Restore failure sql server 2012
Hi All,
SQL VERSION :
Microsoft SQL Server 2012 - 11.0.2100.60 (X64) Feb 10 2012 19:39:15 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor).
I have taken a backup of a database say A and trying to restore the same backup over a new database B. When I try restoring it it fails with error : Exclusive
access could not be obtained because the database is in use.
When I uncheck the tail log backup option it doesn't fail but keeps on going for a while. MDF size is about 2 GB and ldf is about 7 GB for the database A.(I know its bad and may be no one has taken a log backup for quite a while)
Moreover , I found that the mdf and ldf file was created for the new database except that it was still performing the restore until I stopped it.
Please guide me whether I need to be more patient or there is some other way around.
Thanks and regards, Rishabh K
I have taken a backup of a database say A and trying to restore the same backup over a new database B. When I try restoring it it fails with error : Exclusive
access could not be obtained because the database is in use.
Thanks and regards, Rishabh K
This message says that some request was connected to database when you were trying to restore. You need to make sure nothing is accessing DB when you are trying to restore close all open SMS windows and query windows. Run below query
use master
go
alter database db_name ser single_user with rollback immediate
go
restore database db_name from disk='location' with replace, recoverey
--edit restore script as per need
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles
HI Shanky_621,
I am working on the dev environment and this is the new DB I have created just before restoring so no body else can request anything.
One question : is there any possibility that there was uncommitted transaction recorded in the log file which is causing so much time to restore ?
Thanks and regards, Rishabh K
Similar Messages
-
How to backup/restore credentials in sql server 2012
Hi, Can any one direct how to restore credentials using T-sql or GUI on SQL Server 2012.
As per BOL, we know how to create credentials.
http://msdn.microsoft.com/en-us/library/ms189522.
But looking for taking backup/restore credentials sql serve 2012.
ThanksHi,
I highly recommend to go from step 1 to the end in this tutorial, but if you realy want to just only to restore than you can start in Lesson 4: Perform a Restore From a Full Database Backup
http://msdn.microsoft.com/en-us/library/jj852091(v=sql.110).aspx
Ronen Ariely
[Personal Site] [Blog] [Facebook] -
SQL Server 2012 restoring database from backup file
Hi All,
1. I was restoring the database from PROD box to DEV box with the deferent name.
For Ex: Both PROD and DEV boxes are having "A" database. Now I am refreshing database"A" from PROD bot to DEV box with name "B". Now while restoring in SQL server 2012 I used GUI and took database name as "A" by default.
by mistake I executed the request. before completing I notice that "A" database in DEV Box went to restoring mode.
Now, in middle I stopped the query but still I am seeing database "A" is in restoring state.
Please guide me is there any way to bring database online with current data?
2. Why sql server 2012 takes tail log backup of the existing database while restoring database with different name?Hi,
check this link for the same issue and solutions:
http://stackoverflow.com/questions/520967/sql-server-database-stuck-in-restoring-state
Ronen Ariely
[Personal Site] [Blog] [Facebook] -
Failure installing Sql Server 2012 x64
Hello,
I am trying to install Sql Server 2012 x64 with SP1, but I am running into the following error(s). It occurs almost immediately after I run "setup.exe":
<error>
TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
There was a failure to initialize a setting from type Microsoft.SqlServer.Configuration.SetupExtension.InstallSharedDirSetting.
Error code 0x8564000E.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&EvtType=0x9F9575BA%25400x38AD03A5
BUTTONS:
OK
</error>
Any ideas what else I can do to get past this?Well... Don't know when I downloaded the original ISO image file. I re-downloaded, and now it extracted, and I ran it, which now I get the expected SQL Server Installation Center.
-
I am installing SQL Server 2012 Developer (from ISO image written on DVD), my machine has Windows 7 (Edit: Windows 7 with service pack 1) on it. This machine already has SQL Express and SQL 2008 R2 Express installed in it.
On running 2012 setup it goes fine from Setup Support Rules to Installation Progress. In Installation Progress after some progress installation fails.
Windows show the following components couldn't installed:
Managment Tools Complete Failed. Client Tools Connectivity Failed. Client Tools SDK Failed. Client Tools Backwards Compantibility Failed. Managment Tools Basic Failed. SQL Server Data Tools Failed. Reporting Services -Native Failed. Database Engine
Services Failed. Data Quality Services Failed. full-Text and Semantic Extractins for Search Failed. SQL Server Replication Failed. Integration Services Failed. Analysis Services Failed. SQL Client Connectivity SDK Failed.
In detail for failure of every component it provide these details:
Action required:
Use the following information to resolve the error, and then try the setup process again.
Feature failure reason:
An error occurred for a dependency of the feature causing the setup process for the feature to fail.
In summary log file it provide the following details:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068643839
Start time: 2012-07-31 16:23:37
End time: 2012-07-31 16:33:32
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for Conn: Use the following information to resolve the error, and then try the setup process again.
Next step for SDK: Use the following information to resolve the error, and then try the setup process again.
Next step for BC: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for BIDS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for DQ: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Next step for IS: Use the following information to resolve the error, and then try the setup process again.
Next step for AS: Use the following information to resolve the error, and then try the setup process again.
Next step for SNAC_SDK: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: Haansi-PC
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2005 SQLEXPRESS MSSQL.1
Database Engine Services 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SQL Server Replication 1033 Express Edition
9.4.5000 No
SQL Server 2005 SQLEXPRESS MSSQL.1
SharedTools 1033
Express Edition 9.4.5000 No
SQL Server 2005
Tools 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient 1033
Express Edition 9.4.5000 No
SQL Server 2005
ToolsClient\Connectivity 1033 Express Edition
9.4.5000 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 Database Engine Services 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2 SQLSERVER08EXPR2 MSSQL10_50.SQLSERVER08EXPR2 SQL Server Replication 1033
Express Edition 10.50.1617.0 No
SQL Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1617.0 No
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2318.0 No
SQL Server 2012
Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SS2012
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: TABULAR
ASSVCACCOUNT: NT Service\MSOLAP$SS2012
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Manual
ASSYSADMINACCOUNTS: PC\Haansi
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, BIDS, CONN, IS, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SS2012
FTSVCPASSWORD: <empty>
HELP: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SS2012
INSTANCENAME: SS2012
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SS2012
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Manual
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SS2012
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Haansi-PC\Haansi
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools SDK
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Data Tools
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Integration Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: Analysis Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Feature: SQL Client Connectivity SDK
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\SystemConfigurationCheck_Report.htmPlease help.
I did what you suggested, but, still got error message to install SQL server data tools: Here is the log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068037632
Start time: 2014-09-29 15:05:38
End time: 2014-09-29 15:15:55
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SSDTBI_VS2012: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: MSBI
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2008 Management Tools - Basic
1033 Express Edition 10.0.1600.22 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Basic
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Management Tools - Complete
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Client Tools SDK
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 SQL Server Data Tools
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Integration Services
1033 Enterprise Evaluation Edition 11.0.2100.60 No Yes
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9f7a58aa5d6d76ffe6be968a4ad339f5\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x86
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SSDTBI_VS2012, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\ConfigurationFile.ini
Detailed results:
Feature: SQL Server Data Tools - Business Intelligence for Visual Studio 2012
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio Tools for Applications 2012
Component error code: 0x80044000
Component log file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\VSTA2012_LangsSupport_Cpu32_1.log
Error description: VS Shell 2012 installation has failed with exit code -2147205120.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3436.0&EvtType=VSTA2012_LangsSupport%40Install%400x-2147205120
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\SystemConfigurationCheck_Report.htm -
How to restore a database backup taken from a SQL Server 2012 instance to SQL Server 2014
I am trying to restore a database backup taken from a SQL Server 2012 instance to my new SQL Server 2014 instance. When I add the .bak through the Mgmt studio UI, it does not seem to find a backup set in the file so I cannot proceed (does not give
me any errors though either. I tried restoring through TSQL command but only got a database restore terminating abnormally error with no other details. How can I restore this database to SQL 2014?Hello,
Please examine SQL Server Error Log and share with us any error you can find. The following article may locate the log:
http://msdn.microsoft.com/en-us/library/ms187109.aspx
Regards,
Alberto Morillo
SQLCoffee.com -
Hi all,
Has anyone come across SQL Server 2012 SP1 CU8/9 failing to install with a “Failed to retrieve data for this request.” error.
The error is too generic for a useful search on web, for me at least anyway.
Had no problems patching a whole bunch of other servers in the same environment.
I’m no good at reading these error logs. For some reason the primary replica is referenced in the detailed log???
The CU8/9 patch has been run by both Domain Admins and local Admin with no luck.
We are trying to patch a secondary failover replica. (SharePoint 2013 is installed on this server.)
This is from the summary log:
Overall summary:
Final result: The patch installer has failed to update the shared features. To determine the reason for failure,
review the log files.
Exit code (Decimal): -2146233088
Exit facility code: 19
Exit error code: 5376
Exit message: Failed to retrieve data for this request.
Start time: 2014-04-10 11:51:11
End time: 2014-04-10 11:51:49
Requested action: Patch
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3412.0&EvtType=0xB2652E58%400xDC80C325&EvtType=0xB2652E58%400xDC80C325
Machine Properties:
Machine name: VMSPDB2
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: Australia
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database
Engine Services 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server
Replication 1033 Enterprise
Edition 11.1.3000.0 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text
and Semantic Extractions for Search 1033 Enterprise Edition 11.1.3000.0 No
Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data
Quality Services 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Management Tools - Basic 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Management Tools - Complete 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012
Client Tools Connectivity 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012
SQL Server Data Tools 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Integration Services 1033
Enterprise Edition 11.1.3000.0 No Yes
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 1
KBArticle: KB2931078
KBArticleHyperlink:
http://support.microsoft.com/?kbid=2931078
PatchType: QFE
AssociatedHotfixBuild: 0
Platform: x64
PatchLevel: 11.1.3412.0
ProductVersion: 11.1.3000.0
GDRReservedRange: 10.0.1000.0:10.0.1099.0;10.0.3000.0:10.0.3099.0
PackageName: SQLServer2012-KB2931078-x64.exe
Installation location: e:\90a192411a98d1f6dc\x64\setup\
User Input Settings:
ACTION: Patch
ALLINSTANCES: false
CLUSTERPASSIVE: false
CONFIGURATIONFILE:
ENU: false
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTANCEID: <empty>
INSTANCENAME: <empty>
QUIET: false
QUIETSIMPLE: false
SQMREPORTING: false
UIMODE: Normal
X86: false
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
Message:
Failed to retrieve data for this request.
HResult : 0x80131500
Data:
HelpLink.ProdName = Microsoft SQL Server
HelpLink.BaseHelpUrl =
http://go.microsoft.com/fwlink
HelpLink.LinkId = 20476
HelpLink.EvtType =
0xB2652E58@0xDC80C325
DisableWatson = true
Stack:
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
Inner exception type: System.ComponentModel.Win32Exception
Message:
Not all privileges or groups referenced are assigned to the caller.
HResult : 0x80004005
Error : 1300
Stack:
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey
key)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey
machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView,
String regPath, RegistryAccess registryAccess)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
And the tail of the detailed log:
(01) 2014-04-10 11:51:29 Slp: Completed Action: InitializeMsiExtension, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: AddPackageModifierSourcesAction
(01) 2014-04-10 11:51:30 Slp: Completed Action: AddPackageModifierSourcesAction, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: InitializeConfigAction
(01) 2014-04-10 11:51:30 Slp: Completed Action: InitializeConfigAction, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:31 Slp: Running discovery on local machine
(01) 2014-04-10 11:51:33 Slp: Discovery on local machine is complete
(01) 2014-04-10 11:51:33 Slp: Running discovery on remote machine: VMSPDB1
(01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are
assigned to the caller.
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey key)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess
registryAccess, Boolean& alreadyCached)
at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
--- End of inner exception stack trace ---
at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
(01) 2014-04-10 11:51:36 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction" threw an exception during execution.
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: Failed to retrieve data for this request. ---> Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to
retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey key)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView
regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:36 Slp: --- End of inner exception stack trace ---
(01) 2014-04-10 11:51:39 Slp: Received request to add the following file to Watson reporting: C:\Users\HS2\AppData\Local\Temp\tmp6614.tmp
(01) 2014-04-10 11:51:39 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
(01) 2014-04-10 11:51:39 Slp: Inner exceptions are being indented
(01) 2014-04-10 11:51:39 Slp:
(01) 2014-04-10 11:51:39 Slp: Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
(01) 2014-04-10 11:51:39 Slp: Message:
(01) 2014-04-10 11:51:39 Slp: Failed to retrieve data for this request.
(01) 2014-04-10 11:51:39 Slp: HResult : 0x80131500
(01) 2014-04-10 11:51:39 Slp: Data:
(01) 2014-04-10 11:51:39 Slp: HelpLink.ProdName = Microsoft SQL Server
(01) 2014-04-10 11:51:39 Slp: HelpLink.BaseHelpUrl =
http://go.microsoft.com/fwlink
(01) 2014-04-10 11:51:39 Slp: HelpLink.LinkId = 20476
(01) 2014-04-10 11:51:39 Slp: Stack:
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath,
String clusterDiscoveryDocRootPath)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer
context)
(01) 2014-04-10 11:51:39 Slp: Inner exception type: System.ComponentModel.Win32Exception
(01) 2014-04-10 11:51:39 Slp: Message:
(01) 2014-04-10 11:51:39 Slp: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:39 Slp:
(01) 2014-04-10 11:51:39 Slp: HResult : 0x80004005
(01) 2014-04-10 11:51:39 Slp: Error : 1300
(01) 2014-04-10 11:51:39 Slp: Stack:
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean
enable)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer
ctx, String machineName, SqlRegistryKey key)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx,
String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer
ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String
machineName, RegistryView regView)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:44 Slp: Watson Bucket 2
Original Parameter Values
(01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server
2012@RTM@KB2931078
(01) 2014-04-10 11:51:44 Slp: Parameter 1 : Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process
(01) 2014-04-10 11:51:44 Slp: Parameter 2 : Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege
(01) 2014-04-10 11:51:44 Slp: Parameter 3 :
Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException@-2146233088
(01) 2014-04-10 11:51:44 Slp: Parameter 4 :
System.ComponentModel.Win32Exception@-2147467259
(01) 2014-04-10 11:51:44 Slp: Parameter 5 : RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:44 Slp: Parameter 8 : 1300
(01) 2014-04-10 11:51:44 Slp:
Final Parameter Values
(01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server
2012@RTM@KB2931078
(01) 2014-04-10 11:51:44 Slp: Parameter 1 : 0x6785B09D
(01) 2014-04-10 11:51:44 Slp: Parameter 2 : 0xB2652E58
(01) 2014-04-10 11:51:44 Slp: Parameter 3 : 0x74E34741
(01) 2014-04-10 11:51:44 Slp: Parameter 4 : 0xDC80C325
(01) 2014-04-10 11:51:44 Slp: Parameter 5 : RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:44 Slp: Parameter 8 : 0xA05EFA62
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Microsoft SQL
Server.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Uninstall to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft
SQL Server.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Uninstall to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:46 Slp: Failed to retrieve data for this request.
(01) 2014-04-10 11:51:46 Slp: Watson bucket for exception based failure has been created
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\110
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to get registry value EnableErrorReporting
(01) 2014-04-10 11:51:46 Slp: WER: Successfully read app consent from registry Software\Microsoft\Microsoft SQL Server\110\EnableErrorReporting=0.
(01) 2014-04-10 11:51:46 Slp: WER: Application level consent value '0' was mapped to consent status 'WerConsentDenied'
(01) 2014-04-10 11:51:46 Slp: WER: Result of the submission:: 'WerDisabled'
(01) 2014-04-10 11:51:46 Slp: WER: Submitted 1 of 1 failures to the Watson data repository
(01) 2014-04-10 11:51:46 Slp: Sco: File 'C:\Windows\system32\Cluster.exe' does not exist
(01) 2014-04-10 11:51:46 Slp: Failed to collect cluster logs, cannot find Cluster.exe under system directory.
(01) 2014-04-10 11:51:46 Slp: Dumping final cluster state.
(01) 2014-04-10 11:51:49 Slp: Completed dumping final cluster state.
(01) 2014-04-10 11:51:51 Slp:
(01) 2014-04-10 11:51:51 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:51 Slp:
(01) 2014-04-10 11:51:51 Slp: Error result: -2146233088
(01) 2014-04-10 11:51:51 Slp: Result facility code: 19
(01) 2014-04-10 11:51:51 Slp: Result error code: 5376
(01) 2014-04-10 11:51:51 Slp: SQM Service: Sqm does not have active session.Hello SQL Ranger,
Thanks for posting the detailed log. I dont have exact solution for this but I can give you some hint what could be reason patch has failed below message points to fact that there is some issue with account which is used to install CU patch.Have alook at
below log.It says that when patch was trying to get details from other node in cluster it was not able to.
01) 2014-04-10 11:51:33 Slp: Discovery on local machine is complete
(01) 2014-04-10 11:51:33 Slp: Running discovery on remote machine: VMSPDB1
(01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are assigned to the caller.
IMO I strongly feel it is issue with the account. Microsoft has also documented about this for SQL Server 2008 .Have a look at following links
http://support.microsoft.com/default.aspx?scid=kb;en-US;2000257
Please also assign privilege mentioned in below link
http://www.bradg.co.za/?p=12
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
I have unique service accounts set up for multiple instances on the same SQL Server 2012.
When step 3 of the inbuilt syspolicy_purge_history job(Erase Phantom System Health Records) runs, it appears to attempt to run against every instance on the server despite being passed the instance path!
The SQLServer's powershell script call:
if ('$(ESCAPE_SQUOTE(INST))' -eq 'MSSQLSERVER') {$a = '\DEFAULT'} ELSE {$a = ''};
(Get-Item SQLSERVER:\SQLPolicy\$(ESCAPE_NONE(SRVR))$a).EraseSystemHealthPhantomRecords()
so with instances SERVER\X this runs as...
(Get-Item SQLSERVER:\SQLPolicy\SERVER\X).EraseSystemHealthPhantomRecords()
SERVER\X's job will run and I will see login failures in the error logs of SERVER\Y and SERVER\Z for the service account set up for instance X.
It seems Microsoft's only 'accepted solution' to this problem is for me to compromise my security by escalating the access of these service accounts?
Has anyone else run into and corrected this failure?Hi Atombath,
When you install multiple instances on one Server, and the SQL Server’s powershell scripts are the same in inbuilt syspolicy_purge_history job steps. However, when you start PowerShell by right clicking
syspolicy_purge_history job, you will find it will point to their own instance. I do a test in my SQL Server 2012,
it will not across instance to collect the error logs. So I recommend you use its original powershell scripts for the syspolicy_purge_history job.
Sometimes, if you run the syspolicy_purge_history job on a clustered instance, the syspolicy_purge_history SQL Server Agent job may fail due to using the computer node name instead of the virtual server name. For more information, see:
http://support.microsoft.com/kb/955726/en-us
In addition, you can use different service account for your multiple SQL Server instances on the same Server. And make sure the accounts that you created get added to the sysadmin fixed server role, the accounts are also set in the three Agent roles (SqlAgentUserRole,
SqlAgentReaderRole, and SqlAgentOperatorRole).
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
SQL Server 2012 Express error 9002 while restoring a backup from 2008
Hi all,
I have installed SQL Server 2012 Express on my laptop operating with win 8. Then I took the backup in my old laptop with SQL Server 2008R Express / Windows 7 and tried to restore it to the new one.
After it restored it produced an error messaging saying that restore failed. The error code was 9002 and it says due to NOTHING. I checked the log file it is a file of 1024 kb size, not big. When I installed the SQL 2012 I disabled the autogrowth of the
log file (exactly same setting as I had with 2008) The log is not big. I tried to further shrink, no change.
Moreover the db is already there with full records, I can manipulate it. Even take a back w/o problems. What is this issue? Is it resolved?
thanksan error messaging saying that restore failed. The error code was 9002
and it says due to NOTHING. I
select *
from sys.messages
where message_id = 9002
=> "The transaction log for database '%ls' is full due to '%ls'. "
Is your disk may low on free space?
Olaf Helper
[ Blog] [ Xing] [ MVP] -
SQL Server 2012 Install Failure
I am attempting to install SQL Server 2012 Developer Edition with SP1 as a standalone installation. This is the downloaded version. en_sql_server_2012_developer_edition_with_sp1_x64_dvd_1228540
Here is my environment. Windows 7 X64, SQL Server 2008 R2 Developer Edition,
I've tried to bypass the update step by executing as: "setup.exe /ACTION=Install /UpdateEnabled=False". While this did eliminate the two KB downloads, the same error still occurred.
I've extracted the ISO to my local machine and attempted the install according to another thread. Still no joy.
I installed a hotfix recommended by another thread but still no joy. System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [August 2013]
The Error occurrs in pop-up during Product Updates.
2 updates found
SQL Server 2012 SP1 GDR Product Update 145MB KB2793634
SQL Server 2012 SP1 GDR Setup Update 26MB KB2793634
ERRORS
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
An error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32-policy"'. Please refer to Help
and Support for more information. HRESULT: 0x800736B3.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xDF039760%25401201%25401
BUTTONS:
OK
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
SQL Server Setup has encountered an error when running a Windows Installer file.
Windows Installer error message: An error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32-policy"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
Windows Installer file: C:\Users\jhadden\AppData\Local\Temp\SQL Server 2012\Setup\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi
Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131010_091212\SqlSupport_Cpu64_1_ComponentUpdate.log
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xDC80C325
BUTTONS:
&Retry
CancelHello,
Did you install Windows 7 update SP1? If not, please install the SP1 update first.
What's more, you try to install SQL Server 2012 SP1 together with SP1 Cumulative update (KB2793634)by enable the "UpdateEnabled" and specify the update feature in "UPDATESOURCE".
You can refer to Ahmed's blog for more details steps:
http://blogs.msdn.com/b/ai/archive/2013/01/14/installing-sql-server-2012-service-pack-1-sp1-cumulative-update-in-one-installation-using-sql-server-2012-product-update.aspx
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Rule "SQL Server 2012 feature Upgrade" Failed
I am doing an in-place upgrade of SQL Server 2008 R2 SP2 > SQL Server 2012 SP1, both 64-bit, installed on Windows Server 2008 R2.
I ran the SQL Server Upgrade Advisor tool prior to upgrade which reported no issues.
The error I am getting is:
In the detailed.txt log I can see the following:
(11) 2013-12-29 12:28:10 Slp: Initializing rule : SQL Server 2012 Feature Upgrade
(11) 2013-12-29 12:28:10 Slp: Rule is will be executed : True
(11) 2013-12-29 12:28:10 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.SkuUpgradeRule
(11) 2013-12-29 12:28:10 Slp: -- SkuUpgradeRule : Rule 'FeatureUpgradeMatrixCheck' looking for previous version upgrade data for feature package 'sql_as_Cpu64'.
(11) 2013-12-29 12:28:10 Slp: -- SkuUpgradeRule : Found feature package 'sql_as_ctp6_Cpu64' with SkuValue=ENTERPRISE (Enterprise) ProductVersion=10.52.4000.0
(11) 2013-12-29 12:28:10 Slp: -- SkuUpgradeRule : Rule 'FeatureUpgradeMatrixCheck' found sourceVersion 10.0 and edition ENTERPRISE for feature package 'sql_as_Cpu64'.
(11) 2013-12-29 12:28:10 Slp: -- SkuPublicConfigObject : ValidateSkuMatrix checking sku matrix for sourceVersion=10.0 sourceEdition=ENTERPRISE (Enterprise) sourceArchitecture=X64 targetEdition=STANDARD (Standard) targetArchitecture=X64
(11) 2013-12-29 12:28:10 Slp: -- SkuPublicConfigObject : ValidateSkuMatrix source and target architecture match.
(11) 2013-12-29 12:28:10 Slp: -- SkuPublicConfigObject : ValidateSkuMatrix did not find a match in sku matrix .
(11) 2013-12-29 12:28:10 Slp: -- SkuUpgradeRule : Rule 'FeatureUpgradeMatrixCheck' feature package 'sql_as_Cpu64' is blocking upgrade.
(11) 2013-12-29 12:28:10 Slp: -- SkuUpgradeRule : Rule 'FeatureUpgradeMatrixCheck' detection result: IsValidFeatureUpgrade=False
(11) 2013-12-29 12:28:10 Slp: Evaluating rule : FeatureUpgradeMatrixCheck
(11) 2013-12-29 12:28:10 Slp: Rule running on machine: TAUPE-SERVER
(11) 2013-12-29 12:28:10 Slp: Rule evaluation done : Failed
(11) 2013-12-29 12:28:10 Slp: Rule evaluation message: The specified edition upgrade is not supported. For information about supported upgrade paths, see the SQL Server 2012 version and edition upgrade in Books Online.
(11) 2013-12-29 12:28:10 Slp: Send result to channel : RulesEngineNotificationChannel
Prior to upgrade:
From Summary.txt file:
Overall summary:
Final result: Passed
Exit code (Decimal): 0
Start time: 2013-12-29 12:04:28
End time: 2013-12-29 12:08:02
Requested action: RunRules
Machine Properties:
Machine name: TAUPE-SERVER
Machine processor count: 1
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Database Engine Services
1033 Enterprise Edition 10.52.4000.0 No
SQL Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 10.52.4000.0 No
SQL Server 2008 R2 MSSQLSERVER MSAS10_50.MSSQLSERVER Analysis Services
1033 Enterprise Edition 10.52.4000.0 No
SQL Server 2008 R2 MSSQLSERVER MSRS10_50.MSSQLSERVER Reporting Services - Native
1033 Enterprise Edition 10.52.4000.0 No
SQL Server 2008 R2
Management Tools - Basic 1033 Enterprise Edition 10.52.4000.0
No
SQL Server 2008 R2
Management Tools - Complete 1033 Enterprise Edition 10.52.4000.0
No
SQL Server 2008 R2
Client Tools Connectivity 1033 Enterprise Edition 10.52.4000.0
No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location:
\\dovekie\drop\TFS2013\SQLServer2012SP1\x64\setup\
Installation edition: Standard
Slipstream: True
User Input Settings:
ACTION: RunRules
CONFIGURATIONFILE:
ENU: true
FEATURES:
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTANCENAME: <empty>
PID: *****
QUIET: false
QUIETSIMPLE: false
RULES: GlobalRules
UIMODE: Normal
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131229_120425\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131229_120425\SystemConfigurationCheck_Report.htm
As far as I'm aware, the upgrade path I am following is a supported one, any suggestions will be much appreciated!
Thank you.Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Database Engine Services
1033 Enterprise Edition 10.52.4000.0 No
SQL Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 10.52.4000.0 No
SQL Server 2008 R2 MSSQLSERVER MSAS10_50.MSSQLSERVER Analysis Services
1033 Enterprise Edition 10.52.4000.0 No
SQL Server 2008 R2 MSSQLSERVER MSRS10_50.MSSQLSERVER Reporting Services - Native
1033 Enterprise Edition 10.52.4000.0 No
SQL Server 2008 R2
Management Tools - Basic 1033 Enterprise Edition 10.52.4000.0
No
SQL Server 2008 R2
Management Tools - Complete 1033 Enterprise Edition 10.52.4000.0
No
SQL Server 2008 R2
Client Tools Connectivity 1033 Enterprise Edition 10.52.4000.0
No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location:
\\dovekie\drop\TFS2013\SQLServer2012SP1\x64\setup\
Installation edition: Standard
Slipstream: True
User Input
Hello ,
You are trying to upgrade to SQL 2012 standard edition which is not supported .you can only upgrade from SQL server 2008 R2 Sp2 Enterprise edition to SQL 2012 Enterprise or business intellgience. see below link for supported upgrade paths
http://technet.microsoft.com/en-us/library/ms143393.aspx
If you want to move ahead you should try Side by side approach.Create new SQL server 2012 box and restore backup.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
SQL Server 2012 DB Engine does not start (clean install with server 2012 and 2008 R2)
I'm trying to do clean installation of SQL server 2012 on Server 2012 (which is runnning as a VM on ESX server) and getting this "wait on the DB engine recovery failed" message. Initially, I though this issue was related to some permission issues
but changing the permission or service accounts didn't help. I'm not seeing any "denied" messages in the log files either. Even with Server 2008 R2 (clean built VM), the installation gives the exactly the same error messages.
My setup is purely for test purpose; so, the security is not a concern. Can someone help or give me a clue where to look?
(Summary)
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-28 17:12:12
End time: 2014-05-28 17:19:47
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: WIN-1V3VKPV5Q19
Machine processor count: 1
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: E:\x64\setup\
Installation edition: Evaluation
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x64
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x64
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$TESTDB
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: TESTDB
INSTANCENAME: TESTDB
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$TESTDB
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: WIN-1V3VKPV5Q19\Administrator
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\SystemConfigurationCheck_Report.htm
(Error Log)
2014-05-28 17:17:26.64 spid8s 0 transactions rolled back in database 'msdb' (4:0). This is an informational message only. No user action is required.
2014-05-28 17:17:26.73 spid9s Starting up database 'model'.
2014-05-28 17:17:28.24 spid9s Error: 9004, Severity: 23, State: 6.
2014-05-28 17:17:28.24 spid9s An error occurred while processing the log for database 'model'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
2014-05-28 17:17:28.24 spid9s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
(Details)
(01) 2014-05-28 17:17:28 Slp: Exception type: Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException
(01) 2014-05-28 17:17:28 Slp: Message:
(01) 2014-05-28 17:17:28 Slp: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
(01) 2014-05-28 17:17:28 Slp: HResult : 0x851a001a
(01) 2014-05-28 17:17:28 Slp: FacilityCode : 1306 (51a)
(01) 2014-05-28 17:17:28 Slp: ErrorCode : 26 (001a)
(01) 2014-05-28 17:17:28 Slp: Data:
(01) 2014-05-28 17:17:28 Slp: SQL.Setup.FailureCategory = ConfigurationFailure
(01) 2014-05-28 17:17:28 Slp: WatsonConfigActionData = INSTALL@CONFIGRC@SQL_ENGINE_CORE_INST
(01) 2014-05-28 17:17:28 Slp: WatsonExceptionFeatureIdsActionData = System.String[]
(01) 2014-05-28 17:17:28 Slp: Stack:
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart(Process processSql)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceSCM.StartSqlServer(String[] parameters)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig.ConfigSQLServerSystemDatabases(EffectiveProperties properties, Boolean isConfiguringTemplateDBs, Boolean useInstallInputs)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig.DoCommonDBStartConfig(ConfigActionTiming timing)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.ExecuteAction(String actionId)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.Execute(String actionId, TextWriter errorStream)
(01) 2014-05-28 17:17:28 Slp: Watson Bucket 1
Original Parameter Values
(01) 2014-05-28 17:17:28 Slp: Parameter 0 : SQL Server 2012@RTM@
(01) 2014-05-28 17:17:28 Slp: Parameter 1 : Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart
(01) 2014-05-28 17:17:28 Slp: Parameter 2 : Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart
(01) 2014-05-28 17:17:28 Slp: Parameter 3 : Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 4 : Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
(01) 2014-05-28 17:17:28 Slp: Parameter 6 : INSTALL@CONFIGRC@SQL_ENGINE_CORE_INST
(01) 2014-05-28 17:17:28 Slp:
Final Parameter Values
(01) 2014-05-28 17:17:28 Slp: Parameter 0 : SQL Server 2012@RTM@
(01) 2014-05-28 17:17:28 Slp: Parameter 1 : 0xD15B4EB2
(01) 2014-05-28 17:17:28 Slp: Parameter 2 : 0xD15B4EB2
(01) 2014-05-28 17:17:28 Slp: Parameter 3 : 0x4BDAF9BA@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 4 : 0x4BDAF9BA@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
(01) 2014-05-28 17:17:28 Slp: Parameter 6 : 0x9C5770A6Hi Nababoya:
As you are telling this is a test installation process...
In the logs i m seeing the error message "An error occurred while processing the log for database 'model'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.".
1) If the SQL Services was installed successfully and SQL Service was not able to start because of model database issue...
1.1) If you have model database SQL back file, start the SQL Server in single user mode with minimum configuration and try to restore MODEL database
http://blogs.msdn.com/b/sqlserverfaq/archive/2011/05/11/inf-hey-my-sql-server-service-is-not-starting-what-do-i-do.aspx
1.2) If you don't have backups., try to rebuild the system databases but make sure that you are not losing any data critical data on master and SQL Jobs on MSDB
http://msdn.microsoft.com/en-us/library/dd207003%28v=sql.110%29.aspx#RebuildProcedure
2) As if this is a new installation try to repair the instance with the help of setup media file
3) If the repair option fails., the last option wipe out the complete SQL Server components from Services.msc and Registries and start new installation.
4) Make sure when you are doing un-installation all the required SQL Server components on services.msc should be in stop state.
Hope this helps and let me know any questions...
Thanks,
Thanks, Satish Kumar. Please mark as this post as answered if my anser helps you to resolves your issue :) -
Error in sql_engine_core_inst_Cpu64_1.log file for SQL Server 2012
I was running SQL Server 2012 in Win 7 64 bit OS. Some how I found SQLSERVER server is not running and I was not able to run the service. Then I tried to unisntall and install again. And I found that some of the SQL Server
features got failed, like: Reporting Services - Native, Database Engine Services, Data Quality Services, Full-Text and Semantic Extractions for Search and SQL Server Replication. I checked the Summary.txt
file from location C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log. It thsi logs referes to another log file location like:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 1639
Component log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140127_151409\sql_engine_core_inst_Cpu64_1.log
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=sql_engine_core_inst.msi%400x162A16FE%400x1639
I did unisntall/install multipel times. But fhw to fix the issue that saying in sql_engine_core_inst_Cpu64_1.log file.:
=== Verbose logging started: 1/27/2014 15:45:04 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\SQLServer2012\x64\ScenarioEngine.exe ===
MSI (c) (C4:BC) [15:45:04:321]: Resetting cached policy values
MSI (c) (C4:BC) [15:45:04:321]: Machine policy value 'Debug' is 0
MSI (c) (C4:BC) [15:45:04:321]: ******* RunEngine:
******* Product: E:\Software\SQL Full Installation\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
******* Action:
******* CommandLine: **********
MSI (c) (C4:BC) [15:45:04:322]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (C4:BC) [15:45:04:322]: Grabbed execution mutex.
MSI (c) (C4:BC) [15:45:04:323]: Cloaking enabled.
MSI (c) (C4:BC) [15:45:04:323]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (C4:BC) [15:45:04:323]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (38:8C) [15:45:04:327]: Running installation inside multi-package transaction E:\Software\SQL Full Installation\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
MSI (s) (38:8C) [15:45:04:327]: Grabbed execution mutex.
MSI (s) (38:A0) [15:45:04:327]: Resetting cached policy values
MSI (s) (38:A0) [15:45:04:327]: Machine policy value 'Debug' is 0
MSI (s) (38:A0) [15:45:04:327]: ******* RunEngine:
******* Product: E:\Software\SQL Full Installation\x64\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi
******* Action:
******* CommandLine: **********
MSI (s) (38:A0) [15:45:04:452]: Machine policy value 'TransformsSecure' is 0
MSI (s) (38:A0) [15:45:04:452]: User policy value 'TransformsAtSource' is 0
MSI (s) (38:A0) [15:45:04:475]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (38:A0) [15:45:04:475]: Specified instance {18B2A97C-92C3-4AC7-BE72-F823E0BC895B} via transform :InstID01.mst;:InstName02.mst is already installed. MSINEWINSTANCE requires a new instance that is not installed.
MSI (s) (38:A0) [15:45:04:475]: MainEngineThread is returning 1639
MSI (s) (38:8C) [15:45:04:477]: User policy value 'DisableRollback' is 0
MSI (s) (38:8C) [15:45:04:477]: Machine policy value 'DisableRollback' is 0
MSI (s) (38:8C) [15:45:04:477]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (38:8C) [15:45:04:478]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (38:8C) [15:45:04:478]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (38:8C) [15:45:04:478]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (38:8C) [15:45:04:478]: Restoring environment variables
MSI (c) (C4:BC) [15:45:04:481]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (C4:BC) [15:45:04:481]: MainEngineThread is returning 1639
=== Verbose logging stopped: 1/27/2014 15:45:04 ===
Please advice. I searched many places and did not get actual solution that will resolve my case.
Nusrat AkhterHi Nusrat Akhter,
According to your description, when installing the first install failed, and it looks like the instance did not uninstall completely. To solve the issue I recommend you changed the instance name in re-installing SQL Server, and check if it can work fine.
There is a similar issue that the SQL engine will not start, and there is no method of uninstalling either it, or any of the components etc. You can review the following post.
https://connect.microsoft.com/SQLServer/feedback/details/710892/sql-server-2012-rc0-install-fails-citing-invalid-drivers
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support -
Unable to install SQL server 2012 on windows 7 64bit
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2057043966
Exit facility code: 1380
Exit error code: 2
Exit message: There was a failure to calculate the applicability of setting ALLINSTANCES.
Start time: 2015-03-17 21:43:13
End time: 2015-03-17 21:43:34
Requested action: LandingPage
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x4F2D2386%400xE9BC3D64&EvtType=0x4F2D2386%400xE9BC3D64
Machine Properties:
Machine name: ELKR-1214-1745
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: c:\afaeb7739e47ceedb4b5f79a1e14a784\x64\setup\
Installation edition:
User Input Settings:
ACTION: LandingPage
CONFIGURATIONFILE:
ENU: true
HELP: false
INDICATEPROGRESS: false
QUIET: false
QUIETSIMPLE: false
UIMODE: AutoAdvance
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150317_214254\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingApplicabilityException
Message:
There was a failure to calculate the applicability of setting ALLINSTANCES.
HResult : 0x85640002
FacilityCode : 1380 (564)
ErrorCode : 2 (0002)
Data:
SettingId = ALLINSTANCES
WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingApplicabilityException@2
HelpLink.EvtType = 0x4F2D2386@0xE9BC3D64
DisableWatson = true
Stack:
at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateApplicability()
at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.CalculateAllSettings(Boolean chainerSettingOnly)
at Microsoft.SqlServer.Configuration.SetupExtension.FinalCalculateSettingsAction.ExecuteAction(String actionId)
at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
Inner exception type: Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingChangeabilityException
Message:
There was a failure to calculate the changeability of setting ALLINSTANCES.
HResult : 0x85640003
FacilityCode : 1380 (564)
ErrorCode : 3 (0003)
Data:
SettingId = ALLINSTANCES
WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.CalculateSettingChangeabilityException@3
Stack:
at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateChangeabilityByUser()
at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.CallQueuedSubscriberDelegates()
at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.Publish(Publisher publisher)
at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateApplicability()
Inner exception type: Microsoft.SqlServer.Chainer.Infrastructure.UnableRetrieveConfigObjectForSettingException
Message:
Unable to retrieve a public configuration object type Microsoft.SqlServer.Configuration.SetupExtension.SlpInputSettings for setting ALLINSTANCES.
HResult : 0x85640007
FacilityCode : 1380 (564)
ErrorCode : 7 (0007)
Data:
SettingId = ALLINSTANCES
ConfigObjectType = Microsoft.SqlServer.Configuration.SetupExtension.SlpInputSettings
WatsonData = Microsoft.SqlServer.Chainer.Infrastructure.UnableRetrieveConfigObjectForSettingException@7
Stack:
at Microsoft.SqlServer.Chainer.Infrastructure.SettingBridge.GetHostingObject()
at Microsoft.SqlServer.Chainer.Infrastructure.SettingBridge.ChangeabilityByUser()
at Microsoft.SqlServer.Deployment.PrioritizedPublishing.PublishingQueue.CallFunctionWhileAutosubscribing[T](SubscriberDelegate subscriberDelegate, Int32 priority, AutosubscribingFunctionDelegate`1 function)
at Microsoft.SqlServer.Chainer.Infrastructure.Setting.CalculateChangeabilityByUser()
Inner exception type: Microsoft.SqlServer.Chainer.Infrastructure.ChainerInfrastructureException
Message:
Unable to generate a temporary class (result=1).
error CS0009: Metadata file 'c:\Windows\assembly\GAC_MSIL\System\2.0.0.0__b77a5c561934e089\System.dll' could not be opened -- 'File is corrupt'
HResult : 0x84b10001
FacilityCode : 1201 (4b1)
ErrorCode : 1 (0001)
Stack:
at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.DeserializeObject(String rootPath, Type type, String elementXPath)
at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.DeserializeObject(String rootPath, Type type)
at Microsoft.SqlServer.Chainer.Infrastructure.SettingBridge.GetHostingObject()
Inner exception type: System.InvalidOperationException
Message:
Unable to generate a temporary class (result=1).
error CS0009: Metadata file 'c:\Windows\assembly\GAC_MSIL\System\2.0.0.0__b77a5c561934e089\System.dll' could not be opened -- 'File is corrupt'
Stack:
at System.Xml.Serialization.Compiler.Compile(Assembly parent, String ns, XmlSerializerCompilerParameters xmlParameters, Evidence evidence)
at System.Xml.Serialization.TempAssembly.GenerateAssembly(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, Evidence evidence, XmlSerializerCompilerParameters parameters, Assembly assembly, Hashtable assemblies)
at System.Xml.Serialization.TempAssembly..ctor(XmlMapping[] xmlMappings, Type[] types, String defaultNamespace, String location, Evidence evidence)
at System.Xml.Serialization.XmlSerializer.GenerateTempAssembly(XmlMapping xmlMapping, Type type, String defaultNamespace)
at System.Xml.Serialization.XmlSerializer..ctor(Type type, String defaultNamespace)
at Microsoft.SqlServer.Chainer.Infrastructure.DataStoreService.DeserializeObject(String rootPath, Type type, String elementXPath)Hi,
I would like to add that if you see summary.txt file you would see
Message:
Unable to generate a temporary class (result=1).
error CS0009: Metadata file 'c:\Windows\assembly\GAC_MSIL\System\2.0.0.0__b77a5c561934e089\System.dll' could not be opened -- 'File is corrupt'
HResult : 0x84b10001
FacilityCode : 1201 (4b1)
ErrorCode : 1 (0001)
You can see file is corrupt. So either you have to download the setup file again or there can be chance that Antivirus caused some issue.
Plus if you see starting of summary.txt you could see
Requested action: LandingPage
The error message came while landing page was being loaded/or was in action so again I think it is some thing related to corrupt media or antivirus.
Please
1. Download ISO file again and extract using WINRAR, don't use Winzip
2. Disable Antivirus.
3. Make a new folder and extract installable there.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
Unable to upgrade SQL Server 2008 R2 to SQL Server 2012 SP1
I'm encountering error after error, after successfully installing the upgrade advisor (which took some doing) and running it with essentially no warnings/errors (the one warning was on the connection strings, as I recall -- and all of the warnings had a
"fix after" status.
First failure involved SSRS and the inability to create the "managed account". Backed out the upgrade using http://sqldbanotes.blogspot.com/2013/10/how-to-fix-failed-in-place.html
Now the failure involves SSAS and unable to connect to analysis services with name MSSQLServerOLAPService. That is the logical name for the service, although it shows up as just MSSQLServer when looking at it in the services list. I tried
setting the service account to a local account as well as to Local System -- did not make a difference, the upgrade couldn't apparently find it regardless.
Has anybody successfully done an in place upgrade from SQL Server 2008 R2 to SQL Server 2012?Hi Bob，
Thanks for your post and I am glad to hear that the issue is resolved. Thanks for you posting a reply to share your solution and I had marked it as answer. That way, other community members could benefit from your sharing.
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support
Maybe you are looking for
-
I need to change my e-mail address in the app store, how does that work??
-
Logical column for sum number of occurences
Hi, In Discoverer I have a column: "Number of Employees" and it is the expression like this: DECODE(Polisaid,Polisaid,1). I tried the same in OBI repository: CASE WHEN "Number of Employees" IS NOT NULL THEN 1 END. In query, How much employees are in
-
I cannot activate the iMessage in my iPad
I cannot activate the iMessage, I get "your password or user id is incorrect" .. I enter the correct apple id and password .. I need help to active the iMessage ..
-
Ext HD Not SNot Listed as a Device in Finder
Hi, Running os 10.5.8 I start up from my internal hd on my PM G5. Not sure what is causing this, but I have an external HD connected by FW to my G5 and it shows up on the desktop, I can click on the dt icon and access it, I can read/write to it but i
-
SQL statement - tricky search problem
Hi, I am working in asp and use an Access db. I have a database with 500 shops around the world, the table contains among other things shop name, country and region (Europe, Asia etc). Then a search page with dropdown lists, one for Region and one fo