Restore configuration failed to download from SFTP server

Hi
I am trying to restore the fabric configuration and I am unable to connect to sftp server.
I noticed the following error:
Configuration failed for EPG oob due to Not Associated With Management Zone
Any ideas?

Hi Tomas
Thanks for the quick response.
I think it might be useful if I explain what it is that I am trying to achieve. I have a lab with 2 spines/4 leafs/3 apics. I will be starting a series of workshops to educate my team on the glorious world of ACI.
One of my first sessions will be "how to build a fabric". So I am currently in the process of decommissioning the switches and then issuing the "eraseconfig setup".
After erasing the APIC config the team will build the fabric and then upload the backup configuration from my SFTP server.
So the issue is that I am unable to download the backup file via the GUI.
I have just applied the eraseconfig setup command again I can confirm that it does not build an "External Management Network Instance Profile" from default.
I also have noticed that from a default build the Management Zone error appears.
I have configured the profile but the EPG has not "formed"
At the moment I am unable to download the configuration.
Thanks for your help on this
Ben

Similar Messages

After "restore," how do I get the messages "downloaded from the server?"

I restored my entire mail folder, after I accidentally deleted it. It has restored the message headings, but every message (when I click on the heading) gives me a message that says "The message from "name of person" has not been downloaded from the server. You need to take this account online in order to download it." I have no idea what this means, as I am connected to the internet all the time. Can someone help? This is an important file for me.
Sylvia

My Mail program is a .Mac account, so it is an IMAP, I believe.
O.k, this is what happened: In Mail 2.1.3, I tried to rename a file, and it didn't like that and did some funny things, so I deleted what I thought was a duplicate file by the same name. Then everything was gone. I restored it using Backup 3.1.2, but it wouldn't finish restoring to the original places, as it said that the "archive was busy...etc." I then went online to this site: http://support.apple.com/kb/TS1158 and followed the directions for an incremental "restore."The backup was now in a folder on my desktop. The article did not tell me what to do with these restored items after I had them on the desktop so I tried to drag and drop one of the smaller folders into Mail on the Hard Drive, but that didn't work to put them in the mail program on my desktop. I then followed a similar story line (from you, actually) on April 3 in which you gave directions to "Nanbirder." I followed those directions, and then the message headings were imported by Mail, but not the messages, and here we are with this mess.
I hope you can help me with this; it's a nightmare!!

"This message has not been downloaded from the server" - Multiple devices all using Exchange Active Sync

We are having this issue across multiple IOS devices ranging from IOS version 5.x up to the latest 6.1.2. Many (not all) emails sent to the devices are unreadable and simply state: "This message has not been downloaded from the server". Microsoft believes this to be some sort of bug with the IOS devices in the way they are handling the SSL encryption.
Facts:
- Devices are connected to an Exchange 2010 SP1 Rollup 6 via Active Sync (No POP3, IMAP or SMTP)
- issue occurs on multiple IOS devices within the organization ranging from IOS 5.x up to the latest 6.1.2
- Issue occurs on both external cellular data and internal wireless networks
- Not all emails sent to the devices result in the error, but issue does tend to occur more frequently from certain senders/domains
- Using the same user account on an android phone does not result in an issue (even when receiving the exactly same email that has been sent to the IOS devices)
- Closing mail app / rebooting device does not resolve the issue
- Doesn't appear to matter what the mesage format is (can be html, plaintext, etc)
- Spent nearly 7 hours with Microsoft going through the Exchange server configuration and looking for possible causes. None have been found and all testing indicates things are setup correctly.
- This is not a case of Issue 2.3 listed here: http://support.microsoft.com/kb/2563324 (verified by Microsoft Support)
- If we disable SSL on the IOS device and connect via plain HTTP the messages are displayed correctly!
- If we use a different SSL certificate, the issue still occurs - so not a problem with the original cert.
Does anyone have any suggestions on what would cause this? Does the ISO devices have any sort of log that would indicate why it's reporting this error? The current error is pretty unhelpful.

GFI Have a solution for this problem. It is to do with iOS implementation of reading the message headers when SPF compliance modifications are made by GFI.
http://kb.gfi.com/articles/SkyNet_Article/Error-This-message-has-not-been-downlo aded-from-the-server-when-downloading-messages-to-an-iOS-device?retURL=%2Fapex%2 FSupportHome&popup=true

When I ran the bootcamp assistance for software update I get an error that it can't download from the server

Install Mac OS X lion fine without any issue
I'm trying to dual boot Lion and Wind 7 on different HD but when I ran the bootcamp assistance for software update I get an error that it can't download from the server.
I also try without downloading the software and do the installation but it fail. It seem that this bootcamp is giving problem so I revert back to SN leopard and it does the same. Why can't the bootcamp assistance update the software, is it something that I did wrong or my system is not supporting dual booting.
Here is my spec
Apple Mac Pro "Quad Core" 2.66
Identifiers: Mac Pro - MA356LL/A - MacPro1,1* - A1186

MacPro1,1 has EFI32 and does not support Windows 7 very well, can't boot 64-bit, can't use all your RAM.
There have always been trouble and issues, ways around those, but a big PITA too.
Select CD-ROM Boot
Select CD-ROM Boot Error Apple
Nothing to do with Lion actually. Other than downloading drivers from Apple servers has been mostly hit or miss, with miss being 90%.
I have rebuned the DVD (make a new ISO image using Imgburn etc) but now I just install Windows on PC then move the drive to the Mac. A lot easier.
Without 64-bit you can't use more than 1.9GB RAM. And you need Windows 7 Pro to use both processors.

Restored our SSRS 2008 R2 from one server to another; Dates are in UK format and not US

We have restored our SSRS 2008 R2 from one server to another. The original server was in US locale/culture. The new server was in UK locale/culture, when the restore happened. However it should have been in US locale/culture. We have made this change and
new reports work OK.
However existing reports (i.e. saved by a user) are still trying to use the US dates in a UK format and as a result throwing a date cant be below 1753 error.
Has anyone seen this issue before or have any idea what we need to do to fix it?
Thanks
Kimberlad

Hi Kimberlad
Have you checked any changes in the Collation?
Please verify Reporting Server Databases and Server Collation is there any mismatch with your Source Server.
and also please post complete Error message..
Nag Pal MCTS/MCITP (SQL Server 2005/2008) :: Please Mark Answer/vote if it is helpful ::

I updated my iphone 4S with iOS 6.1.3 and now my e-mails say, "This message has not been downloaded from the server". We have an Exchange server at work. ??

I updated my iphone 4S with iOS 6.1.3 and now I cannot retreive or send my e-mails. We have an Exchange server at work. I still receive the e-mails on all my devices just fine and I can see the subject headings & a small portion of the body of the e-mail, but when I open the e-mails there is no body and it reads, "This message has not been downloaded from the server". Very aggrevating and is not helping my business at ALL!! Same has happened with both iPads we own now.

Delete then add back the exchange acct on each device.

Problem with pdf display downloaded from application server

Hi all,
I have a problem with displaying pdf downloaded from application server (saved in BINARY MODE).
I am getting the pdf output of adobe form in FPFORMOUTPUT-PDF as rawstring back to my program and then converting that rawstring into binary form using the function module SCMS_BINARY_TO_STRING.
Now, when I export the data to presentation server directly using cl_gui_frontend_services=>gui_download, the pdf is downloaded properly.
However, when I save the data to application server file by looping at the internal table obtained from SCMS_XSTRING_TO_BINARY and using TRANSFER, and subsequently downloading the file in "unconverted format" from AL11 to my desktop, I am getting a "blank" pdf file (with the same number of pages as the one downloaded using gui_download).
I have tried different encodings during download but in those cases i get corrupted pdf message. only the default option of INTIAL value seems to work.
I am forced to believe that there is a problem in my code which saves the data to app server but I cant find any solution that is logical. Any solution to this would be greatly appreciated.
Regards,
Sasi
Edited by: Sasi Upadrasta on Sep 29, 2010 7:55 PM

used a program to read the file from appl server and then downloading it to desktop.

"This message has not been downloaded from the server"

Hello, Ever since ive had an iPhone and have used Edge to open a resaonably sized email i usually get "This message has not been downloaded from the server". Im sure this has to do with the slow Edge network timing out. How do you correct this if there is no "Download Now" button. The only solution I have found was to force quit the Mail App (Hold Home button for 6 seconds) and go back in and pray that it downloads without timing out.

There was a thread on this yesterday that stated that if there is more message it may take four to five minutes to download the entire message and/or attachments.
One poster even said that it has taken him over 30 minutes in some cases.
I have this same problem on some email and on others the entire email is downloaded, including any attachments. Since there is no communication put out by Apple regarding this anomaly, it is hard to say whether this a an Apple or provider, i.e., Google or Yahoo.

Mail 'not downloaded from the server'

Recently, I have been getting the message
"The message from Xxxxxxx (this is my account name) concerning “Xxxxxxxx (subject of the message)” has not been downloaded from the server. You need to take this account online in order to download it."
This happens whenever I try to open old mesages, sent or received. But usually only happens after the program has been working fine for a few hours!
If I quit Mail and restart it, all is OK for a while. But it usually happens again.
Can anyone offer a solution, please?
Very many thanks!

Mike,
In addition, the followup if you are using Mail 1.3, and the statement that this message is almost certain to be caused by an Overstuffed Mailbox, typically caused by size and large numbers of messages of diverse types is to see:
http://discussions.apple.com/thread.jspa?threadID=121837
and the important link it contains of:
http://docs.info.apple.com/article.html?artnum=25812
There are a few conditions caused by files that might not be needed, if any were leftover from Jaguar's mailbox structure, but somewhat rare. After you read these, let me know what you find, and any questions you may have.
Ernie

A Twist on (this e-mail) has not been downloaded from the server.

So I've read the discussions on the following message in MAIL
The message from [email protected] concerning “Re: blah has not been downloaded from the server. You need to take this account online in order to download it.
But here's my issue - the ONLY e-mails in my POP account that have this message are between myself and one other person. All other e-mails from the same time period, and in fact everything in my POP account is normal except for messages I sent to and received from this person. I don't want to get into the specifics, but I have several good reasons PRIOR to discovering this to believe that my communication with this person was being monitored. If I didn't have these doubts from before as well as the fact that ONLY this correspondence is tainted, I wouldn't be so curious.
Is it possible that this "download from server" message indicates that some other party was reading these messages? I was not in the US during this exchange - but rather in a country which does poke around quite a bit. I don't mean to sound dramatic or paranoid - but it is awfully strange and suspect.
thanks.
(i don't think this is a problem with Tiger or OS X or whatever - as it only applies to this correspondence)

What does "being monitored" mean?
In Mac OS X 10.4 (Tiger), that error message means there is some mismatch between what Envelope Index says there is in a mailbox and what there really is.
The only way I can currently think of those messages being monitored could have a bearing on this is that someone had access to the *.emlx files stored locally on your disk.

How do I open a site in Muse that has already been downloaded from our server to my harddrive.

Ho do I open a site in Muse that has already been downloaded from our server to my hardrive?

Muse can open .muse files only. Sites downloaded to your hardrive as HTML cannot be imported to Muse. Pages need to be designed in Muse in order to be saved as a Muse project that you can always publish to the web.
Thanks,
Vinayak

Authorware Web Player won't download from our server

We have used the same code to download the 2004 web player
successfully from our server since 2005. Recently however, during
the download, the player starts, but it hangs at the point where
the progress bar with the label "Loading Files" displays. This
happens on a client pc that has no Authorware web player files in
Downloaded Program Files, System32\Macromed\Authorwa, and Documents
and Settings...\Authoware Web Player directories. We can download
successfully to the same pc from the Adobe server. I'd appreciate
very much any advice that the experts have.

Any changes to your server? Not that I'd have any particular
solution if
so, but it's something to check into. Windows Server 2003
needs MIME
Types to be added...but missing those results in specific
errors, I
think, not just a freeze at the 'loading files' screen.
Can other machines download from your server ok? Could it be
something
specific to this client machine?
What browser on the client machine? Do any other browsers
work?
This problem has been linked to popup blockers in some
situations. For
some reason, popup blockers can prevent the web player from
showing the
security dialog, which tries to show before any content is
actually
loaded. Try turning off any blockers that may be present or
adding your
server location to the blocker 'allowed' sites.
However, if that was the problem, I'd think it would occur
while loading
the player from both your server *and* Adobe's server.
Erik
bettymcm wrote:
> We have used the same code to download the 2004 web
player successfully from
> our server since 2005. Recently however, during the
download, the player
> starts, but it hangs at the point where the progress bar
with the label
> "Loading Files" displays. This happens on a client pc
that has no Authorware
> web player files in Downloaded Program Files,
System32\Macromed\Authorwa, and
> Documents and Settings...\Authoware Web Player
directories. We can download
> successfully to the same pc from the Adobe server. I'd
appreciate very much
> any advice that the experts have.
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware

Error message: The message from - has not been downloaded from the server.

"The message from Doug Peets <[email protected]> concerning “Fires” has not been downloaded from the server. You need to take this account online in order to download it."
I get this error message several times per day, even on my Sent mail box, and Drafts, which clearly does not need to be downloaded (does it?). It usually happens when I switch mailboxes, from In to Sent, to Drafts and so on.
I have 100 Gigs of hard drive with 90 Gigs free. I have about 6,700 saved incoming e-mails and 4,700 sent e-mails.
TRhis has only started happening in the last couple months. How do i get rid of it? Is it because i have too many saved e-mails?
When I shut down Mail and re-open it, the messages display properly, but this is a nuisance several times per day.
Thanks,
Doug.

Thanks. I moved half of the messages to a new mailbox "old e-mails", then copied that to a new folder on my desk top, which saved it with a .mbox suffix, then emptied the Old e-mails mailbox in Mail. I will repeat this every three months.
So far, so good.
thanks for your help.
Doug Peets

A possible fix to messages not being downloaded from the server?

there is a previous post about this that has been archived with no solution. i googled this problem and found only a bunch of people saying "yeah, i have this problem too". so i'm posting this to see if my theory helps anyone.
the error on my new 3g iphone read "the message has now been downloaded from the server" after i set my exchange account to push emails to my phone. so i checked my calendar to see if that synced up. i noticed that my date was all wrong. so i went in to general settings and fixed the date. once i did that i was able to read all my emails from my phone.
to test that i set the date to be a year from now and i got the same error. i changed the date back to the correct day, restarted my phone and i could download all my messages once again.
my theory is that typically servers do not like a dissonance like that between it and the device it syncs to. could anyone out there with the same issue confirm or deny this possible fix?

there is a previous post about this that has been archived with no solution. i googled this problem and found only a bunch of people saying "yeah, i have this problem too". so i'm posting this to see if my theory helps anyone.
the error on my new 3g iphone read "the message has now been downloaded from the server" after i set my exchange account to push emails to my phone. so i checked my calendar to see if that synced up. i noticed that my date was all wrong. so i went in to general settings and fixed the date. once i did that i was able to read all my emails from my phone.
to test that i set the date to be a year from now and i got the same error. i changed the date back to the correct day, restarted my phone and i could download all my messages once again.
my theory is that typically servers do not like a dissonance like that between it and the device it syncs to. could anyone out there with the same issue confirm or deny this possible fix?

Why can't I read my emails from my iPad mailbox on my iPad today?Each message is replaced by the comment "This message has not been downloaded from the server."thank you

Why can't I read my emails from my iPad mailbox on my iPad today?Each message is replaced by the comment "This message has not been downloaded from the server."thank you

In which case, clearly communicating the intent would have been a better solution. The steps do apply. A more appropriate response would have been "tried that, no change".
Regardless of whether they fixed the problem or not, they do apply.
If English is not your native language, I would strongly encourage you to post in your native language going forward.
If basic troubleshooting has not resolved the issue, the next step is to take the device to Apple for evaluation.

Restore configuration failed to download from SFTP server

Similar Messages

Maybe you are looking for