Restore Connection Error Message HELP
I'm getting so frustrated right now...not able to do anything cuz my phone keeps giving error message of Radio Off/Restore Connections." I have tried to toggle certain things and take the battery out but nothing. Help me please!
If you go into Manage Connections, if the "Mobile Network" doesn't have a check mark then you can check it to turn the radio on. Or you can choose the Restore Connections or Turn All Connections On option at the top of the list.
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.
Similar Messages
-
I've tried to download the flash player several different times and each time i get a connection error message.It downloads fine and when i run the file to start install, it installs up to 5% and then i get the connection error message. I've tried disabling my antivirus software, closing my browser for install and nothing.Can someone please help me? I'm using Firefox.
Hi!
I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
It allows you to download it offline, which is what I used.
Hope I was help!
-Haroon -
Face time will not connect error message "Please check network conections and Try again" message appears but I'm connected to the internet?
Hey sergioo9,
Thanks for the question. Based on what you stated, it seems like you are having trouble signing into Messages on OSX. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
FaceTime, Game Center, Messages: Troubleshooting sign in issues - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario -
Why do I get "CONNECTION ERROR" message on my N8 ?...
Dear Friends,
I have been using my N8 for one year.
I have not faced any problem so far except this one.
For the last couple of days,
Whenever I start to speak on the phone , in a few seconds time, call ends and I get same message.
"CONNECTION ERROR"
I try to call again.
A few seconds after connection establishes and speak starts, N8 give me same message again.
"CONNECTION ERROR"
It is not possible to speak with my N8.
I removed SIM card from N8 to my old phone.
It works properly.
WHAT MAY BE THE REASON of "CONNECTION ERROR" message from my N8 ??
Any help is highly appreciated.....
Regards@santo98rini
Sounds like an issue with proximity sensor, you haven't replaced screen protector or added new one?
Happy to have helped forum with a Support Ratio = 42.5 -
When I attempt to export/import via FTP for OOTP 11 I get a connectivity error message
I participate in OOTP ver 11 fantasy baseball leagues which uses FTP to export and import league databases. For some reason, I have been unable to import/export using FTP. Each time I attempt to export/import I get a connectivity error message stating "am unable to connect". I have not had this problem with the previous versions of OOTP Fantasy Baseball. Plus, when I first upgraded to OOTP 11, I did not have this problem.
== This happened ==
Every time Firefox opened
== I think it started after a firefox update ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; MS-RTC LM 8; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox -
When i try to download apps from the app store it gives me an error message help!!
when i try to download apps from the app store it gives me an error message help!!
Well this is my first time using the support community so I didn't know how it worked. It was giving me the error message 1004. I figured it out though thanks.
-
Why does not connect properly macpro my motorola bluetooth headphones S10? I get a connection error message and there is no sound. (I want to use headphones to listen to music via bluetooth from my macpro)
the s10 works perfectly on my ipod touch 4g.this is
ERROR HAS OCCURRED Bluetooth audio.
It failed to establish connection with their
audio device. make sure it is on and
in the range. you may need to restart the
audio section of the program you were using
STOP USING THE HEADSET WITH MICROPHONE.
ALSO HAVE A MOTOROLA BLUETOOTH SPEAKERS WHICH EQ5 work seamlessly with the Mac -
I can log into my iCloud account on my iphone but when I try to log in on my pc I keep getting a connection error message. Any ideas?
Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?
-
Error messages help need asap!!!!
hi this is my code and I need help with what i need to do and how to do it to get rid of the error messages
CREATE OR REPLACE FUNCTION
no_of_task_types (x NUMBER)
RETURN NUMBER IS
my_val NUMBER;
BEGIN
SELECT COUNT(distinct t.task_type_no)
INTO my_val
FROM employee e, assignment a, task t
WHERE e.employee_id = x
AND e.employee_no = a.employee_no
AND t.task_id = a.task_id
RETURN tasktotal;
END;
SHOW ERRORS
these are the error messages:
Warning: Function created with compilation errors.
Errors for FUNCTION NO_OF_TASK_TYPES:
8/1 PL/SQL: SQL Statement ignored
13/27 PL/SQL: ORA-00933: SQL command not properly endedHi,
Welcome to the forum!
Don't say things like "urgent" or "asap" (as in your title, "error messages help need asap!!!!"). It's rude.
971848 wrote:
hi this is my code and I need help with what i need to do and how to do it to get rid of the error messages
CREATE OR REPLACE FUNCTION
no_of_task_types (x NUMBER)
RETURN NUMBER IS
my_val NUMBER;
BEGIN
SELECT COUNT(distinct t.task_type_no)
INTO my_val
FROM employee e, assignment a, task t
WHERE e.employee_id = x
AND e.employee_no = a.employee_no
AND t.task_id = a.task_id
RETURN tasktotal;
END;
SHOW ERRORS
these are the error messages:
Warning: Function created with compilation errors.
Errors for FUNCTION NO_OF_TASK_TYPES:
8/1 PL/SQL: SQL Statement ignored
13/27 PL/SQL: ORA-00933: SQL command not properly endedIt looks like you're missing a semicolon at the end of line 13; that's why the statement beginning at line 8 can't be understood.
Also, you store a number in my_val, but never use that number, and you have a variable called tasktotal that's never defined. Should my_val and tasktotal be the same variable?
Perhaps this is what you want:
CREATE OR REPLACE FUNCTION
no_of_task_types (x NUMBER)
RETURN NUMBER IS
tasktotal NUMBER;
BEGIN
SELECT COUNT(distinct t.task_type_no)
INTO tasktotal
FROM employee e, assignment a, task t
WHERE e.employee_id = x
AND e.employee_no = a.employee_no
AND t.task_id = a.task_id; -- ; at end is important
RETURN tasktotal;
END;
/This question doesn't have anything to do with SQL*Plus, so maybe the SQL*Plus forum isn't the best place for it. This is strictly a PL/SQL problem; in the future, post questions like this in the PL/SQL. The FAQ page for that forum, {message:id=9360002} , can really help you. -
HT204053 I am unable to login to iCloud on my PC laptop. I receive a connection error message.
I m unable to login to iCoud from my PC laptop. I receive a connection error message>
The inability to log into iCloud.com (sporadic problem), use Contacts, Calendar, Notes, etc. (consistent problem), send error reports (consistent problem) from a PC seems to be a common problem; perhaps going back to November/December of last year.
I can only respond based on my findings with Windows 7 (Home Premium and Pro) running on three Dell PCs (2 Desktops and 1 Laptop). It appears that the problem results from an add-on to the 32-bit version of IE9 (Windows default browser). The 64-bit version of IE9, since Windows 7 does not allow it to be the default browser, doesn’t seem to be affected by the problematic add-on and seems to work flawlessly when accessing iCloud.com. It appears that most add-on’s aren’t designed to integrate with the 64-bit version of IE9, only the commonly used 32-bit version.
In my case Norton Internet Security (Browser Protection) was the add-on preventing the 32-bit version of IE9 from working with iCloud.com. Temporarily disabling NIS’s Browser Protection allowed the 32-bit version of IE9 to work fine. Perhaps the browser protection add-on in other security software packages causes the same type problem.
The workaround that I would recommend is downloading and using Apple’s Safari version 5.1.7. to access iCloud.com. It consistently works!!!! To make things easier with Safari, I made iCloud.com its Homepage. I’m using it to access iCloud.com from all of my PCs.
Until Apple, Microsoft, or Norton (in my case) figure out where the problem is, you'll need a workaround to consistently access and use iCloud.com and I think Safari is the best answer. -
i wana restore my iphone 3g but when i restore it with itunes after some time is say '' iphone could not restored unknow error 1015 '' help me please
99% because your iPhone was hacked/jailbroken. We cannot help you, see terms of use.
Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state. -
Connection Timeout error message - HELP!
Hi,
I am so fed up with my internet connection....so here is my story....
I live above a shop in a rented flat which is owned by the shop owner, he kindly gave me the password for his router so I could use his internet free of charge.
This has worked fine with 3 different connections he has had since I have lived there and was working with the current one up until about a week ago.....it all of a sudden went off, however it was still showing up as an available network in my networks list, but when I try to connect to it using the password it brings up the 'connection timeout' error message.
I thought that this was something to do with his router so I brought my friends 3 Huawei E585 wireless internet device round to try that, but the same message appears, HOWEVER my iPhone 4 connects to this perfectly fine with a full signal strength.
THEN....my Dad took my Macbook and the 3 Huawei E585 device over to his house and my Macbook connected to it straight away??? ....... is there anything in the building that could affect the connection?? - as it seems to be my flat for some reason all of a sudden!? ..... my Dad has suggested it may be some sort of electrical interference if anything new has been installed recently?
Any help would be GREATLY appreciated as I'm SOOOOOO fed up of not having internet!!
ThanksJohn,
I had the same problem when I upgraded from Tiger to Leopard in January. My memory is already rusty but try the following:
1. Go to System Preferences > Network pane. On the left pane, click on AirPort. In the right pane lower right, click Advanced button. Then on the AirPort tab, click on the name of your network and then the minus sign to remove it from the list.
2. Click Apply and quit System Preferences.
3. Put the computer to sleep.
4. Wake the computer.
5. Go back in to Network preferences, AirPort tab. Click the plus sign to add your network. Fill in the Network Name, choose the type of Security by clicking on the pop-down bar, enter password/code/phrase and click Add. NOTE: Do not connect to the network at this time.
6. Click Apply and Quit the Network Preferences.
7. On the Menu row, click the Airport icon and select your network. (IF your network does not show, choose Join Other Network. Fill in the Network Name, choose the type of Security by clicking on the pop-down bar, enter password/code/phrase and click Join.)
8. Verify connectivity
9. Put the computer to sleep.
10. Wake the computer.
11. Verify connectivity
HTH -
"Cannot Restore Files" error message while attempting to restore entire HD
I have searched this forum and can't find any help on this particular problem. I tried to uses a program (FileVault) to protect some very large directories. It really scrambled all my files so I decided to "simply" do a full restore from my Time Machine. Normally it is connected wirelessly to my iMac, but I physically moved the Time Capsule down to next to the iMac and connected them via Ethernet cable. I wanted a clean HD so I also did a reinstall of Leopard from the installation disc asking it to NOT archive but wipe the disk clean (I forget exactly what the technical phrase for this is)
I then booted the computer off the Leopard Installation DVD and then went to "restore system" and selected the Time Machine.
It had NO problem finding the Time Machine. It gave me all the previous backup points in time---I selected one about 24 hours before I ran into problem.
It started restoring with no problem other than it was predicting about 80 hours to do the whole restore (have 900Gb on the HD so this didn't seem too unusual).
After about 2% of the restoration was indicated on the progress bar, suddenly the restore stopped and I got an error message that it could "Not restore files" and to "Restart the computer and try again"
OUCH! At least it didn't wait til 99% of the restoration was done and THEN crash!
Would anyone have any ideas?
One thought I had--I had updated the operating system whenever an update came out but since I did a re-install before going to the restore option my iMac is now running 10.5, whereas Time Machine has a 10.5.3 (or whatever) version on it. Should I update the OS on the iMac first?
THANKS!
JimThis has solved loads of people who have this issue and have used an alternate DNS setting. Below are instructions for both iPhone OTA and on you Mac
If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
Change DNS Servers
Settings -> Wi-Fi
Click the blue arrow on your connected network
Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
Try again
If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
If you are getting the error message "Unable to check for update" when you try through iTunes
On your Mac
Choose Apple menu > System Preferences, and then click Network.
Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
You can use OpenDNS
208.67.222.222
208.67.220.220
or
You can Google Public DNS if you want
8.8.8.8
8.8.4.4
I have actually repointed my routers DNS so all my devices now point to OpenDNS servers -
IPod Connection Error -- Please Help
Hey there -- I'd love it if a Mac genius could help me out with this. I recently gave my 4G iPod to my roommate when I got a 5G. I tried to connect it to his iBook and it stopped updating after about 70 songs. I reset the iPod's software to factory settings and it still happens.
He's got an 833MHz G3 iBook, and I'm connecting a 4G iPod that's never given me any problems.
iTunes tries to update for a while, then gives me a message that the copying failed and that the iPod cannot be read from or written to. But it did copy a few songs before failing, so it's not like nothing was copied.
Any suggestions appreciated.Does the iPod mount? Make sure it is in disk mode
from iTunes prefs. Open disk utility and you can try
erasing and reformatting if your iPod is visible as
one of the HDs.
After you reformat with Mac OS Extended (journalled).
Try running the updater and restore again.
Is there a good charge on the iPod?
I just did that and I thought it worked, but then I got the same error.
I used Disk Utility to reformat into Mac OS Extended (journalled) and then I used the iPod Updater to restore to factory settings. When I plugged in my iPod, it transferred about 300 songs, then stopped with that same error message.
Yes, the iPod is fully charged.
Wow, what else can I try at this point? -
After upgrade swt from 3.01 to 6.01 at the end of restore backup , error message
hi to all , yesterday i made upgrade my iphone 3Gs from fw 3.01 to 6.01 , with before backup in itune at the end of upgrade and at the end of restore backup in itune , i have message error message because iphone is not connected (but is not true) , and after synchronization of iphone i have contact and notes , but i have not photo , sms , email and configurations account mail , can you please what's is the problem and if i can restore only photos or sms , i've looked in folder library>mobilesync>backup , and i have many files .mdinfo and .mddata , can I restore from its the photos and others ?
sorry for my english , regards to all , Mr. Carlo from VeniceJohnny,
>> Interesting, any specific functionality you know that uses the text or xdb?
Indexing of online help in the application development environment requires Oracle Text. Anything that uses XML (translation XLIFFs, XML data import, Web services, probably others) uses XDB.
>> so if I wanna redo the step in my test enviroment , do I just drop the new 3010000 user and retry the installation? (after installing text and xdb).
Documented here:
http://download.oracle.com/docs/cd/E10513_01/doc/install.310/e10496/trouble.htm#BABDJIFE
Keep in mind - you may not need to nuke your APEX 3.1 installation. It may be as simple as installing these missing dependent components.
Joel
Maybe you are looking for
-
How to share the music folder with multiple libraries efficiently?
Hi, Me and my husband use the same computer, but have our own seperate user account on it. We have setup iTunes such that for each user account iTunes points to the same central music folder (on a seperate large disc). So effectively we are sharing t
-
What is the best way to set up iTunes to deal with a massive media library?
I have a really big media library...probably 7k-10k digital photos, close to 1,000 ripped CDs, and over 600 ripped DVDs, all stored on 1.5TB external hard disks in a 4-drive enclosure. Due to a recent technical glitch, I find myself installing a new
-
Auto project triggering when multiple FG line item's in sales order
Dear Friends, I am working on engineering project scenario mainly all are the Customer projects. Basically my client executes Customer projects for Establishing Dairy Plant, Pharma Plant, and Chemical Plant. For that they manufacture various FG assem
-
Cannot install Windows 8.1 via bootcamp. (Solved)
I have tried installing via bootcamp and I got an error, I didn't take a picture but it said something about not setting the right boot up? I also tried the method of removing the partion and creating a new partion called BOOTCAMP in exFat. I cannot
-
How to compare Date in the TextField or DateTime with Date/Time field?
Hi All, I am facing an issue with respect Date comparinson. I tried to look into entire discussions but failed to get the answer. My issue is: I wanted to comparet Date/time field value with Date value which is in TextField. The functionality of my f