Restore iPod touch from recovery mode.

When trying to restore my iPod touch from recovery mode I get the following message: The “iPod” could not be restored. This device isn’t eligible for the requested build." I have tried the recommended solution by apple but still no good. Help any one?

See:
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
How to Fix iTunes Error 3194?
How to solve iTunes error 3194 in 10 simple steps
try on another computer

Similar Messages

  • How to restore ipod touch in recovery mode with passcode in itunes

    StylStyle
    My ipod touch went to recovery mode after I tried to reset its network settings. I tried to connect it to itunes but it does not want to connect because I have a passcode and my ipod touch wont let me enter it so I could unlock it. Can somebody help me please? Thanks so much!

    Placing the iPod in DFU mod and then restoring usually resove the passcode problem.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    However, you may have othr problems since it went into recovery mode unexpectidly. Try restoring to factory defaults/new iPod if necessary.

  • I have had to put my ipod touch in Recovery Mode and tried to sync it with itunes but it wont restore itself. What can I do?

    I have had to put my ipod touch in Recovery Mode and tried to sync it with itunes but it wont restore itself. What can I do?

    http://support.apple.com/kb/TS3694#error3194
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • TS3694 how do you solve a error 1015 when restoring a iphone from recovery mode?

    how do you solve a error 1015 when restoring a iphone from recovery mode?

    This error is generally exhibited when someone tries to downgrade iOS. See this support document http://support.apple.com/kb/TS3694
    This is the part you are looking for.
    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported. 
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • HT201210 I was just trying to restore my iPhone3G from recovery mode, but always received error code 1015. What shell I do to avoid this code?

    I was just trying to restore my iPhone3G from recovery mode, but always received error code 1015. What shell I do to avoid this code?

    Your phone is probably jailbroke

  • Why does it take so long to to restore ipod touch from a backup.

    Why does it take so long to restore ipod touch from backup in itunes via usb cable?

    What is you internet speed
    How big is the SSD on the iPod (8GB, 16GB, 32GB, ect.)
    My 8 GB on was restoring for about 5 min.
    Try disconnecting it and see if there is a picture of a USB to iTunes

  • IOS 5 update forced ipod touch into recovery mode which I can't get it out of! Help please!

    Hi, I recently updated my ipod touch 3rd gen to ios5 (as prompted by itunes - assumed a standard software update). Immediately afterwards, my ipod went into recovery mode, and initially itunes recognised this and tried to restore it unsuccessfully. Not any more! Now it is either off, or displays the 'connect to itunes' logo when I connect it to the computer via USB lead.
    I've tried uninstalling and re-installing itunes but this hasn't helped it recognise the ipod.
    I don't think I've managed to go 3 months without having to do something like reinstall the drivers etc on this ipod, don't know why i expected this update to be any different!
    Can anyone help?
    Thanks in advance!

    Try disabling all security software and firewalls, then try again.
    Or try from a different computer.
    This error is a pain in the butt and a new issue, too. I'm sorry.

  • TS3694 How do I restore my iPhone from recovery mode when I get an error 3194 message

    I am trying, unsuccessfully, to restore my iPhone 4 from recovery mode. When I attempt to restore through iTunes I get a message telling me the process cannot be completed because of an error 3194. There is no documentation or information on what this error means - and how to restore the phone when this message appears. Can anyone help?

    This usually means you previosly used an iPhone hacking utility such as tinyumbrella, altering the hosts file on your computer, and blocking access to the apple server, gs.apple.com.
    "Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service."
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • IPod touch in recovery mode but there are no backups for the restore

    I recently switched from a Mac to a PC. When I connected my iPod touch to the PC, it errored trying to do a backup and no backup was created. My iPod is now in recovery mode and when I try to restore I get this error message: 'The iPod "iPod" could not be restored. An unknown error occurred (6).' What can I do?

    Did you try to reset the ipod by holding the sleep and home button until you see the Apple logo?
    Is your ipod charging if you use the adapter? If yes, charge it and try again to connect in recovery mode.
    In order to pass the passcode you'll have to restore your ipod "as new ipod" because the passcode info is saved in your backup. Restoring and backup: http://support.apple.com/kb/HT1414

  • Help with iPod Touch in recovery mode

    I am trying to help my sister with her daughter's iPod touch. The end goal is to update to iOS6. It is a fourth gen iPod Touch. I plugged it into iTunes (iPod was still iOS V4.something or other) and it said there was an update availalbe. I clicked Download and Update. Got a message about the update deleting all the apps since this iPod had been synced with another computer (my sister has a new computer since she last synced the iPod -- the old computer is no longer available). I cancelled out of the update and did a transfer purchases and then backed up the iPod. I then started the iOS 6 update again. It downloaded the update and then it said "backup up iPod." At that point I left so I don't know what happened after that but it is now saying that iTunes has detected an iPod in recovery mode. My question is this: if we let it do the restore (which is the only option), will I be able to go back into iTunes and restore from the backup that I took MANUALLY (not the backup that it did as part of the iOS 6 update)?
    Thanks.
    Lisa

    Yes, you will be able to restore from the backup you previously made. See:
    iOS: How to back up

  • Help with an iPod Touch in recovery mode?

    4th generation iPod touch... So the iPod was running perfectly fine. Today I tried to update the iPod software, but it didn't work. I went online to try to figure out why, and I found that I should try updating the iTunes software, so I did. This update did not work either, and after iTunes showed me a message saying that the update failed, my iPod entered recovery mode apparently. Pressing and holding the top button or both buttons at the same time does no good. I would have tried changing my iPod's drive letter, but I can't even find the iPod in Control Panel to do so. I've since been able to successfully update iTunes to the latest version, but even upon restarting my computer, nothing has changed with the iPod. Is there any hope of saving it without giving in and restoring it? Any suggestions would be appreciated.

    I recently had a similar problem.  Try disconnecting the cable to the iPod.  Open iTunes and then reconnect the cable holding down the home button.  When this doesn't work (it didn't for me), do a complete uninstall/reinstall of iTunes, QuickTime, Bonjour, etc)  http://support.apple.com/kb/HT1925 .  You then should be able to restore the iPod.  After restoring, I had to restore again from my latest backup to get all my apps and data back.  Good luck.

  • 2nd Gen. iPod touch in recovery mode

    My fairly new 2nd Generation iPod touch goes into recovery mode almost every week. I'm started to get anoid because if I go on a trip without a computer, and it requires a restore, it's useless.

    Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
    Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive and iTunes may exhibit strange behavior in relation to the iPod.

  • IPod touch in recovery mode and isn't recognized by iTunes

    Reply please.

    Try DFU mode and then restore
      How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HELP! Need to put iPod touch in Recovery mode...

    My brother has an iPod touch (don't know which version but it's about 1 year old) and has forgotten the passcode for it.
    Unfortunately, we're now using a new installation of Windows (and hence, iTunes too) so we cannot resore it by plugging into it's "home PC".
    I have seen a few tutorials on how to put the iPod in Recovery mode, but none have worked. Does anyone have any suggestions? HELP PLEASE!

    Try this program.  There are others too.
    RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov

  • Please help - iPod touch 4g recovery mode loop

    Today I decided I'd update my iPod, however once done I got the message 'iTunes has detected iPod in recovery mode, you must restore this iPod before you can connect it with iTunes'. However when I do restore it it also wants me to 'restore and update' and after downloading the update for 15 minutes nothing happens. Everything still stays the same and when I replug my iPod it just wants me to download the update all over again.
    This is driving me mad help

    Look, calm down, I have been through a boot loop also because I was tampering with something I shouldn't have been while in SFTP... Haha.... All you have to do is put it in DFU mode to restore. First connect it to the PC, open iTunes, then you hold down the sleep button, count to 3, WITHOUT RELEASING THE SLEEP BUTTON, you hold down the Home button and count to 10, then take your finger off of the sleep button and keep holding the home button, then your PC should start downloading the apple recover drivers and iTunes will give you a message prompting you that it has detected an iPod in recovery mode, press restore, and voilla!! DFU fixes just about any problem besides outright smashing your device with a hammer. As an important note, make sure your iTunes is at the current version, as I ran into an error (21) countless times because of an older version.

Maybe you are looking for

  • Itunes 10.5 takes forever to open and does not Sync my iPhone 4S

    I used to have the iPhone 4 with iTunes 10.4 and everything worked fine except that it takes 5 minutes exact to open iTunes. I just expected this but it least it synced fine. I now have iPhone 4S and iTunes 10.5 and it still takes 5 minutes to open b

  • Problem with my E52 gallery

    hi guys,  i recently got a new e52, its all grt except for d fact tat i have got few pictures loaded on ma 4gb memory card tat i inserted into d phone which are not shwn in the gallery, but they r present in the card when viewed thru file manager the

  • Jsp templates using tiles

    hi all, i want to use Tiles in my application for designing jsp templates. how can i use tiles?is there any best tutorial with complete example on Tiles in Jsp templates? your suggestions are appreciated. regards and thanks in advance

  • How do I invert meter in labview with needle pointing downwards

    Hi, I need to invert meter in labview with needle pointing downwards . Can somebody guide me?

  • Where are stored electronical documents attached from PC

    Hello, I'm working on the Archive link and attachment link to SAP object as outgoing invoice (VF02), incoming purchase order (ME22N). We have implemented a SAP content repository. I well understood when I attach a document with "Store business docume