Restore/Copy Time Capsule Backup to External Drive

My daughter is in college, and her hard drive crashed. She's only been gone a couple of weeks, and I have her latest Time Machine backup on my Time Capsule. I'd like to copy that backup to an external drive to send to her so she can restore to her new HD. An Apple Store Genius told me that it can be done with Migration Assistant, but I can't figure out how. Any suggestions badly needed and much appreciated!

cookmj wrote:
my question, can the time capsule be included in the backup of the mac mini to the external drive ?
no. @ least not with TM. see _*Time Machine 101*_ and http://discussions.apple.com/thread.jspa?threadID=1964018#2.
however, there are options:
Carbon Copy Cloner
SuperDuper
ChronoSync
JGG

Similar Messages

Attempting to use Migration Assistant to restore a Time Capsule backup to a mounted partitioned drive?

Had a power surge and my Mac Pro did not fare well. Was able to boot from one of the drives in read only mode, so I did a Time Capsule backup of everything on the drive. Reinstalled Mountain Lion. Booted the computer up and am trying to use Migration Assistant to take the Time Capsule backup and restore it to the 1TB drive. When I use Migration Assistant, it says that there is not enough space on the drive to do the restore. I looked in Disk Utility and saw that the start up disk is another one of the 1TB drives with about 600GB used, therefore not enough space to do the restore. I want to restore to the original drive, but it says it is a "Mounted Partitioned Drive". Can I use Migration Assistant to restore a Time Capsule backup to this mounted partitioned drive?
Thanks in advance for any help - greatly appreciated.

I am not sure, never had to go there, I have multiple bootable clones of the system online and off, and a couple 1500VA/900W UPS units powering everything.
http://support.apple.com/kb/HT1427
http://www.recovermymac.co.uk/data-recovery/time-capsule-data-recovery/
This is a great article:
http://pondini.org/OSX/SetupLion.html
Most questions about TimeCapsule and TimeMachine are under Mac OS X forum as in -
https://discussions.apple.com/community/mac_os/os_x_mountain_lion#/?tagSet=1468

Problems with Full restore using Time Capsule backup???

For some reason my MacBook Pro recently crapped out completely, and I am trying to do a complete restore of the OS via a full backup I made with using Time Machine onto my Time Capsule disk, but I am running into some problems doing so and I was hoping someone might have some insight as to how I should deal with things at this point...
Here's where things get messy...
- I insert my Mac OS X 10.5 Installation DVD into my Macbook and boot from the drive, and I immediately choose the menu option to 'Restore from Time Capsule Backup'...
- After logging into my Time Capsule and then choosing the proper .sparseimage file to restore from, I click 'continue' and it brings me to the screen where I choose where I want to restore to (which in my case, is the one and only internal HD inside my Macbook Pro)
- The bottom of this window tells me that it's "Calculating space required to restore data..." but it simply hangs at the point with a spinning wheel indicating its still doing the calculating, but never actually presents me with the space required, not does it allow me to click continue to perform the restore?? I've allowed it over an hour to calculate the space required and it still just spins its status wheel...
This is where I am stuck at this point, and I have no idea how to get it to proceed to the next step to allow me to perform the restore??
Any suggestions would be greatly appreciated, as I will have no choice but to do a complete reinstall (including all apps and data) if I can't get the backup restored... Thanks!

I had the same problem when installing a new HDD in my Macbook. The solution I found was to reinstall Leopard onto the new HDD from the install CD, then reboot off the install CD once I had done this. I was then able to choose the 'Restore from Time Capsule' option and get my HDD to show up in the window.
A word of warning, once you have reinstalled Leopard and it starts asking you for all you info, as if for the first time to set up your computer, there is an option at the end of that process to restore your data from a Time Capsule backup. While this did restore all my files and so forth, it did not update any of the 'Apple' apps, i.e. iTunes, iPhoto, Quicktime, or the operating system itself, suggesting a 500Mb download via 'Software Update' to update the system. It was faster for me to reboot of the install CD and restore via the process outlines above. That way you get all your system updates included.
Not sure if this is the 'approved' method but it worked for me! The restore process took about 75 minutes for about 100Gb of data from my external backup drive connected to my Macbook via a Firewire cable.
Hope this helps!

Using AirPort Time Capsule as an external drive with access to files by guest account

Is it possible to use my AirPort Time Capsule as an external drive with access to files by a guest account?
I would like to store a large number of folders containg photographs on my AirPort Time Capsule and allow anyone with a password to access the photographs - at the time of viewing the Time Capsule would be connected to the internet but I wouldn't want users to actually access anything other than the files on the Time Capsule - is this possible? if so any help in configuring it would be really helpful.

No it is not possible.. Guest is just that.. a guest that is allowed permission to access the internet but none of the local files.
To give a person access to the TC they must have password to access your normal network..
From there it is up to you how you do this.. people cannot actually access files on your computers unless you give them share and password permissions for that.. you can even setup accounts on the TC although I recommend against it.. if you want shared photos anyway. All security on a TC is illusion.. merely pressing the reset and it is all blown away.. so if you are concerned about security don't put stuff on the TC people should not access.. or like your TM backups ensure they are encrypted.
A person can then access you TC and the photos.. but what else on the network??

Trying to restore from time capsule to nes hard drive, keeps looking for disks ! Can you help

ccan't restore from time capsule to new hard drive, after changing to new HD, after calculating required space to restore it keeps looking for disks! Have have put original OS X install disk 1 in it won't Eject , any help

The very best way to do this is with ethernet to the existing router. Put the TC in bridge mode manually.
Then plug it in to existing router.. we recommend LAN router to WAN on the TC but even that is not 100% necessary.
If you want to link by wireless, to a non-apple router that is bad.. recommend strongly against it. Join a wireless network is super slow.
If you have a desktop Mac you can plug it directly into the Mac by ethernet.
But we need to know how the Mac is connected to internet.
I have given some info on one layout here.
https://discussions.apple.com/thread/4817218?tstart=30
If you end up relying on an old TC. And any of the models from Gen1-3.. and increasingly Gen4 have all reached EOL.. they can die suddenly and either take your files with them or be hard to recover. Also a TC is slow cf a USB external drive even, which is more reliable. Considering a 2TB is <$100 I would be careful using an old TC simply because you got it free.

Is their another way like to use my time capsule as an external drive not using time machine?thanks

is their another way like to use my time capsule as an external drive not using time machine?thanks

You do not have to use Time Machine.. but the TC is hardly suitable for a NAS.. it has no means to back itself up and is relatively slow. Still that is up to you..
CCC or Superduper are good backup softwares .. and there are a number of others.

HT201250 How to backup the Time Capsule to an external drive using Time Machine?

Most of my data is on my Time Capsule since the hard drive on my iMac is too small for my music/movies/pictures and also so multiple devices can wirelessly access the data. I want to back up the files from my iMac and the Time Capsule on an external hard drive using the Time Machine. However, it seems that the Time Machine ignores the Time Capsule as a data source. How can I get this to work?

No, I don't believe this solves your problem.
TIme Machine can be used with a Time Capsule as a backup solution from connected macs and their drives but not from network drives, NAS or Time Capsules.
Thus, if you store files for LAN access on a TC internal drive, and want to back them to the USB/external drive attached to that TC, you cannot use Time Machine to do so.
Time Machine has not way of backing up ANY Time Capsule or NAS or WInPC or other networked drive, as far as I can tell. You will have to use some other backup software.
This is exactly what I bought the TC for myself (tried to use the internal drive on the TC as a NAS for my LAN, storing my music and photos and documents and bought a LaCie 2TB USB3 extneral drive to connect to the TC and hoped to be able to use Time Machine to backup the internal drive to the LaCie drive....but this does not work, as TM cannot backup from a network drive or TC device.

How to restore from Time Capsule to bare hard drive

This is more for information, than a question, but I really hope that it helps someone else out facing the same challenge.
Scenario:
1 complete recent backup on Time Capsule
2 failed hard drive on Mac
3 no startup or OS disk
[My teenage daughter was distraught, as her much loved and much abused MacBook Pro died completely on a college tour; quick diagnosis confirmed that the hard drive was completely toast. And with it, she believed, all of her work this summer on her college applications.
That was the bad news. Now for the good news. Unbeknownst to her, I had configured her machine to automatically backup to the Time Capsule on the home network.
Now the problem. We just moved home. No OS disks. No install disks. And I discovered that she hadn't told me that the optical disk drive was also toast. So no way to get a disk in, in any case.
So I have a backup, and a new hard drive to go into the dead Mac, and (fortunately) a good Mac (actually several). But all of the guides assume that you have some way to get the zombie Mac to boot.]
Solution:
1 figure out spec for new hard drive, find one, buy it and install new hard drive in dead Mac (making it a zombie Mac - it moves but it has no real brains) http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf and http://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Mid+2010+Hard+Drive+Repl acement/4305/1
2 mount hard drive as FireWire disk in Target mode by using ⌘T to any good Mac
3 download Carbon Copy Cloner http://www.bombich.com/
4 start the process of cloning, which involves creating a (hidden) Recovery HD partition http://help.bombich.com/kb/advanced-strategies/the-disk-center#recovery_hd
5 do NOT proceed to clone the 'good Mac', ejecting the formerly dead Mac, which was a zombie Mac, and now has a brain again, and shut it down
6 connect the now undead Mac to the Time Capsule
7 boot the now undead Mac, and restore as usual from the Time Capsule http://pondini.org/TM/14.html
[... and thereby obtain many many good father points]

Read Q14-18 in Pondini.. the grand poohbah of Time Machine.
http://pondini.org/TM/FAQ.html

How to restore from Time Machine onto an external drive

Hi all,
I am a backup freak, and I don't feel entirely safe with Time Machine taking care of backing up my system unless I can test every now and then that I would be able to do a full restore. I've had problems in the past with .Mac/MobileMe's Backup.app, which would not be able to restore from an otherwise apparently successful backup, for one reason or another.
So, is there a way to test a full restore from Time Machine onto an external hard drive?
Thanks for your advice

Allamistakeo wrote:
Hi all,
I am a backup freak, and I don't feel entirely safe with Time Machine taking care of backing up my system unless I can test every now and then that I would be able to do a full restore. I've had problems in the past with .Mac/MobileMe's Backup.app, which would not be able to restore from an otherwise apparently successful backup, for one reason or another.
So, is there a way to test a full restore from Time Machine onto an external hard drive?
of course. connect an external, boot from the snow leopard DVD and choose "restore system from backup" from the utilities menu. follow the instructions and choose the external drive as the restore destination. make sure it's properly formatted. it should be formatted mac os extended with GUID partition scheme.
also, you might want to consider doing secondary backups in addition to TM by making a bootable clone on another external drive. use CCCloner or Superduper for such backups.
Thanks for your advice

Can I extend time capsule by adding external drive connected TC via USB?

Hi,
I use my TC drive for backups, i's now full. Can I extend time capsule backup drive by adding external drive connected TC via USB? If yes, how do I his? I have 1TB WD external drive connected via the TC's USB, I can see the WD drive in the finder and the TC set-up...but I don't know where to go from here...
Thanks for your help
Steveru

Welcome to the discussions, Steveru!
I think what you are asking is can you simply continue Time Machine backups by adding the new USB drive, correct? The answer is not exactly. See below for details.
To use the new USB drive for Time Machine backups, you'll need to Open System Preferences (gear icon) on the dock and open Time Machine. Click on Select Disk and click your USB drive to highlight it, then click Use for Backup. Here's the rub....Time Machine will make a new full complete backup of everything on your Mac's hard drive. There's no way to avoid this. After that, it will continue to make scheduled incremental backups just like it did before on the Time Capsule.
If you ever need to go back to your original backups on the Time Capsule, you'll need to right-click the Time Capsule icon on the dock and choose Browse Other Time Machine Disks.
When the USB drive start to fill, you may decide that you no longer need all the old backups on the Time Capsule disk since you should have a good history of backups on the USB drive at that point.
So, you could erase the Time Capsule disk and then start backing up to the Time Capsule disk again. At that time, it will also make a complete backup on the first pass and then normal incremental backups from that point forward. When the TC begins to fill again, then you could erase the older backups on the USB drive and start backups again on that drive. Then switch to the other drive in the future to keep things going indefinitely. If you go with this type of flip flop plan, you should always have a solid history of many months of backups at any given time.
Will a plan like this work? I don't answer a question on the forum unless I've done it myself. This has been working well for me for almost 3 years.
Pondini, the resident expert on Time Machine and Time Capsule affairs, may have some comments on this as well. If you haven't already seen his excellent guide, Using Time Machine with a Time Capsule or +Time Machine FAQ+, these are the best available sources of information on this subject on the Internet.
Or, if you don't want to erase any your backups, you could of course keep adding a new USB drive when the current drive is about to fill.

Problems when Copying Time Machine Backups to another Drive

MacBook Pro Retina 250 GB SSD (mid 2013) and Mavericks:
I had a 1.2 TB TimeMachine Backup on a 2x3 TB RAID1 Thunderbolt Drive and wanted to continue these on a 1x3 TB MyBook (RAID1 appeared to me not very appropriate for TimeMachine Backups as I have always two redundant external archives for all my data, except system, applications and libraries)
i did this 3 months ago, shifting /copying the Backups from a 1 TB Passport Drive to the 2x3 TB RAID1 Duo. I followed strictly the recommended procedures on formatting the new drive. It took many hours, but there was no problem.
Now, shifting from the 2x3 TB RAID1 Duo to a 1x3 TB Drive took again 7-8 hours, but short of completion, copying the Time Machine directory Backups.backupdp to the new drive, the system said that there are files, unable to convert (???). See two of the messages.
The Backup directory on the new disk is some 40 GB smaller than on the original disk – and grayed out, i.e. unable to open.
Again I followed strictly the instructions for formatting the new drive, as I did earlier. The only difference in between the two actions:
a Mavericks update from 10.9.1 to 10.9.2
a pages, numbers and keynote update, which I deleted after a few tries and I reinstalled Pages9 etc. again The simplified apps were useless for me, as too many of the standard features of iWork 9 - an ergonomic, simplier but almost full alternative to MS Office – are missing.
What could be the problem?
Another message, the one about "unable to convert", I missed the screenshot...

Although the documentation says you can copy Time Machine backups in the Finder, it's very slow and sometimes doesn't work at all.
First, open the Time Machine preference pane and click the Options button. You may have to unlock the settings first by clicking the padlock icon in the lower left corner of the window. Authenticate as an administrator.
Delete the volume you're going to copy from the list of backup destinations. Then turn Time Machine OFF.
Launch Disk Utility, open the built-in help, and search for the term "Duplicate." Follow the instructions. All existing data on the destination volume will be erased. That shouldn't be a problem, because you don't want to mix backup and non-backup data on the same drive anyway.
In the TM preference pane, select the new volume as a backup destination.

Copying Time Machine files to external drive for use with PC

Hello! Any help with this would be greatly appreciated.
My MacBook Pro recently died. I have it backed up by Time Machine on an external drive. Now I'd like to copy my files from the backup to another external drive so that I can access them later from a PC computer running Windows (7 or 8). Is that possible? The Time Machine drive, I believe, is formatted specifically for Mac, but the external drive I'm trying to copy to is FAT32. Can I connect both to a friend's Mac, look for the files I need, and then copy them from the backup drive to the other external drive? Will a PC computer be able to read them?
Thanks!

Usually that error indicates a drive malfunction; specifically, the drive is spinning down and not responding to bus signals. Some "Eco" or "green" drives are known for this behavior. The following steps may help:
Select  ▹ System Preferences ▹ Energy Saver ▹ Power Adapter and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive is connected to a hub, connect it to a built-in port on the computer.
If a firmware update is available for the drive, apply it.
Contact the drive manufacturer to see whether there's a firmware setting you can change.
If you installed vendor software for the drive, uninstall it.
If none of the above steps resolves the issue, try another drive.

Macbook air restored from time capsule backup cannot find ms office product key

Had a moisture problem on my Macbook Air. Had to replace with newer pc as could not wait a week for repair. Had been using Time Machine and a Time Capsule hard drive to back up and the final backup was about 5 minutes before the spill.
So, I was able to fully restore the new laptop from Time capsule. Only problem is that I had purchased MS Office and while the programs are restored, when I launch MS Word, it wants the product code. I cannot find my cd and packaging with the product code from my original purchase. Any way to get the code off the Time capsule backup? It must be stored there somewhere but I wonder if it was encrypted and somehow linked to a physical something on the damaged MBAir.
I'm hoping to not have to buy MS Office again.
Thanks for any advice.
JC

Here you go:
http://support.microsoft.com/kb/2279109

Time Machine backup on external drive no longer working after upgrade to Yosemite

Can anyone explain why, after upgrade to Yosemite, Time Machine is no loger working? Backup on external drive stops few seconds after it has started. What can I do?

Welcome to Apple Support Communities
Try running a DVD Lens Cleaner disc through it, a little bit of dust or dirt is all it takes to throw them out and it might just be co-incidental with the upgrade.

Cannot restore from Time Capsule backup wirelessly to Mountain Lion Retina

I just bought a new 15" MacBook Pro Retina Display and a Time Capsule router. The Time Capsule has supposedly backed up my macbook for a few days but when I try a complete restore from the Time Capsule backup wirelessly, it fails. New to Apple but do remember"can't access time capsule" even though network works fine.
Any help appreciated !!!

See p.4 here - http://www.pondini.org/TM/Time_Capsule.html - and see if the Great Pondoni can help.
He's sure helped others in the past...
Clinton

Restore/Copy Time Capsule Backup to External Drive

Similar Messages

Maybe you are looking for