Restore everything from 2 days ago?

How does one revert computer to what it was 2 days ago?? I lost all photos and when I try and restore the iphoto library it say not enough disk space?

the power went off in our house at 10:00 AM yesterday. Now the printer cannot be seen or reinstalled.
Here is what I think happened:
You network reconfigured itself and changed some IP Addresses.
In order to communicate properly, all your computers and printers must have similar, but not quite identical, IP addresses. It may be your Router/Base Station went back to defaults instead of the way it was set up before. What you need to do is to get each printer and each Mac to tell you its IP Address.
Your Router/Base Station may have a number like 192.168.0.1 or 10.0.0.1.
Your Mac should have a similar number, but slightly higher. (can be seen in System Preferences > Network > Airport). This is usually set automatically by asking the Router/Base station to tell it what address to use.
Your Printers must each have a similar address. If your printer has a display, it can be asked to show its IP Address in the display. Otherwise certain Test Print pages will show the IP Address.
If the Printer IP Address is in a different range from the Router, it was probably set manually, and you will hve to decide what range to use for all devices going forward, and get all your equipment using the same range of addresses.

Similar Messages

  • My iPhone 5 is in recovery mode but i want to save my pictures and videos! is there any way i can do that? i have a back up from 2 days ago and i don't have my iCloud sync with my photos

    is there any way i can do that? i have a back up from 2 days ago and i don't have my iCloud sync with my photo

    When restoring from the backup, whatever is included with the backup from two days ago should be restored which includes photos/videos in the Camera Roll at the time of the backup along with all other data included with the backup at the time of the backup two days ago.

  • I'm trying a full restore in Lion, but it won't. States that there isn't enough space on the Mac HD. How do I restore everything from a recent Time Machine Backup?

    I'm trying a full restore in Lion, but it won't. States that there isn't enough space on the Mac HD. How do I restore everything from a recent Time Machine Backup?

    Thanks but I think it has something to do with the 'restore'. in the newest iTunes 11, when I click on the tab "iphone", it redirects me to the "welcome to your new iphone" page and asks about doing a 'restore'. I already did a 'restore', but it went to the original factory settings and I want to 'restore' to my lastest back up as of April 12. When I choose that option, it says my iphone doesn't have enough space. I don't know how much I need to delete in order to make it work. I've deleted lots, but it only has 4.1 GB available. I'm not sure why this isn't enough to do a 'restore'. I don't want to delete all my photos and videos, but maybe I will have to?...7.7GB is used up for that. I can't sync or do ANYTHING...

  • I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?

    I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?
    Where do I find this library?
    thanks
    Shak

    Twas quite a hassle if I am honest which was eventually resolved but I don't feel qualified to help anyone through the process as it required a trip to my local apple store and a genius bar appointment.
    Personally, I would do anything like moving pictures out of folders etc. Certainly not creating a new users. i don't think that is an elegant solution
    Try the following which MAY just about rescue the situation for you but if they don't work you may have to do something more drastic.
    (1) Holding down Cmd & Alt at the same time, start iPhoto by clicking on the iPhoto icon. From the resulting menu choose Rebuild photo library by selecting all available options given to you and then pressing REBUILD!
    If that doesn't work
    (2) Fire up Utilities. Go to migration assistant. Chose 'From another Time machine back-up'. Open the 'Users' option that comes up next and from there select Pictures, then uncheck everything else like Applications etc (you don't want to do a full migration of everything) and click go.
    If that doesn't work, take a deep breath and this step is rather complicated but it worked for me. First of all close iPhoto! Then go to new Finder window.
    From the Finder window choose Pictures, then iPhoto library, press CMD and the letter i. It brings up a new window. Go to Sharing & permissions. From there select the padlock to unlock settings. and then select User account, then press the 'cog' icon next to +/- abd choose Apply to enclosed items.
    This may take a while. Once completed, re-open iPhoto.
    And that should (I stress should) cure it.
    Good luck.

  • Macbook Pro 13'' slow video downloading from some days ago: why?

    From some days ago my Macbook Pro 13'' download video clip very slowly. Someone helps me.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

  • Why can't i see previous backups from two days ago?

    why can't i see previous backups from two days ago?  I only see ones from last year..I sync my phone every time i'm home.

    See Pondini's TM FAQs for starters.

  • My calendar widget shows events from several days ago.

    My calendar widget shows events from several days ago instead of displaying the current day's events.

    Hi Bernard,
    I've also had a few strange errors while making iOS apps - odd popup errors 'like the ones your getting' would appear saying something unrelated to the real issue.
    Take another look over your code around the area where you think the error happens, I had a left over 'playdone' command copied across from a large block of code (very sloppy) - anyway it cause the same type of problem
    I find It's better to go off the error messages from your dir code on the mac - then the iOS projector errors.
    regards
    milky

  • How to research a long running job from 3 days ago

    Re: How to research a long running job from 3 days ago
    Client called to say that a job that normally runs for 6 hours ran for 18 hours on 11/01. 11/01 was a Saturday, and end of month. The long running job writes to a log and I can from the log that that the problem started right around 10:43am. Every step
    before 10:43 was taking the normal amount of time. Then at 10:43 a step that takes seconds hung for 12 hours. After 12 hours the step finished and the job completed successfully.
    I looked at the SQL Log, Event Log, Job History (for all jobs). What else can I look at to try and resolve an issue that happened on 11/01/2014?

    It does execute an SSIS package.
    Personally I feel this as kind of bug in SSIS package but I am not expert in SSIS so I would move it to SSIS forum. Please update your question giving complete information what SSIS package does.
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty.  No music, movies etc are there.  Please help thanks

    I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty.  No music, movies etc are there.  Please help thanks

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Windows images, but you get the point. Depending on the age of your library the library file might not include the .itl extention. Make it match the file you are replacing.
    See MusicFolder Files Not Added and Super Remove Dead Tracks for tools to catch up with any changes since the backup file was created.
    tt2

  • Restore Data from Previous Day

    I have my SQL Database Web Edition hosted on Azure, some stupid user deleted his data, how can I restore from previous day data? 
    TIA
    SV

    Hi vai,
    According to your description, as Mekh’s post, Microsoft Azure SQL Database service has built-in backups to support self-service Point in Time Restore ,Geo-Restore, Point in Time Restore and Geo-Restore are enabled for Basic, Standard, and
    Premium service tiers.
    In a SQL Azure Web database, you need to create a backup, then it will restore and protect your data from application or users errors.
    There is an article about how to setup a backup and restore strategy for a Windows Azure SQL Database. You can review it.
    http://www.mssqltips.com/sqlservertip/3057/windows-azure-sql-database-backup-and-restore-strategy/
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • How can I revert Firefox back to previous settings from 10 days ago?

    The page is no longer showing some boxes on a webpage, like login boxes on some sites, drop down menus on others, nor the bar at the bottom that used to show weather, NoScripts status, etc. I do not know what I changed (or IF I changed anything) to get this result, but I have to use IE now to view many sites because I don't have complete functionality now. I just want to know if I can go back to a point, say 10 days ago, when it was working correctly.

    You seem to have hidden the Add-ons toolbar: View > Toolbars > [X] Add-on Bar
    Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.
    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings.
    * http://kb.mozillazine.org/Website_colors_are_wrong
    * http://kb.mozillazine.org/Websites_look_wrong
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Restore photos from 7 months ago on iphone 4s

    I have extremely important photos I need from 7 months ago. I have been constantly syncing my Iphone with Itunes since I deleted them and I understand that the photos could be lost forever. However if there is even a slim chance I can get them back that would be a huge help.

    http://support.apple.com/kb/HT5125?viewlocale=en_US&locale=en_US
    When you take photos with your iOS device or when you import photos from your digital camera to your computer, iCloud automatically uploads new photos from your Photo Stream to iCloud and pushes photos to all of your other devices.
    Similarly, when you delete a photo from your Photo Stream on an iOS device or a Mac, or on a PC using iCloud Control Panel, that photo will be deleted from the Photo Stream view on all your devices and computers. Each device must be using the required software (see below), and have Photo Stream enabled. Deletions occur automatically as you connect each device to either Wi-Fi or Ethernet.
    Copies of Photo Stream photos you have saved to your Camera Roll on an iOS device or imported into events in your iPhoto or Aperture library, and photos you have copied into a folder on your PC that's not part of My Photo Stream, will not be deleted when you delete photos from Photo Stream.

  • HT1766 trying to restore to a back up version of my iphone from 2 days ago, but it states i do not have enough memory...help

    Looks like my daughter deleted one of our calendars; trying to restore a backup version of my iphone, but it errors ouy stating not enough memory...called Apple but they will not help for free as the phone is out of warranty...

    Yes my itunes is up to date 11.0.2(26) and yes I am clicking the restore button as I should be, however it is giving me this memory error; i even removed all my photos from the phone to increase the availiable memory (right now I am using less than half the available memory), it still did not work.
    I suspect something more than user error here...

  • Finding iCal from 4 days ago in it's entirety

    Accidentally deleted my calendars and cannot find them on Time Machine. Found partial calendars, but still missing lots of info. Is there a way to find my calendars completely in Time Machine? If so, how? Desperate--lost everything and we live by our calendars.......

    sorry--will need a little more information to do this. I found the restore in iCal, but when I get to calendars there are 6 different folders. I have already imported these from time machine, but am still missing a lot of info

  • Restoring calendar from several months ago cloud

    How can i restore a previous calender from months ago, which uses icloud please

    Luke,
    If you use Time Machine or have a backed up .ics file, Restoring iCloud calendars from Time Machine by Roger Wilmut may be helpful.

Maybe you are looking for

  • How to change package for Process chain

    Hi Experts,            How do i change the package in the Transport connection. Iam transporting a PC from D to Q. 1. I have some routines created in the infopackage.So i selected this one in the transport connection. I noticed under infopackages the

  • How do you make an application open on a specific monitor?

    How do you make an application open on a specific monitor? I have two monitors, and I was able to get Firefox to open on the secondary display always by resizing it with the option or command key [I forget which one] and then quitting it. Now everyti

  • Previous employer Income

    Hello Friends, We are facing the problem in Printing of FROM-16 FY 2010-11 related to Previous Employer Income, PF and Tax. We have maintained the previous employer INCOME, PF and TAX (infotype 580) for TAX projection/deduction on monthly basis only.

  • PSE 9 cant open file

    just bought a Nikon d800, shot a wedding yesterday, downloaded my photos, running pse9 on windows vista, and cant open any of the files, shot in raw, 'because  it is the wrong file type' ....help please !!  jen

  • Regarding SMTP Relay in Exchange

    Hi Everyone  i am having problem in capturing mail sent via SMTP . Actually we set up  automatic notification to the vendors for payment notification via Navision. we setup mail using SMTP of Exchange Server . The automatic notification is working pe