Restore deleted objects with local transports ?

hi experts,
while trying to delete existing source system and create the same again in RSA1, I deleted some of the BW objects as it was asking to delete. Now I could not activate the bw source system, which I created newly. I have local transport created for the deleted objects. Is it possible to restore the deleted objects back.
Thanks,
Usha

Hi,
Welcome to SDN !!!!!
Is it only single BI system or any other BI system exists. If exists are these deleted objects moved to that other system. If yes then try to create the requests of deleted objects in that system and then transport them here. If it is only a single system then as per my knowledge I dont think it is possible to resote them from local requests. Normally if you have two clients in a system and if you want changes from one client to be copied to other then we do it using SCC1. But I guess you BI system might have only one client and I think transporting them in the same client would not work. But anyhow just give a try by using SCC1 tcode.
In last case check with your BASIS consultant if they are taking backup and till what date backup exists. If backup exists then ask them to restore the same and this will restore the complete system to date of which the backup exists.
Regards,
Sharath

Similar Messages

How to determine deleted objects in a transport

Hi
I create a new report Z_TEST_1 and assign this one to a new transport request.
Now I rename this report to Z_TEST_1B
In my transport are two entries:
-Z_TEST_1
-Z_TEST_2
Now I read this objects with function module TR_READ_COMM
Afterwards I want to analyse the objects of this transport
But how can I see which objects exists and which not?
I only need the (still) existing objects (in my test case: Z_TEST_2)
I don't want to check every single object if this object still exists. I know I could check the entry in table TRDIR (for reports).
But there are a lot more object kinds in my transport (function modules, dictionary objects, forms, table keys)....
Does anyone have a simple solution for this problem?
Thanks
Andy

Hello There.
SE03 is for finding the existing objects according to your first question (for function modules, reports, etc).
As your object is not imported or transported.
You need to find your deleted objects in Transaction SE95.
In the window beneath,
1. Go to window, Reset Objects.
2. Check the deleted objects.
3. You can also mention your request or package.
4. Execute.
5. Go to Deleted objects node.
6. Navigate to the node desired.
7. You can also find the request related to that business object by clicking on find requests.
These are the logs.
If you have already tried out then its good or else give feedback.
Good Luck & Regards.
Harsh Dave

Restore deleted objects

Hi experts!,
I used FM RH_OBJECT_DELETE to delete some objects. Are there any FM for restore objects?
A lot of thanks in advance.
Best regards.
djlu

I don't think it is possible to get back the deleted objects. You need to create them again. You can do it by using the same technical name.
The transport request in which you have these objects collected will be containing the information about the deletion of these objects, So if you move this transport to test environment then these objects will also get deleted from there.

Best way to restore "deleted objects" container's ACLs?

Hi,
I haven noticed, when using the the LDP for reading the security description of "Deleted Objects" container that LDP returns to me "Error: Security: No Such Attribute <16>". Should it be readable or not? At least all other environments
I can read it.
And if it should be readable, then what is the best way to fix it? Take the ownership, and etc... If I take the ownership, then I assume some ACLs are reseted and installations like Exchange and Lync requires domain preparations, right?
Petri

> description of "Deleted Objects" container that LDP returns to me
> "Error: Security: No Such Attribute <16>". Should it be readable or not?
AFAIK, deleted objects lose their ACL.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Dealing with a deleted object in the transport..

hi,
so here is a new scenario !!
I had a transport moved from one sap dev system to another sap dev system, say ECCDK1111. This contained an IDOC with 4 segments. In the new system, I deleted one of these segments, I was asked a transport request for this, I created a new one, say ECCDK1120.
I deleted this transport request ECCDK1120 by mistake !!!
Now when ECCDK1111 will be moved to the quality system, what will happen ??
1. Will any transport error be encountered ? I presume so, because ECCDK1111, has an entry named "Customizing: Table contents" under which EDISDEF, EDISEGMENT and EDSAPPL are listed and these contain an entry of the segment (which was moved from old system but which I deleted in the new system ). Can anyone say for sure what will happen ??
2. In case answer for my first question is "errors will appear", then how to resolve it ??
thanks to all who have been patiently answering my questions 4m yday regarding such scenarios w.r.t transports. You guys are great !!

hi,
in Quality system same thing will happen like by importing into Dev2 sytsem. I.e . IDOC with 4 segments will be cerated. The deletion of one segemnt in Dev2 system does not play any role here, because the transport was created in Dev1 and by release of the transport the actual status of the objects is saved into a transport request, and that request will stay the same forever. Even if you would have deleted the segment in Dev1, the original transport would have remained the same (if it is released already - but that is the case here).
hope this helps
ec

Deleted objects assigned to transport..

hi ,
i created one object, it is assigned to a transport. like a Ztable. Then when i delete it again transport request is being asked !! why ? what does this mean ?
what happens to this transport then ? what shud i do with this ??
thks

Hello,
A delete is a change just like any other change and will be recorded on a change request. If you released the change request on which you created the object then when you delete it you will be prompeted for another change request. If you had not released the initial change request then the delete should be recorded on that change request as well.
What this means is that you probalbly should transport both change requests to their target systems(PRD?) so that the create and delete are both reflected in the target. If the olny two changes on the request(s) are the create and the delete of a single object you could just leave the requests in the original system and delete/archive them
Regards
Greg Kern

How To Restore Deleted Table With It's Data To Specified Time Using 10g

Hello Everybody
I would like to gain from your experience in the Felid of DBA so now i am not trying to restore the full database, but i have a stupid user dropped accedintaly a single table from the database. i want to restore this table after being deleted but also i have big problem i dont have any backup for this table so if you please send to me any solution to restore this deleted table
Notes : I have (Flash backup On , Archive Log Is On)
it is not that the database is corrupted or anything
Ramez S. Swires

Hey N. Gasparotto
Thank you for replying me. in the first thread you told me
( Without any flashback availability, you haven't any other choice than PITR (Point In Time Recovery)).
i already checked i found that flashback is working and archive log are working and both are working normally and working before dropping the table and also i cant restore the table which is dropped.
So what can i do?
Do you have any other idea?
Ramez S. Sawires

ICloud contacts syncing issues - restoring deleted users with other contact name

Hello,
Have you ever had a problem that iCloud restores a contact that is not on your phone anymore… and it restores with someone else name?
Best regards,
Mauro

I'm having the same problem as yours.
I got a few contacts mixed after updating to iOS 8.3.
Please post the solution once you find it.
Tks,
GJ

Deleting objects in transport request

Hello,
I made the changes in InfoCube in developer system and included those changes in a transport request. I didn't release this transport. Then I realized that those changes must be reverted.
I know what I have to do. First of all I need to change manually InfoCube and then remove objects from transport request.
I have doubt about deleting objects. In transport request there is a lot of object which Iu2019ve never changed such as InfoObjects and InfoArea.
Can I safely remove these objects? Why these objects are attached to my transport request?
I checked them and last change was made by another user.
Thank you for your time.

Hi,
I don't think there is any version comparison available with target system like R/3 reports. You will manually have to compare the properties.
If you have lot of objects and do not want to loose any changes then you can even think of reverse transport from production system to development system for selected objects.
Now about locking the remaining objects you can open the TR through SE09 in change mode and then select the required items and from the tool bar you can directly lock all the items in single go.
Regards,
Durgesh.

Restore AD-object on Windows 2008R2 DC with a Windows 2003 functional Level

Hi,
Anyone has experience with this?
We need to know how to restore a single AD-object (eg. a user-object) on a Windows 2003 Functional Level, hosted on Windows 2008 R2
What is the best practice?
Thnx.
Peter

Peter,
Use LDP tool to restore deleted objects in AD.
I suggest you to refer below links to know more.
How to Restore Deleted Active Directory Object using LDP.exe in Windows Server 2008 R2 Domain.
Another Technet link for your reference:
http://technet.microsoft.com/en-us/library/ee617262.aspx
Regards, Ravikumar P

Restore deleted AD User Account in Windows Server 2012

Good day.
I know Windows Server 2012 has an Active Directory Recycle Bin feature, however upon enabling the feature it doesn't display the deleted user account I have deleted prior to enabling the feature. Is this normal? Does the feature only displays deleted AD
objects after you have enabled it? Is there other way to display those objects? Thanks in advance.

Hi James,
Yes, You should have a valid system state back to perform an authoritative restore.
In case you don’t have any system state backup, you can use ADRestore to restore tombstoned objects. When an object is deleted from Active Directory, it isn't actually removed but is instead marked as deleted by an internal marker called
a tombstone.
Note: ADRestore cannot restore the group membership for a user. Meanwhile, not all attribute data can be restored.
http://blogs.technet.com/b/asiasupp/archive/2006/12/14/using-adrestore-tool-to-restore-deleted-objects.aspx
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!
No he can _not_, as there is no tombstones when the recycle-bin is enabled, recycled objects can not be restored/reanimated.
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog

Log for Addition/Deletion of object in a Transport Request

Dear Friends,
Recently I had a issue where I tried deleting an object from a transport request and I got the message that object is deleted successfully.
But when the transport was imported then it failed with Sy-subrc 8 because of the same object in transport. The reason for the same could be :
1.) Either the object was not deleted from the transport request.
2.) Or Some one else added the same object again in the request.
I want to read the log of this transport in such a way that I see when a object has been added/deleted from a transport request along with SAP User ID of the person doing it.
Is this possible ? If so kindly share the steps with me.
Thanks a Lot for your kind help!!! This is very important for me....
Regards,
Lalit

Hello Lalit
I hope nothing of that sort is available as the transport requests will again have tasks under them.
The changes done to the task will have to be tracked in that case but SAP doesn't have that task change logging as far as I know.
All E0* tables relates to transports and objects under these transports none of them have logs on this nor even any transactions which allow user to edit the transport object.
You get an action log which provides who created it and who releaed them.
But if you configure CharM on Solution manager I hope you can track each changes.
Regards
Vivek

Is there a way to create a transport to mass-delete objects from another system?

I am facing a unique issue where I have to generate a transport that will successfully import into an external SAP system and delete over 1,000 objects (reports, data elements, UI elements, transactions, function groups, the whole lot...). All of these objects can be easily looked up because they are in the same namespace.
Essentially, I need to remove all objects with a given namespace via transport.
Is there any way to do this other than manually deleting all of the objects in the source system and adding them tediously to a single workbench request? This would take hours if not days to do manually, especially due to dependency issues.
Thanks for any and all constructive feedback!

Hi,
I did a quick test: created a new package (development class) with one table, one function group using the table in global data definitions containing one function module referring to the table in interface, and one program that's calling the function module and using table in data definitions. Released the transport to Q.
Then, in the second our dev system, I created the same package and TADIRs for the three objects manually (SM30); released transport to Q of that system. Then I manually created transport containing all the three objects, the export log looked like this:
TADIRs in second dev system were gone after export.
Then I added transport to the first development system and imported
- the objects were gone (including their TADIRs) leaving the empty package.
In retrospect, I should have deleted the empty package in second system so it's cleaned up by the same transport.
If you do have access to "clean" system, doing via ABAP the steps I did manually should not be too much of a challenge.
I may have simply gotten lucky and if this works with all objects, for all kinds of dependencies, remains to be seen... though I was until now under impression that import itself doesn't check any dependencies at all... What kind of messages were you getting?
cheers
Janis

Creating transport for PI deleted objects

Hi all,
PI newbie here.
I have deleted an Integration Scenario as it is no longer needed. I can see this in my Change List, along with the CS object from which this has been removed.
How do I get these objects into a transport request?
When I right-click on the CS to activate I get the objects in a Change List and the IS is there but not selected. I assume this is correct and that I smply activate the CS? Please confirm.
PS: once again apologies for newbie question.

Hi Glen,
In transport wizard , check deleted object and your deleted objects will also be available for transport
Note: When you delete any object in ESR / ID , you must activate the change list then only changes will be reflected on PI server / cache
Thanks
Hari.

Transport deleted objects in productive

Hi!
Help, plz.
What is the right way to transport deleted objects (levels, packages...) to PROD system from QUALITY?

Hi Marina,
I would think the right way to transport objects would always be from DEVP (development) to PROD and not from QUALITY else after a period of time it is possible that you might have three systems DEVP, QUALITY and PROD and none of them in sync with each other.
You use QUALITY only for testing/training purposes and not for development purpose.
If you have accidentally deleted objects from Devp, would suggest recreating the same in Devp.
hope it helps

Restore deleted objects with local transports ?

Similar Messages

Maybe you are looking for