Restore in FF4 functions differently?

In FF3, when I restored a session, each tab was refreshed with the most current content. It seems that FF4 restores the tabs to their previous state without updating any of the tabs.
Have I missed a setting to change this? I do not want the historical page, but rather the most current page available when I restore a session.
Thanks.
~Bob
PS. Posted from another computer still on FF3, so info on my setup not accurate for this question.

I think this may have to do with a difference in a plug-in in FF4, but unsure. Maybe Tab Mix Plus? Something with whether the cache is checked upon reopening a tab or not. Any other clues appreciated.
~Bob

Similar Messages

  • ITunes 12-Please please restore side bar functions for playlists -and how can i tell when and if it is safe to "eject" devices after synching

    ITUNES 12-4points
    1) Please restore the easy function whereby the side bar easily accommodates playlists
    2) How do i know when devices can be ejected following synch--no visible drop down ?
    3) How can i change the fonts and font sizes of the library-over and above the noddy large/small toggle in preferences
    4) Look forward to a proper Apple update which includes  full functions of iTunes radio. Hurry up with the latter-Spotify is overtaking you guys!

    How do i know when devices can be ejected following synch--no visible drop down ?
    I can only tell you based on what I see w/ my iPhone...
    When I plug in my iPhone I get the following icon on the top bar:
    If I click on that (that's when it turns blue), I get a sidebar.  At the top I see this while it is syncing:
    The circle-arrows spin.  Once the sync is finished, I see this:
    I then know the sync is over and I click on the Eject icon that replaced the circle-arrows.
    Are you seeing something different?

  • Restoring pre-lion functionality to iCal

    I've put up with the changes to iCal ever since I installed Lion, but seriously! It seems to me that much of what was useful (or rather, made it tolerable) about iCal has been lost. Please tell me if I am missing something:
    Adding events: iCal now defaults to an all-day event and when I de-select all day, it defaults to 10:00 am - 6 pm, which I then have to change every. single. time. There is no preference setting to change this as far as I can tell.
    Calendar month sidebar: I typically look at my calendar in the month view. It used to be that there was a side bar that showed small views of the preceding and following month. Now gone. There is no preference setting to change this view as far as I can tell.
    Event times do not show: Even though I have selected "show event times" in preferences, event times do not show in month view. They did pre-Lion.
    I keep thinking I must just be missing some way to restore this basic functionality. I scour Prefences after each update to see if things have changed but am disappointed.
    Is there a better calendar that will sync with my iPad/iPhone??

    iCal in Lion is as you describe and does not include the small calendar.
    You might like to consider BusyCal. This is sort of 'iCal Pro': it works with Lion, it includes the small calendar and left sidebar. ToDos can repeat and dated ToDos can be displayed on the day in the calendar. Images can be added to entries, and the font can be customised for any entry. It will sync to iCloud or you can sync with other machines on your own local network independently of any server.
    There is a free trial available from the website: you can buy it from the website or slightly cheaper from the Mac App Store.
    (I have no connection with this company.)

  • TS3581 iPhone 4S - The XCarlink iPhone/iPod accessory for Mazda Bose autochangers is functioning differently after iOS 5.1. The Shuffle function no longer works. Has anyone else experienced this problem?

    The XCarlink iPhone/iPod accessory for Mazda Bose autochangers is functioning differently after iOS 5.1. The Shuffle function no longer works and it plays Albums or Genius Playlisys only (not self-made playlists). Has anyone else experienced this problem?
    Previously, the iPod function enabled one to see the track that was playing and control playback (such as repeat or shuffle) via the iPhone screen. Now all I see is an "Accessory Connected" message.

    Somewhere in there, is there a question for us, your fellow users in these user to user support forums?

  • Can someone help me get my IPOD Touch 3g started? It will only flash the Apple logo off and on. Has been through restore multiple times on different computers, and still will not start.

    I have tried restoring the ipod on different computers, one Vista, and one 7. On both, the restore process seems to complete just as it should, until the point where it says "your IPOD will now restart and will appear in listed devices. This IPOD never restarts. The Apple logo just stays on for approximately 30 seconds and then the screen turns off for five or ten seconds and the logo comes back on, over and over for approximately forty five minutes or so, Occasionally the "connect to USB" will come back on, but that is rare. When that does happen, the I-Tunes recognizes it again as an IPOD that needs to complete the restore process. VERRRRRY AGGRAVATING!!!

    Time for an appointment at the Genius Bar of an Apple store. It appears you have a hardware problem.

  • ALPS pointing device - how to restore the scrolling function

    Until a couple of days ago, my mousepad allowed me to scroll. I've tried looking at the settings in control panel/mouse but the options have disappeared.
    Is it a driver issue? If so, which driver should I download, and where from?
    The current driver is:
    v5.3.203.18
    and was created 17/07/2003
    If it's not a driver issue, does anyone have any suggestions on how to restore the scrolling function?
    Many thanks :)

    Thank you for your replies :) Unfortunately, I can't rollback as system restore has been turned off as well as all the other odd things that have been happening.
    Eldorado, I'll give your suggestion a try :)
    Once I've uninstalled and rebooted, will the laptop definitely find the driver automatically when it starts up?
    I'm worried that it won't, and that I won't be able to use the computer...

  • Why did carefully over heating my 4s restore the wifi function? This, after 2 months of mysteriously grey out wifi buttons, loads of time trying to resolve issue with apple tech only to be told I must pay $199 to repair the problem. I'm disillusioned now

    Why did carefully over heating my 4s restore the wifi function? This, after 2 months of mysteriously grey out wifi buttons, loads of time trying to resolve issue with apple tech only to be told I must pay $199 to repair the problem. I'm disillusioned now

    Is the Wi-Fi button greyed out?  Try this article: http://support.apple.com/kb/TS1559
    Also, make a backup to iTunes of the device.  Then restore it as a new device.  If you still have wi-fi greyed out, then contact Apple again, and explain that you believe you have a hardware issue.  They may still ask for a $19 deposit, but if it is actually hardware related, then you won't be charged the $19.  Only if it is software related do you get charged that $19.

  • HT204782 Will there be a patch to restore Panasonic AVCHD functionality to FCPX 10.1.4 in the current version?

    Will there be a patch to restore Panasonic AVCHD functionality to FCPX 10.1.4 in the current version?

    je1s wrote:
    What model?  I'm using the AGAC-130P.  Also, are you shooting at the suggested settings above or are you in 1080p at 25 or 30 fps?
    I don't know what the "suggested settings" are. I always shoot at 50p.
    I don't have the exact model here (520 something?), but my camera is not a professional one like yours.

  • I have two screens on my Apple Mac and could extend work across both. Now updated to Mavericks and cannot do this. What can be done to restore my original functionality?

    I have two screens on my Apple Mac and could extend work across both. Now updated to Mavericks and this no longer works. How could I restore the previous functionality? Is somethong wrong?

    Hi Eustace.
    Thanks for replying to my problem. After posting I noted the "More Like This" box on the right of the screen. The top topic was "Restore old dual screen functionality" and turned out to be the the same question with a surprising answer - in the "Mission Control" dialogue, NOT the "Displays" dialogue. There are five tick boxes at the top of the Mission Control screen and the last of them is "Displays have separate spaces" and this box was ticked through the loading of the Mavericks op. system (presumably). Unticking this box, as advised, restored the 'extended' mode and all is now well.
    We live and learn!

  • For some reason the function keys on my mac book changed, I restored them and now the shift keys have the function of showing the desktop and all windows.  I there a way I can restore the original function?

    For some reason the function keys on my mac book changed, I restored them and now the shift keys have the function of showing the desktop and all windows.
    I there a way I can restore the original function?

    You do not tell us what OS version you have. In OS 10.8.2, do this:
    Apple Menu / System Preferences / Language and Text / Input Sources.
    Select the language you want. Mine is set to Canadian English.

  • HT4859 I have restored a new iPhone from an iCloud backup but selected the wrong backup point. Can I restore again from a different point.

    I have restored a new iPhone from an iCloud backup but selected the wrong backup point.  Can I do the restore again from a different backup point?

    Welcome to the Apple Community.
    settings > general > reset > erase all content and settings, once complete the set up assistant will ask if you have an iCloud back up, follow on screen instruction to restore from it.

  • HT201263 is it possible to undo changes to your iphone content and settings after running the restore from backup function?

    is it possible to undo changes to your iphone content and settings after running the restore from backup function?

    no

  • I forgot my iphone 4 password and the device is disabled but it doesn't let me restore it on a different computer that it is not synced with

    I forgot my iphone 4 password and the device is disabled but it doesn't let me restore it on a different computer that it is not synced with

    See: http://support.apple.com/kb/HT1212. You will have to restore the phone using iTunes and set it up as new.

  • What permission is needed for a login to access the restored database(backup from different server)

    what permission is needed for a login to access the restored database(backup from different server)
    frequently reach the situation, when vendor restores a database, but he cannot access it unless I remap or add his login to the restored database. What permssion can grant the vendor so that he can but only can access the database he restored, not all other
    databases.

    Hi George,
    According to your description, When you move a database from one server that is running SQL Server to another server that is running SQL Server, a mismatch may occur between the security identification numbers (SIDs) of the logins in the master database
    and the users in the user database. As other post, you can use the sp_change_users_login stored procedure to map SQL Server logins. Also , you can use the following statement after doing the restore database. It will
     fix the mis-mapped SID inside the restored DB.
    ALTER USER <username> WITH LOGIN = <username>
    For more information, you can review the following article.
    http://blogs.lessthandot.com/index.php/DataMgmt/DBAdmin/MSSQLServerAdmin/do-you-still-use-sp_change_users_login/
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Restore Rman hotback in different machine with different Database name

    Hi All,
    I have oracle 11.2.0.3.0 in Windows 2003 R2 server 64 bit version,i have my production database "Proddb" in archivelog mode , I have taken RMAN hot backup at 9 AM and i want to restore this RMAN backup into new Machine with new Db Name "Testdb" at 1 PM ,in between 9 AM to 1 PM lots of transactions happened , lots of archivelogs got generated ..
    Can anyone tell me how to restore RMAN Backup in different machine with new Db name and also how to apply those archive logs which got generated between 9 AM to 1 PM.
    Thanks & Regards,
    Vikash Jain

    http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmrecov.htm#i1007814Yes you will have to apply all those archivelog after yours last backup 9:00 AM to 1:00 PM , someone give you good link to restore the RMAN backup from one machine ot another machine but it is missing one thing which you require is to restore database at new machine with new DB_NAME , for that you can do it in two ways after restoring and recovering the database.
    1)After restoring with original name "Proddb" do not recover database ,Create contorlfile in control.txt format using alter database backup controlfile to trace,Shutdown restored database ,delete/rename contorolfile ,recreate controlfile from control.txt which by setting its first line as
    Create controlfile set database "Testdb" resetlogs noarchivelogStartup mount with new created controlfile after defining new controlfile in pfile ,recover database at sql using backup controlfile "recover database using backup controlfile untill cancel" supply log till 1:00 PM ,Open database with resetlogs,run at comand prompt
    sqlplus "/ as sysdba" @aduplib.sql so2)Or better approach is http://docs.oracle.com/cd/B28359_01/server.111/b28319/dbnewid.htm.
    Khurram

Maybe you are looking for