Restore database not working
Hi
i am using oracle9i as database server
using RMAN i am taking full backup on 22-dec-06
after that i am doing lot of r&d in database e.g. drop user with cascade
now i want to restore database using above *.bk file
so i am doing following things
STARTUP MOUNT;
RESTORE DATABASE;
Starting restore at 07-FEB-07
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 02/07/2007 13:35:52
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 24 found to restore
error occurs
please can you help me to find out solution
i want to restore from *.bk files
Chetan
[1] this is command issued
=======================
RMAN>restore database;
out put is
Starting restore at 07-FEB-07
using target database controlfile instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=8 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 02/07/2007 14:06:13
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 24 found to restore
RMAN-06023: no backup or copy of datafile 24 found to restore
RMAN-06023: no backup or copy of datafile 22 found to restore
RMAN-06023: no backup or copy of datafile 21 found to restore
RMAN-06023: no backup or copy of datafile 20 found to restore
RMAN-06023: no backup or copy of datafile 19 found to restore
RMAN-06023: no backup or copy of datafile 18 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 16 found to restore
RMAN-06023: no backup or copy of datafile 15 found to restore
RMAN-06023: no backup or copy of datafile 14 found to restore
RMAN-06023: no backup or copy of datafile 13 found to restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
[2] list backup
==================
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
182 Full 1M DISK 00:00:01 21-DEC-06
BP Key: 182 Status: AVAILABLE Tag:
Piece Name: /usr/oracle9i/product/9.2.0/dbs/c-3244758008-20061221-00
SPFILE Included: Modification time: 11-DEC-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
203 Full 1M DISK 00:00:02 31-JAN-07
BP Key: 203 Status: AVAILABLE Tag:
Piece Name: /usr/oracle9i/product/9.2.0/dbs/c-3244758008-20070131-00
SPFILE Included: Modification time: 31-JAN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
204 Full 1M DISK 00:00:01 31-JAN-07
BP Key: 204 Status: AVAILABLE Tag:
Piece Name: /usr/oracle9i/product/9.2.0/dbs/c-3244758008-20070131-01
SPFILE Included: Modification time: 31-JAN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
205 Full 1M DISK 00:00:02 07-FEB-07
BP Key: 205 Status: AVAILABLE Tag:
Piece Name: /usr/oracle9i/product/9.2.0/dbs/c-3244758008-20070207-00
SPFILE Included: Modification time: 31-JAN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
206 Full 1M DISK 00:00:01 07-FEB-07
BP Key: 206 Status: AVAILABLE Tag:
Piece Name: /usr/oracle9i/product/9.2.0/dbs/c-3244758008-20070207-01
SPFILE Included: Modification time: 31-JAN-07
[3] file name
=========================================
ORACLE9I_20061222_212.bkp
ORACLE9I_20061222_211.bkp
Please help me
Similar Messages
-
DB Restore does not work on MSSMS 2014 under WIndows8.1
When attempting to restore a DB which was backed up on a different machine (same names but SQL EXPRESS 2012) under MS 2014 running on WIndows 8.1 into a SQL Express DB, the following happens:
1. Open Restore task
2. Select Device to get 'Select backup devices"
3. Invoke "Add" and expect to see a browser. Instead, a backup file location is indicated and no browsing is permitted in the "Locate Backup File" Even when the path and file names are just typed in, the Restore will not work.
Any help is appreciated.Hi,
SQL Server does not allow you to restore or attach a database from a higher version of SQL Server to a lower version of SQL Server in your case from SQL 2014 to SQlL 2012, however you can generate script in SQL 2014 and execute it on SQL 2012.
How to migrate a SQL Server database to a lower version
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
Praveen Dsa | MCITP - Database Administrator 2008 |
My Blog | My Page -
Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, write me of bookmarks could not be loaded. Please advice on everything because I came and they seriously need it.
Did your computer crash or did Firefox crash causing the loss of the bookmarks?
You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
See also:
*http://kb.mozillazine.org/Lost_bookmarks
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes -
Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!
-
itunes restore did not work what do i do now
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
The copy above was copied from this website.
http://support.apple.com/kb/TS3694#error14 -
What if you have a situation where Restore did not work. I do. The ipad mini says it is disabled, connect to itunes. When connected, it says that it is locked! I have tried using Recovery/Restore but after it completed, the ipad mini still malfunctions. It does not allow you to start the device. The slide image keeps dancing around the screen. The opening page keeps changing in size and the keyboard types on its own! What can be done to fix this????????
Maybe a reset would help, to be followed by trying the recovery again.
To reset, hold the on/off and home buttons together for about 10 seconds till the Apple logo appears. Then do the recovery.
If this doesn't solve it, I recommend visiting an Authorized Apple Service Center. -
System restore is not working for my Itouch. I am getting a picture of a white cord and and arrow pointing to Itunes logo... any suggestions?
It sounds like there is definitely a system problem. The whole OS seems to be messed up.
Do you have an MS Windows 7 disk?
In such case you could start the Windows 7 Startup Repair process using the MS Win 7 disk.
Boot from Win 7 disk, after the temporal files has been load, you should get and window where you could choose between the OS installation and other options. The second option called Repair you Computer is the one which would be needed to get the system repaired.
Then wait for System Recovery Options to locate Windows 7 on the HDD.
Then choose the Windows 7 installation and then the next window should appear providing the option to repair the system Startup Repair
But in case this workaround would not help you, the system should be reinstalled once again using Toshiba Recovery disk -
Hello,
I am having a 10g release 1 database on my HP UX server.
The problem with this database is it's listener is working emagent is working fine.
But I am trying to login with system password then it shows me error like
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
HP-UX Error: 2: No such file or directoryModerator Comment:
The O.P. had already asked this question in the Solaris 10 forum.
Database not working
I had already moved it to the Database forum.
Then after the comments in this thread, they've re-posted it yet again into the Database forum.
Not able to connect / as sysdba
and spammed it to the Oracle Linux forum:
Not able to connect / as sysdba
Handle: user8856758
Status Level: Newbie
Registered: Jun 22, 2011
Total Posts: 6
Total Questions: 4 (3 unresolved)@ user8856758 ,
You've been here long enough to know better, so we can only assume you are just being inconsiderate or rude with all your crossposts.
They're all locked. -
I backed up to my PC and attempted restore but I keep getting an error message that "iTunes could not restore the iPhone because not enough free space is available." I have a 32GB iPhone; only 13GB used!!! HELP! iCloud backup/restore did not work either! How can I resolve this problem to restore from back up.
If you're not a developer then you really should not have upgraded.
I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades. -
5.0 database not working in lookout 6.6
5.0 database not working in lookout 6.0. I converted the database using the lks file and then saved it. that all worked fine but my modbus stats are in 100% error connected with direct serial! any known fixes? help please!
Is this MODBUS or the database?
To use the 5.0 Databaes you need to use the NI MAX utility to convert a citadel 4 to Citadel 5 database.
Forshock - Consult.Develop.Solve. -
Hi There. Just updated to 18.0.2 and all my bookmarks (16 years!!!) are gone. Tried restoring but Firefox says it can't read the files.
What to do?
Best / MichaelProblems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to reboot the computer or run Firefox once as Administrator. -
Database not working when network is offline
I have installed Oracle 11gExpressEdition in my office laptop. It works fine if my laptop is connected with my office network and its not working outside office network. I am trying for long time to resolve this issue but couldn't able to find success.
I tried with changing Pcname in "C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN\listener.ora" AND "tnsnames.ora" TO "localhost" and "127.0.0.1".
Installed Windown loopback adapter and reinstalled application. But nothing works.
Can you please help me
Thanks in Advance..Thanks for your replay,
Add to my question, database instance is running and my application can able to connect to database only issue is the link using for management portal
http://127.0.0.1:8080/apex/f?p=4950
is not working showing "Cannot display the webpage".
Here is my listner.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = XE)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
And tnsnames.ora
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO) -
Hi I have created one standby DB for Oracle 10.1.0.2.0 on same server for the primary Db.As per Oracle docs I have configured everything but when I do logswitch on primary DB and then check the standby DB as...
SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME
FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
it shows no records, that means it is not working.
I have created standby redolog file in the primary DB , as I am using LGWR ASYN mode of redo transform but when I do..
SQL> SELECT GROUP#,THREAD#,SEQUENCE#,ARCHIVED,STATUS FROM V$STANDBY_LOG;
GROUP# THREAD# SEQUENCE# ARC STATUS
4 2 0 YES UNASSIGNED
it show the status unaccessed.
please help me to sort out this problem....
RegardsHi
Thanks to all. Yes I checked the alert logs for both DB, there was some problems due to DB_FILE_NAME_CONVERT ini parameter setting. after I fixed that, I am getting this error in lgwr.trc file
Dump file c:\oracle\product\10.1.0\admin\orcl\bdump\orcl_lgwr_1368.trc
Tue Mar 11 15:39:17 2008
ORACLE V10.1.0.2.0 - Production vsnsta=0
vsnsql=13 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows XP Version V5.1 Service Pack 2
CPU : 1 - type 586
Process Affinity: 0x00000000
Memory (A/P) : PH:14M/255M, PG:123M/909M, VA:1749M/2047M
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 5
Windows thread id: 1368, image: ORACLE.EXE (LGWR)
*** SERVICE NAME:() 2008-03-11 15:39:17.008
*** SESSION ID:(167.1) 2008-03-11 15:39:17.008
LGWR: Archivelog for thread 1 sequence 42 will NOT be compressed
*** 2008-03-11 15:39:17.227 47100 kcrr.c
Making upidhs request to NetServer -1 (ocis 0x05FCE6E0)
ERROR: kcrrnsupidhs nsidx=-1
*** 2008-03-11 15:39:17.258 45203 kcrr.c
Initializing NetServer for dest=stby
Initializing PGA storage for Netserver communication
Allocating a brand new NetServer
Allocated NetServer 0
NetServer 0 has been started.
Subscribing to KSR Channel 0
success!
Indicating recv buffer for KSR Channel 0
success
Waiting for Netserver 0 to initialize itself
*** 2008-03-11 15:39:20.415 45488 kcrr.c
Netserver 0 has been initialized
LGWR performing a channel reset to ignore previous responses
LGWR connecting as publisher to KSR Channel 0
LGWR-NS 0 initialized for destination=stby
*** 2008-03-11 15:39:20.415 45982 kcrr.c
Making upiahm request to NetServer 0
Waiting for NetServer 0 to respond to upiahm
*** 2008-03-11 15:39:24.274 47100 kcrr.c
Making upidhs request to NetServer 0 (ocis 0x05FCE6E0)
NetServer pid:2916
*** 2008-03-11 15:39:24.274 47331 kcrr.c
upidhs done status 1031
*** 2008-03-11 15:39:24.274 46176 kcrr.c
upiahm connect done status is 1031
Error 1031 connecting to destination LOG_ARCHIVE_DEST_2 standby host 'stby'
*** 2008-03-11 15:39:24.274 47100 kcrr.c
Making upidhs request to NetServer -1 (ocis 0x05FCE6E0)
ERROR: kcrrnsupidhs nsidx=-1
Error 1031 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'stby'
ORA-01031: insufficient privileges
*** 2008-03-11 15:39:24.336 52124 kcrr.c
LGWR: Error 1031 creating archivelog file 'stby'
*** 2008-03-11 15:39:24.383 50571 kcrr.c
kcrrfail: dest:2 err:1031 force:0 blast:1
*** 2008-03-11 15:39:37.680
Old character set id was US7ASCII
*** 2008-03-11 15:39:38.055
New character set id is WE8MSWIN1252
now how to give privilege to the service 'stby'.
please give me some guidance.
regards -
I'm setting up a new Exchange 2013 org. Everything is pretty fresh, only a few mailboxes have been added for testing.
I've added this permission, to provide full access to all the mailboxes in the database:
Get-MailboxDatabase -identity “Mailbox Database” | Add-ADPermission -user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As
I've verified the permission in ADSI Edit.
I have verified the permission in the recipient's mailbox delegation properties.
However, while logged into OWA using the admin account, if I try to open another user's mailbox from OWA, I just get a sad face that says "Something went wrong :( " .
Any ideas? I've tried resetting the owa virtual directory...reset IIS, rebooted several times, no luck.
ThanksHi
Is that ok when you set to single mailbox?
If ok, please try
Get-Mailbox -database “Mailbox Database” | Add-ADPermission -user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As
Cheers
Zi Feng
TechNet Community Support
Please see the original post, I've already tried "Get-MailboxDatabase -identity “Mailbox Database” | Add-ADPermission
-user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As"
If I add the permission individually through ECP, it works just fine. What I'm trying to accomplish is full mailbox access to all mailboxes in the database now and in the future
(something that works just fine in Exchange 2010,) however in 2013 it is not working. I tried doing it via a security group instead, same result. -
Multiple Image Upload with save to database not working in IE anymore
Since updating IE to SP3 ADDT Multiple Image Upload with save to database does not work anymore in IE. It will show a regular file upload field, an does not allow selection of multiple files. It does work in Firefox, but not all my clients use firefox.
PSE Advice.I would consider buying some pluggins from dmxzone.com. They
may cost a
bit upfront but in the long run, you've probably be saving a
lot of
headaches.
http://www.dmxzone.com/
If time's an issue, with these plugins, you could probably
be up and
running in a half hour. George has some really nice pluggins
for
Dreamweaver and well worth the money.
Peter Raun wrote:
>
I am going crazy here
> I will see if i can explain my problem here. . .
> I am trying to use the multiple image upload with save
to database function in
> the developer toolbox, and it work just fine, it lets me
select where to store
> the filename in database and where i want to save the
actual image on the
> server. It is wery easy to use if you just want these
functions.
> But i would also like to give every image a gallery id
in the database, so i
> can sort them out afterwards, its not whery smart to
upload a lot of images to
> a folder, and in the database you just have an image id
and an filename, i cant
> sort them into galleries with these to collums. . . . So
i guess i have to do
> something with the "additional fields" when i am
creating the server behavior
> but i cant figure out what to do?? i would have liked if
i could have made an
> list/menu with all of the availible galleries, and chose
the one that i whould
> add images too and then that gallery id whould be added
to those images in the
> database.
> I have also tried to pass on an url parameter and then
use that as a default
> value in the "additionel field" section but without any
luck at all. . . I hope
> someone here has an idea, that could help me out. . .
> It is sooooo easy to do this, when you are uploading ONE
image at a time, i
> cant figure out why it has to be sooooo hard when using
"multiple image
> upload"
>
Maybe you are looking for
-
Hi All, When we upload or create contents or post the messages in the discussion. The user name will be recorded. Is there any ways to record and show both name and IP address of user? Thanks, Anucha
-
Looking for bright ideas for moving address book from MacBookPro that can't be upgraded from OS 10.5.8 (big bummer!) to iCloud and iPad2
-
Setting up a uniform workspace background for progs like Photoshop and Word
I am new to the wonderful world of Macs having been dancing with the PC devil for too long. When using Photoshop, in the PC world, when opening any image, the background to the workspace is a uniform grey. On my shiny new Mac, the background to any w
-
Hi Guys, I wanna to create a table, the header is fixed by the date, for example, 20-12-2007, 21-12-2007, 22-12-2007...15-01-2008...,do you guys have any idea for this, or this date need select from database and set in the column header?? Help please
-
TREX: default search language
Hi, When accessing documents in the TREX, the application seems to be defaulting to DE. The documents in the KPRO are indexed under EN. Therefore when I search in the e-recruitment application the search is looking under docs in DE, is there a way I