Restore iOS after iOS 7 update. iPhone 5, iPad 3, and iPod touch 5th gen. all 2 GB in 'Other'
All my iOS devices have 2+ Gb in the 'Other' section of iTunes on my Mac. I have all the devices upgraded to iOS 7 (iPad 2, Third gen. iPad, 5th gen. iPod touch & iPhone 5). I do have a lot of apps.
The 4G iPod does not have enough memory (RAM) for iOS 7
All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB
Similar Messages
-
Hi, I have numerous different Apple products, an iphone 5c, iPad mini and iPod touch 5th gen.
I have had them all for only relatively short periods of time yet the lightning cable has stopped working on all of them?
On the touch, charging has stopped completely?
Is this a manufacturing issue with the new charging system?Hi, yes I'm using the original apple cables.
This definitely isn't user error nor confined just to me, the devices are used by different people in the home.
On a quick sample around the office (survey of 7 people let me add) 4 of them said the cables had broken on them and had to be replaced.
Having also searched through the forums it appears this is a fairly widespread issue.
It's defo not user error! -
My apple devices all on iOS6.1.3 (iPhone 5, iPad 4 and iPod touch) won't find Bluetooth devices
My iPhone 5, my iPad 4th generation and my iPod touch will not find my Bluetooth panasonic speaker or any other Bluetooth devices that are switched on. They all have the iOS.6.1.3 software. When you turn on Bluetooth on any of these devices it just swirls around and doesn't continuously and never finds any devices despite my Panasonic Bluetooth speaker being available. Can anyone help or come up with any suggestions as to why all three of my devices cannot Find or connect to any Bluetooth device? Much appreciated!! Thanks!! X
Based on your explanation, it sounds like your Panasonic speaker and "any other Bluetooth devices that are switched on" are not in pairing mode when your iPhone, iPad, and iPod are looking for devices to pair with.
The most likely way to achieve your objective would be to cycle power on the Panasonic speaker and other devices at just about the same time as you start your Bluetooth pairing hunt on the Apple devices. In other words, turn on Bluetooth on, say, the iPhone and then quickly after that, cycle power on the Panasonic speaker. -
Blue Screen Of Death When Unplugging iPhone 4s(7.0.6)/iPod touch 5th Gen (7.0.4) !!
Now heres a problem i have been facing everytime i try an unplug iphone 4s/ipod touch 5...
and heres what i have tried out after searching the net and this forum
1) tried different usb ports
2) tried different cables all genuine apple products if someone has a reason/solution telling me to use genuine apple product
3) uninstalled drivers but not itunes
4) complete uninstalled itunes (full uninstalllation i mean deleting all files n folders from c drive after uninstalling)
now heres the catch !!
when i uninstall drivers and itunes and try connecting iphone/ipod ,drivers are automatically installed and i guess they are mtp or apple iphone/ipod drivers or whatever.. no when i download latest itunes and install it and connect device all works well... but wghen disconnect device BOOM blue screen of death !!
so i guess itunes is the problem !!! tried the whole thing repeatedly same result
itunes= blue screen of death !!!
hope someone can help me out here !! details of desktop and itunes given below and windows 7 crash report also can give link of dump files if required cause cant attach it here !!
desktop:- windows 7 ultimate 32bits
itunes:- latest itunes 11.1.5.5
after reboot alert:-
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 1000007e
BCP1: C0000005
BCP2: 00041CE6
BCP3: 8E993A74
BCP4: 8E993650
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
help/solutions/links apperciated !! thanks in advance !!Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no player is required to read a burned disc, having a "good" one from a high quality blank will help -
Apple currently updating buy it now web page iPod touch 5th gen
Hey guys good news, apple is currently updating the buy it now we page on there apple website, which says we're updating come back soon, hopefully it's going to be a official release date we've all been waiting for.
The USA Apple store still just says shipping in October.
iPod touch 32GB White & Silver
$299.00
6 or 12 month special financing options
Available to ship:
October
Free Shipping -
My iPod touch 5th Gen iOS 8.1 won't turn on, charge and CONNECT TO iTUNES.
Maybe this is because of the new release ios 8.1 where after the update it went
recovery mode then i didn't restore, i set up a new ipod.
What's wrong? Is ths bcoz of ios 8.1?How do you do that
lllaass wrote:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPod touch 5th gen won't turn on after updating to iOS 8 using the computer,help!?
On my computer (using windows) I tried to update my iPod touch 5th gen to iOS 8 using iTunes, using this website http://www.gottabemobile.com/2014/09/17/the-secret-to-skipping-long-ios-8-downlo ads-and-problems/ as a guide.
It kept coming up with this error http://support.apple.com/en-us/HT201442 after the update.
Now my iPod won't turn on and it shows the charger with the lightening with an arrow above it pointing to the iTunes logo.
So i plugged it into iTunes but i don't know what i'm supposed to do, any help?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I update my ipod touch 5th gen to IOS 8.1.2, after the update I can't open my ipod.
I'm a newbie here.. I need help.
I update my ipod touch 5th gen, and then after I download the update(IOS 8.1.2). I click the update button and of course the screen went black. After that, I can't open my ipod even I plug it to my charger.
Please.. I really need help..
TIA..Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Problems after iOS 7.1.2 on Ipod Touch 5th Gen
At about 3 hours ago my Ipod Touch 5th Gen turned off on me. It came back on itself, so I accessed the lock screen correctly put my password in and thats where my problems started.
I put in the correct password it accepted it.
The screen then changed to my background screen colour.
Very quickly the screen went black and the apple logo came on (as if it was turning on)
I repeated the process again and I can not access my home screen or any of the apps. It repeats itself.
I've had all my apps crash on me ever since I downloaded the iOS 7.1.2 update.
On the lock screen I can still access the flash light and both cameras?
What I have tried:
Turning it on and off.
Charging it.
Plugging it into iTunes.
Reset where I hold the lock and home button.
Nothing works.
Its a 32gb Ipod touch 5th gen with about 6gb of storaged unused.
I haven't dropped it or done anything unusual.
At the time it crashed I was playing on Farmville 2 app. This app crashes alot could it have something to do with it?
Please someone help me, I've googled it and can't find any problem like mine on here!
I've only had it 7 months.
Thanks,
NadiaThen do this:
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
IPod Touch (5th Gen) and iOS 6.0.1 Update
I'm having some problems with upgrading my iPod Touch (5th Gen) to iOS 6.0.1.
The iPod is currently stuck in the mode where it shows the connect to iTunes symbol. When I connect to it to iTunes on my MacBook Pro, I am asked to 'Restore and Update' which I click. The update file downloads, but as soon as it completes, it disappears and never installs. I then have no choice but to start again which results in exactly the same problem. I don't seem to be able to restore the iPod without downloading the latest software.
Does anyone have any advice?
Thanks.Try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Last, try restoring on another computer. -
I updated my ipod touch 5th gen to iOS 8.2 and left it but when I got back it was in recovery mode with a red iTunes logo and I plugged it into my computer to reset my ipod and it wouldn't do it what do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IPod Touch 5th Gen iOS 6 Updates Screen is Blank (White)
The indicator verifies that I have 15 Updates but my iPod Touch 5th Gen w/ iOS 6 just started showing a blank white screen for the updates screen.
I've tried powering off and back on, resetting (pushing both buttons for 10 seconds), syncing, transferring purchases, and the wifi reset trick, but none of these things makes any difference to the issue.
I saw thousands of posts in various forums that this has been affecting people for over a year. Someone must have found a fix by now that works. This is a new problem to me, but chances are the real fix will work if someone can share it. Any one know? Thanks!Try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Can't activate imessage on my daughters ipod touch 5th gen. Comes back with "An error occured during activation". It was working until I updated to latest IOS version 7.1.2. Managed to update Facetime ok but can't do anything with iMessage. Can anyone help?
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Ipod touch 5th gen won't update to ios 8.1
Hi, i was just wondering why won't my ipod touch 5th gen update to ios 8.1? Whenever i click "agree" to terms and condition, nothing's happening. Mind to help and give any ideas what should i do? Thanks.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Connect to computer and then update via iTunes -
How come my iMessages aren't sending anymore I have a iPod touch 5th gen. It was working and then like 5 minutes later it would not send any messages it always said not delivered even when I press retry and it doesn't send at all I even updated my iOS to iOS 7.04 to see if it will send my iMessages but it won't. I tried to send a message to anyone but it won't work even when before I would be able to send messages but something weird happened that made my messages not delivered. Is there any way I change fix it?
iOS: Troubleshooting Messages
Maybe you are looking for
-
(RXGLER) ERROR WHILE RUNNING REPORT ! URGENT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
HI, I AM RUNNING A REPORT WHICH IS BASED ON A TEMPORARY TABLE, THE DATA IN THIS TABLE IS COMMING FROM LOT OF OTHER TABLES AT RUNTIME THE MOMENT I CLICK ON RUN BUTTON IT SAYS : REP-3301:ERROR OCCURED IN ERROR CHECKING (RXGLER) AND MY NODE GETS HANGED
-
IPlayer no longer loading / playing
Two weeks ago my iPlayer connection from the Goodmans set-top box suddenly decided not to 'play'. I went through the usual sequence of a power off/on reset of the TV, set-top box, HomePlug adapter, BT HomeHub router All other connections in the house
-
Migrating from SRM 7.0 Classic to ECS - Seeking some clarifications
Hello Friends, We are now planning to upgrade from SRM 5.0 to SRM 7.0 and then migrated to Classic to ECS. We have the below challenging points which I need clarification, 1) How do we go about the Taxation and Pricing Part, If we migrate from Classi
-
Programmatically take screenshot and allow user to email it! [iPhone]
I would like to allow the user to capture a screenshot and email the image to somebody from within my iPhone application. The app allows the user to draw stuff. When finished the user should be able to email the drawing (as e.g. a png file) to anybod
-
Ism unable to create new files in my mailbox as when I go into the mailbox as instructed there is no EDIT facility. I am obviously missing something but what?