Restore From Time Machine Without DVD

I'm trying to set up a "simple" robust backup system for my father-in-law who is computer/mac neophyte.
I have an external USB drive with two partitions. One partition has a very thin bootable 10.5 which has only Disk Utility and DiskWarrior in the Dock; the other is set up for Time Machine, pictures, etc...
My question is, from the 'boot' drive, how can I restore the main/internal drive with the Time Machine backups? Is there a way to extract that "Restore System From Backup..." utility from the DVD?
Thanks

Thanks for the response V.K. I did the "thin" OS to allow him to run Safari (web search, etc...) in the event his main drive didn't work. Yes, I did have the idea of installing the install image on a small partition, but that would mean there are two bootable options and extra levels of complexity. Plus, it seems a little silly to carve out 8GB just for that utility.
Here's what I want to tell him (his name is Jim BTW) -
Jim, if you are having problems with your computers, here's what you should do:
1. Reboot and hold down the option key
2. Select the "Boot" drive
3. After the desktop shows, launch Disk Utility from the Dock
4. Select "Jim" and press [Repair Disk]
5. If you get errors try it again
6. If you still get errors, quit Disk Utility and launch DiskWarrior from the Dock
7. Select "Jim" and Press [Rebuild]
8. Press [Replace]
9. Quit DiskWarrior
10. Reboot, hold option key, Select "Jim"
11. If it still doesn't work/flaky, reboot hold the option key
12. Select "Boot"
13. After startup select <not available> to restore from Time Machine
It's the "<not available>" utility that I'm looking for...

Similar Messages

How to restore from Time Machine WITHOUT install discs using a second Mac

It's a question that is asked repeatedly all over the web by Mac users like me that bought in to Time Machine (TM) on the assumption that if their computer died one day it would be a piece of cake to restore from it, only for that day to come and then to be told "ahh, okay the first thing is to get your computers install discs..." (loud crashing sound of world falling around ears).
I've never been able to afford a new Mac and both of my machines were bought second-hand. Neither came with Leopard (both have Tiger and have been upgraded to Leopard via the net). This was never supposed to be a problem as I've been backing up with TM. However it appears that Tiger discs are as much use as an inflatable dart board when it comes to using TM. So I've been faced with the possibility of having to spend £130 (about two hundred Pres Sheets, Yankees) on the Leopard install discs just so that I can have the option of restoring from TM. Bonkers.
However after much nashing of teeth, a very long weekend learning all sorts of things about 'Target Mode', 'Single User Mode', 'Verbose Mode', 'Open Source 9' etc the following solution has worked without the need to go out and buy those over-priced discs...
What you will need:
1 broken Mac requiring restoration
1 second donor Mac running Leopard (or Snow Leopard so long as the broken Mac can run it)
1 firewire cable with the correct fitting at either end to attach both Macs together
1 Time Machine backup
Note: The following is for when you have given up trying to boot from your hard drive. In my case I couldn't boot in to Safe Mode etc. so was forced to format my drive and re-import everything. If you've read this far I'm assuming your at the same point as well and have tried everything else that's out there first.
Also - both my Macs are Power PC's so can't run Snow Leopard, so I can't say 100% this will work with SL (Intel) machines. From what I've read Snow Leopard will work with this procedure too, but if you've found differently please feel free to add your experiences below...
STEP ONE: Format the corrupt Hard Drive or replace with a fresh HDD
*Link the two computers with a firewire.
*If you're replacing your HDD, remove your corrupted hard drive from the 'broken' machine and insert a new one.
*Power up the broken Mac whilst holding down the 'T' key. This will start it up in Target Mode and you'll get a nice firewire symbol floating around that machine's screen.
*Power up the second 'healthy' Mac. This will be our 'donor' machine. When it starts up after a few seconds you will see the hard drive of the broken Mac appear on the donor Mac's desktop.
*Using your donor Mac's 'Disc Utility', format the broken Mac's hard drive (now's the time to partition it etc. if you want to).
STEP TWO: Clone your donor Mac
Your broken Mac is no longer broken and now needs a new OS. But you don't have the discs, right? Well get this... you can clone your donor mac on to your machine, even if they are totally different i.e. a laptop on to a tower.
*Again using Disc Utility, click on your donor Mac's hard drive. The restore tab appears as an option.
*Click on restore and drag the donor Mac's hard drive that contains the operating system in to the Source box.
*Drag the newly formatted hard drive on the broken Mac in to the Destination box.
*Click restore. Your donor Mac's hard drive will now be 'cloned' on to your no-longer-broken Mac. Once this is done, eject the first Mac's hard drive from your donor Mac's desktop. You no longer need the donor Mac.
Ta daa! Your machine now starts up happy and smily again. Time to restore all that stuff that's been sat on your Time Machine drive...
STEP 3: Restore from Time Machine using Migration Assistant
This is the really clever part that prompted me to write this piece in the first place. Time Machine IS accessible without those Leopard install discs you don't have. You need to use something called 'Migration Assistant'.
*Start up your machine as normal and you'll see it is an exact clone of the donor machine. Weird huh?
*Attach your Time Machine hard drive. It will show up as an icon on the desktop and because of it's size, you'll be asked if you want to use it as a Time Machine backup. Err, NO YOU DON'T! Click 'cancel'.
*Open Migration Assistant (if you can't find it just type it in to Finder and click). There are three options, the middle one being to restore from TM or another disc. Yup, you want that one.
*Migration Assistant will now ask you what you want to restore in stages, firstly User Accounts, then folders, Apps etc. It will even import internet settings
And that's you done. Let Migration Assistant do it's thang... altogether I had about 140gb to restore, so it wasn't exactly speedy. This wasn't helped by the fact that my TM hard drive is connected via USB (yes, I know). Just leave it alone and it'll whirr happily away...
Before I go - you don't have an option of when to restore from, and will restore from the last Time Machine save. At least then you should be able to access TM and go 'backwards' if you need to.
Also - for a Mac expert, the above will be up there with 'Spot Goes To The Farm' in terms of complexity. However, for the rest of us the above is only available in fragments all over the net. By far the most common response to 'how do I restore from Time Machine without install discs' is 'you can't'. If I'd found the above information in one place I could have saved a lot of hair pulling and swearing over the last couple of days, so forgive me for sharing this workaround with the rest of the world. Meanwhile your expertise will come in very handy for the inevitable questions that will get posted below, so please feel free to help those people that won't be sure if this solution is the right one for them. I'm no expert, I just want to help people that were stuck in the same situation (and looking at the web, there's a LOT of them).
Hope this is of use to someone, thanks and *good luck*!

Most maintenance and repair, restore and install procedures require the use
of the correct OS X install DVD; be it an original machine-specific restore/install
disc set or a later retail non-specific general install disc set.
By having an unsupported system, perhaps installed via an illegal download or
other file-sharing scheme, where no retail official discs are involved and the
initial upgrade was done by other means outside of the License Agreements,
you are asking us to discuss a matter of illegal installation and use of a product.
There are no legal complete OS X system download upgrades online; only bits
that are update segments to a retail or as-shipped machine's original OS X install.
+{Or an installation where a previous owner had correct retail upgrade discs, &+
+chose to not include them with the re-sale of the computer it was installed in.}+
However, to answer the initial question. To get and use an externally enclosed
hard drive in suitable boot-capable housing, and get a free-running Clone
Utility (download online; often a donation-ware product, runs free) you can
make a bootable backup of everything in your computer to an external HDD.
This is the way to make a complete backup to restore all functions to the computer.
The Time Machine has some limits, in that it can restore only that which it saves.
It does not make a bootable clone of your entire computer system with apps and
your files, to an external drive device. A clone can. And some of the clone utility's
settings can also backup changes to an external drive's system; if that other drive
is attached to the computer correctly.
Carbon Copy Cloner, from Bombich Software; and also SuperDuper, another of
the most known software names you can download and use to clone boot-capable
system backups of your computer's hard disk drive contents, are often cited.
However you resolve the matter of the running OS X system in your computer,
derived from what appears to be questionable means, is part of the initial issue.
Since you do need to be able to fix an existing installation by unmounting the
computer's hard disk drive and run the computer from the other (install disc or
system clone) while it is Unmounted; and use the correct Disk Utility version to
help diagnose and perhaps be able to fix it. You can't use a Tiger version Disk
Utility to fix a Leopard installation, and so on.
So, the situation and replies as far as they can go (since the matter does
constitute an illegal system, if it was arrived at without correct discs) is a
limited one. And file sharing of copied Mac OS X (and other) software is
also considered illegal.
And, one way to get odd malware and unusual stuff, is to get an unauthorized
system upgrade from an illegal source online. You never know what's inside it.
The other reply was not a personal attack; the matter is of legal status and as
you have a product with a questionable system, the answer is to correct it.
And if you want to save everything in your computer, make a clone to a suitable
externally enclosed self-powered boot capable hard disk drive. With older PPC
Macs, that would best be to one with FireWire and the Oxford-type control chips.
However that works out...
Good luck & happy computing!

Is there anyway to restore from time machine without leopard cd?

i really badly screwed up my system by deleting files i shouldnt have,
and now i have a kernal panic at startup.
i bought this macbook in america and left the cds there (duh) - so i cant restore from time machine...
is there a way to do it or do i need the cds to wait for the leopard cd to get here in the post?

Yes, need those DVD.
Maybe these help:
http://duncandavidson.com/2008/01/restoring-from-time-machine.html
http://www.macosxhints.com/article.php?story=2008011623365026

Can I restore from Time Machine without installer disk?

Laptop is mounted in FW target mode to Mac Mini, which in turn is connected to Time Capsule containing laptop's backups. Is there a way to restore laptop's HD from TC without having a Mac OSX installer disk?

It won't be recognized, because of a different MAC address. So the easiest way to restore the Laptop is to boot it from installer disc and restore the Backup.

Restoring from time machine without Recovery HD

So here's my situation:
I'm running a 2010 Mac Pro with OSX Lion installed. I've upgraded to Lion while my original HDD was still the Macintosh HDD. I've added an SSD drive for OSX for improved speed. So I've inserted the SSD drive, then booted from the Recovery HD on the original drive, restored OSX on the SSD drive from timemachine and then erased the original drive.
What I didn't realise was that by erasing the original drive, I also deleted the Recovery HD. So far I've not found a solution to get my Recovery HD back. Fortunately I didn't really need it, until now.
Yesterday I updated from 10.7.3 to 10.7.5 using System updates. I'm always carefull / late with updating because I'm running a sound studio and stability is more important to me than having the latest software versions. But Protools seemed qualified for this update so I installed it. Nevertheless, after the update the system became quite unstable. For instance, I doesn't even shut down. No problem, I have a good timemachine backup so I can just restore the stable system, so I thought.
But, I don't have a Recovery HD so I can't boot in recovery mode.
So, I tried to make a bootable USB stick with a Lion installer on it. I don't know if it is an official solution but I found it worth the try. I couldn't boot from it, it hangs showing only the Lion wallpaper but no menu or whatsoever. When I insert the USB stick in my laptop (a pretty old macbook running Lion as well) it works fine. Then I can get into the menu I need to make a timemachine recovery.
The next thing I tried is inserting the original install DVD with Snow Leopard on it to make a clean install, then upgrade to Lion through the app store and then recover my files. But even this DVD won't boot. It hangs showing the Snow Leopard wallpaper, exactly like it hangs booting from the USB stick.
I've reset the NVRAM and SMC and repaired permissions but nothing helps.
I really don't know anymore what can be the problem. I'd love to make a clean Lion install and make my system stable again.
Thanks in advance for your help!
Erik

Never mind, I finally got the Lion install USB stick to work and was able to restore the system. Works like a charm again! I'm not going to touch 10.7.5 again :)
Cheers

HT201250 Can I restore photo files from Time Machine without the use of an external drive? I'm trying to restore lost photo files and I see them listed in Time Machine (without use of an external drive), but when I try to restore I get a error code 36.

Can I restore photo files from Time Machine without the use of an external drive? While I was transferring photos back and forth from a thumb drive something went haywire and my IPhoto was wiped clean! When I click on Time Machine I see all the dated pages (without an external storage drive connected), go back to a date where all my photo files are there, click "restore", and I get the message: "The Finder can't complete the operation because some data in file cant be read or written (error code - 36)"

Thanks so much Terence. I tried some of the fixes from that page, but then discovered the suggestion to compress the Time Machine Back up of the original library and transfer it as a zip back to my computer as detailed here:
http://pondini.org/TM/E9.html
That worked like a charm. I really appreciate it.

Imac won't restore from time machine backup after HD (hard drive) recall replacement

I have an imac bought in 2011, running Snow Leopard. It required an HD replacement due to the 1 TB Seagate recall - the replacement was done by a certified Apple repair station yesterday. Before the guy left he started a backup/restore from my latest time machine backup set. It failed. I attempted it two times and got error messages that it failed and the computer needed to be restarted to try it again. No luck. I called the guy back and he told me to call Apple Care. Not thrilled about that response since the guy had just left my house I did what he told me to do. (A quick sideline here: I recognize that a time machine backup should be no big deal and SHOULD work everytime, but it doesn't. It irks me that Apple is replacing my HD through no fault of mine and yet they don't allow the restore of data to be a "covered" expense in this process - this isn't just because this was an authorized repair guy - the Apple store would have done the same).
Back to the issue. When I called apple care they pretty much had me try the same thing again with an earlier back up set. To my knowledge, it didn't work. I say this because it looked like it was working and when I came back to the imac later, it had restarted and once again booted to the OSX install. (The boot disc is still in the imac). When I tried to boot from another location, one did not show up to boot from so I assumed that the data didn't transfer and it forced another restart. So, I tried something else. I tried to re-install the snow leopard OSX without using the restore function. That appeared to work and then when the machine restarted it asked if I had another mac and I chose the option to get the files/apps/etc. from my time machine backup. The computer chose what I can only assume is the most recent backup set (It chose what I know to be a subfolder that appears under the dated backup folder - Macintosh HD--which btw is confusing seeing as that's always the name of the HD on the imac). I again stepped away from the computer so it could do its thing for two hours. When I returned, I was back to the MAC OSX screen that asks you to choose a language. There were no more options to choose DISK UTILITY or RESTORE FROM BACKUP, etc. When I clicked on English it took me right back into the screen where you say whether you have another Apple that you want to transfer data from. I realized that the imac must have restarted and I assumed maybe it was because the boot disk was still in - except how do you get the disc to eject? I also initially assumed that the backup had somehow failed again and triggered a restart. I tried to choose the option to just set up the machine without transferring data and when I got to the choose a name for your HOME folder message I tried to enter the same name I had it as before and it wouldn't allow me to do so, saying that that name was already in use. I also tried a different name and that didn't work either - got the same message (I assume if it is not the same name that it won't sync up with the time machine data from the backup set). So, I almost tried the "select time machine backup" option again until I looked at my HD space. Clearly, there is space that has been used. HD space was 997 at the start and now it's 636. My initial thought is to somehow get back into the setup area where I can use disc utility and erase the whole thing and then start over but 1) I don't think it's going to work even if I could get back there 2) I have no idea how to get this thing to reboot into that mode 3) I can't get the boot CD out to even try to restart to see if this thing did what it was supposed to, SO NOW I AM TOTALLY STUCK! I have not called Apple Care back because quite frankly they were useless the first time. I have a call into the repair guy but who knows how much help he will be. In the mean time, I have a million things to do and a computer that isn't working - Whoever said Apples never have issues needs to be seriously censored!
A few other notes: I use Time Machine Editor to run my backups weekly. It was set up that way from the get go by an Apple rep who came to my house to get us up and running. Editor should not effect the way that time machine does its work, so I doubt there is relevance but thought it worth mentioning.
One other note is that the Apple Care agent tried to have me do something called a "Source" something or other from the disk utility screen but when she realized that my backup file (shown by date) contained many other sub files (11-27-12/MacintoshHD/MyNamesIMAC/etc.), it was not possible to run this operation - thus we aborted. Sorry I don't remember the name of the process and unfortunately now can't access that option to go find it.
If you can help me, I would be eternally grateful! I am open to having a phone conversation if you are willing to give me your email to mail you my number. I have so much work to do this week and this was the last thing I needed. Did I mention this was supposed to be EASY?
I used to be quite the geek with my PC - still on the learning curve with the mac but not enjoying it. I am fairly tech savvy and I can follow instructions for a step by step solution if you've got one.

I got a recall and had the drive replaced. I have retored 3 timesa dn even had apple do the job and it is still not right. I still can't get a simple ghost of the data from time machineback tot he new drive.
This is Apple's explaination as taken from their web page.:
Restoring your entire system from a backup
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Recovery system (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility.
Note: If "You can't restore this backup because it was created by a different model of Mac" appears when restoring a backup that was made on a different Mac, follow the onscreen instructions.
I even posted this information on the community and apple removed it... because they don't like the:
Off-topic or non-technical posts
Non-constructive rants or complaints
But here is my experieince:
Take in 27iMac running 10.6.8, 5-7 days, what a joke, my boss will be happy to pay for a week without working. Finally get, "if you have TM back up, 3 days." Get machine back with 10.6.3, hit the R recovery, click TM back up, runs for 2 hours, reboots, looks great. Box up take back to office... update to install - OH NO, still running 10.6.3. Updates crash with no specific error on install, BUG PROBELM, nothing runs.
Call Apple... after hours, tells me to boot using 10.6.2 disk, wipe, reinstall OS, udate to 10.6.8, THEN do the restore. GREAT! Only thing 10.6.2 DVD won't read... now back on phone... take back to the store, Genius says, he'll ix it just like it was. PROMISES it'll be fixed.
Pick up next day, supposedly, booted to disk, wiped drive, reinstalled, updated to 10.6.8 and THEN did the RIGHT restore... Looks GREAT... apps run and 10.6.8 OS. Back to the office... NOT RUNNING right!!!... fonts messed up, drop box app needs new install, cocktail needs upgrade, Fetch not working, memorized paths gone... back ups locked out of permissions... ***!!
4 hours on phone with apple and still no rsolution - to missing "settings". Seems there are THREE WAYS TO RESTORE (according to apply tech)... Running MIGRATE ASSISTANT and being able to choose your files, including settings, "R" RESTORE after they load a new OS... or NOW WAITING for them to send me a bootable 10.6.3 disk and then boot from disk, w/o installing OS and doing a restore from TM. I think this is done via the disk Utilties application.
So now can't back up without doing a full 400 GB back up since permissons are screwed and possibly destroying any good back ups... can't work, like having hands tied behind back. WAITING for solution! Very upset!!!
I did my first restore just like they said and now an 10 days without proper machine. Just FYI. I thnk I am going to make the store do the tech work so I have somthing to fall back on.

Old Hard drive died...automated restore from Time Machine?

Is there a way to just sort of "one click" the process for restoring from an external drive I've been using? My hard drive died on my MacBook and I had it replaced under my Apple Care warranty. Without dragging and dropping things is there an easy way to just pick up where I left off? I'm trying to search around and I'm not finding any solutions for this particular situation.

you can do a full system restore from TM.
Start from the leopard install DVD, once past the language screen go to Utilities menu and select "restore from Time machine". follow the instructions.

Can't restore from time machine after SSD upgrade

Macbook Pro 13" mid-2009, 10.7.5 Lion
I just swapped out my 160GB HDD with a 250GB SSD on my MBP. When I booted up, I pressed Command-R to try to get into recovery mode but all it does was showing a gray folder with a question mark on it.
I had previously backed up my HDD with time machine. My original HDD is no longer available because I tried to upgrade to Mavericks (since the command-R was not working) and upon restarting my MBP was locked with system pin code (that is another nightmare all by itself)
What are my options besides getting a 10.7 Lion CD from the apple store and try to boot it up that way? and then restore from time machine?
Any other way I can get into receovery mode?
Thanks (My MBP is now a brick sitting on my desk)

It's a bare drive so it isn't formatted and it doesn't yet have a Recovery HD installed on it.
Your computer originally came with a version of Leopard installed. You can reinstall it if you still have the original discs that came with the computer. Or, if you have a retail Snow Leopard DVD you can reinstall Snow Leopard from which you can then upgrade to Mavericks (Lion is no longer available for re-download.) It's unlikely your local Apple Store has a Lion USB flash drive or DVD although you can certainly make an appointment and ask for their help.
You should see if you can boot from the Recovery HD invisible image in your Time Machine backup drive. Connect it to the computer and use OPTION boot to get the boot manager. If you see a Recovery HD on your backup drive displayed, then boot from it.

Downloads folder missing after system restore from Time Machine

I installed a new HDD, installed Leopard, and the did a system restore from Time Machine. Everything seems to work fine except from a big question mark in the dock, where downloads folder should be. Any suggestions pls?

Thank you very much for your quick answers.
Probably the problem originated from excluding the Downloads folder from my backup, although it should have been there in my new installation. The interesting thing was that this folder were nowhere to be found in the Finder, and by trying to download something from Safari, it just wouldn’t.
I did a Repair Permissions from the HDD, not the Leopard DVD, and all came back to normal.
I have to admit, that coming from The Win world, this HDD replacement was the easiest and fastest ever, by far!

System Restore from Time Machine Back up and Mail

Hi
I have around 16,000 Messages in my Mail 3.2 Inbox. I use Gmail IMAP service. One thing I like about Mail is that next to all my messages there are these arrows that indicate whether I have replied to or forwarded a particular message and clicking on them takes me to my response to a particular email.
I need to reformat my MBP HD and want to do a system restore through Time Machine.
My question is, will Mail return to my current state (with all the arrows and tags) after I do the complete restore from Time Machine.
Any help on this is highly appreciated.
Cheers!

Mheck21 wrote:
I replaced the internal because I need more space, I'm not an expert, but I've done it before. I wasn't having trouble I was just running out of room and decided to upgrade?
Ah, ok, that rules that out.
I think it wasn't backing up because it was showing I had files on the external but I couldn't locate them. It's my understanding that the external must be blank to back your computer up with time machine.
No, it doesn't have to be empty (although Time Machine works best if it has its own, exclusive space). Without the error message(s), we don't know what is/was wrong.
I have run the Verify Disk on the internal and it says its all good.
Ah, good. That means you don't have directory problems.
I have not run a Repair Disk Permissions. I am not sure how to do that? Is that also located in the Disk Utility.
Yup, same window, different button.
I tried to just run the update from the update software option in the apple on the top left. I also then ran the combo that I downloaded from the apple site.
With what results? Did they compete? If not, what message did you get?

Restoring From Time Machine Migration Assistant (and other ??)

Hello
Please bear with me on this long question....
For several reasons I reinstalled ML which involves erasing the HDD first. I do have everything bakced-up to Carbonite and TM. Carbonite is slow as molassess so I opted to try Migration Assistant/TM to restore my files. MA does not allow you to choose an older (good) backup and the backup that was used was an incomplete one as evidenced by the photo library being incomplete. Another poster had a similar question and the solution involved using the install disk. There is no install disc since it was a download from the Apps store.
Carbonite has a tendency to freeze-up during a long download. Restarting it brings your download back to the very beginning. I'm not happy about Carbonite. I've heard of SuperDuper and seems to have gotten good reviews.
Questions:
1. Is there a method to access an older TM backup from MA?
2. Is there a better option that Carbonite?
3. Is SuperDuper a good option for backups?
thank you, Bruce.

If your Mac shipped with a System Install DVD then boot from it and choose "Restore from Time Machine backup".
If your Mac shipped with Lion already installed you should be able to use OS X Recovery. Boot while holding ⌘ R and choose "Restore from Time Machine backup".
Either one should present a dated list of complete system backups from which to choose. Ideally it should be the most recent one, but if you have reason to believe it is incomplete (it should not be) then try an earlier one.
You can also boot from a locally connected Time Machine backup volume. Make sure it is connected with USB or FireWire and boot while holding an Option key. This will invoke Startup Manager, from which you can select your Time Machine backup volume. It will present the same restore options as OS X Recovery.
These options will be faster and should be less prone to difficulty than using Migration Assistant.
Time Machine and "clone" software use very different philosophies. SuperDuper! is good, so is Carbon Copy Cloner. They are more customizable than Time Machine, whose customizable features essentially consist of an "on / off" switch
Of course that is also its sole advantage over the others - it's boneheadedly simple to use.
Forget Carbonite, as you learned it does not work well on Macs. I know of no similar offsite backup services to recommend.

Install new hard drive, restore from Time Machine, File Vault Problems

Hello all,
I spent way too much time on this seemingly simple task, so I thought I would share my experience with others so they can avoid some pitfalls when upgrading a hard drive in a system that uses File Vault 2 encryption. The basic goal here is to replace a drive in a system that has only one drive, and the OS is Mavericks, and then have the new drive encrypted as before.
The problem is that a Time Machine restore onto a new drive will leave that without a Recovery Partition, which is required for File Vault 2 and some other important things. So we need to build a recovery partition. There are possibly several ways to do this.
Here's what worked for me (this is compiled from many sources that I found and already closed the tabs in my browser so I can't list all my sources):
1) Make a full backup to an external hard drive using Time Machine.
2) Go into the App Store and download OS X Mavericks but dont install it (close the window when it pops up asking to continue the install). Do this even if you already have Mavericks. At this point, there will be a folder in your Applications folder called Install OS X Mavericks (or similar).
3) Insert a USB drive that is at least 8 GB and format it using Disk Utility, naming it the default "Untitled".
4) Open a terminal and type
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
5) Wait for this to finish (took me about 30 min). Eject the USB drive and power down.
6) Remove the old hard drive and set it aside. Keep it for a few weeks until you know the new drive is working as expected.
7) Install the new hard drive and insert the USB drive. Hold the option key and press the power button. Choose to boot from the USB installer.
8) Use the disk utility to erase whatever partition shipped with the new drive, replacing it with a Mac OS Extended (Journaled) system. Verify that GUID is the partition type (in Advanced options).
9) Close the disk utility and install Mavericks. This can take a long time. My new drive is an SSD, and it sat at the "1 second remaining" part for about 20 min. Let it reboot (maybe it was 2 times?) and go through the setup until it finishes the install.
10) Boot into the freshly installed OS and open a terminal and type:
diskutil list
11) If there is a partition listed as Apple_Boot Recovery HD (mine was 650 MB), then you now have a recovery partition. If not, then go into the App store and download Mavericks, but don't use the USB this time, choose to do a regular install (or reinstall to be more correct).
12) Now there will be a recovery partition on the new drive and Time Machine will not overwrite it when restoring. Power down the system.
13) Plug in the Time Machine backup drive used in step 1. Press the option key and power on. Choose to boot from the recovery partiton (Mavericks).
14) Choose to restore from Time Machine backup. Wait until it finishes and log into the old familiar account.
15) Start a terminal and verify the recovery partition is still there (type diskutil list and see that the Apple_Boot Recovery HD is there). If it's missing, choose to download Mavericks from the App Store again and run the installation from this one.
16) Once there is a Mavericks recovery partition on the restored data you can simply turn on File Vault from the System Preferences Security section. It will require a reboot and then you login and wait for it to finish.
What a major pain to go through all of this for the sake of upgrading a hard drive. This should not be anywhere near as complicated. I hope this helps others avoid the very time consuming trial and error I went through in developing this procedure.

Talked with Apple last night. Everything we did to restore lost images failed to fix the issue. I did have the images still on my camera's SD card so I was not breaking out in a cold sweat.
All Time Machine backups showed the same issue. HOWEVER, I suddenly remembered I also had a SuperDuper backup and voila. The images were there.
Moral of the story: you can't ever be too rich or have too many backups (I also have an offsite backup).

Should I restore from Time Machine, replace hard drive, or neither?

I appeared to have a full functioning Macbook Pro, until I ran Onyx, and after scanning my hard drive, it said that there were issues and restarting in recovery mode and repairing the disc should be done. Both Disk Utility and DiskWarrior were unable to repair the damaged hard drive.
Obviously replacing the hard drive would sort out the problem, and I realise that it might be a sign of the start of a failing hard drive... OS X said to backup, erase my drive and restore, so should I do a restore from Time Machine?
Or should I just leave things now until there are more signs of failure?

Alilynx wrote:
I appeared to have a full functioning Macbook Pro, until I ran Onyx, and after scanning my hard drive, it said that there were issues....
OnyX runs the same Disk Utility program that's in your Applications/Utilties folder, it uses the Terminal/command line verision. The Disk Utility program is a GUI front end to the Terminal version.
OnyX launched the Terminal version of Disk Utility in other words, and so it's Disk Utility that is telling you that there is a problem with the drive it's unable to repair.
it said that there were issues and restarting in recovery mode and repairing the disc should be done.
Disk Utility on the Macintosh HD partition (in OS X) is telling you to boot into Recovery HD partition and use that version of Disk Utiltiy to repair the Macintosh HD partition. To do this you hold the command and r keys down and boot the computer.
Both Disk Utility and DiskWarrior were unable to repair the damaged hard drive.
Yes because to be able to repair the Macintosh HD partition it can't be booted from, why you instead boot from the Recovery HD partition instead.
Obviously replacing the hard drive would sort out the problem
You don't need to go that far at this point, unless the drive is having mechanical issues.
OS X said to backup, erase my drive and restore, so should I do a restore from Time Machine?
You have software issues, when booted from the Recovery HD partition that version of Disk Utiltity says it can't repair the Macintosh HD partition then it's time to erase the Macintosh HD partition and restore from TimeMachine.
However there could be a problem if the data on your TimeMachine drive is not current or is also corrupted which it copied from the failing internal drive.
You might want to perform data recovery steps first to grab your data off the Macintosh HD partition so you have a clean copy.
Create a data recovery/undelete external boot drive
If this is all above your head, your local PC/Mac repair shop will image your current boot drive to a new extenral drive, then erase the Macintosh HD partition and reinstall OS X for you or restore from TimeMachine etc.
They will hand you the external drive with your files and everything which you can pick through to restore back to your machine.
It all depends how important your data is, because if you go and erase the Macintosh HD partition, your destroying one of your copies leaving only one on the TimeMachine drive, which might be in worst shape or outdated without your knowledge.

How to restore from Time Machine onto an external drive

Hi all,
I am a backup freak, and I don't feel entirely safe with Time Machine taking care of backing up my system unless I can test every now and then that I would be able to do a full restore. I've had problems in the past with .Mac/MobileMe's Backup.app, which would not be able to restore from an otherwise apparently successful backup, for one reason or another.
So, is there a way to test a full restore from Time Machine onto an external hard drive?
Thanks for your advice

Allamistakeo wrote:
Hi all,
I am a backup freak, and I don't feel entirely safe with Time Machine taking care of backing up my system unless I can test every now and then that I would be able to do a full restore. I've had problems in the past with .Mac/MobileMe's Backup.app, which would not be able to restore from an otherwise apparently successful backup, for one reason or another.
So, is there a way to test a full restore from Time Machine onto an external hard drive?
of course. connect an external, boot from the snow leopard DVD and choose "restore system from backup" from the utilities menu. follow the instructions and choose the external drive as the restore destination. make sure it's properly formatted. it should be formatted mac os extended with GUID partition scheme.
also, you might want to consider doing secondary backups in addition to TM by making a bootable clone on another external drive. use CCCloner or Superduper for such backups.
Thanks for your advice

Restore From Time Machine Without DVD

Similar Messages

Maybe you are looking for