Restore after soft reset not working

I'm hating my 5800 more and more by the day.
I just did a soft reset in order to overcome the 'voice system error'.
Then I did a restore of all the contacts, calender etc.
What did it restore?
NOTHING!
Now what am I supposed to do?! Thanks again nokia......
Nokia might know what they're doing with traditional 'mobile phones' but when it comes to smartphones they are clueless.

I went into 'applications' on the phone and did an update (of about 7 things)
I then reapplied the restore and it's "working" now i.e. the contacts are back in place but it still gets the 'voice system error'
however the stupid POS thing has seemingly lost all of the applications I installed
again,
THANKS NOKIA!

Similar Messages

Soft reset not working...screen black, led blinking

so basically...i soft reset my phone...(by the way this upgrade is a pain!)...and the screen went black (normal), but the led light just kept blinking. i thought maybe because of the upgrade it needed more time or something.
so i decided to leave my phone and go get ready for work thinking by the time i'm ready to jet, it would be up and running...
45 minutes later...NOTHING. still black. still blinking. so i did a hard reset which worked just fine.
but i had to soft reset my phone again (why? the alerts sounds stopped working...resetting it makes them work again)....but same deal: black screen, blinking led.
anyone know whats going on? is soft reset just dead now with the new upgrade?
btw - the blackberry folks know about the alert sounds issue...it's currently being looked at.
anyway...HELP!

Hey kristinealcatraz,
Welcome to the BlackBerry Support Community Forums.
Depending on the LED flashing it could be boot rom failure.
What BlackBerry are you using?
I'd suggest to follow this article to get your BlackBerry up and running: www.blackberry.com/btsc/KB10144
Let me know if you run into any problems with the application load.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

Make sure the silent switch is not set to mute. If you can see the red dot, it is on mute.
It may think you have headphones plugged in, try plugging and unplugging a wired headset a few time.
The next step would be to restore as new.
If none of that works, a warranty exchange would be the resolution.

Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

My ipod classic 160gb will be playing fine then it sometimes freezes up or start shuffling through the songs not playing at all. After i reset it works ok for a while then same thing. Bought this so i could control through my steering wheel/radio.

I sure hope someone can help me with these ipod classic 160gb issues.
My ipod classic 160gb will be playing fine and then freeze up (unable to move around in it at all) and i have to reset it. This happens constantly whether in my car or when i listen at work. After i reset it works ok for a while then eventually requires another reset.
Another problem is that it will be playing fine and then start shuffling through songs without playing them. The songs that get shuffled work fine in the itunes program but not on the device. A reset does not correct the problem with these particular songs.
Also, sometimes when it is working and not freezing up or shuffling through, it will appear that a song is playing (in fact it says "now playing"), the song titlte is scrolling, but the song progression bar does not move. The count up in front of the bar stays at 0:00, and the count down at the end of the bar stays at the song length minutes not counting down. After I reset, it works fine and all the songs will play.
The reason I got this thing was because i can control it through my steering wheel/radio while i'm driving. I previously had a Zune 80gb which i'm glad I held on to. I have over 6600 songs (so I'm obviously a serious music listener and obviously frustrated), but only about 10 songs were downloaded through itunes, the rest I either ripped or downloaded from other site. From what i've been reading it sounds like there's a lot of ipod owners out there experiencing similar problems. Does anyone have any suggestions to resolve these issues for me and everyone else? I got my first iphone 8 months ago, then the ipod and was considering an ipad. But in light of my ipod issues.....
I hope someone can help me and convince me it wasn't a mistake to go Apple! Thanks!!

I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

I have this problem as well. The screen is black . i can.t get it to respond.Power home soft reset didnt work. Itunes could detect any sync apps. I used my home phone to call my iphone and on my home phone i can hear the calling tone.But my iphone didn'

The screen is black . i can.t get it to respond.Power + home soft reset didnt work. Itunes could detect any sync apps. I used my home phone to call my iphone and on my home phone i can hear the calling tone.But my iphone didn't ring/screen did not light up. Its a iphone 4. Any ideas how to fix this?

If the basics (restart, reset, restore from backup, restore as new) don't work, you'll need to bring the phone to Apple for evaluation

My iPod 5 will not sync ANY music. All my music was on prior to syncing. The sync deleted all my music. I can now no longer add any music. I have the "sync music" checked. Restoring factory settings did not work. Any thoughts?

All my music was on prior to syncing. The sync deleted all my music. I can now no longer add any music. I have the "sync music" checked. Restoring factory settings did not work. Any thoughts?

When you synced with iTunes It would have tried to replace the music on the iPhone with what is on the computer. which is what happens when you sync with iTunes.
If the songs are purchased you can re-downloaded them Pretty easily. You mentioned that you still see the songs and that you could not play them. Do they have a Cloud symbol next to them? If so this means that you can download them but that they are not on the device.

HT4623 My iPhone is locked with the connect to iTunes logo on screen. I have connected and trying to restore but it is not working. I have turned it on and off but to no avail.

This has happened doing the latest software update. I think I accidentally deleted iTunes before doing the latest update in trying to make room on the phone when it came up with limited space.
My iPhone is locked with the connect to iTunes logo on screen. I have connected and trying to restore but it is not working. I have turned it on and off but to no avail.
The restore says two hours to down load. Has anyone else had this problem.

iOS: Unable to update or restore

HT3728 after soft resetting how to set a new password to my airport express

after soft resetting the airport exppress how to set a new password to my airport express

Hello, MevanK.
Thank you for the question. You may find this article helpful in changing or creating a password for your AirPort Express.
AirPort Utility 6.x: Password-protect your wireless network
http://support.apple.com/kb/PH5119
Cheers,
Jason H.

I have two iphones , i lost one and entered to find my iphone and as mistake i block both and delate all the data of both. how can i get it on, im trying to restore it , but its not working ...

i have two iphones , i lost one and entered to find my iphone and as mistake i block both and delate all the data of both. how can i get it on, im trying to restore it , but its not working ...

Hi Roger
Thank you for your reply.
My original feed is: http://casa-egypt.com/feed/
However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
Is there any way to change the feed in itunes? The only feed I have now is http://feeds.feedburner.com/CasaEgyptStation
I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
I know that I missed things up but I still have hope in working things out.
Thanks is advance.
Dina
Message was edited by: dinadik

SM36/37: Specification "After Job" does not work for Daily "periodcity"

I reviewed http://help.sap.com/saphelp_nw04/helpdata/en/20/2d513897110872e10000009b38f889/content.htm, which states what I am trying to do should work, but it does not.
Here's the deal:
1. I have two jobs: "A" and "B".
2. "A" runs Daily.
3. I set-up job "B" to run "After job" "A" in my SM36 definition.
Job "B" will run the next day, but never runs again after that even though job "A" continues to run "Daily" as it should.
Further info:
1. We have "Event-triggered" jobs that run fine, but the "After Job" designation doesn't seem to work ongoingly.
2. I can review both jobs "A" and "B" for any "Predecessor" or "Successor" jobs, and, the first jobs to run after the initial set-up DO reference each other (in other words, let's say I schedule job "B" to run "After job" "A" on Tuesday. After Tuesday's run, Job "A" sees job "B" as it's "Successor" job and job "B" sees job "A" as it's "Predecessor" job), but the definition doesn't last into the next day ONLY FOR JOB "B" (as I mentioned, job "A" always runs fine).
3. I can't set the "periodcity" for job "B" because, once I flag it to run "After Job" "A", the "period" options disappear.
4. One final tidbit: the variant for job "B" has a "key date" specified so the date is dynamic for each day the job runs. I can set up job "B" to run "Daily" with this variant and it runs fine, but I wanted it to run AFTER job "A" so it never runs if job "A" doesn't run. (At this point, it's becoming a matter of principal!)
Here's my question:
Why won't job "B" continue to run "Daily" after job "A" (a "Daily" job) runs?
Thanks in advance,
Lara

Please close this thread since you posted the same question here:
[SM36/37: Specification "After Job" does not work for Daily "periodcity"|SM36/37: Specification "After Job" does not work for Daily "periodcity";

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

did ae install without problem? check the install logs to be sure (Troubleshoot with install logs | CS5, CS5.5, CS6, CC)
if it did, what do you see when clicking the executable?

Anlysis authorization implemented after Cascading is not working

Anysis authorization implemented after Cascading is not working.
Example: i have 3 dropdownboxes in WAD . Frist dropdownbox State, second dropdownbox District, third dropdownbox Town.In the first dropdown box i selected state AP ,it should show only districts in AP in the second dropdownbox.
But it is not showingin the second dropdownbox.
Please help me

Hi Priya,
The issue may be due to the SQL Reporting Services maximum number of parameter items. We can try to add following code to Web.config file to resolve the issue.
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="30000" />
<add key="aspnet:MaxJsonDeserializerMembers" value="30000" />
</appSettings>
(Note: We can according to our requirement to set these values. After that, restart all SQL Server services. )
By default, the Web.config file is located in:
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager
C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer
More detail information, you can refer to the article about SQL Reporting Services maximum number of parameter items.
http://sqlsrv4living.blogspot.in/2012/10/sql-reporting-services-maximum-number.html
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

LOCK THE USER AFTER X ATTEMPTS --NOT WORKING?

LOCK THE USER AFTER X ATTEMPTS --NOT WORKING
OpenSSO -->Configuration-->Authentication -->Core -->Login Failure Lockout Count:( 3 ) --> Warn User After N Failures: ( 4)--> Email Address to Send Lockout Notification: --> [[email protected]|mailto:[email protected]]
I tried above step but failed to achieve LOCKING the ACCOUNT...
Could some one please help me...

This only works if you use the LDAP auth module.

HT4946 I backed up and encrypted with password but on restore the password does not work. Advice

I backed up and encrypted with password but on restore the password does not work. Advice

After a HD failure on my 2009 iMac,, fittgyed new oner, installedf os (tiger), from original disk, restored all documents etc. changed password with disk utility. over 48 hrs re3setting permissions so switched off. all seemed ok. downloaded combined os updates. Now my password does not work. tried rersetting, no go. Terminal does not have rest password on.
Any suggestions please

Restore after soft reset not working

Similar Messages

Maybe you are looking for