Restore (file already exists)

Hello
1-)Why does restore fail in below scenerio?
2-)'C:\TEST.DBF' datafile is not in my backupset,Why oracle attempts to restore it?
rman target /
Recovery Manager: Release 10.2.0.1.0 - Production on Sun Jul 26 12:29:42 2009
Copyright (c) 1982, 2005, Oracle.  All rights reserved.
connected to target database: XE (DBID=2563855341)
RMAN> backup database;
Starting backup at 26-JUL-09
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=38 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00003 name=C:\ORACLEXE\ORADATA\XE\SYSAUX.DBF
input datafile fno=00001 name=C:\ORACLEXE\ORADATA\XE\SYSTEM.DBF
input datafile fno=00002 name=C:\ORACLEXE\ORADATA\XE\UNDO.DBF
input datafile fno=00004 name=C:\ORACLEXE\ORADATA\XE\TEST1.DBF
input datafile fno=00005 name=C:\ORACLEXE\ORADATA\XE\TEST2.DBF
input datafile fno=00006 name=C:\ORACLEXE\ORADATA\XE\TUNTEMP.DBF
channel ORA_DISK_1: starting piece 1 at 26-JUL-09
channel ORA_DISK_1: finished piece 1 at 26-JUL-09
piece handle=C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\BACKUPSET\2009_07_26\O1_MF_NNNDF_TAG20090
726T122957_56R8JRNJ_.BKP tag=TAG20090726T122957 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:02:18
Finished backup at 26-JUL-09
Starting Control File and SPFILE Autobackup at 26-JUL-09
piece handle=C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2009_07_26\O1_MF_S_693232337_5
6R8O2N0_.BKP comment=NONE
Finished Control File and SPFILE Autobackup at 26-JUL-09
C:\Documents and Settings> sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Jul 26 12:32:44 2009
Copyright (c) 1982, 2005, Oracle.  All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
[email protected]> create tablespace test datafile 'C:/test.dbf' size 3m;
Tablespace created.
[email protected]> shut immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
RMAN> restore database;
Starting restore at 26-JUL-09
using channel ORA_DISK_1
creating datafile fno=7 name=C:\TEST.DBF
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 07/26/2009 12:41:17
ORA-01119: error in creating database file 'C:\TEST.DBF'
ORA-27038: created file already exists
OSD-04010: <create> option specified, file already existsIf I restore old controlfile, it again gives the same error,old controlfile doesnt aware of the new tablespace, and this new datafile is not in my backupset. so why it gives this error?
RMAN> restore controlfile from autobackup;
Starting restore at 26-JUL-09
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=35 devtype=DISK
recovery area destination: C:\oraclexe\app\oracle\flash_recovery_area
database name (or database unique name) used for search: XE
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2009_
07_26\O1_MF_S_693234306_56RBLMM1_.BKP
channel ORA_DISK_1: control file restore from autobackup complete
output filename=C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
Finished restore at 26-JUL-09
RMAN> restore database;
RMAN-03002: failure of restore command at 07/26/2009 12:41:17
ORA-01119: error in creating database file 'C:\TEST.DBF'
ORA-27038: created file already exists
OSD-04010: <create> option specified, file already exists

Hi Bobo Dasilva,
What you showed according to your output is you created an autobackup without the info on the datafile called:
C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2009_07_26\O1_MF_S_693232337_56R8O2N0_.BKP
Than you created the tablespace which implictly created a new controlfile autobackup because you changed the structure of the database.
C:\ORACLEXE\APP\ORACLE\FLASH_RECOVERY_AREA\XE\AUTOBACKUP\2009_07_26\O1_MF_S_693234306_56RBLMM1_.BKP
This last controlfile autobackup is than used by the restore process which is the reason the controlfile is aware of the extra added datafile.
Best would be to to force the restore of the controlfile from O1_MF_S_693232337_56R8O2N0_.BKP if you want the controlfile not to contain the info.
Regards,
Tycho

Similar Messages

  • Adobe workbench errors on checkin:  Asset already exists / file already exists

    Adobe workbench for Myserver checkin gives errors:  "Could not create the asset because the asset already exists" and/or "File already exists in global store with that name".  How does one fix this? 
    This seems to especially happen when I change login to workbench user/configuration/"mode" etc.

    If worst comes to worst:
    Save relevant directories in completely separate windows backup directory path.
    Remove all sub-folders from LC workbench (everything below the /1.0 leaf).
    Restore directories from backup path.
    This seems to ALWAYS work.

  • PSE 9 and 5 will not import - says the file already exists in the catalog !

    I've already wasted 2 days looking for answers to this. When someone buys this program, at least half of the price is paying for the database in the Organizer - yet even John Ellis himself, who seems to know more than anyone about it, has gone to Lightroom. This is bad coding!!!
    Upgraded from 5 to 9. If you read my previous posts, this took 2 days too, and phone help from a tech, because it would not install in my XP computer. It did upgrade the Organizer from 5, although many of the symbols are unusable and don't work to help me identify my tags. However, now I see that neither 5 nor 9 is able to look at a file and display thumbnails that are in it.
    I move files around a lot for my business. Any half-way good database should be able to find the missing files, and also add any new images. Say I have 10 images in file A, then add 2 more to make 12. It can't see the added images! Says can't import, the file already exists in the catalog.
    I tried: updating thumbnails, recover, repair, in both 5 and 9 - nothing works. to import the images that I can SEE in these folders! I read here  that it will not import files if the same name is somewhere else. That alone is a problem.  But I think it's more than that: even if the file used to be in another folder, folder B, it won't recognize that it's in folder A now!
    Since PSE9 uses sql db, shouldn't that be better than 5 and be able to do simple tasks like this?
    Any advice or similar experiences eagerly welcomed.

    Thank you for replying, dj paiqe.
    Do you mean the first little section that says photos may not be displaying? Yes, those just reveal hidden photos and are very basic. I did them.
    I guess we disagree about databases and what they are designed to do, or maybe I didn't explain this well.
    I did not move the images outside of the catalog: I move them to various folders, all already imported WITHIN the catalog, as I send them to various editors. (these are all drawings, not photos, and I do this professionally, so it needs to work).
    Folder A and Folder B and Folder C have already been imported into the catalog. So if I move 2 images from folder B into folder A, the Organizer is simply lost, says image already exists, and everything is totally screwed up, as the image is no longer in folder B, and it can't find it in folder A!!! The problem is, unless I memorize the image name, say Image 9, I can't tell it to reconnect, as there is no longer an image in front of me! So there are 2 images, without names, now nowhere to be found. Inefficient, to say the least.
    I've never tried Lightroom or Filemaker, but I cannot believe that they would lose data like this. I think it's the Folder coding that's not working in PSE, and I wanted this to work so badly!!!!!
    I am willing to do it the PSE way, since you now have captions, keywords, etc, and it is a very powerful database, when it works. I understand that one is supposed to move images within the Organizer, obviously. But now many images are disconnected. I could start all over importing, but is there any way to do that without losing tags and categories?

  • SharePoint Library - If I save file from Excel File Save As - then I always get "File already exists. Do you want to replace it?" - Upload works fine though.

    Hi there,
    In my SP 2010 document library - When I try to save an Excel file from File > Save As menu to the document library it always prompts me "File already exists. Do you want to replace it?" even though the file does not exist in that document library.
    To the same document library - if I upload a file then it accepts it all fine.
    Any clues why I cannot save files using File > Save As menu?
    Thanks.

    Hi,
    As I understand, the notification pops up when you save an excel file to SharePoint library, while when directly upload file to library, there is no wrong.
    Please confirm if the issue occurs to other machines.
    Please open Microsoft Office Upload Center on the issue machine, then click settings, clear cache via checking Delete files from the Office Document Cache when they are closed.
    http://office.microsoft.com/en-in/excel-help/office-document-cache-settings-HA010388664.aspx
    If the issue occurs to client, I’d recommend you also ask the question in Excel forum:
    http://social.technet.microsoft.com/Forums/office/en-US/home?forum=excel
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Weird CS4 error when saving eps files on a Mac: "...specified files already exist in the target location"

    Hi There,
    All 3 workstations in our studio are experiencing weird file behavior when re-saving eps files from Illustrator.
    Basically Illustrator creates a new file in addition to the original and adds a "-01.eps" onto the file name. If you re-save your original, Illustrator brings up a dialogue box that states:
    Some of the specified files already exist in the target location. The files marked below will be replaced:
    filename.eps
    filename-01.eps
    We've been deleting the "-01.eps" files each time but it's becoming tedious. The behaviour occurs when re-saving an eps file to a server or the desktop.
    All machines are new Quad-core MacPros running:
    - Leopard 10.5.8
    - Illustrator CS4 14.0.0
    We've checked for Illustrator updates from within Illustrator but we seem to be running the latest version.
    Is anyone else experiencing this behavior?
    Any help or pointers in the right direction would be much appreciated.
    Cheers
    Ben

    Thanks for the reply.
    The error occurs when we save the document but if we choose save as, "Use Artboards" seems to be unchecked so not sure if this issue is related or not. Will re-save the document using save as then see if the issue persists.
    Why do we still use eps?
    Basically because we've found it to be much more compatible. Our entire logo library is in eps format (18 years worth) partly because it was previously the only format to use and partly because it allows account managers to send logos to clients, printers, TV stations etc and not involve the studio (saving out an eps version).
    Although "Create PDF compatible file" is a good idea, we've encountered costly issues with colours and images - especially if the recipient is using old CS software, non-Adobe software or is using some kind of hardware RIP. We now just go with what we know works.
    But I do find saving eps versions of everything to be a bit painful. In fact, I've always found Illustrator in general to be a bit painful when compared with Photoshop or AfterEffects. Illustrator seems like it's been developed by a different company some times!
    Cheers, and thanks for the help.

  • Pop up saying File already exists when saving an excel file while running exe

    I have an excel file which I read and write in my application.
    When I run the application in development system, it works fine. However when I run the application as an exe and try to save the excel file, it says that 'The file already exists and Do you want to replace?'.
    Why does this question asked for exe?
    PFA my write excel VI
    Thanks in advance.
    Attachments:
    Write to Excel.vi ‏25 KB

    Hi Princess_swa,
    The problem may be that when you build an exe, it adds another folder called 'builds' into the filepath.
    A good way to fix this is to create a case structure, putting extra strip paths into your filepath if running an exe.
    I have attached a screenshot of my code doing exactly this for you to look at. The code creates a 'base path' which is then used to reference all of my file paths in my code - and therefore, they will always have the right number of strip paths when it is run. (Note: in my code I have 2 extra strip paths, due to where I've placed the folder, but one should be sufficient.)
    Also there is a 'Check if folder exists' VI which you can again link to a case structure, and change the filename if it already exists. Again, I have provided a screenshot of my code which does this.
    Hope this helps,
    Lou
    Attachments:
    runtime strip paths.png ‏9 KB
    check folder exists.png ‏5 KB

  • Share: File already exists. It doesn't: Won't Replace

    FCPX 10.0.9 OSX 10.7.5
    Never had any trouble exporting before. 
    Share---- Export File----- (select location as the 1tb HD)- fcpx says file already exists, do you want to replace?  Hit Replace, and it just cycles the same error, until cancelled.
    Does this on every single fcpx project, even those that worked fine before.
    Share--- E-mail  ----- fcpx immediatley throws a quicktime -50 error. 
    Share ------ Export File (select loction as the desktop or any other folder) ---- fcpx give the quicktime -50 error.
    I don't think I've changed anything. 
    All saving works fine on all other programs that I use.
    I am trying to save to the internal drive in my macbook pro
    disk utilty says the drive is fine.
    You got me....?

    I did that and got rid of some of the early frame errors.  i was able to export a section of clips, but then it would never export past frame 7065 no matter what clip was holding that place (at least that is what I think).  Even then it only worked with master file exports.
    I was wrong about this.  Don't use it if you are troubleshooting your problem with this thread.
    What was happening is that there was a black frame at the end of the clips that were throwing errors.  I had to check the errors on that frame.  I don't konw if they are dead frames or simply black frames, but all of them had those bad frames in the original clips themselves (and as a result in the timeline if I had inserted the WHOLE clip, or at least any subclip including that last bad frame).  The only position they were was at the end of the clip. 
    The solution was to find the offending frame in the timeline and then cut it out.  IN my case there were 5 of them.
    Note: that the title does not reflect the problem.  That problem was that it didn't like where I was saving (not specificing a directory, not sure why it was allowing me to choose the destination as my HD, and gave a less than helpful error on that). 

  • "file already exists in the destination" during application build

    I am trying to build an executable and have gotten the following error:
    The file already exists in the destination.
    C:\Program Files\National Instruments\LabVIEW 8.2\vi.lib\Sentech LV 82\Shared Library - Trigger SDK\StTrgApi.dll
    WHen I start the build I go to "Build Executable" then click "Build"
    The VI for the project I have open is the Startup VI and I do not list any Dynamic VIs or Support FIles.
    I am using Labview 8.2
    I installed a user library for a USB camera from Sentech wich I am using and it works fine in Labview 8.2
    When I try to do the build I get the error shown above. The file it is referencing is there along with the .lvlib file.
    I tried removing the file shown in the error message to see what would happen and I continue to get the same error even though the file is not there. I even restarted LV and still got the same error.
    I am new to the application builder (v7 ?) and have not been able to find any good tutorials. Does anyone have any ideas on this error or a good place to learn more about app builder.
    Thanks
    Keith

    I am new to the application builder (v7 ?) and have not been able to find any good tutorials. Does anyone have any ideas on this error or a good place to learn more about app builder.
    Thanks
    Keith
    Hi Keith,
    you can check this Link out for a tutorial on app builder.
    Regards,
    Denver 

  • Cannot create a file when that file already exists, but should overwrite

    Hi,
    I need the same file name which is at Sender side and when it reaches to Receiver directory without timestamp.
    for eg., Sender side : Yeswanth.txt
    and also receiver side   :  Yeswanth.txt
    but, here it should overwrite the existing file (because, the sender side file name is always constant) at receiver directory when the job schedules for each time.
    Processing parameters i has given on Receiver side:
    File Construction Mode  :  Create
    put file  : Use Temporary File
    and I enabled the Adapter Specific Message Attributes at Sender side and Receiver side.
    Error getting receiver side at communication channel :
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException:
    Yeswanth.txt: Cannot create a file when that file already exists. : com.sap.aii.adapter.file.ftp.FTPEx: 550
    Yeswanth.txt: Cannot create a file when that file already exists.
    Reward points for useful answers.
    Regards,
    Yeswanth.
    Edited by: YeswanthRaj Kumar on May 23, 2008 8:20 AM

    Hi Yeswanth
    Then you can try with a "Add Counter". This will create new file each time with the same name but a counter will be added to the file name at the end specifying the number of times it is created.
    You can also the specify the format to create the counter once select this option u can correspondingly fill the Format and step fields.
    Will this be fine.
    Regards
    Ashmi

  • Database Adapter Configuration Wizard "File already exists" error

    I'm uding JDeveloper 10.1.3.1 on an XP machine running Java 1.5.0_06 and having trouble editing SOAOrderBooking.bpel as part of the tutorial.
    The tutorial calls for me to drag a new Database Adapter onto the diagram, select the "soademo_ssn" database and, on page 3 of the wizard select "Perform an operation on a table" and have only "Select" checked.
    When I click "Perform an operation on a table", the 5 tickboxes enable and are checked but the mouse pointer remains as an hourglass. If I press "Next" without doing anything else, the Wizard title changes to "Select Table" but never draws its controls, aside from the "Back" etc buttons along the bottom and the decorative graphic to the left. If I do try unchecking boxes to have only "Select" selected, every check box state change generates the error "File already exists" and the path of the .mwp file whose name I specified earlier. The file does exist, but it didn't before I entered the wizard.
    I've tried with three different filenames, and with two different database connections- both of which check out fine when I do "Test connection" in their property pages from the Connection Navigator.
    If I delete the file after each check state change, I can stop the errors appearing after I untick each checkbox, but the wizard still hangs on pressing "Next" whether the file is there or not.
    Does anyone have any suggestions?

    I am facing the same issues.
    I want to pick the new files and retain the files after polling.
    Any idea on this would help me to solve this issue.
    Thanks in advance.

  • FTPEx: 550  : Cannot create a file when that file already exists.

    Hi experts,
    I am working on idoc to file scenario and PI 7.1. The idoc is split into 3 files.
    In sxmb_moni , the message is successful , but in rwb( Message montoring) i am geeting the fllowing  Error message.
    ' Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server '172.19.125.190:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /Storedata/Outbound/0000001802: Cannot create a file when that file already exists. '. For details, contact your FTP server vendor..'
    and this error message is not displayed for all the target files , some files are getting created succesfully.
    After some times , the file in error status , gets created automatically.
    What may be the reason.?
    Thanks in advance .
    Best Regards,
    Anil

    There seem to be already some files in your Target Directory with the same name as your new files (which the CC is trying to place) and the CC is not able to overwrite the existing files and hence the error...check this.
    Check: http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/69d7cfa4b633eae10000000a1553f6/content.htm
    14.      Select the File Construction Mode.
    u25CB       Create
    The file is created. The document received last is saved in each case.
    If you want the created file to be overwritten, select Overwrite Existing File. If you do not set the indicator, processing is stopped until the created file is processed.
    You can only set the indicator if you select Use Temporary File under Put File below.
    Regards,
    Abhishek.
    Edited by: abhishek salvi on Jul 28, 2009 6:59 PM

  • How to check if the file already exists in the client directory

    Hi all.
    I'm on devsuite 10g. I'm using webutil to download files from DB using webutil function db_to_client.
    What I need is to check if the file already exists in the client directory and if yes to display a message to ask the user if he wants to overwrite or no. How can I make this???
    Here is the code that I'm using to download the file.
    Thanks all for the collaboration.
    Fabrizio
    declare
    file_path varchar2(2000) := null;
    BEGIN
    /** I ask where saving the file on the client machine **/
    file_path:= webutil_file.file_selection_dialog
    (directory_name => null,
    file_name => :bin_docs.name,
    file_filter => '',
    title => 'Saving file',
    dialog_type => save_file, --save_file
    select_file => TRUE);
    /** I download the file from DB to client **/
    if webutil_file_transfer.DB_To_Client_With_Progress
    ( file_path ,
    'BIN_DOCS',
    'DOC' ,
    'doc_id = '||:bin_docs.doc_id,
    'Downloading file',
    ' '||:bin_docs.name) then
    msg_alert('Download del file avvenuto con successo','I',false);
    else
    msg_alert('Si è verificato il seguente errore in fase di download '||SQLERRM,'I',false);
    end if;
    end;

    How about something like the below:
    Note: I have a yes/no alert to asking if they want to over-write the existing file.
    DECLARE
    file_path VARCHAR2(2000) := null;
    over_write BOOLEAN := TRUE;
    BEGIN
    /** I ask where saving the file on the client machine **/
    file_path:= webutil_file.file_selection_dialog
    (directory_name => null,
    file_name => :bin_docs.name,
    file_filter => '',
    title => 'Saving file',
    dialog_type => save_file, --save_file
    select_file => TRUE);
    IF webutil.file_exists(file_path) THEN
    /** check a file by the same name exists in the selected directory **/
    IF show_alert('Ask_overright') != alert_button1 THEN
    /** If we say no then set over_write value to false **/
    over_write := FALSE;
    END IF;
    END IF;
    IF over_write THEN
    /** I download the file from DB to client **/
    IF webutil_file_transfer.DB_To_Client_With_Progress
    ( file_path ,
    'BIN_DOCS',
    'DOC' ,
    'doc_id = '||:bin_docs.doc_id,
    'Downloading file',
    ' '||:bin_docs.name) then
    msg_alert('Download del file avvenuto con successo','I',false);
    ELSE
    msg_alert('Si è verificato il seguente errore in fase di'
    ||' download '||SQLERRM,'I',false);
    END IF
    END IF;
    END;
    cheers
    Q

  • Cannot rename DC, "Cannot create a file when that file already exists."

    Hi,
    A long time ago we used a domain controller named jacob.mydomain.lan.  It was removed, possibly in a 'dirty' way, and now we cannot re-use that name for another domain controller.  In the meantime we have upgraded to Win 2012 domain controllers
    now, and when I enter this to rename:
    netdom computername ourdc.mydomain.lan /add:jacob.mydomain.lan
    I get the error:  "Unable to add jacob.mydomain.lan as an alternate name for the computer.  The error is:  Cannot create a file when that file already exists."
    If I enter: 
    netdom computername ourdc.mydomain.lan /remove:jacob.mydomain.lan
    I get: "The command completed successfully", but it still refuses to add jacob.mydomain.lan
    After each attempt to add a forward zone dns record 'jacob.ourdomain.lan' has been created.  I always erase this manually afterwards.
    What is the problem? How can I search to find the offending 'file' named 'jacob'?
    Thanks a lot for help on this.
    regards Tor

    Kevin,
    I suggest you wait 30 days instead of 3 days before you enthusiastically close threads. Some people might think you are being a jerk if you don't.
    "K_evin Zhu" wrote in message
    news:[email protected]...
    Hi,
    As this thread has been quiet for a while, we will mark it as �??Answered�?? as the information provided should be helpful. If you need further help, please feel free to reply this post directly so we will be notified to follow it up. You can also choose to
    unmark the answer as you wish.
    BTW, we�??d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems. Thanks for your understanding and efforts.
    Best Regards
    Kevin
    Tomás Mason

  • Group file already exists

    Can someone please explain what causes this error:
    OCA-30023: error fetching result set
    [POL-3253] group file already exists
    I am using Oracle Lite 8. I have created a view that returns all records from a table with the related data from other tables. Whenever I use this view in a query, adding a where clause with a date range, I get the above mentioned error. This only happens when the database is open in another application. If I use the view in a query without a where clause, it works fine, but I get more data than I want to view. The view is shown below.
    Thanks for any info.
    John Valentino
    create view EventViewEx
         (EventIndex,LogDate,Tool,ModuleId,Module,Type,Event,StrDesc1,StrDesc2,StrDesc3,StrDesc4,IntDesc1,FptDesc1,UserName) as
    select     Event.EventIndex,
         Event.EventDate,
         Tool.ShopOrder,
         Event.ModuleID,
         Module.ModuleName,
         Event.EventType,
         Names.Name,
         Event.EV_StrDesc1,
         Event.EV_StrDesc2,
         Event.EV_StrDesc3,
         Event.EV_StrDesc4,
         Event.EV_IntDesc1,
         Event.EV_FptDesc1,
         Users.UserName
    from     Event,
         Names,
         Module,
         Tool,
         Users
    where     Event.ToolIndex = Tool.ToolIndex
    and     Event.NameId = Names.NameId
    and     Event.ModuleId = Module.ModuleId
    and     Event.UserIndex = Users.UserIndex;

    Thanks John. We downloaded the omwb13100 zip file.
    Instead of using the default repository, I tried to log-in to a database on the local NT machine to recreate a new repository. Everything went fine afterwards.
    We're all set for now but it would be nice to find out what happened to the default repository. Thank you.

  • PSE 9 Scanner Issue- "File already exists"

    Probably a really basic question but PSE is rejecting the first two scans of every multi-scan (usually a 4 photo scan). Says "files already exist" but they don't. They are new images never scanned before. But it will accept the last two images scanned.
    I can't find a work-around and it's paralyzed my scanning of hundreds of pictures.  All media types are checked under View.
    Any ideas?
    Thanks much!.

    Hi Rick,
    I'm not sure I'll be much help.  Right up front I admit I've never scanned into PSE.
    Are you saying that if the ScanGear software divides the images, everything is OK in PSE?
    In other words, do you get the error only if you use PSE to divide the images?
    If #1 is false, the fact that the location of the "existing" file is in a temp directory (and not in your specified scan folder) suggests that there is a communication problem between the ScanGear software and PSE.  If #2 is true, then that's an internal PSE problem.
    If you leave PSE out of the picture, can you scan directly from ScanGear and tell it to place the divided images in your scan folder?
    Ken

Maybe you are looking for

  • Trouble keeping Server 10.4.8 Intel working with 2003 AD.

    I have been trying for a week to get a 10.4.8 MacPro server to stay bound to my 2003 AD network. Using Bombich's doc, items checked off as I go, I can get it to work briefly. Then within an hour suddenly the time zone is wrong and no clients can atta

  • I cant up;oad a photo on facebook

    hello when i try to edit my profile photo on facebook my firefox locks up and it says not responding then it shuts down cann someone help me

  • I want to wirte a widget in flash builder 4.5

    hi i want to write a widget in flash builder 4.5 actually am new to this so idont know how to write when i gone through the online doucments in that they mentioned select  mxml component then write in that but when i opend the mxml component file the

  • Do i need to close an i tunes account?

    about 6 months my ipod nano (4th gen) and my roommates lap top (a pc) got stolen. (different incidences around the same time) we sort of said "Cest' la' vi" to the whole thing.. but luckily i just got a handy new Macbook pro and a new ipod nano (4th

  • Is it possible to print from an apple device without a wifi network?

    Is it possible to print from an apple device without a wifi network?