Restore ipad 2

DO you have to be  on a certain website to restore aplle ipad when u plug the wire in to sync it/

Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2)  If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup  >  http://support.apple.com/kb/ht1766
NOTE:
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

Similar Messages

  • Not able to restore ipad .. error 14

    I gave my ipad ( WIFI + 4G LTE , A1475 ) for a couple of days to my cousin as he had asked for it . When he returned it to me , I got to know that my ipad had been jailbroken . Since I did not want to risk my ipad , I connected it to Itunes and choose to restore from a backup . When I restored , I was still able to find cydia in it . I then opened settings and choose " Erase all settings " ( that restoring to factory settings ) . The problem then started .My ipad was continuously stuck at the apple logo with a progress bar having no progress . So , I put it in DFU mode and connected it to Itunes and it says , " The software on "Ipad" needs to be restored to factory settings or updated." I tried both the option several times on 2 pc, but it ends up saying " The software for the ipad "ipad" was corrupted during download. Please disconnect your device and try again." . I also manually downloaded the firmware and did **** + restore and proceeded . This time it went till half the way of restoring ipad and have the error " The ipad "ipad" could not be restored. An unknown error has occurred (14)."
    Have tried multiple computers, usb ports, and have the latest version of itunes installed.I also searched online and tried that hosts , tinyumberlla , deleting previous ipad software downloads . But no use .
    So , please help me bring my ipad back to normal conditions . I am feeling very bad for my ipad but still have a ray of hope left . awaiting for help .

    I think it is the hardware issue. You can check the details for the error: Resolve iOS update and restore errors - Apple Support

  • HT1222 error 14 restore ipad 2 GSM iOS 5.1.1

    error 14 restore ipad 2 GSM iOS 5.1.1

    I spoke to Apple Tech Support. They were very helpfull and resolved the problem. First I was told to put into airplane mode for 15 seconds then go back to problem. That didnt help but apparently this solves lots of network type faults. Next I was told to reset the network that also didn't work. Finally then i was told to Hold both buttons until the screen goes black, when the Apple symbol returns release buttons. When the pad rebooted this cured the problem and i was able to tether again.
    It seems you try this first on any faults it will often resolve problems. I've added this in hope that it will help others with any type of fault.
    Can I thank you for all your help. Kind Regards Keith

  • An unknown error occurred (-1) while trying to restore Ipad 3 new

    Happy iPad users, I may need some help from you please.
    I’ve got a problem with my iPad new 32 GB WiFi + 4G LTE.
    I bought it just recently in China and was using it for nearly one month without any issues.
    Then at some point i started getting synchronization problems with iTunes and applications that I have downloaded did not run properly or simply won’t start on my iPad. Then I’ve lost cellular signal.
    Trying to resolve the issues I had to reset iPad to factory settings and after that I could not register it with apple. I tried many times with no success.
    Then I went through some internet articles and decided to restore my iPad and finally I’ve got my almost new iPad stuck is restore mode!!!
    I cannot get it out of restore mode and I cannot get it restored.
    When I try to restore it I get the following message:the ipad "ipad" cannot be restored. An unknown error occurred (-1)the ipad "ipad" cannot be restored. An unknown error occurred (-1)
    The ipad "ipad" cannot be restored. An unknown error occurred (-1)
    Here are the things I’ve done so far trying to restore it
    Tried to restore in on Windows XP – no luck, same message
    Tried to restore it on Windows 7 – no luck, same message
    Tried to restore it on MacBook – NO LUCK, SAME MESSAGE
    Tried to use recovery fix option on redsn0w. Did not help. I tried different versions of this program with no success. Maximum what I had is my iPad was entering “white apple mode” after clicking fix restore button.
    Tried to restore iPad from DFU mode both on Windows XP and Windows 7, no luck, same message (error -1)
    I suspect that my iPad may have a hardware issue however I still hope it can be fixed with your help.
    We don’t have an official apple support centers where I leave and I would like to try all the options before I send it to abroad apple support center or to a shop where I bought it.
    Please can anybody help me with advice on how to fix my iPad?
    Thank you all in advance.

    I am facing the same issue, have you had luck getting it solved?

  • HT4623 I trying to update my iPad using iTunes. After connecting to MacBook Pro where is installed all latest software iPad is recognised as iPad, Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error

    There was some updayts for my iPad 4 automatically downloaded. After installing it, the iPad began to restart itself every few minutes.
    I tryed to update my iPad using iTunes. After connecting to MacBook Pro, where is installed all latest software, iPad is recognised as "iPad", Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error occured (3). Tried many times, not results. And now iPad stays only in recovery mode, can't switch it off.  How can I solve this problem please?

    When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547

  • I have installed the latest version of iOS in my ipad but forgot to backup the content, what should i do!!! I don't want my media and other data erased, how can i find back all the data in my ipad? I haven't restore ipad yet, so any others way can be use?

    I have installed the latest version of iOS in my ipad but forgot to backup the content, what should i do!!! I don't want my media and other data erased, how can i find back all the data in my ipad? I haven't restore ipad yet, so any others way can be use? Now my ipad is in recovery mode.

    Once you are in Recovery Mode, it's too late to do any backup. I am afraid you are going to lose your data.

  • Unknown Error Message (9) When trying to restore Ipad 1

    Hi, recently i purchased an iPad 1, and am having problems when trying to restore the device. I put it into restore mode as it was going to sync every app on itunes which i didn't want, so i had to try and set it up as a new ipad again. Now the ipad is in restore mode, when plugged in to my laptop, iTunes does not recognise the iPad until i put it into DFU mode, by holding down the home button and Power button simultaneously, then releasing the power button until the 'connect to itunes' symbols appears. iTunes then recognises the iPad in restore mode and asks me to restore it. When i click to restore, it always stalls just after the 'waiting for iPad' message appears on iTunes, then the error 'Could not restore Ipad, an unknown error occurred (9)' appears.
    I have tried downgrading my firmware and restoring my iPad to v3.2 but then the error 3194 appears. Also by trying to restore the firmware to the newest version using a downloaded firmware also returns this message. After some research on the matter, i read a few people claiming the problem is the USB ports. I have since tried restoring on another laptop and a PC, but still the error 9 message occurres, therefore suggesting it isn't a problem with the USB. My understanding it that it is either a problem with the iPad, or with the Firmware i have downloaded, and iTunes does not recognise this. As further information, the iPad is a first generation ipad which had the latest firmware updated on (v 5.2). It seems to be whenever i try to restore to a firmware i downloaded seperately, i get the error message 3194, and when i just click the restore button, and automatically updating to v5.2 i receive the error 9 message
    Any suggestions as to how i can fix this problem?
    Thanks

    i pulled this from another post on these forums.
    thy this:
    "First try to turn off your iPhone, with the sync cable not plugged in.
    Then hold down the home button (iPhone still off) and plug in the sync cable. (Keep holding the home button until iTunes pops up).
    You have now entered force recovery mode.
    Now try to update the iPhone, using iTunes, as instructed.
    That should work. "
    From: https://discussions.apple.com/thread/2668731?start=0&tstart=0

  • My ipad mini is stuck in dfu mode trying to restore it with ios 7.0.2 it completes the bar(restoring ipad software) then it gives me the ipad could not be restores. an unknown error occured(14)

    my ipad mini is stuck in dfu mode trying to restore it with ios 7.0.2 it completes the bar(restoring ipad software) then it gives me the ipad could not be restores. an unknown error occured(14)

    Are you using a valid Apple charger that came with the iPad?
    Attempting to use a computer USB port, an incompatible charger, or attempting to charge via a wall socket that only receives power from a wall switch — can all lead to a low, or depleted battery condition. Has this iPad been wet, or dropped?
    Verify all of the above, and correct. If the iPad still cannot hold a charge, consider taking to an Apple Store, or authorized service provider to evaluate it.

  • Fresh update of 7.0.4 and freezes on Restoring Ipad Firmware

    Hi i recently did a factory reset in my ipad 2 and it was taking time, so i put the ipad in dfu mode and plugged it in the computer to do a fresh update 7.0.4 and now it freezes on Restoring Ipad Firmware. after about 30 mins get an iTunes error. HELP ASAP

    Hi,
    Im having the same problem exactly.
    i just wannna to update my ipad 2 (GSM) to the newest 7.0.4 and its Stuck on "Restoring Ipad firmware".
    Please any one - HELP!!!!
    thanks,
    C-HiP-ONgo.

  • HT1414 Is it possible to restore ipad or unlock an ipad without loosing purchases?

    Is it possible to restore ipad or unlock an ipad without loosing purchases? I do not own the ipad, it has not been synced to my itunes.

    It is always a good idea to sync your iPad periodically and keep a backup of all documents you've created. Syncing also creates a backup of all your purchased apps. It is quick and easy to get the apps back from iTunes on the computer you sync with. But even if that doesn't work you can always download previously purchased app again without paying for them.

  • How to restore ipad using last backup in icloud

    how to restore ipad using last backup in icloud

    Restore from iCloud Backup
    1. Erase all contents and settings (Settings>General>Reset>Erase all content and settings)
    2. You'll be asked twice to confirm
    3. You'll see Apple logo and progress bar
    4. You'll see a big iPad logo on screen
    5. Configuration start
    6. Set language
    7. Set country
    8. Enable Location Service
    9. Select network, enter password and join network
    10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    11. Selected Restore from iCloud Backup
    12. You'll be required to enter Apple ID and Password
    13. Agree to Terms and Conditions
    14. Select Backup file
    15. You'll see progress bar
    16. Red slider will appear; slide to unlock; step #1 to #16 is fast
    17. Pre-installed apps will be restored first
    18. Message: Purchased apps and media will now be automatically downloaded
    19. You'll see a pageful of apps with Waiting/Loading/Installing
    20. When the restore process is complete, your device will restart. You should connect the device to iTunes to sync data not contained in the backup (such as music, videos, apps, and so on).

  • How to restore iPad without updating?

    How to restore iPad without updating? Why this stupid apple didn't put two buttons for restoring and updating iDevice.. they should include  "RESTORE ONLY"

    Performing a restore from a backup does not upgrade the ios.

  • Just updated my iPad it shut off and now say connect to iTunes and when I connect it it says restore ipad hit that button and says that it can't restore

    Just updated my iPad it shut off and now say connect to iTunes and when I connect it it says restore ipad hit that button and says that it can't restore

    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
     Cheers, Tom

  • ITunes when restoring ipad returns an error 40.

    iTunes when restoring ipad returns an error 40. I'm not the only one facing the same problem. On this site you can find many examples. Device operated properly small period of time. The reason for the error flash nand. I think devices should be replaced

    Sadly this is "normaly" a Nand chip or controller failure - I hope you are still in warranty
    But try  iRecovery  first - hope It helps 

  • IPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help

    iPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help

    Hi ..
    Follow Apple's instructions for recovery mode here >  iOS: Unable to update or restore
    You can restore from a backup.

  • Unable to restore ipad on ios 7.0.4

    well my ipad has a lot of bugs and problems including safari and mail crashing so i decided to try and restore ipad but no matter what when trying to restore ipad 2 7.0.4(GSM) it always has this error measaege error 3014 any ideas to fix this?

    You can't restore to iOS 7.0.4 since it is no longer signed. You can only restore to iOS 7.1.1 which is the current iOS level.
    See also here: http://support.apple.com/kb/ts3694#3014

Maybe you are looking for

  • Link cost a lot of time and memory, anybody know why

    Does anybody have meat this problem. doring the linking time, it take a lot of memory and time. any one know how to solve this problem.

  • Counting Requirement (Counting PO line items wrt PO No)

    Hi All, We have a requirement here . Suppose there are 2 Purchase orders Y & Z . "Y" purchase order has  5 line items as 10,20,30,40,50 . "Z" purchase order has 7 line items as 10,20,30,40,50,60,70 . now i want to count the number of purchase orders

  • Assign Bank account to the Customer

    Hi, How to assign bank account to the customer?? in AR or CM???? pls help me n step by step fashion... thanks a lot n advance..

  • Need Help with setting up this Filter

    Hi, I need help making a filter sound like the one used in this youtube song. I tried setting it up but I've had no success; even though I know for a fact that this filter was made in Logic Pro 9 according to the maker of this song. I think there mig

  • Informatica Workflow fails because of TEMP tablespace

    Hi, I am trying to do a Complete Oracle 11.5.10 load. However my execution plan fails because the SDE_ORA_Payroll_Fact fails. The error in the session log is as follows: READER_1_1_1> RR_4035 SQL Error [ ORA-01652: unable to extend temp segment by 12