Restore Old info on New Hard Drive

Greeting,
I recently sent in my Powerbook G4 (Tiger) to the depot center in order to get my screen fixed (screen was completely dark). The good news is, they fixed the screen and upgraded my hard drive. The bad news is, there is nothing on the updated hard drive.
Prior to sending the unit out, I did two backups to an external drive:
1. Backed up the entire drive using .mac backup utility
2. Created a clone using disk utility
(these were the only two options I had, since I could hardly see the screen and I have used these utilities before)
My first question is, what would be the best way to restore the new hard drive with the backups that I have?
My second question is, I briefly powered up the unit and saw the welcome screen. I assume that I will have to go through the set-up again in order two complete either of the above options. Is this correct?
Any and all help is greatly appreciated.

Connect the external drive and restart the computer. After the chime press and hold down the OPTION button until the boot manager screen appears. Select the icon for the external drive and click on the large right arrow button.
After startup use Disk Utility to clone the external drive to the new internal drive:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.

Similar Messages

HELP!!! CAN'T RESTORE OLD CATALOG TO NEW HARD DRIVE

July 12, 2010
Hello,
Thank you for any help you can give with this rather desperate problem.
I have installed a replacement hard drive in my Dell Windows Vista laptop and reloaded Adobe Photoshop Elements 6.0. I am unable to reconnect Elements with my old photo organizer catalog.
Thus the system says I have Elements installed, with a catalog with zero photos in it. When in fact I have 12,000 fotos all captioned, dated and tagged for the Elements organizer.
Elements HELP has nothing about reconnecting to an old photo catalog.
Is it possible (???) that Elements does not keep the catalog separate from the program itself – so that when the program itself is lost in the switch to a new hard drive, the catalog is also lost (unless the user made a backup somewhere)?
Anyway, here’s what happened:
I had made a fairly recent backup of the catalog to an external hard drive, so I copied that backup onto my new hard drive. Then in the Elements Organizer, I clicked on File; Restore Catalog from CD, DVD or Hard Drive. In the window that popped up, I directed it to the backup file (Backup.tly) and specified a location for restoring files and catalog. Then I clicked on Restore.
Up came a window that named one of my 12,000 fotos and said these approximate words “File already exists, do you want to overwrite it?”. I finally said Yes, and then it went on to another of my 12,000 fotos and asked the same question. I assume it planned to go through all 12,000 fotos, but I can’t imagine why.
But instead of continuing, I then got a window that said, “Error encountered while restoring catalog. It is recommended that you contact your disc drive manufacturer and upgrade to the latest available firmware for your specific disc drive before trying again.” (By the way, all my other programs are working fine on the new hard drive.)
I sure hope someone out there can tell me what’s going on. Thank you so much.
Don

You copied the backup onto your new hard drive? Yes or no? Where was it before?
Then did you try to restore to the exact same location where you placed the copy?
HEre is the proper way to restore a catalog: http://kb2.adobe.com/cps/402/kb402894.html
By the way ... you say: "Elements HELP has nothing about reconnecting to an old photo catalog." I disagree.
You say: "Is it possible (???) that Elements does not keep the catalog separate from the program itself" not only is it possible, but Elements does indeed keep the catalog separate from the program itself.

Putting old info in new hard drive

I bought a black macBook and I was wondering if I wait until i can't hold anything more in my hard drive and change it 8 months from now, is there an easy way to import my old hard drive info onto the new one in an easy way?

Even better than target disk mode is cloning it over with a program like SuperDuper. It will copy every last bit and byte on one hard drive over to another hard drive.
I did that with my iMac when I upgraded the stock 160GB drive to a 320GB unit. When the cloning was finished, everything was exactly as it was on the old drive, but with a whole lot more free space.

Trying to restore after getting a new hard drive. I can see the backup on the Time Capsule and on the correct date but it is Greyed out. That is it wont let me open it and restore the machine. Have tried also Migration Assistant, no luck.

Trying to restore after getting a new hard drive. I can see the backup on the Time Capsule and on the correct date but it is Greyed out. That is it wont let me open it and restore the machine. Have tried also Migration Assistant, no luck.

https://discussions.apple.com/thread/5210788?tstart=0
At startup hold down the Command+Option/Alt+r keys until you see a globe on the screen. Then use disk utility to partition and format the drive HSF+ and then select Reinstall Mac OS X. whatever version of OS X that originally came on your system will be installed and then you can upgrade back to Mavericks.

My hard drive failed. How do I restore library on a new hard drive?

My hard drive failed. How do I restore library on a new hard drive?
Thanks.

if music was purchased in itunes you can restore as for cd's well if in ipod go here http://www.getsharepod.com/

Moving old account info to new hard drive

I installed new hard drive, actually 4, and reinstalled Leopord on one of them, actually 2 since I set up a raid 0. I want to move some parts of my old account, which was also 10.5.8, over to new setup and migration assistant won't let me pick and choose, at least not the ones I want. MA won't even let me merge my old account with my new one, they both have same name. I already moved mail by moving mail folder from library and the com.apple.mail.plist to the right folder on new setup and it works fine. Now I want to move ical, safari bookmarks, address book, iphoto, iweb and imovie info, as well as system preferences. What files and folders do I move to make this happen?
Thanks.

See the following for suggestions.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.

Old data to new hard drive ...

I am about to upgrade both the RAM and hard drive in my early 2008 (black) macbook.
YIKES! I've never even changed the battery in a computer! Actually, though, I'm not so worried about the physical aspect but about the intelligence aspect.
I've purchased an enclosure for the current (old) HD and plan to do the restore from there. That was the suggestion of the very helpful people at Other World. However, just in case...
I have done a Time Machine backup to my WD MyBook. At least I hope I have. So, one question is:
How do I know that I've got a complete clone on my external drive?
When I look at "restore files" I don't see all of the applications, etc. But it doesn't really seem to give me the option to see that. I'm using WD SmartWare. (This may be a question for the WD boards but I'll ask it here too.)
Second question is - I know that when I turn on the computer again with its new HD I need to reinstall OSX. 10.5.8 is what I have but I'm assuming all that's on the disc is 10.5. Will I be able to just get the updates by going to software update? I am assuming that, like most things Apple, I will insert the disc and it will walk me through it? And then I plug in the old drive and manually just pull it all over to the computer again?
Third question is - while I'm doing this, does it make sense to go up to 10.6? and, if I do - when do I do it? Do I go to the store and buy a disc ($30?) and use that instead of the one that came with my computer? Or do I start off with the 10.5 and then go on line and update to 10.6?
Any advice appreciated.

Hello again Shadow,
The way I do this is to:
1) Install your new hard drive into your iBook
2) Get your iBook reassembeled
3) Place your old hard drive in your firewire enclosure
4) Insert your install DVD into your iBook and restart with the C key held down. When the installer launches, select your language in the first pane, click 'continue' and in the upper dropdown menu in the next page select Utilities > Disk Utility. After DU is open, select your hard drive from the list of volumes on the left (the very top one), and then click the 'Partition' tab to the right. Then select 1 partition (normal) and make sure that you have 'Mac OS Extended (journled)' selected in the lower section. Then click 'partition'
5)Quit disc utility, which brings you back to the installer. continue with your installation of OS X. In one of the first steps you will see a button on the lower left which says 'options' click on that and make sure that the option 'Installs OS X for the first time' is selected. It will normally be selected by default with a new drive.
6) After the installation, the Migration Assistant will ask if you would like to transfer your information from another mac. click yes then follow the instructions. but instead of using another mac, connect a firewire cable from your enclosure with your old hard drive installed. The installer will think that this is another mac and will transfer all of your account information and user files (everything!)from your old drive to your iBook's new drive. Just diconnect when it says to and complete the installation sequence.
You're done!
Check back again if anything is unclear.
Randy
Message was edited by: DesertSage

Old Domain Files- New hard Drive

Apple just replaced my 120gb hard drive in my Powerbook. Successfully transfered files from an external bootable clone. The clone was about a month old, but I also have regular backups on external drives, including iLife backups. Trouble is, I tried to use "Backup" to restore the incremental backups but the program seems to hang indicating that it is locating backups??? I'm looking right at the backups on two different external drives. I even clicked on the incremental backup to start the "Backup" program.
Please help getting the incremental backups added to my existing hard drive so that my files will be current? I'm very concerned that my domain files are not current, so I can't publish any new iWeb work. The Domain files on the new hard drive are not the most current--publishing will actually erase some of the published work currently on the web. Anyone?

Double clicking the incremental backup file should bring up the Backup 3 window. After a short pause you should get another window - iWeb Backup - or whatever you called your backup plan.
This window has a "Restore" button.

Time machine restore-just got a new hard drive, used migration assistant to restore to time machine but cannot find files.

Sounds like i have a similar story to another user out there. 5 year old dropped my computer and hard drive was gone.
I just got a new hard drive and used Go-utilities-migration assistant to restore with time machine-- it
took several hours and seemed to be doing ok, but when done none of the files/photos/ect are available?
I did however find a back up on my Time machine labeled "sparse bundle"?
How do i get my files restored on my computer? Thanks!

Try restoring the specific files.
http://pondini.org/TM/15.html

Have Old Hard drive and want to move old data onto new hard drive in imac.

I am trying to get my files off of an old hard drive. I have it hooked up through a sata drive. I am able to access all the programs but for whatever reason I am unable to access any of the files, i.e- 1,00's of pictures, videos, music, and documents. Is there something else I need to do in order to get the files, or is it possible that all the programs could still be on it but the files are just missing? In the current Sata it only has two plugs but on my hard drive it looks like there is another place to plug something in.

Hello again Shadow,
The way I do this is to:
1) Install your new hard drive into your iBook
2) Get your iBook reassembeled
3) Place your old hard drive in your firewire enclosure
4) Insert your install DVD into your iBook and restart with the C key held down. When the installer launches, select your language in the first pane, click 'continue' and in the upper dropdown menu in the next page select Utilities > Disk Utility. After DU is open, select your hard drive from the list of volumes on the left (the very top one), and then click the 'Partition' tab to the right. Then select 1 partition (normal) and make sure that you have 'Mac OS Extended (journled)' selected in the lower section. Then click 'partition'
5)Quit disc utility, which brings you back to the installer. continue with your installation of OS X. In one of the first steps you will see a button on the lower left which says 'options' click on that and make sure that the option 'Installs OS X for the first time' is selected. It will normally be selected by default with a new drive.
6) After the installation, the Migration Assistant will ask if you would like to transfer your information from another mac. click yes then follow the instructions. but instead of using another mac, connect a firewire cable from your enclosure with your old hard drive installed. The installer will think that this is another mac and will transfer all of your account information and user files (everything!)from your old drive to your iBook's new drive. Just diconnect when it says to and complete the installation sequence.
You're done!
Check back again if anything is unclear.
Randy
Message was edited by: DesertSage

HT203167 external hard drive died and have new one. how can i get my old purchases onto new hard drive?

help! my external hard drive died. have tons of tv shows and movies on it. how can i get my old purchases from itunes onto my new hard drive?

Just plug it in and sync it.
(60463)

Restore time machine to new hard drive?

My hard drive just died and will need to be replaced. Once I have a new hard drive, how can I restore all the backed up contents onto my new drive? Thanks.

William Huisking1 wrote:
I have the same question but wanted some clarification. If I restore using this technique, will my new hard drive in my computer be fully up to date with all my Time Machine applications, data, etc.?
yes.
The reason I ask, is that I do use superduper as an alternative to make sure I have a full disk image that is up to date. If Time Machine accomplishes the same thing, then perhaps I don't need superduper.
it's a good idea to have both.
My Time Machine Backup Disk Drive IS a firewire hard drive. Could I boot from that and then restore?
you can't boot from a TM drive. if you want to do a TM restore you have to boot from the install DVD. If you want to restore from a SD clone you can boot from this clone and clone it back to the main internal drive. i would probably choose that route but it's up to you.
Thanks so much.
Skip
Message was edited by: V.K.

Downloading my old library to new hard drive?

Hi guys, I'll say sorry in advance, I'm a new user and completely useless with a computer.
Here's my problem, My hard drive recently packed in on me, so I had to buy a new one. I'm currently downloading Itunes again and was wondering if there is any way to get my old library and purchased albums onto this new hard drive?
Any help or support would be greatly appreciated :)!

You're going to have to find someone who can extract data from a broken hard drive. They'll more than likely have to take it apart and do whatever it is they do to get lost data off a hard drive. This type of procedure is not cheap, either.
A good place to start would be http://www.diskdoctors.com. For your average hard drive, data recovery is going to start at about $500 and can range all the way up to about $3,000. So, if your hard drive has crashed, you're looking at a hefty expense.

Getting old data onto new hard drive

I've backed up my current hard drive and I will be replacing it with a new one tonight. My question is once I do this, do I just plug in my external drive with the back up and then...? How do I get my old data onto the new hard drive? Thanks!

How did you back it up, Surfer?
If you "cloned" the existing internal to the external, using SuperDuper or Carbon Copy Cloner, then you simply boot from the external drive, use Disc Utility to make sure that the new drive is formatted using the GUID partition scheme and HFS(extended) file system (and reformat it if it is not), and then clone back to the internal.
If you backed up using Time Machine or Disk Utility, then it will depend on what you chose to back up, but you may be best off re-installing the OS from your OS DVDs and then "migrating" the material from the drive (see http://support.apple.com/kb/HT1553 and http://support.apple.com/kb/HT1427 for some general information and links to other relevant material).
If you simply backed up data by dragging it across to the other drive then you will need to re-install the OS and applications from the original discs, set up a user account and then drag things back to the appropriate locations.
In all cases you should make sure that the drive is partitioned with the GUID partition scheme, and formatted as HFS(extended) first, though.
Cheers
Rod

Restoring backup problems with new hard drive

Recently had to replace my hard drive (OS X Tiger 10.4.10). I had backed up iLife, iTunes and documents using the Backup utility (saving to external hard drive) and iDisk, so thought all would be well. My new hard drive has the updated OS (Leopard 10.5.5) and I cannot work out how to retrieve my stuff.
The Time Machine application obviously has no memory of my backup plans, and 'Backup' doesn't seem to exist, so I can't follow the restore instructions on that application. I can see that iLife and iTunes have been backed up on my external hard drive - I just can't see how to put the contents back. I have re-installed iLife and the iTunes application is ready and waiting.
My iDisk is completely empty - which means something is wrong or I completely misunderstood the point of it...
Any help gratefully received
Ross

Hi Lupe!
If you post the exact model number of the Seagate drive, I'll give the jumper setting a look to see it there is a limitation on setting to "slave." I wasn't aware anyone was doing that.
As near as I can tell, the basic problem is that the first-gen 733 QuickSilver does not have support for "large hard drives." That means that 128G is the maximum it can deal with. You can use the 160G drive, however, by using Disk Utility to create a partition of under 128G, say 125G, leaving the rest of the drive unformatted. Then it should work. Select the partition format as Mac Extended HFS+ Journaled.
Your G4 is older than the ones that this forum covers, thus the difference in hard drive capacities and also how hard drives are jumpered. You may want to make friends with folks in the forums for older G4s here:
http://discussions.apple.com/category.jspa?categoryID=113
Some of the same people haunt both forums so it's not a big deal if you decide to stay here. We're glad to have you either way!

Restore Old info on New Hard Drive

Similar Messages

Maybe you are looking for