Restore and consolidate multiple libraries from DVD

Hi,
although I think this is probably a common question I have yet to find an answer in the forums.
To free some HDD space, I have backed up parts of my iPhoto 09 lib to DVD and deleted them from the library. Of course, some albums that had photos of these parts in them, are now incomplete.
Meanwhile I have bought a bigger HDD that could accomodate the whole library again. Is there a way to restore the photos from those DVDs to get back to the lib I had before? To even complete the albums again would be best.
But so far, when I reimport the pictures from DVD, iPhoto does not even recognize modified pictures and their originals, they are each shown as separate pictures.
Sigh, any help?

Copy the Library intact from the DVD to the Desktop and then use the paid version of iPhoto Library Manager ($20) to merge them.
Or, when you see the disk show up in the iPhoto Window drag the Events from the disk to the Library heading on the left of the iPhoto Window.
Regards
TD

Similar Messages

HT201413 I have restored and updated my ipod from recovery mode however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again?

I have restored and updated my ipod from recovery mode, however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again? I have updated and restored 5 times! When connected to itunes it only shows the summary page saying ipod in recovery mode.

Fixed it!
1. Made sure itunes software was up to date
2. Pressed and held 'home' button and 'on-off' button at the same time for about 10 seconds till ipod reset (I hadn't done this step previously)
3. Connected to itunes
4. Pressed restore and update ipod
Update successful and ipod taken out of recovery mode

Consolidate multiple libraries including ratings, playlists ...e.t.c ????

hi all,
i got crazy. i have started for a long time ago with several installations on different computers with itunes. (i know, bad decision)
i would like to consolidate all libraries into a new one including ratings, infos, playlists e.t.c
i don`t know how to do that, have anybody any idea ?
cheers
apathic

I have never tried this, but in theory it should work:
If you want to move all of the music files to one hard disk and combine all the library files into one, try this:
1. Connect your external drive to computer A, and change your music folder location (iTunes prefs > Advanced > General) to be a folder on you external drive.
2. Choose Consolidate Library from the Advanced menu. This will copy all your music files (but not ratings and playlists, that is the next part) to the external drive.
3. Once the copy has finished, choose Export Library from the File menu, and export the library file to the external drive.
4. Now connect the external drive to computer B.
5. Choose Import from the File menu in iTunes and point it to the library file on the external drive.
Does that work?

IMovie and recovery of photos from DVD

I am on Leopard and iLife 08. Sadly my disk crashed on my Macbook and I lost many photos. I had made an iMovie using video clips and photos and burnt a DVD. Can I some how copy these clips and photos back into imovie and iPhoto from the DVD? Apple could not recover any dat from the crashed disk which was only 14 months old.

a DVD has, defined by standards, a very low resolution,.. 640x480..
and the stills are transformed into 'video-files' => no 'digital export' ...
so, the easiest way is screengrabs..
but.. the DVDplayer app doesn't allow screengrabs from DVDs.
download and use for free http://www.videolan.org/
insert your DVD, play it, pause it, and use the well-known commands 'apple-shift-4' to grab the portion you need from your screen..

Open and print multiple files from the Finder all at once.

I'm trying to research how to do this. In OS9 you used to be able to hi-lite multiple files (Word files for example) and just hit Command+P. This would automatically open all of the files AND print them.
I can't seem to do this in my OS X. Or can I? I can hi-lite and go to File/Print, but the computer is only opening but not printing.
Any suggestions??
iMac Mac OS X (10.4.8)

I don't know how to both "open and print" multiple files in one step. The ⌘O combination of course will open multiple items. The items remain selected so switching back to the "Finder" and dragging multiple icons onto the icon for "/Applications" > "Utilities" > "Printer Setup Utility.app" seems to cause them all to be printed to the default printer.
Alternatively, a user's "~/Library/Printers" folder contains printer icons -- I'm not sure what they are exactly, but they represent the printers set up for that account. They function pretty much like the pre-OS X "Desktop Printer" icons so dragging and dropping multiple files onto them should cause them to be printed. It may even be possible to create aliases to them on the "Desktop" to recreate "Desktop Printer" functionality. But again, this won't open the files into their applications.

HT4927 I have OS 10.7.5 and iPhoto 11 -9.4.2 . My iPhoto is (was) split into 7 libraries created via iPhoto Buddy . Two libraries are now missing marked n/a in Buddy. Exactly how may I restore these 2 specific libraries from Time Machine.

I am looking for simple step by step assistance to restore 2 missing and important (to me) libraries in iPhoto via Time Machine.
Used iPhoto Buddy to create 8 libraries and this worked well until yesterday. Now these missing libraies are just marked n/a. The other 6 appear OK.
Don't resally know what I'm doing with Time Machine it has just sat there on a separate hard drive backing up... never had to call on it before.
Thanks for any help - about 6000 images missing.

Using Time Machine
LN

Consolidate multiple libraries

I am trying to combine multiple iTunes libraries containing duplicate media files. I moved EVERYTHING to my external hard drive. What is the best way to consolidate and organize the new Music file in iTunes?

I have never tried this, but in theory it should work:
If you want to move all of the music files to one hard disk and combine all the library files into one, try this:
1. Connect your external drive to computer A, and change your music folder location (iTunes prefs > Advanced > General) to be a folder on you external drive.
2. Choose Consolidate Library from the Advanced menu. This will copy all your music files (but not ratings and playlists, that is the next part) to the external drive.
3. Once the copy has finished, choose Export Library from the File menu, and export the library file to the external drive.
4. Now connect the external drive to computer B.
5. Choose Import from the File menu in iTunes and point it to the library file on the external drive.
Does that work?

Password does not work after time machine restore and can not reset from CD

The hard drive failed on my Power Mac G5. I replaced it and restored everything from Time Machine. The two non -admin accounts I can log into fine but my password for the admin account does not. I tried resetting it booting from the OSX CD and using the password reset utility. It says it has done its thing but then I reboot and try to log in same problem. It even has the old password hint. I changed that so I could see if it worked. I tried both my account and the root account out of desperation. Any help appreciated!

Hello, there's some corruption on the HDD, try this...
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
Admin Hack...
http://www.hackmac.org/?q=node/4
Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... give the new User a different name than an existing one.

My new iPhone get restored and all the storage from my old phone got on my new phone. is there a way I can get the pictures and storage I had on my new phone?

i plugged my new iPhone into the computer for the first time and it proceeded to restore. i accidentally clicked on the storage saved on my iTunes for my old phone. so now all the storage from my old phone is on my new phone and I can't find any of the storage from my new phone. is there a way to get the pictures and data back onto my phone that i originally had ?

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
Apple ID FAQs > http://support.apple.com/kb/HT5622
SHARING iTunes MUSIC
http://macmost.com/five-ways-to-share-music-in-itunes.html

Can I do a duplicate search to delete on my ipod classic 120gb only? There are no duplicates on my itunes... I think these duplicates arose when I did a restore, and had to reload from the cloud, and my computer backup.... please help...

I have an ipod classic 120gb...
Somehow I have managed to get mutiple duplicates.....
I had a computer crash... and I restore several songs from the cloud, and from my computer backup from an external drive...
and also, from past purchases on itunes...... some songs I had loaded from my own cd collection....and songs had overlapped......
I knew I had duplicates before the crash and never took care of it.... but now of course there are more...
I have taken care of the duplicates in itunes, by deleting them one by one..... I made the mistake of checking boxes then highlighting and doing a mass delete... thinking it would only delete my check boxes.... and loss a lot of music... so had to restore backups again....
so.......
Ipod......... how do I delete duplicates from the ipod, without loosing music from my ipod... I have lost music that is still there I believe on the Ipod that is not on my itunes... but I am not sure...and I can not find a search duplicates in itunes for Ipod.... can anyone help me on this... is there a way to do it, without going through 8 days of music line by line??
Thank you

Restore the iPod and reload it from the library... Ah, but there might be media on the device that isn't in the library yes?
See Recover your iTunes library from your iPod or iOS device and a script called DeDuper which can help remove unwanted duplicates from iTunes if you end up needing to do a blanket recovery from the iPod. See this thread for background on DeDuper.
tt2

CSOM code in C # to download and upload multiple files from/to sharepoint library

Hi All,
Please help me I want to first download all my files from sharepoint library to my local folder using CSOM code .
Once downloading is completed I want to upload those files in another library .
I have done same thing using web services but need to do by CSOM now.
Thanks please provide code of peice
sudhanshu sharma Do good and cast it into river :)

By using below code I am downloading multiple documents and uploading same doc to sharepoint while uploading i want to updat emetadata of source library to destination library ..
I am able to do so but want to do now for dateandTime+metadata column as well please can you check my approach and let me know tht how to do for such kind of columns-
FileProperty.cs
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
namespace ST_9569f2fe51bd4137bb31c38b3d46455d
class FileProperty
public string Title; //single line of text
public string Description; //Multiple line of text
public string DocumentType; //choice type
public string DocumentCategory; //Choice type
public string DocumentNumber; //Single line of text
// public string DocumentStatus; //Choice
public string DocumentTitle; //single line of text
// public string CrossReference; //Multipleline type
//public DateTime PublishDate; //DateAndTime Type column
/// <summary>
/// Get the SP Document Column internal name and thier respective values
/// in key -value pair.
/// </summary>
/// <returns>The List of KeyValuePair</returns>
public List<KeyValuePair<string, string>> getColumnKeyValueListProducts()
{//Target Columns
List<KeyValuePair<string, string>> columnKeyValuePairList = new List<KeyValuePair<string, string>>();
columnKeyValuePairList.Add(new KeyValuePair<string, string>("Title", Title));
columnKeyValuePairList.Add(new KeyValuePair<string, string>("Description0", Description));
columnKeyValuePairList.Add(new KeyValuePair<string, string>("Document_x0020_Type", DocumentType));
columnKeyValuePairList.Add(new KeyValuePair<string, string>("Document_x0020_Category", DocumentCategory));
columnKeyValuePairList.Add(new KeyValuePair<string, string>("Document_x0020_Number", DocumentNumber));
//columnKeyValuePairList.Add(new KeyValuePair<string, string>("Document_x0020_Status", DocumentStatus));
columnKeyValuePairList.Add(new KeyValuePair<string, string>("Document_x0020_Title", DocumentTitle));
//columnKeyValuePairList.Add(new KeyValuePair<string, string>("Cross%5Fx0020%5FReference", CrossReference));
// columnKeyValuePairList.Add(new KeyValuePair<string, string>("Publish_x0020_Date", PublishDate));
return columnKeyValuePairList;
/* public List<KeyValuePair<string, DateTime>> getColumnKeyValueListProductsforDatenTime()
//Target Columns
List<KeyValuePair<string, DateTime>> columnKeyValuePairListdt = new List<KeyValuePair<string, DateTime>>();
columnKeyValuePairListdt.Add(new KeyValuePair<string, DateTime>("Publish_x0020_Date", PublishDate));
return columnKeyValuePairListdt;
#region Help: Introduction to the script task
/* The Script Task allows you to perform virtually any operation that can be accomplished in
* a .Net application within the context of an Integration Services control flow.
* Expand the other regions which have "Help" prefixes for examples of specific ways to use
* Integration Services features within this script task. */
#endregion
#region Namespaces
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
using Microsoft.SharePoint.Client;
using System.IO;
using System.Net;
using System.Collections.Generic;
//using System.IO;
#endregion
namespace ST_9569f2fe51bd4137bb31c38b3d46455d
/// <summary>
/// ScriptMain is the entry point class of the script. Do not change the name, attributes,
/// or parent of this class.
/// </summary>
[Microsoft.SqlServer.Dts.Tasks.ScriptTask.SSISScriptTaskEntryPointAttribute]
public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
#region Help: Using Integration Services variables and parameters in a script
/* To use a variable in this script, first ensure that the variable has been added to
* either the list contained in the ReadOnlyVariables property or the list contained in
* the ReadWriteVariables property of this script task, according to whether or not your
* code needs to write to the variable. To add the variable, save this script, close this instance of
* Visual Studio, and update the ReadOnlyVariables and
* ReadWriteVariables properties in the Script Transformation Editor window.
* To use a parameter in this script, follow the same steps. Parameters are always read-only.
* Example of reading from a variable:
* DateTime startTime = (DateTime) Dts.Variables["System::StartTime"].Value;
* Example of writing to a variable:
* Dts.Variables["User::myStringVariable"].Value = "new value";
* Example of reading from a package parameter:
* int batchId = (int) Dts.Variables["$Package::batchId"].Value;
* Example of reading from a project parameter:
* int batchId = (int) Dts.Variables["$Project::batchId"].Value;
* Example of reading from a sensitive project parameter:
* int batchId = (int) Dts.Variables["$Project::batchId"].GetSensitiveValue();
#endregion
#region Help: Firing Integration Services events from a script
/* This script task can fire events for logging purposes.
* Example of firing an error event:
* Dts.Events.FireError(18, "Process Values", "Bad value", "", 0);
* Example of firing an information event:
* Dts.Events.FireInformation(3, "Process Values", "Processing has started", "", 0, ref fireAgain)
* Example of firing a warning event:
* Dts.Events.FireWarning(14, "Process Values", "No values received for input", "", 0);
#endregion
#region Help: Using Integration Services connection managers in a script
/* Some types of connection managers can be used in this script task. See the topic
* "Working with Connection Managers Programatically" for details.
* Example of using an ADO.Net connection manager:
* object rawConnection = Dts.Connections["Sales DB"].AcquireConnection(Dts.Transaction);
* SqlConnection myADONETConnection = (SqlConnection)rawConnection;
* //Use the connection in some code here, then release the connection
* Dts.Connections["Sales DB"].ReleaseConnection(rawConnection);
* Example of using a File connection manager
* object rawConnection = Dts.Connections["Prices.zip"].AcquireConnection(Dts.Transaction);
* string filePath = (string)rawConnection;
* //Use the connection in some code here, then release the connection
* Dts.Connections["Prices.zip"].ReleaseConnection(rawConnection);
#endregion
/// <summary>
/// This method is called when this script task executes in the control flow.
/// Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
/// To open Help, press F1.
/// </summary>
public void Main()
// TODO: Add your code here
//Unpublished lib used to download files from sharepoint to local and Published library for uploading files from local to sharepoint
//var srcFolderUrl = "http://ui3dats011x:2015/sites/techunits/UnPublished%20Doc/Forms/AllItems.aspx";
//var destFolderUrl = "http://ui3dats011x:2015/sites/techunits/Published%20Documents/Forms/AllItems.aspx";
using (var ctx = new ClientContext("http://ui3dats011x:2015/sites/techunits/"))
try
List LibraryName = ctx.Web.Lists.GetByTitle("Unpublished Doc");
List LibraryName1 = ctx.Web.Lists.GetByTitle("Published Documents");
ctx.Load(LibraryName1.RootFolder);
ctx.Load(LibraryName);
ctx.ExecuteQuery();
CamlQuery camlQuery = new CamlQuery();
//Used this caml query for filtering
camlQuery.ViewXml = @"<View><Query><Where><Eq><FieldRef Name='Document_x0020_Type'/><Value Type='Choice'>Technical Unit</Value></Eq></Where></Query></View>";
Microsoft.SharePoint.Client.ListItemCollection listItems = LibraryName.GetItems(camlQuery);
ctx.Load<Microsoft.SharePoint.Client.ListItemCollection>(listItems);
ctx.ExecuteQuery();
string filename;
FileInformation fileInfo;
System.IO.FileStream outputStream;
Dictionary<string, string> itemmetadata = new Dictionary<string, string>();
foreach (var item in listItems)
if (itemmetadata.Count > 0)
itemmetadata.Clear();
ctx.Load(item);
ctx.ExecuteQuery();
ctx.Load(item.File);
ctx.ExecuteQuery();
filename = item.File.Name;
foreach (KeyValuePair<string, object> metaval in item.FieldValues.)
string metavalue = Convert.ToString(metaval.Value);
//if(String.IsNullOrEmpty(metaval.Value.ToString()))
if (!(String.IsNullOrEmpty(metavalue)))
itemmetadata.Add(metaval.Key, metaval.Value.ToString());
else
itemmetadata.Add(metaval.Key, "");
fileInfo = Microsoft.SharePoint.Client.File.OpenBinaryDirect(ctx, item.File.ServerRelativeUrl.ToString());
outputStream = new FileStream(@"C:\Users\jainruc\Desktop\Sudhanshu\ComDownload\" + filename, FileMode.Create, FileAccess.Write);
fileInfo.Stream.CopyTo(outputStream);
outputStream.Dispose();
outputStream.Close();
//Uploading
string srcpath = @"C:\Users\jainruc\Desktop\Sudhanshu\ComDownload\";
string siteName = @"http://ui3dats011x:2015/sites/techunits/";
string docLibraryName = @"http://ui3dats011x:2015/sites/techunits/Published%20Documents/Forms/AllItems.aspx";
UploadFile(srcpath, siteName, docLibraryName, itemmetadata,filename);
}//End of try
catch (Exception ex)
Dts.TaskResult = (int)ScriptResults.Success;
public void UploadFile(string srcpath, string siteName, string docLibraryName,Dictionary<string,string> metavalue,string filename)
using (ClientContext ctx = new ClientContext("http://ui3dats011x:2015/sites/techunits/"))
try
List LibraryName1 = ctx.Web.Lists.GetByTitle("Published Documents");
ctx.Load(LibraryName1.RootFolder);
ctx.Load(LibraryName1);
ctx.ExecuteQuery();
ctx.Credentials = new NetworkCredential("jainfgfgh", "Pashg8878", "mydomain");
//Loop for getting all files one by one
using (var fs = new FileStream(String.Concat(srcpath,"/",filename), FileMode.OpenOrCreate))
string fileUrl = String.Format("{0}/{1}", LibraryName1.RootFolder.ServerRelativeUrl, filename);
Microsoft.SharePoint.Client.File.SaveBinaryDirect(ctx, fileUrl, fs, true);
UpdateMetadata(fileUrl,ctx,metavalue);
//End of looping
}//End of try block
catch (Exception ex)
}//End of Using
}//End of function
public void UpdateMetadata(string uploadedfileurl,ClientContext ctx,Dictionary<string,string> mvalue)
Microsoft.SharePoint.Client.File uploadedfile = ctx.Web.GetFileByServerRelativeUrl(uploadedfileurl);
//create an object of the class holding all the properties of the document
ctx.Load(uploadedfile);
ctx.ExecuteQuery();
FileProperty fileProperty = new FileProperty();
fileProperty.Description = mvalue["Description0"];
fileProperty.Title = mvalue["Title"];
fileProperty.DocumentType = mvalue["Document_x0020_Type"];
fileProperty.DocumentCategory = mvalue["DocumentCategory"];
fileProperty.DocumentNumber = mvalue["DocumentNumber"];
fileProperty.DocumentTitle = mvalue["DocumentTitle"];
//fileProperty.PublishDate = Convert.ToDateTime(mvalue["PublishDate"]);
// fileProperty.DocumentStatus = mvalue["DocumentStatus"];
List<KeyValuePair<string, string>> columnKeyValueList;
//create a list of item need to be updated or added to sharepoint library
List<FileProperty> propertyList = new List<FileProperty>();
propertyList.Add(fileProperty);
columnKeyValueList = fileProperty.getColumnKeyValueListProducts();
ListItem item = uploadedfile.ListItemAllFields;
foreach (KeyValuePair<string, string> metadataitem in columnKeyValueList)
item[metadataitem.Key.ToString()] = metadataitem.Value.ToString();
//item["Title"] = uploadedfile.Title;
item.Update();
ctx.Load(item);
ctx.ExecuteQuery();
#region ScriptResults declaration
/// <summary>
/// This enum provides a convenient shorthand within the scope of this class for setting the
/// result of the script.
/// This code was generated automatically.
/// </summary>
enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
#endregion
sudhanshu sharma Do good and cast it into river :)

New Classic iPod will not restore and can't eject from iTunes.

Hi everybody.
I just bought a new 160 GB Classic a week ago and promptly attached it to my Windows based laptop and installed the newest firmware.
I can add shows and songs to it with no problems, but if I do, I can NOT then eject the iPod from iTunes. It says that it is being used (it's not). The iPod itself says that it is "Synchronizing" despite the fact that I have NOTHING checked to synchronize (I disabled them all).
The only way I can eject at this point is to use the Windows function of "Safely Remove Hardware". However, if I simply connect the iPod to my computer and do NOT do anything with it (ie; transfer a song, etc.) it will allow me to eject.
No matter what, when I connect my iPod to iTunes I can never Restore it. I get Error Message 1418.
When I called Apple Care they had me go and replace it but the second one does the exact same thing.
I am just wondering if any other Windows users are experiencing the same thing before I go crazy.
Again, I have the latest firmware and the latest version of iTunes.
Thanks.

1a. Your PC can read iTunes, but for some strange reason, it just ignores your iPod. You have:
a) Reset the iPod (back to factory settings)
b) Reset the ipod, by flicking the top slider on the iPod on and off, then pressing 'Menu and 'Centre button'
for 6 secondish. let go!
b) Downloaded upto date iTunes onto your pc...
c) spent hours entering all your tracks into your library
....and then nothing!
Works ok on the pc ok, but dead on the ipod.
TRY THE FOLLOWING:
1b. a) Delete iTunes from you 'Control Panel' (click on Add & Remove Software).
Note: Make sure you delete everything to do with the Apple iPod, this is very important. (I just deleted
iTunes,and believe me you will be there for days..get rid of all of it and start a fresh).
b) Reboot your pc...
c) Plug in your iPod....it should now work.
Note: If still not working, try an earlier version of iTunes e.g Ver. 7.4.3.1
READ FIRST:
2a. Somestimes people have problems with iTunes because of the clash with Microsoft Media Player.
a) All you need to do is uninstall Media Player from your PC and reboot your system.
b) Load the Latestest iTunes from the iTune & Apple site http://www.apple.com/itunes/
c) Reboot your PC iTunes, it should now work.
However, like me if you want the best of both worlds and want Media Player, you can re-install Media Player.
Personally I use Ver. 10 - it works ok with iTunes and it has majority of functions as Ver. 11 but without the
registering via redtape as they introduced with ver.11
Note: As long as you install iTunes first and then Media Player you should be ok - Media player has a sub-routine
in its programming to dominate other players - and therefore causes you problems, without telling you why....'Nice One Bill Gates!'
but if say, you have installed iTunes FIRST then for the sub-routine seems to ignore it....strange huh!
Try it....what have you got to lose?
N. G Wilcox 10/12/07

How to loop and add multiple records from db in .pdf using cfdocument

I have a query that pulls a users information (Id, FirstName,
LastName, Title,etc). I then use cfdocument to output a person's
biography into a pdf. This is great, because we no longer have to
manually create bios, as they are now all dynamically generated.
The problem I have now is that we want to be able to select
multiple users and create a .pdf with each of their bios included
in the one pdf.
How do I loop thru records from a sql database in a
cfdocument that includes a header and footer in cfdocument items,
and ensure that one persons bio doesn't continue on the page with
anothers.
Here's the code I have so far for the cfdocument:

Put the query around just the body of your cfdocument not
around the whole cfdocument tag. Also, move any query information
out of the header and put that in the body of the document. Lastly,
put a cfdocumentitem pagebreak after each bio...you will need to
check the recordcount of the query against the row you are on so
that you don't add an empty page break at the end.

Extracting body with header and trailer multiple times from a multirow file

Hello Everyone,
I am new to OSB and currently working on a project where I need to extract data from a flat file containing multiple rows of body and a single header and trailer in the following fashion:
Original File:
<Header></Header>
<Details></Details>
<Details></Details>
<Trailer></Trailer>
Desired format using OSB:
<Header></Header>
<Details></Details>
<Trailer></Trailer> ... in a single file, multiple times
Please help me in carrying out this functionality. It's really urgent and important.
Thanks,
Saurabh

Some may argue this is not the right forum - database general might have been a little been than downloads - but now the thread is here I'll try an answer.
As I see it It depends on your spooling tool.
Lets assume you are using sqlplus.
I that case the sql prompt command may serve your purpose
Alternatively
select 'header' from dual
union all
select field1||','||field2||','field3 .... /*must single string expression but may concatentate field */ from somtable
union all
select 'trailer' from dual;may suit.
However I fear either I have not understood the question or if I have understood the question that you may have difficulties implementing this.
Edited by: bigdelboy on 19-Apr-2009 14:32

I need help uninstalling keynote and then installing keynote from dvd

Hi Please help-
I moved the iwork to the trash emptied it out, ten installed Iwork DVD. It then ask for serial number fr trial version. How do install new iwork without trial popping vback up.
Thanks in advance
J

I don't want to remove all registry files that have to do with java, because I have the normal java sdk which I want to keep. If the ME sdk was not meant for vista 64, the installation program should have caught that and prevented it from installing in the first place. the very least that Java support could do now is provide some instructions for manual removal. Anyway, I'm going to e-mail Java support because I'm getting no answers here. But I've checked other topics and I'm not alone in having this problem, so it would be useful if someone could offer a solution here, too.

Restore and consolidate multiple libraries from DVD

Similar Messages

Maybe you are looking for