Restore face recognition error

I have Elements 12. I don't have rarely used the face recognition feature. When I attempt to open my organizer, I can see my last worked photos and a screen pops up saying it is restoring the 'people recognition data'. It stops at 3% loaded and a Microsoft error window appears telling me the program failed, it searches for a repair it can't find, then closes my program. I can open the editor using a photo on my desktop but I need to search for photos in on my C drive and open them in edit one at a time. I am very frustrated. I recently purchased a Canon 70D and shoot RAW and JPEG files. Is there a fix for this?

> don't really understand the instructions going through the CMD route
Using CMD you could enable the real Admin account but as far as I know you can uninstall the Face Recognition software in control panel -> software
Here remove the face recognition and reboot the notebook.
This should work too.
>There are 2 drivers on the Toshiba website, but the latest is from 2010, did this work for you, as it didn't for me?
It would be interesting to know the notebook model. But the latest version should work properly.
Important is that you would remove the old version from the system firstly!

Similar Messages

Face Recognition Error - you don't have permission to perform this task

Hi..
I bought my TOSHIBA laptop from Spain, so it would be in Spanish for sure ..
When i started the lap for the first time I tested the face recognition and other Toshiba software and they all worked .. but after two days i changed the display language to English and now i can't enter face recognition.
It tells me "You Do not have permission to perform this task. Please contact your administrator for help" ..
so what should i do ???

> don't really understand the instructions going through the CMD route
Using CMD you could enable the real Admin account but as far as I know you can uninstall the Face Recognition software in control panel -> software
Here remove the face recognition and reboot the notebook.
This should work too.
>There are 2 drivers on the Toshiba website, but the latest is from 2010, did this work for you, as it didn't for me?
It would be interesting to know the notebook model. But the latest version should work properly.
Important is that you would remove the old version from the system firstly!

I can't open Face Recognition on Satellite L755-m1ku

I just bought Satellite L755-m1ku
i can't open Face Recognition ,i even tried to run it as administrator but it keep giving error " You don't have permission to perform this task. Please contact your administrator for help .
waiting for your help !

Yes i fixed it by removing the face recognition which installed and downloaded it from toshiba site then i installed it again and it works now thanks :)

Satellite L505-12Q...having a problem with Face Recognition

Hello!
I have a strange problem with my Face Recognition. Yesterday it worked perfectly, but today it doesn't. Note that I've cleaned registry with CCleaner, but didn't backup before that (stupid..).
I've downloaded the installation of Face Recognition from Toshiba's support and download site, but to install it you must uninstall the old program. OK, but at the and of the uninstallation comes an error, quote: "Error 1326.Error getting security: C:\ProgramData\TOSHIBA\SmartFaceV\ GetLastError:5".
Than the uninstallation rolls back and I receive another error, quote: "Error -1603 Fatal error during installation. Consult Windows Installer Help (Msi.chm) or MSDN for more information."

Hi mate
As far as I know you can set the OS back to the early time point
Try to roll back the OS to the early point before you made all the changes
As far as I know the CCLeaner allows you to uninstall the installed applications as well. It cleans the faulty files too maybe you should clean it again before installing this application again
It's definitly worth a try!!!

Photoshop elements, Programm crash while the face recognition

I installes an update from PS elements 8.0 to 12.0. After I have converted the catalog, I startet PS elements 12. I saw my pictures for a second. Then the screen "Face recognition" occured. Then the Programm ist closed with an error. Can I deactivate the face recognition? Or better, solve the problem?

We just have the exact problem here. PSE 8 - Upgrade to PSE 12 - start 12, face recognition starts and PSE 12 closes/crashes.
Uninstalling and reinstalling PSE12 did not help. Turning of the recognition is not possible as PSE12 crashes before any settings could be done.

Face recognition no longer works in Photoshop Elements 12?

Have Version 12 and face recognition no longer works - tried deleting and reinstalling but it did not help. Any suggestions to what is wrong appreciated.

Hi,
Which operating system are you running on?
You say face recognition no longer works - I'm assuming that it was working at some time.
Why do you say it is not now working?
Do you get any error message?
Does your existing matches show up on the people tab?
Do you have the automatic option checked? (Edit -> Preferences -> Media Analysis - Analyze photos for people automatically)
Do you have View -> People Recognition checked?
Brian

During a library rebuild, 'Restoring Faces' continues endlessly...I have no faces identified in my pictures.

During an Aperture Library rebuild, process hangs at RESTORING FACES for hours, rebuild does not progress beyond this stagnation. My library contains no identified faces to restore.
Rebuild was indicated when I attempted to update my vault.

Try an All Images Search:
In the Finder:
Command - f
Kind: Images
Size: Greater than 300kb (This is to avoid all the thumbnails, icons and so on.)
Set it to search the Mac.
As to why? The most likely answer is user error, I'm afriad. It does point up the importantce of always having a back up.
Regards
TD

Satellite A300-22F - Face Recognition can't use the webcam on Vista 64

Hello everybody,
I've got a big problem with the Face recognition tool and my operating system Windows Vista.
Yesterday I installed Windows Vista 64bit on my new Sat. A300-22F Notebook because the preinstalled
version of Windows was only 32bit and I've got 4gig of RAM.
So, all drivers are installed and all works. The webcam driver with the webcam program works, too.
But when I start the Face Recognition tool, an error appears that the webcam can't be initialised or that
the webcam is in use and cannot be used at the moment with the program.
So, no program uses the webcam. The webcam works with other tools. And in the settings of the face tool
are the webcam still available, but without working.
Anyone an idea?
I've got the webcam drivers directly from Toshiba.
Thanks.
Greetings.

Hi!
Do you have start up programs that uses the camera like Skpye or MSN?
Check this!
Are you using the newest version of the Toshiba drivers and tools? Look on the Toshiba website for an update.
Furthermore I would try to update the BIOS. You can find it on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Bye

Restoring People Recognition hangs PSE12

I upgraded my computer from XP to Windows 7 and installed all the updates for Windows 7 before installing PSE12.
After installing PSE12, I converted my PSE8 organizer catalog to PSE12. I had to rename the catalog since the default name was already used. The conversion worked fine and the photos showed up in the browser.
However, a process started called "restoring people recognition". I only used face matching a few times in PSE8 and don't really want to use it in PSE12. Anyway the process showed 9% completion and stops and PSE12 organizer is unresponsive. At this point I cannot use the organizer since it gets hung on the "restoring people ..." process even after rebooting. Also, I looked for a process to kill in the task manager but was only able to kill the entire PSE12 organizer. Any suggestions?

Moving this discussion to the Photoshop Elements forum.

Update 5.7.1 no face recognition

Dear Community
i've received my lightroom 5 with my canon camera.
After reading that the update 5.7.1 adds face recognition i hit the update button but i received a 404 error at the adobe page.
So i googled the File and downloaded it via the adobe Website.
Lightroom_5_LS11_mac_5_7_1.dmg This told me that i'm able should be able to use face recognition. But i receive a update message that i should update lightroom
If i look at About Program there is the right Version.
Message about the update attached.
Message about software attached.
Thank you in advance for any suggestions.
Tim

I think the mistake is Lightroom treats this as a simple "update," but it's really entirely "New Software" apart from a regular update. One part of the screen says "Update," and just below it says "New Software."
I also was mislead. You're not alone!
Or maybe they don't have the correct update file on their website.

Restore software 552 error - cant restore the os?

this is the 2nd time i had the restore sofware 552 error but this time i cant restore the operating system and have to get hte phone replaced. this hapeend after rebooting after installing a program. last time it was bc i deleted a program. has anyone had this problem?
www.whatsgoodblog.com
What's Good is your one stop site reviews about everything.
http://www.whatsgoodblog.com/featured/how-to-install-beta-os-or-other-carrier-os-on-blackberry-with-desktop-manager-for-mac/

This software error has occurred on two different BlackBerry Tours, each of which I returned for replacement (I also had to replace a third one because the front face plate was loose). So I'm now on my fourth Tour after purchasing the first one a little over a week ago. Bad part is, I can't even attempt a restore, since I own a Mac and the necessary software isn't available yet. When I went to return the second Tour after getting the error message, I called BlackBerry support and was told to borrow a phone, go to public library, install the software on a PC, call her back, and she'd walk me through the process. This, after informing her that a sales rep was kind enough to have already attempted a full restore using his PC lab top and that the restore that failed to work.
In any case, as noted at the start of the thread, the problem occurred while installing software from App World (two different applications). Now that my FOURTH Tour is all set up with my "must-have" applications, I won't be installing any additional software in the near future, no matter how important it would be to own. Which means my BlackBerry will never be the 100% useful tool that I bought it for to begin with. I find it rather disturbing as well that installing a small application (from BlackBerry's own app store no less) can wipe out the phone's entire operating system. Even if the phone COULD be restored, it still means hours of updates, reinstalling applications, setting up custom ringtones, etc. (although perhaps this process is easier for PC users).

Face recognition and Optimus technology for T410 questions-plz support

Hi guys, I bought a T410 with NVS 310 graphic card and integrated webcam. Though the 9 cell battery works really well, I still love to save more power by using the integrated Intel graphic card in light load. This is supposed to be done by using NVIDIA Optimus but I cant' find it anywhere or how to activate it. Some said it depends on the drivers and I haven't try that yet. Plz help for longer time.
The next question is the face recognition software, as my friend's Asus laptop, it has Smartlogon using face. I really love to do it on my T but I searched so many places and still can't find this. I knew there used to be VeriFace which seems to be stopped developing for Thinkpad. So anyone has that software, plz give me the link.
And I once found an issue with a device called Lexmark X422, window 7 reports that it can't start (code 10), I try the new driver and still no use. I disable (uninstall) it then restore the whole system and now I can't find it in device manager to try to fix it again. My question is what is this device and how to fix those problems?
Thank you very much, T rocks!
Don't get mad, get even
Solved!
Go to Solution.

Hi and welcome to the forum!
For Optimus, have a look:- http://support.lenovo.com/hk/en/HintsandTips/hints_show_12832190176531.html
Lexmark X422 was probably your webcam, there is no need to do anything about it if the camera is working fine now.
Not sure about face recognition, as far as I know there is no such feature for ThinkPads.
Hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Why does Face Recognition drop confirmed faces

I guess Face Recognition is not ready for prime time. Sometimes after a face has been confirmed, it will just disappear.

Hey nonnalg,
Thanks for the question. I understand that you are experiencing issues with AirPrint, specifically not being able to find the printer after a short amount of time. The following resource may provide a solution:
About AirPrint - Apple Support
http://support.apple.com/en-us/HT201311
For best results
Make sure your software is up to date. For iOS, verify that your device is using the latest version of iOS available and that the app you're printing from is up to date. For OS X, Use Software Update to update OS X and apps you've purchased from the Mac App Store.
AirPrint printers connected to the USB port of an Apple AirPort Base Station or AirPort Time Capsule are not supported with AirPrint. Connect your AirPrint printer to your network using Wi-Fi, or connect it to a LAN port on your AirPort device using Ethernet.
Make sure that your AirPrint printer is connected to your network before attempting to print. Some AirPrint printers can take several minutes to join a network after being turned on.
If you're unable to print
Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
Make sure your printer has paper, and enough ink or toner installed.
Make sure your printer is connected to the same Wi-Fi network as your iOS device.
Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
Thanks,
Matt M.

HT1212 I am unable to get our of a continuous cycle when trying to update or restore my iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.

When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

My 4th Gen iPod wont restore because of error 3194. PLEASE HELP?

It went into recovery mode, and so i plugged it into iTunes. However when I plug it up it says it needs to be restored, and it wont restore because of error 3194. Nothing I have read yet is helping.

Okay! I may have a solution for some of you! I have a 4th gen click wheel, and it was doing the whole restart thing over and over, but never getting past the apple logo.
You need to get to the diagnostic mode. To do this I had to hold down the select and rewind buttons at the same time. (for some models it's the sel/ff buttons or the ff/rw at the same time. The Apple logo will briefly appear backwards, and then you should hear a chime. My screen came up as:
IRAMPASS
PLAY TO CONTINUE
(and some other junk)
press play.
Another menu will come up, scroll through the menu (my Ipod I had to click ff to scroll through. There were 3 pages to scroll through. I got to disk mode on that menu and with the ipod connected to my computer, I started disk mode. Once disk mode started my computer recognized the ipod (finally) and I was able to restore from the computer.
I did lose all the music stored on it, but I'm happy to have made this progress, considering when I got this ipod from a friend two days ago, who was about to throw it in the garbage, it would not even turn on!
Hope this post helps someone!

Restore face recognition error

Similar Messages

Maybe you are looking for