Restore Audio After "Send To Soundtrack"

I cut up a video > did a select all > did a Send To Soundtrack> Got to Soundtrack> Realized I didn't want to use ST> deleted the files FCP had created in the Finder> Came back to FCP> Now the audio is gone (and the timeline is referencing the audio that FCP created and I deleted.
How can I restore the audio and still maintain my FCP sequence edits?

You can go to File>Restore project and pick a time before you sent the stuff to ST

Similar Messages

Missing audio when sending to Soundtrack Pro

I have a sequence that I'm sending to Soundtrack Pro. It sends and opens but I notice that there is audio missing from sections where I have .motn elements in my timeline. The audio is there in FCP...
Is there a solution to this?

Turns out the audio needed to be linked to the .motn sequence.

No Video when using the "Send To Soundtrack Pro Audio File" Command

Hello FCP Users,
After reading and rereading the FCP and STP manuals and scouring the boards; I still can not figure out how to view my video clip while I'm editing/sweetening audio in STP. I have even used the DVD tutorial in an attempt to figure it out (all works fine and good with the tutorial example), but I'm stuck here the real world.
I'm thinking their must be some preference setting somewhere in STP that I've missed. Any suggestions would be greatly appreciated!!!
Best regards,
Jeff
From the Manual:
Soundtrack Pro creates a new audio file project (with the file type .stap) for the clip. The clip can contain video and audio or contain only audio.
In the Final Cut Pro Timeline, Control-click the clip, then choose “Send To >
Soundtrack Pro Audio File Project” from the shortcut menu."
Mac Pro, dual core, 3GHz, 8GB Ram Mac OS X (10.4.9)

Rob,
The audio consists of two separate audio tracks A1 is from a lav mic and A2 is from an on-camera mic.
It was captured DV.
If I rt click the video clip in the "video tl" the "Send To Soundtrack Pro Audio File" in the dialog box is grayed out/not available for selection, but the Send To Soundtrack Pro Multitrack Program is available to select.
If I choose to Send To Soundtrack Pro Multitrack Program I get the following an error message: Error sending selection to Soundtrack Pro.
I've tried de-selecting the "linked selection" in the tl and rt click the audio clip in the "audio tl" and that allows me to "Send To Soundtrack Pro Audio File" , but no video in the utility window of STP.
If I select the "linked selection" in the tl and rt click the audio clip in the "audio tl" the "Send To Soundtrack Pro Audio File" in the dialog box is grayed out/not available for selection, but the Send To Soundtrack Pro Multitrack Program is available to select.
If I choose to Send To Soundtrack Pro Multitrack Program I get the following an error message: Error sending selection to Soundtrack Pro.
It looked all so simple in the tutorial. I'm going on five hours of trying to find an answer to this issue any other suggestions before I slit my wrists? Thanks for your input.
Jeff
Mac Pro, dual core, 3GHz, 8GB Ram Mac OS X (10.4.8)

How to restore audio in iOS 8 (beta 5) after requesting mic access?

I posted this question over on StackOverflow before realizing that the AIR team might be working on a fix: http://stackoverflow.com/questions/25168882/air4-how-to-restore-audio-in-ios-8-beta-5-afte r-requesting-mic-access
In a nutshell, requesting microphone input in iOS 8 will terminate all audio if it's done AFTER a sound has already been played, but not if it occurs before (sample code is in SO post).
Apps were tested using an iPad 3 the Flex 4.6.0 SDK with AIR 4.0, and with AIR 14.0 - the same behaviour was exhibited.
This poses serious problems for our apps, which are already released and being updated for iOS 8, so please let me know if this is a known issue, and if not, whether you're able to confirm from your side.
Thanks!

Yes, exactly the same flow on our side - interesting to know that it's FLV as well.
My problem remains, though: in iOS 8, if I play a sound (via MP3, SWF, etc) and then check the mic, all further sound in the application stops indefinitely until I close/reopen the app. Since we need to record audio at various times in the app, this will cause a major problem for our users!
I've added a bug in the hopes that someone can verify the problem: Bug#3801262 - Requesting microphone access in iOS 8 (beta 5) terminates all further audio
Thanks!

Cannot use the Send to Soundtrack Pro Audio File Command

I cannot use the Send to Soundtrack Pro Audio File Command, only the Multitrack and it's starting to really get on my nerves. It is unhiglighted. If I unlink the clip and select only half of the audio, the option re-appears. I have no idea what is wrong.

As an audio file, you can only send one clip at a time. This is a feature, not a bug. See the book for more information.
Russ

Anyone having problem with iphone getting not delivered message after sending picture and it really is getting delivered to recipient.

Anyone having problem with iphone getting a not delivered message after sending pic and it really is getting delivered to recipient.

Same problem here with and I've done everything shy of a total reset which I also find unacceptable. This problem exists on all iMessage platforms (iPhone, iPad, and Mac) so I don't see how restoring my iPhone would help the problem.

After sending a picture or message in "Message", what causes the "send" button to grey out?

After sending a picture or message in "Message", what causes the "send" button to grey out?

Restore your iPad to the factory settings.

Sony DCR SX65 has no audio after import

My iMovie app on my Mac Mini has lately not been loading audio after videos have been imported from my Sony DCR SX65. This is something recent as I have previous videos with sound but now it all my uploads do not have sound.

hey there William & welcome to Discussions.
is the VHS tape old or the MiniDV tape? if VHS, it could be that the signal has just deteriorated over time--it can happen w/ poor storage(heat, laying tapes on flat, not re-wound, etc...) & just age. have you tried not recording to MiniDV & just sending the VHS signals through the Sony w/ out a tape in it? it could be that one or more of you audio cables has gone bad, you may have dirty heads in either the VHS VCR &/or the MiniDV or have audio in problems w/ the Sony &/or audio out problems on the VHS VCR or maybe you have a FW issue on the Sony or w/ your FW cable. if you have access to another cam &/or VCR as well as FW & A-V cables, start swapping/troubleshooting & see if your results improve.
good luck.

Send to Soundtrack Pro Multitrack Project - All I get are empty tracks

I have a sequence in Final Cut Pro that has a collection of clips and sequences inside of it. When I right click the sequence in the browser and select Send To -> Soundtrack Pro Multitrack project, it opens STP as it should. When STP opens, though, I have a correct video track, but all of the audio tracks are completely empty.
Am I doing something wrong here?

select the sequence in the browser and then send to STP
make sure the in & out are set correctly on the timeline

Since 5.1 update, my Apple TV has no audio after waking from sleep mode. I can get audio back if I manually put it to sleep through settings. Help please?

Hello,
Since the 5.1 update, my Apple TV 2 has no audio after it wakes from sleep mode. To get audio back I need to go to settings and manually put it to sleep then wake it up. Once I do this I have audio. I have restarted the Apple TV as well as me modem and router. I have searched the boards and cannot find a solution. Please help.

mrdctaylor wrote:
Since I updated to the latest/greatest version of the software I can no longer put my Apple TV to sleep by holding down the middle button.
Thanks!
Apple have changed this setting with the Apple TV Software Update 5.1:
About Apple TV (2nd and 3rd generation) software updates
Feature
Summary
Shared Photo Streams
Accept invitations for Shared Photo Streams, browse photos and comments, and receive notifications of new content.
AirPlay
Send audio content from Apple TV to AirPlay-enabled speakers and devices (including AirPort Express and other Apple TVs). Also includes the ability to require an onscreen code to use AirPlay with your Apple TV.
iTunes account switching
Save multiple iTunes accounts and switch quickly between them.
Trailers
Search movie trailers. In the United States, see show times for local theaters.
Screen savers
New Cascade, Shrinking Tiles, and Sliding Panels screen savers.
Main menu
Reorder icons on the second page by holding down the select button on the remote.
Subtitles
SDH support for the deaf and hard-of-hearing as well as improvements to viewing and selecting subtitles.
Network configuration
Support for setting up advanced network options using configuration profiles. Seehttp://support.apple.com/kb/HT5437 for more information.
Stability and performance
Includes general performance and stability improvements.
If you don't like this, you can leave feedback here: Apple Feedback

Send to soundtrack is grayed out

send to soundtrack is grayed out. this happened after a reinstall. any quick work around? any solutions? -cheers

fcp 6.0.2
archive and install of 10.5.1 to 10.5.1.
just found out that compressor won't compress too.
maybe i'll just start over when i get time.

No speaker audio after resume

I have a Gigabyte P35K with a realtek audio codec.
Audio works great out of the box, including the speakers, hdmi, and headphones. However, once I let the laptop suspend I no longer have audio via speakers but it keeps working from all other outputs.
Alsamixer still shows all the controls as it should and I've tried toggling mutes and volume but there is no change. I've also tried reloading Pulseaudio but it makes no change.
Anyone have some ideas?

I could not get any useful specifications on that laptop, meaning what model of Realteks chips your system has, but I assume it is snd-hda-intel compliant, so try using these options in modules configuration according to this (line 891):
options snd-hda-intel power_save=0 power_save_controller=0
Or the other way around, although that may be enabled by default. This driver supports power management out of box. Autoprobe could be detecting wrong model for your hardware though. I would also look into systemds journal, dmesg and other logs that may be relevant for your system just after sending suspend command. Are not using any sound servers (pulseaudio, jack)?
And since only your speakers are not working afterwards, did your also remove/reload pcskpr module after resume? Did you tried suspending and resuming on a live distribution like mint? I am wondering if there is a dedicated module for those speakers and if they are released cleanly or not at all.

Can't export audio from FCP to Soundtrack Pro

I'm running FCP 5.0.2 and have Soundtrack Pro 1.0. I'm trying to export audio tracks from a long FCP project I'm working on to ST Pro to clean them up. As shown in Apple's online demo videos, I want to export an audio track and then remove 'pops' and do noise reduction, etc. In FCP I right click the audio track I want and go down to 'Send To' but the option for "Soundtrack Pro Audio File Project" is grayed out and I can't click it.
If I unlink the tracks and then right click the audio track and 'Send To', the "Soundtrack Pro Audio File Project" isn't grayed out and looks like it would work. But that is only highlighting one audio track, not the other stereo track and not the video track. In the demo video all three were highlighted but when I relink all tracks and try to 'Send To' I get the grayed out "Soundtrack Pro Audio File Project" again.
Is there something I need to do or a step I'm missing.

You might be onto something Randy. I noticed in the Timeline if I tried to send an imported .AIF music clip to 'Soundtrack Pro Audio Project' it would allow it and the option wasn't grayed out. So I looked in my Browser window and checked out the file attributes to every clip which are listed to the right of the names. Sure enough, under the AUDIO column the .AIF music files are listed as '1 Stereo' and the rest of my captured video clips are listed in the AUDIO column as '2 Mono'.
So was there a setting for me to choose during Log and Capture that would have made them '1 Stereo' as opposed to '2 Mono'? Or is this a preference setting somewhere to change that for next time? They were recorded on my camera in stereo I'm pretty sure.
Now in terms of the massive project I've already captured and edited, should I be able to export these mono tracks individualy and fix them as needed? When I click the 'Send to' 'Soundtrack Pro Audio Project File' for these single mono tracks it asks me to 'Save' the file somewhere, is there a proper place to do this or just anywhere on the HD?
Thanks

Operation Not Allowed When Sending to Soundtrack Pro

Hi
I have a problem with FCP. I have a clip named
main service.dv
When i try to Send To > Soundtrack Pro Audio Project, in the Save dialog, i tick Send only referenced media, and latest metadata... but when i hit Save, an "Operation not allowed" dialog appears. The file is saved, and I can open it in Soundtrack Pro, but its not associated back with FCP.
Thanks.
Joe

Joe Coyle wrote:
The footage was already captured before coming to me. I have nearly completed my project, now just needed STP to get rid of an electrical buzz on a clip.
It's still a bad workflow by definition, "operation not allowed" means you canto proceed without some kind of workaround. You do not need STP to remove a simple 60Hz. But you will need advanced audio processing tools to augment the 60Hz removal if the rest fo the track has lots of content in that freq.
bogiesan

I get silent audio after i separate the video and audio

I'm using vintage video that I downloaded from the Internet. in one project I separated the audio and video, ditched the audio, and exported, via share, the visual clips I need for my final video. in a new project, I imported the segments to place over the audio I created with music software. the segments have a silent audio, that is, it has a part that goes on the audio track, but it's silent. it covers my audio and I can't hear it. I don't know why this happens or how to avoid it. help!
Thanks,
Rosateresa

Rosateresa
What version of Premiere Elements are you using and on what computer operating system is it running? Are you working with sources that come with copyright? For now I will assume no copyright protection involved.
I understand what you are doing through the point that you get rid of the original audio of a video file that has audio linked to it.
And, further I understand that you bring just that export video portion into a new project which has your "audio ...created with music software".
But after that I need clarification.
1. I would expect that, in the new project, you import the video to Video 1 to relate to the music that is already on Audio 1 or the Soundtrack.
I lose you when you write
the segments have a silent audio, that is, it has a part that goes on the audio track, but it's silent. it covers my audio and I can't hear it.
2. I am wondering if you are really saying that when you export the video portion of your file, the export has a video and audio component (silent audio component)? If that is the case, in the export settings under the Advanced Button of the export preset selected, place a check mark only next to Export Video. Remove the check mark next to Export Audio.
See example below from Premiere Elements 12 Windows. On the left...Export Settings and the Export Video and Export Audio boxes for check mark as needed. In the example I have a check mark only next to "Export Video".
3. But you can do everything in the same project, I would think. Right click the video with its linked audio, select Delete Audio. And then import your music into
that same project.
ATR

Restore Audio After "Send To Soundtrack"

Similar Messages

Maybe you are looking for