Restore old images that were created with Netware ZDM

We have issues to restore old images that were created with ZDM 7 on NetWare. PXE booting works, everything looks okay, but when we should see the progress bar of the imaging process, we just stuck.
Creating a new image works fine. Restoring the newly created images also works fine. It is only restoring the old images that were creted with NetWare ZDM.
Should this cross platform imaging work at all? Assuming that we are on the same ZDM version level on both environments?

tcsabina,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

  • Can't open projects with Imovie 5 that were created with earlier version

    I can't open my Imovie projects that I created when using Mac OS 9.2 now that I'm using Tiger and Imovie 5.
    I'm not sure what version of Imovie I created them with. Do I need to find an earlier version and open them in the classic environment, or is there some way of converting or importing them?
    iBook G4   Mac OS X (10.4.2)  

    Theoretically iMovie 5 can convert old projects, but projects created in Mac OS 9.2 can be quite difficult, for OS 9 is very different than OS X. More about that here:
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=1677339
    Your best option is to use the version of iMovie that you used originally to edit the project. If the projects are really old, that may require starting up your Mac in Mac OS 9 (instead of running iMovie in the Classic environment, which is Mac OS 9 running inside Mac OS X.)
    Your best solution may be to boot up in Mac OS 9 and use your old version of iMovie to export the project back to the camera, then boot into Mac OS X and import the tape into iMovie 5.
    If you don't have a camera, export to a Full Quality DV movie, then import that movie into iMovie 5.
    The camera will (probably) deliver the clips to iMovie 5 as clips, while the export to a Full Quality DV movie will not.
    By the way, to see which version of iMovie last edited the project, drop the project file on the TextEdit icon in the Dock. The version is shown at the top of the file.
    iMovie 2.1.2 was the first version to run in OS X, I believe. The last version to run in OS 9 had the same version number, unfortunately.
    If your Mac doesn't let you start up in Mac OS 9, then say more about exactly what happens when you try to convert the project. Do you get error messages? What are they?
    Karl

  • I have an old shuffle that I created with a different email address that I no longer have. is there a way to add these songs to my new account

    I have an old shuffle that I still use with many songs. I created this account with an old email address that I no longer have. Is there any way to transfer these songs to my new account so I may purchase more songs and still use my shuffle? Thank you!

    Basically, no, but as long as all the music is in the same iTunes library and it doesn't contain protected content from more than five Apple IDs, you don't need to. If desired, click here and ask the iTunes Store staff for assistance.
    (124362)

  • There is a lot of e-learning educational courses that were created with flash technology that works great.  Why doesn't Apple adjust their ipad operating system so it is compatible with accepting flash courses?

    To have to recreate courses in html5 just for apple mobile products is not practical.

    DonatoP wrote:
    I just read that there is a browser Called Photon that is a Flash Player Browser for iPad that you can use with your ipad that will allow you to view flash.
    http://itunes.apple.com/us/app/photon-flash-player-browser/id430200224?mt=8
    Has anyone tried this with flash elearning courses?
    Since the effectiveness of so-called Flash browsers on iOS depends on compatibility with the specific source material, there is really no way anyone could effectively advise you on this. The only way to find out it to try it.

  • Can you open with Pages documents that were created in a 2004 version of Microsoft word for Mac?

    Can you open in Pages documents that were created in a 2004 version of Microsoft Word for Mac?

    Pages '09 will open .doc files from Word 2004. The Mac OS is not what is in question. Pages '09 opens Word 2004 documents and if the same version of Pages will run in Lion and in Mountain Lion ..... Thats all that matters.
    I trust you were using MS Office 2004 and would now like to buy Pages?

  • Pages tells me I need to upgrade to 5.0 to open documents from iCloud.  When I go to the mac app store it says pages 5.0 is installed, but Pages says it's running 4.3.  I just want to open documents on my mac that were created on my iPad.

    Pages tells me I need to upgrade to 5.0 to open documents from iCloud, but the mac app store says its already installed and won't let me upgrade.  when I check the version of pages I am running it says 4.3.  I just want to be able to open documents on my mac that were created on my iPad.  How can i get Pages 5.0?

    Welcome to Apple Support Communities
    You already have got Pages 5.0, but you still have got Pages 4.3, so Pages 4.3 is being opened instead of the newest version, being this the reason why you get a message telling you to update Pages to the most recent version.
    If you don't need the old version, open a Finder window, choose Applications in the sidebar and delete the old Pages icon or move it to an external drive. I don't recommend you to do this, as users are complaining about the lack of features of the new version.
    Instead, what you can do is to put the new Pages icon in the Dock by dragging it from the Finder window to the Dock, so you can open the new Pages version from the Dock and you can open all your documents with it after opening the application

  • How do I use icloud to restore my documents that were in Pages? Pages got stuck in "waiting" to update and when nothing else worked I deleted it and reloaded Pages. I don't want to restore everything just my Pages documents.

    How do I use icloud to restore my documents that were in Pages? Pages got stuck in "waiting" to update and when nothing else worked I deleted it and reloaded Pages. Everything I can find is about wiping everything out and restoring everything. I don't want to restore everything just my Pages documents (and numbers and keynote that also locked up during updating).

    What I meant is turn off Documents and Data in iCloud in OS X. Keep it on on your iOS devices. iCloud will sync documents between the iOS devices and make them available on the iCloud web site, but it won't mess up iWorks' open and save dialog boxes. It also won't assume that you want all your documents in iCloud, which I think is undesirable anyway.
    Keep iOS and OS X separate, and use the web site to move files between the two as necessary.
    iOS iWork is different from OS X iWork. There are fewer fonts on an iOS device. iOS iWork programs have slightly different feature sets than OS X iWork programs, and the file formats are different. iCloud automatically converts the file format when necessary, but if you make a habit of saving things directly to iCloud, you are limited to the lowest common denominator between the two versions of iWorks. So why would anyone want iWork on the Mac to open and save documents on iCloud by default?
    If you want to store files in the cloud and sync them on your Macs, SugarSync is a much better solution. It lets you choose your sync folders, it doesn't make you reorganize your files, it lets you sync all file types, it doesn't convert files to a different format and back, and it stores everything in the cloud, too. Just the simle act of saving a file backs it up and syncs it. I wouldn't live without it. iCloud is best with iTunes purchases and synchronizing Mac settings and iOS files; I woudln't live without it. The two make an unbeatable combination.

  • After upgrading from acrobat 9.5 to XI pro my users have complained on slow typing when filling in form that were created in version 9.5?

    After upgrading from acrobat 9.5 to XI pro my users have complained on slow typing when filling in form that were created in version 9.5?
    The issue is they type but there is 2 second delay when it appears in the field.
    Windows 7 64bit

    I see, I misread your reference to Reader 11 to mean you were using Acrobat 11, but it looks like it worked out anyway.
    The base-14 fonts are special in PDF because they are guaranteed to be available even if they are not embedded. If you select a non-base-14 font for use with a form field, the entire font usually gets embedded, since each glyph it contains has to be available for use with the field. This can take up a lot of space if you do this a lot, and the space isn't reduced if you change back to a base-14 font later because the internal reference to it is not removed. This is caused by the bug I mentioned.
    In your case, however, the entire font doesn't get embedded because fonts like it (e.g., large asian fonts with a lot of glyphs, Arial Unicode) would take up too much space if fully embedded. If it did, a 100KB PDF could bloat to 20MB with that one change. Instead, users are expected to have such fonts installed on their system, which is why you were prompted to install the font pack. This despite the fact that the font was not actually used by anything in your document, it was simply the orphaned reference to it that triggered this. This should get fixed in Acrobat eventually so this type of thing doesn't happen again.

  • "Read items that were created by the user" and inconsistent permissions

    Hi!
    I have enabled the option "Read items that were created by the user" and "Create items and edit items that were created by the user" in the advanced settings of a list. Indeed when a user creates an item in that list, that item is visible
    only by that account and other accounts cannot see it.
    However when the user opens the "Shared With" dialog he/she sees all users there, giving him/her the impression that the item is visible to everyone! Why is that? This is very confusing since this "Shared With" feature is the only way
    for a user to tell who can see an item.

    Let it make it more clear. User A creates Item 1. Users B creates Item 2. When User A sees the contents of the list he sees Item 1 only. When User B sees the contents of the list he sees Item 2 only. As expected.
    The problem is that if User A selects Item 1 and then clicks on 'Shared With' button on the ribbon, he will get pop up that indicates that the Item 1 is Shared with User B. Which is not true since User B cannot see the item. So User A wrongly assumes
    that Item 1 is Shared with User B!
    Dimitris Papadimitriou, Software Development Professional

  • What do i do when iPhoto Deletes my recent pic's all the way to 2010????? i opened the program and it said i needed to update my library otherwise i wouldn't be able to view the images that were not updated-- and now they are gone!!!!!! WHat do i do!!!!!!

    what do i do when iPhoto Deletes my recent pic's all the way to 2010????? i opened the program and it said i needed to update my library otherwise i wouldn't be able to view the images that were not updated…… and now they are gone!!!!!! WHat do i do!!!!!!  Is this some type a virus???? my mac is protected!!!!! tried to chat with an IT person but they keep asking if its like a tech problem and it is just iphoto

    You should get your keyboard checked as it's repeating  on a lot of keys and makes you look silly.
    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Cannot See fields on Adobe 8.0 that were created in 6.0

    I had a file sent to me that was created with adobe 6.0. The file has fields filled in, but when I open it in 8.0 they do not show up. I verified that they were in fact filled in, and saved and then emailed.
    All windows xp.

    I have a client who recently experienced what appeared to be a permissions issue when, after editing some PDF/A files that we provided to her using Adobe Acrobat XI Pro 11.0.07 (on a Mac workstation running OS X 10.7.5), she tried saving them to a server (running Mac OS X 10.8.1) where she had stored our PDF/A files, attempting to overwrite the original PDF/A files.  She was able to successfully save the edited PDF files to her Desktop, but when she tried dragging/dropping the edited PDF files from her Desktop to the server, attempting to overwrite the original PDF/A files, again she was presented with a permissions error.  I read another thread here saying that there could potentially be some issue with Apple/Mac Mail holding on to files that were sent as attachments, but she validated none of the PDF/A or edited PDF files were e-mailed, so I wanted to survey the community to find out what you all think may have happened.  The original PDF/A files that we provided to her were created on a system running Windows Server 2003 and Windows XP.  For the record, I'm a bit of a novice when it comes to understanding all of the intricacies of PDF/A files AND Macintosh operating systems/applications.

  • Troubles finding activities that were created by others.

    Hello experts,
    I'm having troubles finding activities that were created by others.
    I should mention that we've upgraded our system to EHP1.
    This problem occurs only in our upgraded system.
    In order to find the activities i am using BTQAct search object,
    using object id.
    In case that i'm logged in to the system with the creating user I am
    able to find this particular activity,
    in case that i'm logged in with any other user, I am not able to find
    this particular activity but, I am able to find any other activity that was created by me.
    To remind you, I had no problems finding any activity with any user
    and NOT depending who is the creator of that specific activity.
    Why is this happening?
    What can I do to fix this?
    Thank you very much,
    Maor.

    Thanks for the suggestions, Erland.  Unfortunately, I checked and there weren't always schemas added for these users as some were sysadmins or db_owners which is the exception to this feature in security.  Also, their SIDs don't match up with any
    existing SID values  in sys.database_principals or sys.server_principals.  The groups to which they belong are there, but these SIDs that aren't able to be resolved are different, and created for the individual user.
    The only way I've found to identify who owns an object is when it's a job and I use the system function SQLAgent_SUSER_SNAME() which will return the actual domain\account name of the person who owns the job.  This object only exists in msdb and SUSER_SNAME
    doesn't work in user databases.  There might be some other system function out there I haven't stumbled on yet but the two system tables you mentioned unfortunately rarely help.  Let me know if you have any other ideas?  And thanks for the response!

  • On CS5, how can I recover jpeg images that were Batch Renamed prior to removal from my flashcard?

    On CS5, how can you recover JPEG images that were accidentally Batch Renamed prior to removal from a flash card? Is it a total lose or can they be saved somehow?

    If they were renamed on the flash card that is a poor practice.  If renamed in Bridge the old names can be recovered it you have checked "preserve original name in XMP".  If not you are out of luck.  But you still have the images correct?

  • How can I play Power Point DVDs that were created on my mac 7-10  years ago?

    I cannot play DVDs that were created 7-10 years ago using Power Point for Mac.

    What do you mean Keynote "son't open the DVDs"? That doesn't make sense. It's not up to Keynote to open the DVDs. The file that are ON the DVDs, yes. The DVDs, no. What kind of files are they, exactly?
    Try downloading Open Office and see if you can open them with Impress, the presentation program included with the Open Office package.
    If that won't work, you can get a 1 month trial of Office365 from Microsoft. It's $9.99 a month after the trial ends.

  • Why can't I play paid purchases that were purchased with an E mail address no longer used a

    Why can't I play paid purchases that were purchased with an E mail address no longer used and the purchses won't sync to my I Pod. I can see them in my I Tunes library but when you click on the song it says Please Authorise this computer showig an old E Mail address  and it wont work. ???

    The Apple ID to authorize is very old, ( I don't have password) so I use my NEW apple ID and password
    Why do you have a new AppleID and passwortd?
    Just update the old one and continue to use it.
    You can get your password and edit the info here -> http://iforgot.apple.com/

Maybe you are looking for