Restore DVD failure

I have a problem with restore DVD.
After the system has cancelled existing partition and data, I get an error when getting to 94% progress of file copy.
I tried to make a copy of the DVD but my copy software also found that there was a failure on the DVD.
Is there any chance I could the corrupted files in order that I build a new DVD?
My laptop is SATELLITE PRO A120 PSAC1E-05V02WFR.
Thanks

At first it will be interesting to know one thing: why this problem occurs? Is this really because of recovery DVD or maybe because of defective HDD?
You didnt write what happen exactly after 94%. Is there some error message and which one?
As far as I know the single files cannot be repaired or exchanged.

Similar Messages

How to restore HP factory defaults without system restore Dvds if Win7 is formatted?

I recently encountered a problem with pre-installed win7 in HP Pavilion Dv6 6121se laptop after replacing the old battery. The hard disk had three partitions: C, D & E. By default the windows was installed on C drive. The following operations were performed in sequence:
1-      Using Partition Wizard 7, I decided to format C drive with the idea to re-install the OS from recovery partition. I accidently changed the recovery partition from "Primary" to "Logical" during this process. Soon I learnt that the system recovery (F11) wasn’t functioning followed by this message: No bootable device - - insert boot disk and press any key
2-      I made a system repair disk from another laptop to overcome the above issue. It didn’t work, so I then decided to merge the C, D and E partitions using AOMEI Partition Assistant Professional Edition. The status of the hard is asunder after merger:
Partition            File System Capacity Used Space Free Space Flag Status
C: SYSTEM           NTFS                   199 MB       13.8MB 185.2 Primary                  None
D: Data               NTFS 451 GB           99.8 MB 450.9 GB Primary                 None
E: Recovery NTFS                    14.45 GB      12.87GB 1.58GB Primary               System
F: HP_Tools FAT32                  103MB          15.5MB 87.5MB Primary              System
Here comes the problem:
A)      When C: SYSTEM is set as active partition, I get this message on startup
BOOTMGR is missing
Press Ctrl+Alt+Del to restart
B)       When E: Recovery is set as active partition (or tapping F11), I get this message on startup
    Windows failed to start. A recent hardware or software change might be the cause.
File: \Boot\BCD
Status: 0xc0000098
Info: The windows   boot configuration data file does not contain a valid OS entry.
Please bear in mind that I didn’t make any system restore DVDs in advance which could have been used at this stage but I do have the default recovery partitions intact in hard drive as shown above. After all this, is there any way to retrieve my system to factory settings without losing recovery partition and HP tools?
Thank you all!

Try download a PE system and get in there and run an WIM tool to install windows to C
(Look for base.wim in the recovery partition and install it)
Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
**Click the White thumb if you like the answer.**
**Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

Missing Mac Mini Restore DVD disk 2, need to Cancel Installation

hi, I'm a Mac newbie. I recently bought a mac mini from someone. Unfortunately, I didn't realize at the time that there should be 2 restore dvds instead of just one (I thought the Os X Tiger drop in dvd was the 2nd dvd).
I'm trying to reinstall the OS X along w/the software b/c I ran into some problems with the Mac mini. But when I get to the screen that says, "please insert Disk 2", I have no disk 2. I can't cancel the installation b/c the Cancel button is grayed out. I tried shut down and restart the computer from disc one directly, but after click through a series of Next buttons, it only leads me to the same screen.
Now I can't use my Mac mini at all. Short of fork over $40 for a replacement dvd from Apple, is there anyway I can restore to the previous point prior to my attempted installation/cancel the current installation?
Much thanks in advance.
Mac Mini 1.25 ghz Mac OS X (10.4)

"is there anyway I can restore to the previous point prior to my attempted installation/cancel the current installation?"
No, sorry. That is not a feature of Mac OS.
If you have an Apple retail store nearby head on over there, explain your situation and see if they'd be willing to copy the 2nd disc for you.

Wont boot from restore dvd's or new copy of Leopard!!

Well I am witts end I have an isight that I installed a new hard drive on and will not boot from the restore dvd's, or a new leopard disc(now i am out 130). It will how ever boot from drive genuis(new drive is fine) or restore dvd's from a new iMac and it will tell me that disc's are not compatible(duh just checking to see if it was a bad optical drive) any suggestions or ideas are welcome!!!

"Well I am witts end I have an isight that I installed a new hard drive on"
The iSight models are not user rerpairable except for RAM installations. All other repairs should be done at a repair shop. Apple does not even supply repair manuals (DIY) for the public for the iSight models.
If you installed the HD yourself, its possible it was not installed correctly.
Just a thought..............

Mac mini 2011 a1347 restore DVD

Hi, I have a 2011 Mac mini and where I live now I haven't a good internet access, now I have to do a full restore and it asks me to download it from the internet but that's impossible me to do because 1giga files could take months to download, I also brought long time ago a snow leopard DVD and tried to install on the Mac mini with no luck, it doesn't even boot.
Need to know if you can send me the default restore DVDs for that model of Mac mini, thnxs.

Depends on what is being called a "2011" Mac Mini. If it was purchased before July 20, 2011, or does not have the hardware or firmware revisions of July 20, 2011, then it is not a mid-2011 Mac Mini, and a system specific 10.6 installer disc would be available to it. Otherwise, that's correct, you must have a high speed internet connection somewhere to get the software, if you don't already have it.
As you'll see here:
http://www.everymac.com/ultimate-mac-lookup/?search_keywords=A1347
Refers to 2010,2011, and 2012 Mac Minis. We'll need you to verify your have a Mac Mini 5,1 or later to decide whether or not you need the high speed internet. If you do, according to the System Profiler, then find yourself a place with high speed internet.

Startup problems and no restore DVD

Hi
I purchased a demo G5 iMAC, and after 6 months it fails to boot.
I assume I need to do a rebuild, but the system did not come with any restore DVDs.
I also have a mac mini, but have discovered that its restore DVD doesnt work with the iMAC.
I managed to run first aid from the mac mini disc and it claims the HD is ok
Can someone please tell me where I can get a copy ?
I am not to keen on spending $200 aus for a copy of Tiger - when I should already have a license for Panther
Since the DVDs seem to be only for specific machines, can I download it ?
Is there some way I can use the mac mini software ?
Steve

Welcome to the discussions!
You can also call Apple and they will be able to provide you with the machine specific disks - at a cost of course.
May I ask why you waited six months without the restore disks? This is something that should have come with the computer and if not, you should have been on the phone right away to have them :just in case."
I hope you received a nice discount for them being missing.

Missing SOftware Restore DVD's

Hello.
I have a white MacBook that I bought last year (March 2008), and I lost the restores DVD's that came with the computer.
I read many forum post and it seems there's no way to get those DVD's from Apple (I don't have Apple Care).
My question is:
What's inside those DVD's?
If I buy Mac OS X v10.5.6 Leopard and iLife 09, do I need any additional software that is inside those DVD's?
I have a friend that has the DVD's, is possible to make a backup copy? How can make it?
Thank you.

Even if you don't have AppleCare, you can call up Apple and they'll send you replacement discs for a nominal fee. This is far less expensive than a retail copy of Leopard+iLife.
I believe buying a retail copy of Leopard+iLife would be enough, but I'm not completely certain. I do know that you wouldn't get a copy of the Apple Hardware Test, but I'm not sure what else would be missing.
You can't use a friend's discs as the restore DVD's are machine-specific.
~Lyssa

Where Can I Find The Fonts On My 2 Software Restore DVDs ?

Recently I completely erased my eMac and installed OSX Tiger from a Tiger DVD, which I then updated to OSX 10.4.10.
I was able to retrieve the original eMac applications from the Software Restore DVDs using Software Restore.
However, I have just discovered that the latest OS does not include all the previous fonts. Some of my favourites including Portago and Textile are missing.
I assume that these fonts are somewhere on the original eMac DVDs - but where are they and how do I get at them?
I have Pacifist but am not too sure about its use.
Ian.

Scroll down to the bottom of Kurt Lang's Font Management in Mac OS X Tiger and Panther

How to customize install with the restore DVD's

HI, Is there a way to customize the install of the restore DVD's for Vista.
For example, I wouild like to have 2 partitions. Also, I do not want all the extras installed, mcafee, etc.
Thanks
Solved!
Go to Solution.

Is the restore partition intact on your Thinkpad?
If you run the restore from the restore partition it gives you the chance to do a "Custom Restore" where you can choose to not install some of the programs.
When you run the cd's it wipes all partitions and installs the resore partition. Then it restores windows from the restore partition without the option to do a custom restore. You would have to restore asecond time from the hard drive to get the custom restore.
T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
T400 2765-T7U Windows 7
Registered Linux User #160145
FYI: I am not employed by Lenovo

Restore DVD Question ?

hi all. i recently switched to Mac from a PC by buying a MacBook Pro off of craigslist. Only problem is that the guy i bought it from did not restore my mac to its orignal settings before he sold it to me and now i have all his extra bull on my HD. At the time i bought it, i didnt know i needed the Restore DVDS in order to restore the mac, and now he wont even pick up my calls. I've looked online to find the correct DVDs to use, and i was wondering if yall could tell me if these are the right DVDs that i'll need. Here is my Mac info:
Hardware Overview:
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro2,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP22.00A5.B07
SMC Version: 1.12f5
Serial Number: W86522ZNW0H
Sudden Motion Sensor:
State: Enabled
*and here is the link to the discs that i am considering on buying:*
http://www.ifixit.com/MacBook-Parts/MacBook-Pro-15-Inch-Core-2-Duo-Restore-DVDs/ IF185-065
*anyone know if these are the correct ones? thanks.*

Welcome To  Discussions jmontalbo!
If you can call Apple Customer Service 1-800-767-2775, and provide the serial number and MacBook Pro system specifications, you can order of set of replacement system discs, for an amount, which is probably lower than that quoted price.
And you will know that you have the correct discs.
ali b

Replacing Restore DVDs?

Is there a way to get a replacement copy of the restore DVDs for my computer? I tried booting from the restore DVD, but upon ejecting the disk, I noticed that this disk had gotten badly scratched up from last week (when I went to apple hillsdale, I put the DVD in a Jewel case, but it must have gotten damaged on the way home!)
(P.S.) I have AppleCare extended warranty, and I wonder if this is covered? I will find out at 7:15 am!

I don't think it will be covered under warranty, but if you contact Apple they will provide a set of replacement disks for a nominal charge.

Need to format new HD but lost restore DVDs

I just bought a new MacBook Pro 13" laptop. I also bought a new 500gb WD Scorpio Blue hard drive at the same time. My plan was to swap out the stock 160gb HD, and install the 500gb drive, and then format, install Leopard using the Apple Restore DVD, and then use Migration Assistant to transfer files etc from my old MB.
The problem is my wife threw out the MBP box, which contained the Install/Recovery DVDs. Doh. Now I do have a retail Leopard disc (and retail iLife 09 disc) that I bought to update my old MB a few years back. Can I use the Leopard disk to setup the new HD on the MBP 13"? Will I run into any issues regarding drivers or specific files that are on the factory Restore discs but not on the retail Leopard disc? Am I better off going to the Apple Store and trying to get replacement Install/Restore DVDs?
Thanks

Another option is to purchase an inexpensive external SATA enclosure. You can just put your new drive in the external enclosure and use either SuperDuper (free for full clones) or CarbonCopyCloner (completely free... but accepts donations) to clone your internal drive to your new one in the external enclosure. After you complete the cloning process... restart your machine holding down the "Option" key. This will bring up a screen that will let you select your startup disk. You would then pick your external drive (you need to actually press the mouse button here... if you have "tap to click" enabled, it won't work at this point). This will launch your OS from your external drive. Note it will be a bit slower as the USB/Firewire bus is somewhat slower than your internal SATA bus. Try it out a bit to make sure everything is working okay. Then you can just swap the drives... putting your old one in the external enclosure as a backup. NOTE: There have been quite a number of issues reported with third party drives... the Scorpion Blue in particular. This is related to firmware 1.7:
http://discussions.apple.com/thread.jspa?threadID=2054387&start=0&tstart=0

Cannot boot OEM Restore DVD

I am trying to restore my PB to its original state. When I boot from the Restore DVD (10.2.3), shows the grey screen with the Apple logo and the wheel bars, then the You-need-to-restart message in several languages comes up. Tried the double-clicking on the Install Mac OS X icon / Restart button and the Hold-down-C while restarting--same result. Removed added RAM--same. Reset PMU--same. Reset PRAM--same. Did the Hardware Test--all OK. But booting from the installed 10.3.9 is flawless. Short of sending it for repair, does anyone have any suggestion? Thanks!
PowerBook G4 Mac OS X (10.3.9) 12inch 867 Mhz 384MB 20GB

I'm having the identical problem on m 17" powerbook, any ideas?

HT2471 install and restore DVDs for a macbook pro 5.1

hi i have a second hand 15" macbook pro 5.1 model A1286 and would like to get a set of install/restore DVDs anyone help? i am new to Apple have always used a windows pc and after trying the Mac love it!!

Your Mac shipped with discs for Mac OS X 10.5.5. You can call Apple and likely get replacement disks for it. Note that you can upgrade your machine (late 2008) to the latest version of Lion if you like. You do need to get the original set of discs, though. I don't know how much they would run. That would have been Leopard - I wouldn't try getting the discs from Amazon ($250 or so) - I'd try Apple first.
Clinton

MacBook Restore DVD

I need to restore my system and I lost my restore DVDs. Can I use someone else's restore DVDs who has that same model MacBook, as long as we have the same processor? For example, I have the Black 2.0 GHz MacBook pre November 1st upgrade and they have the White model pre November 1st upgrade. Can I use their restore DVD's to restore my system correctly? Please help!!! Thank you.

I'm sure that would work. It's probably against the EULA though. You should contact Apple and explain your situation. Don't quote me but I believe they'll send you replacements at a very reasonable cost.

Restore DVD failure

Similar Messages

Maybe you are looking for