Restore appears to load wrong software?

I have been trying to fix the ex/folder issue on my new nano. Followed all suggestions I could find in the Apple support site. After restore successfully completes the software appears to be for a different ipod since it is black and white display. I am using the latest ipod updater to restore and am looking for any suggestions?

What kind of backup did you make?
A JSON backup or an HTML backup?
Restoring a JSON backup will replace all current bookmarks and importing an HTML backup will add the bookmarks to each of the three main (root) bookmarks folders. You can open an HTML file in Firefox via File > Open File to see all the bookmarks in that file.
Make sure that the backup file with the bookmarks has the correct file extension: .html for a HTML backup and .json for a JSON backup. 
You can check that via the right-click context menu of that file and open the Properties. 
If you are not sure about the file type then you can open the file in Firefox via "File > Open File" 
A JSON backup will show as one long text line without line breaks and a HTML backup as a web page with clickable links. 
 
* http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

Similar Messages

HT201412 My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?

My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?

This is an iPad user to user forum, so you are not addressing Apple. Depending on how many user helpers are on-line, it may take several hours, or longer, to get a response.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

I have Adobe Reader X loaded on my computer. Adobe sends me automatic updates periodically. I have been told that some hackers have been sending what appears to be an Adobe update and when I select run it will load malicious software or spyware onto my

I have Adobe Reader X loaded on my computer. Adobe sends me automatic updates periodically. I have been told that some hackers have been sending what appears to be an Adobe update and when I select run it will load malicious software or spyware onto my computer. How would I recognize this attempt and how can I prevent it? I also have Norton protection loaded on my computer (via Comcast). I am not sure if Norton can protect me if I select run. Do you have any suggestions?

Hi peterc,
By default, Reader updates occur automatically via the Reader app itself, and this is the most secure way to receive updates. While you can choose to update manually (by choosing Help > Check for Updates), you may not always get critical updates as they're released. See Automatic updates | Acrobat, Reader. If you receive an email about needing to update Reader, you should ignore it, as that is where the malicious updates can come from. Just make sure you're letting the updates happen from within Reader, either automatically or manually.
Best,
Sara

When I try to load Indesign, an error message appears: "the exploitation system you are using is no longer taking responsibility with Indesign". What can I do to load the software?

When I try to load Indesign, an error message appears: "the exploitation system you are using is no longer taking responsibility with Indesign". What can I do to load the software?

Do you have a license for InDesign?

HT1766 I loaded the software fix for face time and it wiped out my contacts and photos. can I restore them?

I loaded the software fix for face time and in loading the new software I lost all of my other content (WITHOUT ANY WARNING). This included my contacts, photos, music. The music I can restore and losing the contacts is an inconvenience, but losing the photos is devastating.
Any ideas?

What software fix for FaceTime? What software did you apply?
Did you backup your iPhone before you updated it with whatever update you applied as described in HT1766? If so, did you backup to iCloud or iTunes? Either way your data should be restorable from that backup.

HT201412 Perfectly fine working iPad and I attempted to load the software update provided for settings. Now, all I get is a black screen with an, on again, off again apple. Restore? iTunes doesn't even recognize the device. Force quit does nothing. Now wh

Hello,
Perfectly fine working iPad and I attempted to load the software update provided for settings. Now all I get is an on again off again apple. Attempted hard reset to no avail. iTunes no longer recognizes the device. So......? what? how? where?
Thanks, Richard

And one more point, I am not an Apple user. This is my first experience and have had to learn as I go. So any explanations please break it down for a noob. I am fairly computer geeky but when it comes to Mac or Apple or iAnything... I have zero experience.

I bought the company unlocked phone from apple store Canada. It was originally loaded with software 4.2 and was working fine here in SaudiArabia. Yesterday I updated with IOS 5.0.1. Now it is showing that sim is not valid. The same sim works in other p

I bought the company unlocked phone from apple store Canada. It was originally loaded with software 4.2 and was working fine here in SaudiArabia. Yesterday I updated with IOS 5.0.1. Now it is showing that sim is not valid. The same sim works fine in other phones.

Here's and update on my problems and here are are some screen shots of the types of problems I've been having since the v5.0.1 update. Keep in mind these are native apps and I have tried the rebuild phone crap many times, nothing helps.
This is screen shot of a what happened when I tried to use my camera one day, both the front and back cameras were all black. I had to power cycle the phone to get rid of this problem. The cameras appeared to be working correctly, I could focus and zoom but it was all black.
Here is an image of what happened when I searched for something in a map. This is after I picked the choice I wanted, the keyboard disappeared but the list didn't. I had to force close the app and restart it for this problem to go away. Who knew five bars on ATT was possible.
And finally this is the messaging app, although you would not know it. I had to return to home screen (after a long pause for it to process the button push) and return to the messaging app. This happens all the time with the messaging app and the notifications sounds drive me crazy. If i'm using the phone, say browsing the web and I get an incoming message its almost 100% of the time the messaging app will screw up. The sound will play at the wrong time or not at all, message will show up in notifications and diasapear in message app or Ill have a problem like this:

Wrong software on ipod

i was updating my ipods software when i noticed ive updated it with the ipod shuffle software and now my ipod third gen. doesnt respond ie. no light, doesnt play music. I was wondering what i can do? thanks in advance

You cannot put the wrong software on an iPod. The iPod updater is intelligent enough to "know" which model iPod is connected, and so installs the appropriate software.
Did you try restoring the iPod?
How to restore the iPod to factory settings.

Unable to restore or update ipod classic software

Running into a couple of problems over the past couple of weeks
1:I can't sync any purchased albums or games to my ipod.Kept getting the error that
I wasn't authorized to play them on this computer.Prior to syncing I always make that authorization is successful.Was told to update or restore my ipod software but when i tried to unknown error 1417 appeared.to resolve this i followed the instructions of article ts1372
2:Now when i try to restore or update my ipod software i get the unknown error 1436
can someone please help me.I'm at my wits end trying to sort this out.Can't find any info on unknown error 1436

forgot to mention I'm using the latest version of itunes (7.7.1)

I have loaded the software for my new printer but am unable to get eprint to work properly. the prin

I have a new HP deskjet 3070A printer which I have loaded the software as per the disc that came with the printer but I am unable to get the printer to print emails
Presumably something is wrong with the ePrint set up.
I operate Windows Vista

Hi there keb71,
Sorry you are having trouble setting up and using ePrint. This link should be able to help you:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02728147&tmp_task=useCategory&cc=us&dlc=en&jump...=
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

My itunes are on windows 97. just got windows 7 laptop. when i load new software on my new laptop it shows all my windows 97 music/audiobooks but can not find the files. how do I link them

my itunes are on windows 97. just got windows 7 laptop. when i load new software on my new laptop it shows all my windows 97 music/audiobooks but can not find the files. how do I link them

iDevices are not and have never been backup devices.
Authorizing a computer does not cause media to magically appear.
Media is only where the user puts it.
Copy the ENTIRE iTunes folder from the old computer to the new computer.

Unable to load 8610 software

Everytime I try to load the software i get a meesage that the software is not available. I have tried to load it from the HP site - but same message, what am I doing wrong or what do i need to do to get the printer set up on my MacBook Pro?

Good day to you @JohnPF and welcome to the HP community
I read your post about the issues you're having with installing the software for your Officejet 8610 on your Mac running 10.7. I have some steps to suggest to you that should help!
In order, try:
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Download and install the Full Driver here: HP Officejet Pro 8610 e-All-in-One Printer series Full Feature Software and Drivers
I really hope this works, please let me know the outcome!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Unable to load Device Software to BB Torch 9800

Hi,
I'm unable to load Device Software to my phone. Have tried with various Bundle from Various Carriers, still there seems to be no luck at all. Its basically dead now with no OS on it. I've tried with various Version of DM and DS, still nothing seems to be working what so ever.
My exact problem is, it's stuck at "Reconnecting to JVM" and that's it, nothing happens after that. There is a continuous blink of red light for seconds and that's it.
I have tried all possible solutions given in this forum, still no avail.
Could someone please help with this as a matter of urgency.
Appreciate your help.
Thanks.

Manual device OS upgrade instructions:
1. First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
2. Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion and unplug BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/
3. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
4. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
5. This step is not needed unless there is an issue on next steps. Use BBSAK from BBSAK.org and wipe the device (after doing a complete backup) then after you get the error 507 (no OS installed) then proceed to step 6
6. remove internet connection to PC and reboot PC.
7. Plug in BlackBerry and double click on "Loader.exe." It's located in the same place as the above vendor.xml file was in.
8. if you did Step 5, restore from back up. Follow this KB if needed http://www.blackberry.com/btsc/KB10339
Enjoy the new OS.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Apps downloaded are appearing as "loading" on ipad 2 and not working

I have downloaded couple of application through iTunes and loaded them to ipad2 64gd wifi 4g. They are appearing as "loading" on ipad 2 and not working. Tried to restore ipad to presious version os and reboot etc. but nothing worked. Can someone help please.

Check iTunes and see if you have a pending or stalled download in there. If you do, finish that download or delete it if you can. If you can't finish or delete the download on the iPad, do it in iTunes on your computer and then sync the iPad. Then go back to the apps and see if they will download.
If that doesn't work or if that was not the problem, go to Settings>Store >Apple ID, tap your ID and sign out. Then reboot the iPad, Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Then go back to Settings>Store>Sign in and sign in again and see if the apps will update.

Reset ipad, now it will not load new software

Reset ipad to factory settings, it now says it's in restore mode, it gets as far as data extraction verifies it with Apple and then will not load the software back on it any suggestions?

Hi seimour,
If you are having issues restoring your iPad, you may find the troubleshooting steps outlined in the following article helpful:
Apple Support: Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Regards,
- Brenden

Restore appears to load wrong software?

Similar Messages

Maybe you are looking for