\duplicate\level0\LEVEL0-GALAXY-20120801-03NHGTMT_1_1
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: D:\FRA\BACKUPSETS\duplicate\autobackup\SAMSUNG-CTL_C-3578870300-20120801-00
File Name: D:\FRA\BACKUPSETS\duplicate\level0\LEVEL0-GALAXY-20120801-01NHGTGV_1_1
File Name: D:\FRA\BACKUPSETS\duplicate\level0\LEVEL0-GALAXY-20120801-02NHGTIA_1_1
File Name: D:\FRA\BACKUPSETS\duplicate\level0\LEVEL0-GALAXY-20120801-03NHGTMT_1_1
RMAN> list backup summary; -->check your backup they are now known
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
1 B A A DISK 01-AUG-12 1 2 NO TAG20120801T011054
2 B 0 A DISK 01-AUG-12 1 2 NO TAG20120801T011137
3 B A A DISK 01-AUG-12 1 2 NO TAG20120801T011405
RMAN> list archivelog all; -->list you archivelog for point in time recovery
List of Archived Log Copies for database with db_unique_name GALAXY
=====================================================================
Key Thrd Seq S Low Time
26 1 29 A 01-AUG-12
Name: D:\FRA\BACKUPSETS\ARCHS\ARC0000000029_0785167457.0001
Perform database restoration and recovery. The sequence number is Seq+1 for complete recovery, so that will be 29 + 1 = 30. You can also do recovery via SCN or time based recovery.
Remember in the previous step: RMAN> REPORT SCHEMA;
Each datafile has a corresponding datafile number.
Follow the format to convert them into their respective new restoration directory in the target server.
SET NEWNAME has the format:
SET NEWNAME FOR DATAFILE [FILE NUMBER IN THE REPORT SCHEMA COMMAND] TO
‘[NEW LOCATION AND FILENAME OF THE DATAFILES]’;
RMAN> run {
2> SET UNTIL SEQUENCE 30 THREAD 1;
3> set newname for datafile 1 to 'D:\oradbgrid\oradata\SYSTEM01.DBF';
4> set newname for datafile 2 to 'D:\oradbgrid\oradata\SYSAUX01.DBF';
5> set newname for datafile 3 to 'D:\oradbgrid\oradata\UNDOTBS01.DBF';
6> set newname for datafile 4 to 'D:\oradbgrid\oradata\USERS01.DBF';
7> set newname for datafile 5 to 'D:\oradbgrid\oradata\EXAMPLE01.DBF';
8> set newname for datafile 6 to 'D:\oradbgrid\oradata\ALLINDEX01.DBF';
9> restore database;
10> switch datafile all;
11> recover database;
12> }
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 01-AUG-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=19 device type=DISK
channel ORA_DISK_1: starting datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_DISK_1: restoring datafile 00001 to D:\oradbgrid\oradata\SYSTEM01.DBF
channel ORA_DISK_1: restoring datafile 00002 to D:\oradbgrid\oradata\SYSAUX01.DBF
channel ORA_DISK_1: restoring datafile 00003 to D:\oradbgrid\oradata\UNDOTBS01.DBF
channel ORA_DISK_1: restoring datafile 00004 to D:\oradbgrid\oradata\USERS01.DBF
channel ORA_DISK_1: restoring datafile 00005 to D:\oradbgrid\oradata\EXAMPLE01.DBF
channel ORA_DISK_1: restoring datafile 00006 to D:\oradbgrid\oradata\ALLINDEX01.DBF
channel ORA_DISK_1: reading from backup piece D:\FRA\BACKUPSETS\DUPLICATE\LEVEL0\LEVEL0-GALAXY-20120801-02NHGTIA_1_1
channel ORA_DISK_1: piece handle=D:\FRA\BACKUPSETS\DUPLICATE\LEVEL0\LEVEL0-GALAXY-20120801-02NHGTIA_1_1 tag=TAG20120801T011137
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:02:06
Finished restore at 01-AUG-12
Starting recover at 01-AUG-12
using channel ORA_DISK_1
starting media recovery
archived log for thread 1 with sequence 29 is already on disk as file D:\FRA\BACKUPSETS\ARCHS\ARC0000000029_0785167457.0001
archived log file name=D:\FRA\BACKUPSETS\ARCHS\ARC0000000029_0785167457.0001 thread=1 sequence=29
media recovery complete, elapsed time: 00:00:01
Finished recover at 01-AUG-12
Log in to SQL*Plus to recreate the redolog files.
Format:
ALTER DATABASE RENAME FILE ‘[OLD REDOLOG LOCATION]’ TO ‘[NEW REDOLOG LOCATION]’;
C:\Users\Administrator>sqlplus "/ as sysdba"
SQL*Plus: Release 11.2.0.1.0 Production on Wed Aug 1 08:54:27 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select instance_name, status from v$instance;
INSTANCE_NAME STATUS
dbgrid MOUNTED
SQL> ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\GALAXY\REDO03A.LOG' TO 'C:\oracle\oradata\dbgrid\REDO03A.LOG';
Database altered.
SQL> ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\GALAXY\REDO03B.LOG' TO 'C:\oracle\oradata\dbgrid\REDO03B.LOG';
Database altered.
SQL> ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\GALAXY\REDO02A.LOG' TO 'C:\oracle\oradata\dbgrid\REDO02A.LOG';
Database altered.
SQL> ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\GALAXY\REDO02B.LOG' TO 'C:\oracle\oradata\dbgrid\REDO02B.LOG';
Database altered.
SQL> ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\GALAXY\REDO01A.LOG' TO 'C:\oracle\oradata\dbgrid\REDO01A.LOG';
Database altered.
SQL> ALTER DATABASE RENAME FILE 'C:\ORACLE\ORADATA\GALAXY\REDO01B.LOG' TO 'C:\oracle\oradata\dbgrid\REDO01B.LOG';
Database altered.
Open the database in resetlogs option. Create spfile from the edited pfile then bounce the database.
RMAN> alter database open resetlogs;
database opened
SQL> create spfile from pfile='C:\TEMP\initDBGRIDnew.ora';
File created.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 535662592 bytes
Fixed Size 1375792 bytes
Variable Size 327156176 bytes
Database Buffers 192937984 bytes
Redo Buffers 14192640 bytes
Database mounted.
Database opened.
SQL> select instance_name, status from v$instance;
INSTANCE_NAME STATUS
dbgrid OPEN
Create a new TEMP tablespace, make this as the new default temporary tablespace. Drop the old TEMP tablespace. Restart the database.
SQL> CREATE TEMPORARY TABLESPACE TEMP01 TEMPFILE 'D:\oradbgrid\oradata\TEMP0101.dbf' SIZE 200M;
Tablespace created.
SQL> ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP01;
Database altered.
SQL> drop tablespace TEMP including contents and datafiles;
Tablespace dropped.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance sta -
Rebuilding RAC database from RAC database
Hi All,
Oracle : 10.2.0.4
OS : Linux
I am rebuilding a new RAC database from different RAC database manually from hot bacckup.
Everthing is ok for me but when we try to recoer the new db it will asks you archs to apply.
It will prompt you for the first arch from any thread , after applying the 1st it will not prompt you without giving next arch sequence no from any thread.
I spent time on it and finally get to know that its an oracle bug .
I just want to know wheather is thr any options for us by which we can know the arch sequence no.
Any suggestions wud b appreciated.
Thanks.
VirenderHi Hemant,
I know the v4recovery_log option to check the next archive.
ut below is the situation m facing.
M trying to apply the arch asked by oracle but still its not applying it and showig it in v$recovery_log. Kindly check teh below output:
SQL> startup nomount
ORACLE instance started.
Total System Global Area 5033164800 bytes
Fixed Size 2090880 bytes
Variable Size 2097154176 bytes
Database Buffers 2919235584 bytes
Redo Buffers 14684160 bytes
SQL> @controlfile.sql
Control file created.
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 135795310 generated at 03/25/2010 16:05:37 needed for thread
3
ORA-00289: suggestion :
/etrade/plt/eeo/dbs/PLTEC2R/arch/arch_PLTEC2R_3_1585_710012162.log
ORA-00280: change 135795310 for thread 3 is in sequence #1585
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/etrade/plt/eeo/rac/PLTEC2R1/bkup/bkup1/arch_PLTEP2R_3_1585_710012162.log
ORA-00279: change 135795310 generated at needed for thread 1
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/etrade/plt/eeo/rac/PLTEC2R1/bkup/bkup1/arch_PLTEP2R_3_1586_710012162.log
ORA-00325: archived log for thread 1, wrong thread # 3 in header
ORA-00334: archived log:
'/etrade/plt/eeo/rac/PLTEC2R1/bkup/bkup1/arch_PLTEP2R_3_1586_710012162.log'
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01195: online backup of file 1 needs more recovery to be consistent
ORA-01110: data file 1:
'/etrade/plt/eeo/dbs/PLTEC2R/data1/PLTEC2R.system_01.dbf'
SQL> select * from v$recovery_log;
THREAD# SEQUENCE# TIME
ARCHIVE_NAME
3 1585 25-MAR-10
/etrade/plt/eeo/dbs/PLTEC2R/arch/arch_PLTEC2R_3_1585_710012162.log -
Cloning of Database from RAC to non-RAC
We have 9i RAC database with Oracle 11.5.9 application,
Our management wants one new non-rac instance for Reporting purpose. They want Reporting instance should be re-fresh every night with automated process. I am looking for the help is there any way we can refresh the databse from RAC enviornement to non-rac enviornment. Please help us.
Thanks
Regards
Raj Sachdeva
Oracle Certified Master.Hi;
Presently we are following RMAN duplicate database cloning from RAC asm to (non RAC)non asm database of size 1TB.
If suppose if our databse is 3TB or More. then is there method that we can minimize the cloning time. If so please let me know.We have 4 Tb RAC+ASM and we also follow same method. I belive there is no faster method, at least we can not find :)
Regard
Helios -
Partial Restoration of Tablespace from RAC instance to non-RAC instance
when i am trying to restore tablespace from RAC environment to Non-RAC i got below error in my log
channel aux1: starting datafile backup set restore
channel aux1: restoring control file
channel aux1: reading from backup piece c-1840232663-20110405-01
channel aux1: ORA-19870: error while restoring backup piece c-1840232663-20110405-01
ORA-19507: failed to retrieve sequential file, handle="c-1840232663-20110405-01", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
sbtrestore: Job[0] thread[18841]: InitializeCLRestore() failed.
kindly revert,
Thanks & Regards,
MJI am not sure what you mean by "OS replication".
Whether you use RAC or a Failover Cluster, the database has to be on Shared Storage (which requires no "replication").
RAC licence costs are higher than that for a Failover Cluster because both instances have to licenced and the RAC option has to be purchased.
Of course, if the two nodes together are limited to 4 CPUs, you could consider Standard Edition to reduce the licencing costs.
DBA skills requirements are also higher for RAC.
With respect to your question "...will be sufficient for the avaialability purposes" it really depends on what your requirements are. People use RAC for Avaialability when it really is better positioned for Scalability. If you want only availability and can afford a few minutes downtime, and each node in the cluster can individually handle the user/batch loads, a Failover Cluster would suffice.
I suggest that you raise this question in the "Database - General" forum : General Database Discussions
or the "Real Application Clusters" forum : Real Application Clusters
"Replication" is the wrong forum for such a question.
When you do re-raise your question, please clarify your understinding of "OS replication".
Hemant K Chitale
Hemant K Chitale -
Restore wss_content database from network farm to VM
Hi
Here is my set up: We have a SharePoint 2013 farm on our network. An extranet solution is being developed by a third party which they are deploying to this server. We have a bespoke Contact Management system that has some integration with our existing
SharePoint 2007 extranet. I need to test the integration process also works with the new 2013 extranet. I have therefore set up a couple of VMs - one local domain controller and one the runs the CMS and current extranet. The third party have sent me a copy
of their SharePoint development VM which is it's own DC. I have set up a trust between the two domains.
I need to update my local SharePoint 2013 VM with the latest solution/content from the farm on our network. The third party have suggested doing a backup and restore using Central Admin. However, I am having problems restoring the wss_content database
and get a message that says 'The login is from an untrusted domain and cannot be used with Windows authentication'
The account I am using for the import in the VM is a Farm Administrator, the account the Central Admin application pool is running under and is sysadmin on the database.
Any suggestions on what I could try would be much appreciated. Thanks.Hi Qaaweb,
For this issue, I need to verify the things below with you:
1. How did you restore the database?
2. Was there an existing database with the same name?
If yes, you need to make sure that the user account is a member of the sysadmin and dbcreator fixed server roles and the owner (dbo) of the database.
If not, you need to make sure that the user account must have CREATE DATABASE permissions to be able to execute RESTORE.
Best regards.
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Restoring the database from Coldbackup
Hi Gurus,
I have a cold back up files belongs to oracle 9i on Solaris 5.10. I wanted to restore the database and need to upgrade the Oracle 10g (10.2.0.3.0) on linux.
All these process need to handle with out RMAN. What are the prerequisite information need to collect on source and target systems.
Please guide me.
Thanks,
TippuAzar wrote:
Better install Oracle 10g on the new server and after import oracle 9i database into new server database.I would say that this depends on database size and database downtime that can be accepted: for small database and no short downtime constraint, I agree but for large database and limited downtime constraint this may not be a good choice. -
Migrate database from IBM DB2 to ORACLE
Hi oracle professionals,
Currently database resides in IBM DB2...
We need to migrate Database to oracle ...
Thanks in advance
PawanHi,
Kindly refer
Oracle SQL*Developer - which is free to use and download -
http://www.oracle.com/technetwork/developer-tools/sql-developer/overview/index.html
Oracle Database Migration Technology -
http://www.oracle.com/technetwork/database/migration/index-084442.html
Migrating from IBM DB2 LUW to Oracle -
http://www.oracle.com/technetwork/database/migration/db2-084087.html
IBM DB2/400 V4R3 & V4R5 can be migrated using the original Migration Workbench v10.1.0.4 available from here -
http://www.oracle.com/technetwork/topics/index-095746.html
Also article
Migrating From IBM DB2 UDB to Oracle (Doc ID 1148493.1)
Thanks,
Krishna
Maybe you are looking for
-
We are using Skype 6.18 Business version and requi...
We are using Skype 6.18 Business version, and require .admx and .adm files for GPO setting. Kindly provide us with the lastest .admx and .adm files as soon as possible. We need to provide the support to clients and the requirement is on priority. Tha
-
Additional pages in multipart spool requests.
Hello, does anybody also encountered the problem, that for some printers additional pages between the files of a multipart spool request are printed? The page just contains @PJL. It occurs with our own printouts and also with FP_TEST_00. Device type
-
What guitar distortion do you guys recommend if I want to get a Jimmy Eat World sound in Logic Pro?
I am looking for a nice Alternative Rock sound comparable to the likes of Jimmy Eat World, saosin, etc... Looking for this sound in Logic pro and just need help. Any answers?
-
Any idea why my Music/iTunes folder in the finder would be 22 GB, while in iTunes it indicates my entire collection as being 17 GB? I suspect there are files in my Music/iTunes folder that are not in use by iTunes - that at some point large video fil
-
CS5 problem: Merge to HDR Pro & Incorrect EV values
Hi, I'm trying to use the HDR Pro option on Photoshop but have yet to find a way to circumvent an issue I'm having. The game Gran Turismo 5 on the Playstaiton 3 has a photo mode and allows you to edit camera settings within the game and then export y