Restore from Time machine on new 13" Macbook Pro 2.8 i7 after replacing with OWC SSD
I have new 13" Macbook pro with Apple 256SSD. I am replacing with OWC 480GB 6GB SSD because out of space. When I bought machine I used time machine to restore from backup of other macbook pro. I simply held a key on keyboard at startup (dont remember key?) and it appeard to boot from the cloud to a screen where i selected time machine. Will it work the same this time or because I am replacing hard drive i have to create the USB key thing to restore from time machine? ie does apple have the restore from cloud capability only from their own drives?
You should consider restoring or migrating first only data that you absolutely need and want on the SSD. Then restore selectively.
On the latter, and in general on the topic Time Machine, here is good advice.
Similar Messages
-
imported old computer via time machine into new 2012 macbook pro, but its still running ilife 09 instead of 11?
I am assuming you had iLife 09 on the old computer - when you moved everything over, that came along with it.
I also have older versions of iLife (on install disks) and just recently got a new 2012 Macbook Pro. I noticed that iMovie 11, iPhoto and Garageband (I think) are listed in my Mac App Store Purchases with a notation to "accept". So you might want to check MAS to see if the apps are sitting there.
Now, I have chosen not to accept them for now for two reasons: I have iLife 11 on a disk and prefer that rather than having it tied to MAS/Apple ID and as long as I have my disk version installed, I also still have iDVD which I use a lot. I'm not sure if "accepting" those three from MAS would wipe out my iLife 11 installs including iDVD (which would be unacceptable for me). So, since I already have the latest version, I've opted to ignore the "accept" and, in fact, will leave it like that - if I ever sell this machine, the buyer can then accept them if they want with their own Apple ID. So before accepting the apps (if they are listed in MAS), you might want to check to make sure that your iLife install isn't wiped out - that is, if you have iDVD and want to keep it. -
After restoring from Time Machine to new Hard drive, system will not boot
I replaced my hard drive on my Macbook (2008 model) with a larger drive. I then put in my Snow Leopard disk, and followed the steps to restore from Time Machine backup. a few hours later it said it was restored, but when trying to boot up, I just get a blue screen with an occasional flicker to the Leopard screen. I tried an earlier back up as well but with the same results. Any suggestions??
Same exact problem here just yesterday, folks.
Got a bigger hard drive on my MacBook Pro (15-inch Core 2 Duo) and installed it. Followed the restore procedures from Gizmodo (http://gizmodo.com/333319/the-secret-of-the-time-machine+assisted-hard-drive-swa p). Then got the blue screen immediately after the chimes.
I only managed to transfer my old disk content by using CarbonCopyCloner.
Having said that, your solution looks uselful, Portland Mac! :
Portland Mac wrote:
... But when I decided to try and just do a fresh install and work my way back through all my software, I started by installing Snow Leopard and suddenly it boots and everything from my Time Machine backup is there...
But I would not say the following:
Portland Mac wrote:
... On a new drive apparently you have to install Snow Leopard before you do a time machine restore.
Am I mistaken, or did you do a fresh install after restoring your TimeMachine backup?
In any case, I found an interesting Apple article that might confirm that there is a problem: [Mac OS X v10.6: Issues after restoring a Mac from a Time Machine backup made with a different Mac ("Restore System From Backup…")|http://support.apple.com/kb/TS3243]. Or is it a completely different thing?
And another discussion that might give some good advice: [http://discussions.apple.com/message.jspa?messageID=12578529#12578529]. Personally, I will now do as the man says: two backups, on two different external hard drives, using different apps, the other one being CarbonCopyCloner...
For info, and I don't know whether that matters, my backup disk had been full and some past content had been erased automatically by Time Machine. But I don't think this should have mattered... -
iPhoto6 on iMac running SL - after a full reistall of Snow Leopard, iphoto does not display thumbnails. I've restored the library from time machine, rebuilt the library from iPhoto and run through the rebuild thumbnails function with no success. The files are there, I just get a dotted outline instead of the thumbnails. Does anyone have any other ideas on how to restore the thumbnails?
Try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
My Daughter is currently upgrading her MacBook Pro to OS X Lion. During the upgrade the system rebooted and then stops at the OS X Utilites menu. I have installed this same upgrade on My MacBook Pro and the family iMAC without issue. Did the upgrade encounter a problem? The only options are to Restore from Time Machine Backup, Reinstall Mac OS X, Get help, or Disk Utility.
I'm not sure how recient the backup is on the TimeMachine for her system and she is concered that she may loose a lot of updates she has made to iTunes and iPhoto.
Please help.I have 8 GB of RAM, but would that even matter during install? Performance once installed and running sure, but I questiong whether the installer would demand that much more, or why it would affect mountain lion when restoring from a time machine backup.
-
Struggling to restore from Time Machine (2007 MacBook; Snow Leopard)
The hard drive failed on my 2007 MacBook. I had it replaced and the shop also installed Snow Leopard (this was what I was using prior to the fail).
I tried a restore from Time Machine and while a huge chunk of my new hard drive disappeared, I couldn't locate the files. I have since found them in the hidden /Volumes folder.
I have also learned that to do a full restore, I should have used my Snow Leopard install disk alongside the drive with Time Machine backups.
So...
1. Should I delete the restored file in the /Volumes folder and start again using the Snow Leopard install disk?
2. I want to upgrade to Lion (this is the furthest I can go with this MacBook). Can I do step 1 using a Lion install disk even though the Time Machine backup was created in Snow Leopard? (Confession: I'm not sure where my Snow Leopard disk is and I'm trying to avoid going through cupboards and boxes to find it)
3. is it laborious and risky to try to restore everything manually from the /Volumes folder? Where do I start if I decide on this route?
Thanks in advance for any advice.I would try recovering the files manually first. If the result is unsatisfactory, then I'd boot up using the Snow Leopard DVD, run Disk Utility/Repair disk, erase and reformat the drive, and then install Snow Leopard. Reboot normally, and use Setup Assistant to restore from Time Machine. Completely update to 10.6.8 and then consider if you want to upgrade to Lion. There are no Lion disks - it is a download.
10.6.8 Combo Updater -
Cannot restore from Time Machine or Reinstall - MacBook Pro Yosemite
Hi all,
I recently started using a new Mac (Macbook Pro 15" with Yosemite) about 2 weeks ago. Upon startup it asked whether I wanted to encrypt and I said yes. It then froze for about 30min with the spinny wheel. After the startup was finally complete I used it normally for the next two weeks but the FileVault encryption in Security & Privacy never completed. It was stuck on "encryption paused" and underneath said "Connect to power adapter to continue encryption". Nothing I did fixed the problem. I then did a Time Machine Backup onto a USB with plans to restore from Time Machine. The backup went successfully with no issues. I put the Mac into recovery mode (command+R) and did Restore from Time Machine Backup. It was able to find my Time Machine Backup on the USB, and in the next window "Select a Destination" it found my HD. I clicked restore and there was an immediate error saying that I should restart the computer and try again. From then on in "Select a Destination" it now says "No Time Machine backups were found." This is strange because I already selected the time machine backup and should be looking for a destination now, but regardless nothing can be found.
From there I went to Disk Utility and verified. There didn't appear to be anything wrong. I did repair disk and it didn't seem to do anything.
Then I tried to do a Reinstall OS X. On "Select the disk where you want to install OS X" the only options are my USB with the backup, or "Recovery HD". If I click Recovery HD there is a pop-up saying "This disk is locked." There are no other choices for install, and leaving Recovery mode doesn't appear to be possible.
Does anyone have a solution to this? So far my experience with Yosemite on two different macs has been torture and I do not recommend.
Thanks!You have a warranty. Take it back and ask the store to fix it for you. You do not need to encrypt the drive, but the Yosemite installation does so automatically unless you select the option not to do so during the install process. You need to look for that carefully. As of now you would need to turn off FV2 to decrypt the drive which takes about as much time as encryption does - quite a while unless you have a small capacity SSD.
-
I installed new hard drive and I am trying to restore from time machine external back up. I restarted the computer and held the Command key and the R and the restore utility does not appear. what can I do
Command + R keys are for Macbooks running Lion and Mountian Lion only. ( i could be wrong on this)
you have a couple of options:
Do a clean install of Snow Leopard via Install DVD.
Clone your old hard drive to your new hard drive via Carbon Copy Cloner
Or click on the link below to give you a better idea.
Hope you get it sorted out.
http://pondini.org/TM/14.html -
New MBP set up - restore from time machine
My old MacBook (mid 2007) running Snow Leopard has died. I just got a new MBP Retina running Yosemite.
Now, I have a few question that I googled for answers, but I am confused. I would appreciate any help, guide, orientation.
(1) Will I have problems restoring from Time Machine, created on a Snow Leopard, to a new MBP running Yosemite?
(2) Should I say yes when the set up assistant ask me to "restore from a back up"?
My goal is to have all the files, apps, and configuration from my old Mac into the new one keeping the new OS.
Is that possible?
Thanks in advance for your help.
Vero.I got "stuck" here:
"For details and instructions, see the appropriate page:
Using Setup Assistant on Mountain Lion or Lion
Using Setup Assistant on Snow Leopard or Leopard
Using Setup Assistant / Migration Assistant on Panther or Tiger"
I have Yosemite, should I follow the instruction for Using Setup Assistant on Mountain Lion or Lion?
I apologize if my question is "dumb" I just don't wanna mess up anything. I also realize my time machine has been created in Lion not Snow Leopard.
Thanks again! -
I recently had to replace my 2009 Macbook Pro's hard drive. I had the apple store upgrade the OS to Mountain Lion while it was in being repaired. I want to restore all of my old data and files. If I perform a restore from Time Machine, with a date prior to having the hard drive replaced, will it revert back to the old OS?
No, it won't revert to the prior OS X but you you may have third party apps installed that were compatible with Lion that may not be compatible with Mountain Lion.
App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS
After you restore from TM, check HD > Incompatible Software -
Install new hard drive, restore from Time Machine, File Vault Problems
Hello all,
I spent way too much time on this seemingly simple task, so I thought I would share my experience with others so they can avoid some pitfalls when upgrading a hard drive in a system that uses File Vault 2 encryption. The basic goal here is to replace a drive in a system that has only one drive, and the OS is Mavericks, and then have the new drive encrypted as before.
The problem is that a Time Machine restore onto a new drive will leave that without a Recovery Partition, which is required for File Vault 2 and some other important things. So we need to build a recovery partition. There are possibly several ways to do this.
Here's what worked for me (this is compiled from many sources that I found and already closed the tabs in my browser so I can't list all my sources):
1) Make a full backup to an external hard drive using Time Machine.
2) Go into the App Store and download OS X Mavericks but dont install it (close the window when it pops up asking to continue the install). Do this even if you already have Mavericks. At this point, there will be a folder in your Applications folder called Install OS X Mavericks (or similar).
3) Insert a USB drive that is at least 8 GB and format it using Disk Utility, naming it the default "Untitled".
4) Open a terminal and type
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
5) Wait for this to finish (took me about 30 min). Eject the USB drive and power down.
6) Remove the old hard drive and set it aside. Keep it for a few weeks until you know the new drive is working as expected.
7) Install the new hard drive and insert the USB drive. Hold the option key and press the power button. Choose to boot from the USB installer.
8) Use the disk utility to erase whatever partition shipped with the new drive, replacing it with a Mac OS Extended (Journaled) system. Verify that GUID is the partition type (in Advanced options).
9) Close the disk utility and install Mavericks. This can take a long time. My new drive is an SSD, and it sat at the "1 second remaining" part for about 20 min. Let it reboot (maybe it was 2 times?) and go through the setup until it finishes the install.
10) Boot into the freshly installed OS and open a terminal and type:
diskutil list
11) If there is a partition listed as Apple_Boot Recovery HD (mine was 650 MB), then you now have a recovery partition. If not, then go into the App store and download Mavericks, but don't use the USB this time, choose to do a regular install (or reinstall to be more correct).
12) Now there will be a recovery partition on the new drive and Time Machine will not overwrite it when restoring. Power down the system.
13) Plug in the Time Machine backup drive used in step 1. Press the option key and power on. Choose to boot from the recovery partiton (Mavericks).
14) Choose to restore from Time Machine backup. Wait until it finishes and log into the old familiar account.
15) Start a terminal and verify the recovery partition is still there (type diskutil list and see that the Apple_Boot Recovery HD is there). If it's missing, choose to download Mavericks from the App Store again and run the installation from this one.
16) Once there is a Mavericks recovery partition on the restored data you can simply turn on File Vault from the System Preferences Security section. It will require a reboot and then you login and wait for it to finish.
What a major pain to go through all of this for the sake of upgrading a hard drive. This should not be anywhere near as complicated. I hope this helps others avoid the very time consuming trial and error I went through in developing this procedure.Talked with Apple last night. Everything we did to restore lost images failed to fix the issue. I did have the images still on my camera's SD card so I was not breaking out in a cold sweat.
All Time Machine backups showed the same issue. HOWEVER, I suddenly remembered I also had a SuperDuper backup and voila. The images were there.
Moral of the story: you can't ever be too rich or have too many backups (I also have an offsite backup). -
i cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac with time machine no option appears if i reinstall from Mac OSX error comes and cannot able to recover from disk utility please help how can i reinstall mac OSX
Guitar21,
your MacBook Pro has booted into its Recovery mode. From the OS X Utilities menu, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get to the login screen now? -
Had to install a new hard drive early 2008 iMac, now can't restore from Time Machine.
Had to install a new hard drive in a early 2008 iMac, now can't restore from Time Machine. Backups show in Time Machine but I can't select them.
Serial Number QP*****1LW
<Edited by Host>Here are some notes on Time Machine problems.
http://pondini.org/TM/
Troubleshooting.html
I have asked the hosts that your serial number be removed. Best not to publish it, -
I can't seem to get the 10.7.4 update to work. It constantly freezing at the "moving items into place" phase. I let it run overnight and it's still frozen. I have to restore from time machine backup each time. Any help appreciated.
this is somethinng like the third post i have read about that update causing troubles...
But if I read this right- it is still in the install? Had you restarted and repaired permissions BEFORE the download? As well as emptying cache in safari first?
The other troubles I read had to do with after install, and caused by...oh what was it...it was early morning...an article at CNET news had it...google 10.7.4 update trouble and read the cnet one. -
My MacBook Pro recently shut down on me all of a sudden. When I restarted it, it popped up with a gray box with 'OS X Utilities,' then listed various options such as 1. restore from time machine backup, 2. reinstall OS X, 3. get help online and 4. disk utility. what do I do now? I have not backed up to Time Machine in a few days, so I'm not sure I should restore from time machine backup, is there something else I can do? Help!
Guitar21,
your MacBook Pro has booted into its Recovery mode. From the OS X Utilities menu, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get to the login screen now?
Maybe you are looking for
-
Upgraded to iOS 4.2 and iPhone no longer connects to AT&T Network.
Title pretty much sums it up. After updating to iOS 4.2, my iPhone 4 no longer connects to the AT&T Network. It just says Searching and rarely finds the network. When it does, it shoes 1 bar and as soon as I try to send a text or make a call, it goes
-
How to embed reports in an email using Scheduler
Hi all, I am using the "schedule" option in a webi report to deliver a report through email in pdf format. However, our end users want the report data to be embedded in an email rather than as an attachment. We are using BO XI 3.1. I tried searching
-
Batch Numbers Skipping in Internal Number range Assignment
Dear Gurus, We have Batch Management at Material Level. For a Material, we are facing an issue in Internal Batch Number Assignment. Systems Skipping 15-20 numbers buffer in Internal Number Assignment, we want it to be in a sequence. In OMAD for BATCH
-
How well does the MacBook Pro 2.0Ghz run games?
I am quite interetested because from the looks of the specs, it doesn't have the 'muscle' that you would see in a PC. Does it not need the high clocking speeds and memory that a PC needs? I pay quite a few game, mostly FPS and though I have a PC as m
-
Adobe Photoshop crashes when I choose language and accept?
After Installation of photoshop I clock on it to open it up. It asks me what language, so I choose English (International) then hit accept. Photoshop crashes and goes back to asking me what language