Restore - Error 22 - Invalid Argument

am trying to use Disk Utilities Restore function to create a bootable copy of my current boot drive. I have two internal 60GB drives. I have unchecked the "ignore ownership" box before starting procedure. I booted from my Tiger Install disk. I specified my curent boot drive as Source and selected the other drive as Destination. I also zeroed out my Destination drive before starting and also checked the erase box before starting.
All seems to go well until the very end and I get this error messge. "An error(22) occured while copying, (invalid argument)
Not knowing what to do, I just exited disk utility. If I boot from my Source drive all goes well and if I examine the contents of the Destination drive, I find all my files and apps. I can access fiels and can run programs from this drive.
However, it is not a bootable copy, If I select the Destination drive as the boot drive, then I get a start up screen that is a greyed out symbol for NO (circle with slash through it.) I have to reboot from the original source Drive.
I have followed "Lee's Instructions for Tool A" (previous poster) to the letter.
What to do now? I really need to create bootable copies
dan

Forget Disk Utility, use something like the free Carbon Copy Cloner (repair permissions first and enable "make bootable in CCC prefs) or the very nice Deja Vu which will auto-clone (the whole boot drive) and auto-backup (folders you select) all seemlessly in the background when you want to a external or another drive. (forget cd's or dvd's just not feasible) and the clone is boootable.
Read my text doc on the subject

Similar Messages

Disk Utility, restore image via HTTP, and error 22 (invalid argument)

I'm trying to restore a properly-created and prepared (i.e. volume checksum applied) Apple Software Restore disk image to a volume on a target computer. The source image is hosted on a Web server and accessible via HTTP.
The image restoration process appears to succeed for the most part, but at the end, I get an error 22 (invalid argument). This may be after the image restoration has finished, and when the resulting volume is being mounted. (I wonder if the problem is automount-related?)
The same image, so far, restores to the same volume successfully when restored locally, mounting the drive in target disk mode on the host Mac.
I am curious if anyone else has seen this same behavior and found a solution. Or is everyone else having the same kinds of problems with HTTP-based restores?
MacBook Pro Mac OS X (10.4.9) 15-inch, Core 2 Duo 2.16 GHz, 2 GB RAM

Visit http://www.bombich.com/. See if you find any related info on that site. If not email Mike Bombich about the problem. If anyone knows the answer I would think he should.

ORA-27102: out of memory SVR4 Error: 22: Invalid argument

Hi all,
I'm doing an install of a Solaris 10.2, Oracle 10.2 system. During the Create Database phase, I am getting;
ORA-27102: out of memory SVR4 Error: 22: Invalid argument
Doing some research, and reading through the details here:
Link: [http://technopark02.blogspot.com/2006/09/solaris-10oracle-fixing-ora-27102-out.html]
I think my issue is my SHM parameters, reinforced by the repeated entry in the Oracle Alert log:
+WARNING: EINVAL creating segment of size 0x0000000085000000+*
+fix shm parameters in /etc/system or equivalent+*
when the create fails.
I am not familar with Solaris' new project mechanism, although from what I have read, it seems to be set up properly.
Here are my server details:
# prtconf | grep Mem
Memory size: 8192 Megabytes
# prctl -n project.max-shm-memory -i project 200
project: 200: QBI
NAME    PRIVILEGE       VALUE    FLAG   ACTION                       RECIPIENT
project.max-shm-memory
        privileged      10.0EB      -   deny                                 -
        system          16.0EB    max   deny                                 -
And as for Oracle:
shared_pool_size = 1522029035
shared_pool_reserved_size = 152202903
pga_aggregate_target = 2705829396
sga_max_size = 3439329280
db_cache_size = 1159641169
During the course of troubleshooting, I have:
1 - Increased the amount of SHM allocated in the project. I have tried 16GB, 8 GB, 10 GB, 11GB etc, to no effect, so I reset it to 10GB (as seen above) and focused my efforts elsewhere.
2. SHARED_POOL_SIZE - I have decreased this by roughly 75% from the original value, again to no effect.
3. PGA and SGA sizes - I have increased these from the original values by an increment of 25%
Following the advice from the referenced blog (which does a good job of explaining the logic behind the actions) I have determined that the Alert log error message is telling me that it is lacking
2231369728
(Hex conversion value, which I think I need to read as 2GB, not 100% sure)
I've increased my project allocation, and the PGA sizes, did I just not do it enough?
Any advice?
Thanks for any input,
Troy Shane

Hi,
check following sap note
Note 546006 - Problems with Oracle due to operating system errors
Note 743328 - Composite SAP note: ORA-27102
regards,
kaushal

Rman Linux Error: 22: Invalid argument

Hi,
I have Oracle 8.1.7.0.1 running on Redhat 7.2
When I try to backup database using RMAN I get following
error:
RMAN-03026: error recovery releasing channel resources
RMAN-08031: released channel: disk1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03015: error occurred in stored script live_full_backup
RMAN-03007: retryable error occurred during execution of command: backup
RMAN-07004: unhandled exception during command execution on channel disk1
RMAN-10035: exception raised in RPC: ORA-19504: failed to create file "/u03/oradata/backups/live/db_6_1_482765733.ora"
ORA-27044: unable to write the header block of file
Linux Error: 22: Invalid argument
Additional information: 2
RMAN-10031: ORA-19624 occurred during call to DBMS_BACKUP_RESTORE.BACKUPPIECECREATE
Did anybody see this before ? Any ideas ?
d.

make sure /u03/oradata/backups/live exists and is writable.

[solved] docker: Error mounting: invalid argument

I'm relatively new to using docker. When I had initially set it up (weeks ago) I was able to pull and manipulate containers. Today I came back to my docker project and now I can't even successfully pull an image.
$ docker pull ubuntu:14.04
ubuntu:14.04: The image you are pulling has been verified
511136ea3c5a: Download complete
511136ea3c5a: Error downloading dependent layers
d497ad3926c8: Downloading [============================> ] 115.7 MB/201.6 MB 7s
e791be0477f2: Download complete
3680052c0f5c: Download complete
22093c35d77b: Download complete
5506de2b643b: Download complete
5506de2b643b: Error pulling image (14.04) from ubuntu, endpoint: https://registry-1.docker.io/v1/, Error mounting '/dev/mapper/dock5506de2b643b: Error pulling image (14.04) from ubuntu, Error mounting '/dev/mapper/docker-8:98-380441-511136ea3c5a64f264b78b5433614aec563103b4d4702f3ba7d4d2698e22c158' on '/var/lib/docker/devicemapper/mnt/511136ea3c5a64f264b78b5433614aec563103b4d4702f3ba7d4d26982014/11/14 20:14:12 Error pulling image (14.04) from ubuntu, Error mounting '/dev/mapper/docker-8:98-380441-511136ea3c5a64f264b78b5433614aec563103b4d4702f3ba7d4d2698e22c158' on '/var/lib/docker/devicemapper/mnt/511136ea3c5a64f264b78b5433614aec563103b4d4702f3ba7d4d2698e22c158': invalid argument
This is the log:
$ journalctl -e
Nov 14 20:24:47 example.com docker[18225]: 2014/11/14 20:24:47 docker daemon: 1.3.1 4e9bbfa; execdriver: native; graphdriver:
Nov 14 20:24:47 example.com docker[18225]: [0687b0f9] +job serveapi(fd://)
Nov 14 20:24:47 example.com docker[18225]: [info] Listening for HTTP on fd ()
Nov 14 20:24:47 example.com docker[18225]: [0687b0f9] +job init_networkdriver()
Nov 14 20:24:47 example.com docker[18225]: [0687b0f9] -job init_networkdriver() = OK (0)
Nov 14 20:24:47 example.com docker[18225]: 2014/11/14 20:24:47 WARNING: Your kernel does not support cgroup swap limit.
Nov 14 20:24:47 example.com docker[18225]: [info] Loading containers:
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 07b2a034632f0ddb8f01ebdcf1c0cc4ba0ade7a6d927b544754b44aa3b58f877: open /var/lib/docker/containers/07b2a034632f0ddb8f01ebdcf1c0cc4ba0ade7a6d927b544754b44aa3b58f877/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 0bb0b50393dd951caeaa8386eb8ec8be1cc60e0822167ebed4dfdce9724b618c: open /var/lib/docker/containers/0bb0b50393dd951caeaa8386eb8ec8be1cc60e0822167ebed4dfdce9724b618c/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 15732a4b2a97b91a2c590cab260f91dde7708b50059942221d349a778f94c892: open /var/lib/docker/containers/15732a4b2a97b91a2c590cab260f91dde7708b50059942221d349a778f94c892/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 17b4471d4b031cd24feba6a2dc46e1524bcd9a6bb3b03342a642a5968caff3fa: open /var/lib/docker/containers/17b4471d4b031cd24feba6a2dc46e1524bcd9a6bb3b03342a642a5968caff3fa/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 20686bda195d61f2c76c3e3c809f8b07df9b830d8bc650e10593e1863c82b7f3: open /var/lib/docker/containers/20686bda195d61f2c76c3e3c809f8b07df9b830d8bc650e10593e1863c82b7f3/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 2fe7db68f38445c8ac0124be87174f66ccd1729880c5fa94b93d77ac0aa547fe: open /var/lib/docker/containers/2fe7db68f38445c8ac0124be87174f66ccd1729880c5fa94b93d77ac0aa547fe/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 31b34a085e90849bcffd50c5f7b41d93849d494913448a92849c5d621555251d: open /var/lib/docker/containers/31b34a085e90849bcffd50c5f7b41d93849d494913448a92849c5d621555251d/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 3484c3c05947051eea53865c973100d493e7ec495b3d7a5d4fbc1e5096196733: open /var/lib/docker/containers/3484c3c05947051eea53865c973100d493e7ec495b3d7a5d4fbc1e5096196733/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 3ed275efb25789d6c9e18bf36e46f437fbdb21f3ffd7a93cb4525610737441f0: open /var/lib/docker/containers/3ed275efb25789d6c9e18bf36e46f437fbdb21f3ffd7a93cb4525610737441f0/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 4503890c72d2f728e315b6ecae05fbabba85a3f959898a52df800f6fa22ca094: open /var/lib/docker/containers/4503890c72d2f728e315b6ecae05fbabba85a3f959898a52df800f6fa22ca094/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 4db4ed2fbac1b442d770bcd325937508d2b190caa766f4ddef4f21628a953ea2: open /var/lib/docker/containers/4db4ed2fbac1b442d770bcd325937508d2b190caa766f4ddef4f21628a953ea2/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 56f36a11482d6b9c513cbb819d6c67a768bd47dc4c02bd0de62c61365b6ba363: open /var/lib/docker/containers/56f36a11482d6b9c513cbb819d6c67a768bd47dc4c02bd0de62c61365b6ba363/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 5b254c1c2344f61ab6bf6b338b22150cccd6ebd04407f3d00d6b5b3e37810d4f: open /var/lib/docker/containers/5b254c1c2344f61ab6bf6b338b22150cccd6ebd04407f3d00d6b5b3e37810d4f/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 73fd6f0edadcf67fcdad7a397784275db013df085e648230b5818f0e68e3f48c: open /var/lib/docker/containers/73fd6f0edadcf67fcdad7a397784275db013df085e648230b5818f0e68e3f48c/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 7ad8ad079db979b156af858cd36b908434157efd43e8cbc13677fa287bdf4da0: open /var/lib/docker/containers/7ad8ad079db979b156af858cd36b908434157efd43e8cbc13677fa287bdf4da0/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 82a2e14c00dd73e2df1d78c45a0e576d52637c5dc422c32182ded365d6893167: open /var/lib/docker/containers/82a2e14c00dd73e2df1d78c45a0e576d52637c5dc422c32182ded365d6893167/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 86572f605d7990f173875853bcfbdfe3f909c9b26f439378ab73d561e0e735eb: open /var/lib/docker/containers/86572f605d7990f173875853bcfbdfe3f909c9b26f439378ab73d561e0e735eb/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container 9eecdb0bf364f80cc88532832221da9de86c10a31b24660fdce8b68c79504a88: open /var/lib/docker/containers/9eecdb0bf364f80cc88532832221da9de86c10a31b24660fdce8b68c79504a88/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container a0920424bc83bffbc980f39f6dad17c865f84de1c3508a01d3c1298870f608c1: open /var/lib/docker/containers/a0920424bc83bffbc980f39f6dad17c865f84de1c3508a01d3c1298870f608c1/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container be228e991ffba0d423bb8bdca22fda9e318b7084bae53d765212bed6612e6b01: open /var/lib/docker/containers/be228e991ffba0d423bb8bdca22fda9e318b7084bae53d765212bed6612e6b01/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container e01b5a18f7c252f9c06e6d2dc9720baa184bc803e52aa68e9253372854382213: open /var/lib/docker/containers/e01b5a18f7c252f9c06e6d2dc9720baa184bc803e52aa68e9253372854382213/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container f00aff0df390b90f0a739430b4896cd67afc256a1c657271caf989fd3791ac91: open /var/lib/docker/containers/f00aff0df390b90f0a739430b4896cd67afc256a1c657271caf989fd3791ac91/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .[error] daemon.go:321 Failed to load container f271529997f7479b5b6f65ccdd21d6b91445bbb31a3b253e95b1cf6ad6468c37: open /var/lib/docker/containers/f271529997f7479b5b6f65ccdd21d6b91445bbb31a3b253e95b1cf6ad6468c37/config.json: no such file or directory
Nov 14 20:24:47 example.com docker[18225]: .......................[info] : done.
Nov 14 20:24:47 example.com docker[18225]: [0687b0f9] +job acceptconnections()
Nov 14 20:24:47 example.com docker[18225]: [0687b0f9] -job acceptconnections() = OK (0)
Nov 14 20:24:47 example.com docker[18225]: [info] POST /v1.15/images/create?fromImage=ubuntu%3A14.04
Nov 14 20:24:47 example.com docker[18225]: [0687b0f9] +job pull(ubuntu, 14.04)
Nov 14 20:24:47 example.com docker[18225]: [0687b0f9] +job trust_update_base()
Nov 14 20:24:48 example.com docker[18225]: [0687b0f9] -job trust_update_base() = OK (0)
Nov 14 20:24:48 example.com docker[18225]: [0687b0f9] +job trust_key_check(/library/ubuntu)
Nov 14 20:24:48 example.com docker[18225]: [0687b0f9] -job trust_key_check(/library/ubuntu) = OK (0)
Nov 14 20:24:48 example.com kernel: device-mapper: thin: Creation of new snapshot 0 of device 0 failed.
Nov 14 20:24:48 example.com kernel: JBD2: no valid journal superblock found
Nov 14 20:24:48 example.com kernel: EXT4-fs (dm-1): error loading journal
Nov 14 20:24:48 example.com kernel: JBD2: no valid journal superblock found
Nov 14 20:24:48 example.com kernel: EXT4-fs (dm-1): error loading journal
Nov 14 20:24:52 example.com systemd-udevd[298]: error: /dev/dm-1: No such device or address
Nov 14 20:24:53 example.com docker[18225]: [error] pull.go:151 Error from V2 registry: Error mounting '/dev/mapper/docker-8:98-380441-511136ea3c5a64f264b78b5433614aec563103b4d4702f3ba7d4d2698e22c158' on '/var/lib/docker/devicemapper/mnt/511136ea3c5a64f264b78b5433614aec563103b4d4702f3ba7d4d2698e22c158': invalid argument
Nov 14 20:24:57 example.com kernel: JBD2: no valid journal superblock found
Nov 14 20:24:57 example.com kernel: EXT4-fs (dm-1): error loading journal
Nov 14 20:24:57 example.com kernel: JBD2: no valid journal superblock found
Nov 14 20:24:57 example.com kernel: EXT4-fs (dm-1): error loading journal
Nov 14 20:25:02 example.com systemd-udevd[298]: error: /dev/dm-1: No such device or address
Nov 14 20:25:03 example.com docker[18225]: Error pulling image (14.04) from ubuntu, Error mounting '/dev/mapper/docker-8:98-380441-511136ea3c5a64f264b78b5433614aec563103b4d4702f3ba7d4d2698e22c158' on '/var/lib/docker/devicemapper/mnt/511136ea3c5a64f264b78b5433614aec563103b4d4702f3ba7d4d2698e22c158': invalid argument
Nov 14 20:25:03 example.com docker[18225]: [0687b0f9] -job pull(ubuntu, 14.04) = ERR (1)
Nov 14 20:25:03 example.com docker[18225]: panic: runtime error: invalid memory address or nil pointer dereference
Nov 14 20:25:03 example.com docker[18225]: [signal 0xb code=0x1 addr=0x20 pc=0x6bb9ac]
Nov 14 20:25:03 example.com docker[18225]: goroutine 58 [running]:
Nov 14 20:25:03 example.com docker[18225]: runtime.panic(0xa6bc20, 0x1087c93)
Nov 14 20:25:03 example.com docker[18225]: /usr/lib/go/src/pkg/runtime/panic.c:279 +0xf5
Nov 14 20:25:03 example.com docker[18225]: bufio.(*Writer).flush(0xc2082228c0, 0x0, 0x0)
Nov 14 20:25:03 example.com docker[18225]: /usr/lib/go/src/pkg/bufio/bufio.go:530 +0xdc
Nov 14 20:25:03 example.com docker[18225]: bufio.(*Writer).Flush(0xc2082228c0, 0x0, 0x0)
Nov 14 20:25:03 example.com docker[18225]: /usr/lib/go/src/pkg/bufio/bufio.go:519 +0x39
Nov 14 20:25:03 example.com docker[18225]: net/http.(*response).Flush(0xc20816fa40)
Nov 14 20:25:03 example.com docker[18225]: /usr/lib/go/src/pkg/net/http/transport.go:885 +0x38f
Nov 14 20:25:03 example.com docker[18225]: created by net/http.(*Transport).dialConn
Nov 14 20:25:03 example.com docker[18225]: /usr/lib/go/src/pkg/net/http/transport.go:601 +0x957
Nov 14 20:25:03 example.com docker[18225]: goroutine 118 [runnable]:
Nov 14 20:25:03 example.com docker[18225]: net/http.(*persistConn).readLoop(0xc2080d7130)
Nov 14 20:25:03 example.com docker[18225]: /usr/lib/go/src/pkg/net/http/transport.go:868 +0x829
Nov 14 20:25:03 example.com docker[18225]: created by net/http.(*Transport).dialConn
Nov 14 20:25:03 example.com docker[18225]: /usr/lib/go/src/pkg/net/http/transport.go:600 +0x93f
(snipping several dozen lines of stack trace in the middle there)
The search results for various permutations of "docker error mount invalid argument dm" are badly washed out so I wasn't able to find any helpful leads; nor was I able to find anything relevant in the docker issue list. I tried re-installing docker (by running pacman -Rns docker and then pacman -S docker hoping that it was a config setting I could nuke & pave but this had no effect. I then ran the following:
$ dmsetup ls
docker-8:98-380441-pool (254:0)
followed by dmsetup remove docker-8:98-380441-pool and attempted the pull again. No difference.
I'm convinced this is not a docker bug but a misconfiguration of my system, but the error provided ("error mounting .... invalid argument") is rather opaque and I'm stuck with what to try next.
Any suggestions would be appreciated.
Last edited by cmtonkinson (2014-11-15 11:41:47)

Well, rm -rf /var/lib/docker did it!
I was unable to remove /var/lib/docker/devicemapper ("device or resource busy") but that doesn't seem to matter - as you suggest docker reconfigured itself. Thanks for the tip!
For the record (should have posted this previously):
$ docker info
Containers: 1
Images: 7
Storage Driver: devicemapper
Pool Name: docker-8:98-380441-pool
Pool Blocksize: 65.54 kB
Data file: /var/lib/docker/devicemapper/devicemapper/data
Metadata file: /var/lib/docker/devicemapper/devicemapper/metadata
Data Space Used: 598.3 MB
Data Space Total: 107.4 GB
Metadata Space Used: 1.18 MB
Metadata Space Total: 2.147 GB
Library Version: 1.02.90 (2014-09-01)
Execution Driver: native-0.2
Kernel Version: 3.17.2-1-ARCH
Operating System: Arch Linux
WARNING: No swap limit support
$ docker --version
Docker version 1.3.1, build 4e9bbfa

Fssnap fails by "fssnap: ioctl: error 22: Invalid argument" because of xntp

Hi,
on cluster node fssnap -F ufs -o bs=/xxxx /
fails by "fssnap: ioctl: error 22: Invalid argument" because of xntpd_cluster service.
Is there any workaround?
Many thanks
Ushas Symon

I don't know if we support fssnap on anything other than the root file system because of its interaction with the system and potential to lock file systems for brief periods. If this is on the root file system then may be you could stop and start xntpd_cluster briefly while the snap is being taken.
Of course, the better option would be to upgrade to SC3.2 01/09 and use ZFS for the root file system. I believe support for ZFS boot just squeezed in at the last minute thanks to some excellent work by some of my QA colleagues.
Regards,
Tim
---

Insert error SQLException: Invalid argument(s) in call:

The following exception is produced because resultSet.next() was
called on an empty resultSet why ??
Driver = Oracle 8.1.7 thin (current version 8/30/01) for NT.
Thanks
try
     m_resultSet = m_statement.executeQuery("SELECT
CODE_DECODE.* FROM CODE_DECODE WHERE 0 = 1");
     // NOTE If this statement is not called the code works
fine.
     while( m_resultSet.next())
          // Does nothing as the resultset is empty
     // NOTE If the above statement is not called the code
works fine
     // Insert a row
     m_resultSet.moveToInsertRow();
     m_resultSet.updateObject
("CODE_DECODE.CODE_DECODE_ID",new Double(100000001d));
     // Next statement causes the exception
     m_resultSet.insertRow();
catch(Exception e)
e.printStackTrace();
gives the following stack trace
java.sql.SQLException: Invalid argument(s) in call:
setRowBufferAt
     at oracle.jdbc.dbaccess.DBError.throwSqlException
(DBError.java:168)
     at oracle.jdbc.dbaccess.DBError.throwSqlException
(DBError.java:210)
     at oracle.jdbc.driver.UpdatableResultSet.setRowBufferAt
(UpdatableResultSet.java:1803)
     at oracle.jdbc.driver.UpdatableResultSet.setRowBufferAt
(UpdatableResultSet.java:1785)
     at oracle.jdbc.driver.UpdatableResultSet.updateObject
(UpdatableResultSet.java:1574)
     at oracle.jdbc.driver.OracleResultSet.updateObject
(OracleResultSet.java:2787)
     at com.aceva.tool.toolbox.dbtool.JDBCAdapter.insertRow
(JDBCAdapter.java:440)
     at com.aceva.tool.toolbox.dbtool.DBToolPanel.doInsert
(DBToolPanel.java:289)
     at
com.aceva.tool.toolbox.dbtool.DBToolPanel$4.actionPerformed
(DBToolPanel.java:102)
     at javax.swing.AbstractButton.fireActionPerformed
(AbstractButton.java:1450)
     at
javax.swing.AbstractButton$ForwardActionEvents.actionPerformed
(AbstractButton.java:1504)
     at javax.swing.DefaultButtonModel.fireActionPerformed
(DefaultButtonModel.java:378)
     at javax.swing.DefaultButtonModel.setPressed
(DefaultButtonModel.java:250)
     at
javax.swing.plaf.basic.BasicButtonListener.mouseReleased
(BasicButtonListener.java:216)
     at java.awt.Component.processMouseEvent
(Component.java:3717)
     at java.awt.Component.processEvent(Component.java:3546)
     at java.awt.Container.processEvent(Container.java:1164)
     at java.awt.Component.dispatchEventImpl
(Component.java:2595)
     at java.awt.Container.dispatchEventImpl
(Container.java:1213)
     at java.awt.Component.dispatchEvent(Component.java:2499)
     at java.awt.LightweightDispatcher.retargetMouseEvent
(Container.java:2451)
     at java.awt.LightweightDispatcher.processMouseEvent
(Container.java:2216)
     at java.awt.LightweightDispatcher.dispatchEvent
(Container.java:2125)
     at java.awt.Container.dispatchEventImpl
(Container.java:1200)
     at java.awt.Window.dispatchEventImpl(Window.java:912)
     at java.awt.Component.dispatchEvent(Component.java:2499)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:319)
     at java.awt.EventDispatchThread.pumpOneEvent
(EventDispatchThread.java:103)
     at java.awt.EventDispatchThread.pumpEvents
(EventDispatchThread.java:93)
     at java.awt.EventDispatchThread.run
(EventDispatchThread.java:84)

The stack trace was:
06/09/06 09:02:52 java.sql.SQLException: Invalid argument(s) in call
06/09/06 09:02:52 at oracle.jdbc.dbaccess.DBError.throwSqlException(DBErro
r.java:189)
06/09/06 09:02:52 at oracle.jdbc.dbaccess.DBError.throwSqlException(DBErro
r.java:231)
06/09/06 09:02:52 at oracle.jdbc.dbaccess.DBError.throwSqlException(DBErro
r.java:294)
06/09/06 09:02:52 at oracle.sql.CLOB.createTemporary(CLOB.java:527)
After that I change a code little bit:
clob = oracle.sql.CLOB.createTemporary(c, true, 1);
Ant it pass through, but it fails with CastException. Then I upgraded JDBC driver, because I'm using Java 1.4
So, now I have this kind of error:
at oracle.jdbc.driver.OracleConnection.physicalConnectionWithin(OracleConnection.java:5174)
     at oracle.sql.CLOB.createTemporary(CLOB.java:1009)
     at oracle.sql.CLOB.createTemporary(CLOB.java:956)
     at my.pack.db.impl.ImportDatabaseDAO_JDBC.execute(ImportDatabaseDAO_JDBC.java:68)
It fails when I'm creating temporaryClob:
clob = oracle.sql.CLOB.createTemporary(c, true, 1);
The problem occurs, because my connection driver is:
com.evermind.sql.OrclCMTConnection and it can't be converted into oracle.jdbc.driver.OracleConnection.
It is datasource config:
<data-source location="jdbc/oooDS"
     class="com.evermind.sql.DriverManagerDataSource"
     password="iate"
     xa-location="jdbc/xa/oooXADS"
     connection-driver="oracle.jdbc.driver.OracleDriver"
     username="ooo"
     url="jdbc:oracle:thin:@192.168.45.14:1526:ooo"
     inactivity-timeout="30"
     name="oooDS"
     ejb-location="jdbc/oooDS"
     pooled-location="jdbc/oooPoolDS"
     min-connections="3"
     max-connections="200"/>
Could you advise, how can I convert my Connection class?

NW 6.5 Restore error 20550 Invalid Data Stream

Hi Guys,
Trying to perform a restore using Yosemite Server Backup 8.9 and recieving the above error.
out of 36GB 99% was restore correctly but 6000 files were missing with the above error.
Anybody have any idea what invalid data stream means?
Any help much appreciated
Robbie

Robbiecookie101,
> Anybody have any idea what invalid data stream means?
That it had problems readin the media? Anyway, what does the vendor
say?
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

Online backup getting failed with error BR0278E - Invalid Argument

Hi All,
Online backup in Production system is getting failed when taken using DB13. Last week the SAP Production Server was migrated to SAN and it was up & running fine.
SAP System - ECC 6
OS - AIX 5.3
Database - Oracle 10g
Even the Archive log backup has been successful, but Online backup is failing. Following is the error log:
BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
BR0057I Backup of database: RTP
BR0058I BRBACKUP action ID: bebkzprw
BR0059I BRBACKUP function ID: ant
BR0110I Backup mode: ALL
BR0077I Database file for backup: /oracle/RTP/sapbackup/cntrlRTP.dbf
BR0061I 41 files found for backup, total size 97416.297 MB
BR0143I Backup type: online
BR0112I Files will not be compressed
BR0130I Backup device type: tape
BR0102I Following backup device will be used: /dev/rmt3.1
BR0103I Following backup volume will be used: RTPB01
BR0289I BRARCHIVE will be started at the end of processing
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0208I Volume with name RTPB01 required in device /dev/rmt3.1
BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
BR0226I Rewinding tape volume in device /dev/rmt3 ...
BR0351I Restoring /oracle/RTP/sapbackup/.tape.hdr0
BR0355I from /dev/rmt3.1 ...
BR0241I Checking label on volume in device /dev/rmt3.1
BR0242I Scratch volume in device /dev/rmt3.1 will be renamed to RTPB01
BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
BR0226I Rewinding tape volume in device /dev/rmt3 ...
BR0202I Saving /oracle/RTP/sapbackup/.tape.hdr0
BR0203I to /dev/rmt3.1 ...
We have checked using different tapes, restarted SAP, etc but could not resolve it.
Please suggest further.
Thanks
Vamsi

Hi Vamsi
Please go through below link
Re: onLine backup fails with error BR0278E
There is similar problem with the exact error you are facing for online backup and its solution is given in above link.
Let us know if this information was useful to you.
with regards,
Parin Hariyani

Error in File ~tmp81c59e23760a10.rpt: Invalid argument for database

When trying to run the report via Crystal Reports Server, we get the following error:
Error in File ~tmp81c59e23760a10.rpt: Invalid argument for database.
Opening the report in Crystal Reports 2008 and running a verify database, confirms that everything is working. Yet when we run it through Crystal Reports Server it errors every time.
We are using a Progress ODBC driver which works fine when running reports via Crystal Reports 2008
Can you please shed some light on this.
I have already checked to see if there was a service pack or any other hot fixes available.

Hi Brett,
I believe I have the same error. ie
Invalid Argument provided.
Error in File xxxxx {C8F4D455-6B45-4859-B1B0-3E77619E5AD0}.rpt:
Invalid argument for database."
Have you managed to resolve the issue yet?
We're running Crystal Reports 2008 Basic on MS SQL Server 2005.
The Crystal Report works fine, when run on the server (and/or in terminal server session), but if it is run from a desktop client, which connects to the server, it gives the error above.
So in my case, it must permissions or component related (ie something not loaded, that should be).
I found the following on the internet:
u201DIDataReader supports only one table by default
When you view a report that has tables with the data source set to
IDataReader for each one, and many of the tables are linked together, you
may see the following error message: "Invalid database argument." Calls
made to SetDataSource() from an IDataReader are supported only for
reports that contain one table.
Workaround
To use an IDataReader with multiple tables, create a report with one
command table that selects the necessary fields.u201C
From researching in SAP BOBJ Notes I found somethings to try, or look at, but can't quite tackle them yet. I'll let you know how it goes.
Best Regards,
George

Ipod touch says "invalid argument", I need help

So I have an Ipod touch 1st generation, its been working fine with the wireless connection, a couple days ago its just stopped working, it says I'm connected to my network but every time i try to open safari or i tunes or any app it says invalid argument. I've restarted it, restored it to factory settings, and restored network settings. I don't know what else to do. The IP address is 162. something and idk if it needs to be 192. or what? My laptop and computer work fine on the wireless network. Please help!

Hello
I have the exact same problem as described above, but mine started since version 2.1 for ipod. I left my ipod alone for about a month or so and just tried to go online yesterday, and I realized that I couldn't. After trying some of the things described above I decided to upgrade to the latest ipod firmware since I thought that would fix my problem, but it didn't. Before when trying to connect with version 2.1 I was getting an error saying safari cannot connect to the internet as well as Itunes Store. Now with 3.1.2 firmware it gives me an error saying Invalid Argument. I took my touch to the Apple store where I got it from but the ipod connects there with no problem and they told me they haven't heard of such issue as Invalid Argument.
I will try to follow steps 2 and 3 on the post above even though my router is Japanese one. Would you please tell me why is this happening now? I mean my ipod was working fine about a month ago, but I just didn't use it for that time and now it doesn't work.
Is this a problem of router only or is there anything else I can do to fix this?
I have an ipod touch 1st Gen with 32Gb 3.1.2 firmware
Looking forward to hear from you soon
E
Message was edited by: extremers

Restore BOOTCAMP from .dmg image - Unable to scan (invalid argument)

I'm having trouble getting my maching back in order after a crash. I'm running a MacBook Pro 13" mid-2009 with a Bootcamp partition. Last week my harddrive crashed or something and I wasn't able to boot into either drive. Using the Snow Leopard install DVD and Disk Utility I made .dmgs of the entire HD and each of the partitions (Mac HD and Bootcamp - maybe overkill but..). I have since been able to restore my Mac side from the image, even without installing OSX - I just restored from the image using Disk Util again and everything seems to work fine. But, now I've been trying to do the same thing with my Bootcamp side - I have a separate .dmg for that. Everything seems to go fine except that when I try to restore it tells me the image needs to be scanned and when I scan I get the error message: "Unable to scan BOOTCAMP.dmg (invalid argument)". I've tried using different schemes of compression/ no compression on the image, tried to convert to a .cdr then rename to .iso and restore using Windows' native Recovery option. I even tried Terminal - sudo asr restore -noverify -source _________ -target __________ , but it wouldn't let me drag and drop in the Bootcamp drive icon...
Now I don't know what to do but ask.
Has anyone solved this problem????

Hi, and thanks for your reply.
Is there anyway I can convert my .dmg or .cdr/.iso to something that winclone can use?
ps I did finally get Disk Utility to scan the image. I had to convert it to a compressed .dmg from the uncompressed one and it finished it fine but still in Restore in Disk Util. I can't set the destination as my bootcamp partition.
Looks like I'll have to reinstall everything then eh? Well thanks for your help.

Report fails with " Invalid argument for database." error.

Hi All,
Several of my reports deployed on Crystal Reports Server 2008 server fails everyday with the following error.
Error in File ~tmp121c5dc747685036.rpt: Invalid argument for database.
The error is not consistent, if report A fails today, it is Report B the next day. When I reschedule the reports, they run just fine. They fail only when the daily schedules run at 2:00 AM in the morning. 100 + reports are run at this time and some of the reports that fail run many times with different parameters. Is this error due to scheduling reports many times or is it something else? Appreciate any help with this.
Thanks
Bin

Hi,
can you please check under <BOBJ installation directory>\BusinessObjects Enterprise 12.0\logging in the log files created by the crystal reports job server for additionaly error messages?
Regards,
Stratos
PS: Do you run CRS 2008 V0 or V1?

Invalid arguments error while executing oracle procedure

Dear all,
we have a table hr_emp with fields ecode, ename, edoj.
the following procedure we created to return the table data to our .net app.
CREATE OR REPLACE
PACKAGE pname AS
TYPE T_hr_cursor IS REF CURSOR;
PROCEDURE get_hr_list (P_hrlist OUT T_hr_cursor);
END HRPACK;
create or replace PACKAGE BODY pname AS
     PROCEDURE get_hr_list (P_hrlist OUT T_hr_cursor)
     IS
     BEGIN
     OPEN P_hrlist FOR
          SELECT *
               FROM Hr_Emp WHERE edoj>='01-jan-2009';
     END get_hr_list;
END;
these code edited in a single file [both package and package body] and created successfully.
but, while executing, by typing execute get_hr_list, ORA-00304 error, invalid arguments, is coming. How to resolve this, please help.
also, in sql developer 1.5.3, when we create this, another error is ciming like 'source doesnot have a runnable target'.
Where is the issue? please help

Yes, its great dear...
sqlplus>
declare
hr_cursor hrmain.t_hr_cursor;
begin
pname.get_hr_list(hr_cursor);
end;
Its worked as i got 'pl/sql procedure successfully executed'.
Also, then how i can call this get_hr_list procedure from .net? im using c# and i want to get the result of hr_emp to c#. how i can call the same from c#? any help please

"invalid argument" error message when connecting to the App store after upgrading iphone 4 to 5.0 firmware

Hi everyone,
I have seen many topics about this problem but none of them helped and they seem to date a little bit so I would like to ask again.
here is the situation :
we have two iphone 4 in the house and everything was going fine until we did the update to the new 5.0 firmware. there was no problem while the update had only been applied to the first iphone... but after updating the second one, we now have the same problem on both iphones. We can still connect to the internet from the iphone just fine but the connection is erratic at best with the itunes store because we keep getting cut by this dreaded error message "connection to the itunes store impossible, "invalid argument" occasionnally we'd get a different message that says "connection reset by peer"
- what is invalid argument mean anyway???
- I have tried to renew the lease in the network settings, it didn't work
- I have tried to reset the network setting, it didn't help
- I have checked in the network setting for the IP address, it starts with 192.xx.xx..... which is supposed to be a good thing as opposed to 162.xx.xx....
- I have reset my router, nothing happened...
- I have tried unauthorising my computer to any accounts because we were afraid that using two iphones with two different itunes store accounts one the same computer may have caused these problems.. but no luck
I am running out of ideas, I would like to renew my frustration to apple because we buy these expensive products and still seem to suffers from stupid bugs... I was under the impression that these things were tested !!! anyway if anyone has found a definitive solution to this problem (short of burning your iphone out of anger) it would be deeply appreciated.
thx

Hi!
I'm also using Air SDK 15 and I'm getting Invalid Bundle Error:
Adobe Air iOS Invalid Bundle
The bundle does not support the minimum version os specified in info.plisthttp://stackoverflow.com/questions/26047837/adobe-air-ios-invalid-bundle-the-bundle-does-n ot-support-the-minimum-version-os
Really need help
Michael

Restore - Error 22 - Invalid Argument

Similar Messages

Maybe you are looking for