Restore Password Manager .pwd File from Backup Image after HDD crash

Hi
After a HDD crash i try to recover my Password Manager pwd File from a Backup Image. In the Image the file is located in "C:\Dokumente und Einstellungen\XXX\Anwendungsdaten\Lenovo\Client Security Solution"
But if i try to import it the PW-Manager asks for a Password. But no PW works. Not the Windows PW (same as before) or not the Sec-Chip PW works. I tryed to copy the pwd File into the same folder but it´s not recordniced from the PW Manager.
Can somebody help me please to get my Passwords back?
thanks
Coolskin

Hi,
that saved passwords were stored also in TPM chip, so if Password maanger can not find them there , what is obvious, then I dont think, that this will work.
However it would be a test to install CSS withtou TPM recognision. Uninstall CSS and install CSS with EMULATIONMODE =1, this will install CSS in software emulation mode and do not need to contact with hardware TPM.
To be honest I never tried this scenario, but in if I would be in your situation, then I would test it just to see.
However I don't give it a big chance, that this will work.
Sorry for bad news
Rgrds

Similar Messages

Cannot restore files from backup

I'm attempting to restore some files from backups on one of my PC's.
If I attempt to access the "Restore files or folders for the computer" from the Essentials server I get the following:
If I launch the dashboard on the PC that I want to restore the files to, I also get an error message.
Not sure why I'm getting that message above when launching the Dashboard from the Launchpad. I can run the Dashboard from my *.remotewebaccess.com site with the same username/password.
How can I get access to the backups to restore the files?

The restore should indeed be done on the PC the files are from (Which i think is a bad implementation) anyway,
Please check the following registry key on the Server:
HLKM\Software\Microsoft\Windows NT\CurrentVersion\Terminal Server\TSAppAllowList
It should be set to a 1.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Restore Files from Backup on Vista Home Premium ; HP Pavilion m8120n

Hello,
I backed up files on HP personal media drive M:HP8120 and did a full System Recovery on my HP Pavilion m8120n. Now when I attempt to restore files from a backup made on this computer, the message says there are no backups available on this computer. I tried advanced restore/Restore files from backup made on another computer or restore files for all users on this computer. I can see the file in Select the Backup set to restore window. I select the file and in the next window, select the date to restore from, I get the message “Backup location is not available.” If I click next, in the select the files and folders to restore window, nothing is listed. However, I get the opportunity to restore everything in this backup -- add files, add folders, etc. If I click add folders, I don’t see drive M: but I see drive C: and D:.
At this point I am at a loss. Can anyone shed light on my situation?

Thanks for the info. It appears that your Time-Warner router is serving a public IP address.
My suggestion is to use the D-Link wireless-router for your local LAN (connect the Time-Warner to the WAN input of the D-Link). If you're concerned about speed issues, you can connect your laptop into the LAN bridge of the D-Link.
If you're worried about speed, you can do a simple before and after experiment to see if the D-link is degrading your I/O throughput. I've used sites speedtest.net with good success in troubleshooting bandwidth issues.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

How do I upgrade to snow leopard and then restore my files from my time machine HDD backup...without losing any data or reinstalling leopard (10.5)?

How do I upgrade to snow leopard (from leopard 10.5) and then restore my files from my time machine HDD backup...without losing any data or reinstalling leopard (10.5)?

Hello, it's great you have a backup, but 10.6 should just Install 10.6 system files over the top of 10.5 system files, & leave all your data intact on the drive.

How to restore files from Time Machine after Clean Install of Mavericks

How to restore files from Time Machine after Clean Install of Mavericks. I know the data is there but seems unaccessable because I may have changed the Computer or Owner name. Is there any way to fix that now?

Hi Linc,
my back-up data is managed by Time Machine; the actual data is on a second internal Hard Drive with a capacity of 1TB - not partitioned. I am using Time Machine and have access to all data backed up since Mavericks Clean Install but not the data prior to this date.
When I open the 1TB drive in Finder I can see a folder "Backups.backupdb/Sigi's Mac Pro/ followed by many folders of backup dates going back to 2010-09-20-103441 and up to 2014-02-07-142414 all followed with folder Macintosh HD. February 7th 2014 was the date of the clean install.
These Backups are followed by backup date folder 2014-02-08-075554 with a subfolder of MacPro-320GB (this is the name I assigned to my Boot Drive during formatting; I suspect I should have assigned the same name as before ie. Macintosh HD) and 2014-02-11 with a subfolder Macintosh HD, these are the ones I get access to by way of Time Machine > Restore.
Weird thing is on Febr 11 when I relised my possible mistake and renamed the Bootdrive back to what it was initially ie. Macintosh HD despite this I have access to all backup data since the Clean Install in both folders MacPro-320GB as well as Macintosh HD but not to any data prior to the Clean Install.
Is there something that Time Machine knows and prevents access or is it simply a matter of renaming the subfolder 2014-02-08-07554/MacPro-320GB to ........./Macintosh HD?
I like to restore selectively and not everything - It was hard work reinstalling apps that were supposed to be the troublemakers (ref my discussion on Maverick problems) but I now need to get onto data specific to some of these apps as well as other data I may have missed. Long story? Yes and sorry.
Sigi

I can't restore 'library' with support files from Time Machine

backup - I can't restore 'library' with support files from Time Machine - Ask Different
Due to an accident, my entire applications folder with all the support files, including plists and caches got deleted.
I tried restoring by files from the most recent Time Machine backups but I cannot retrieve my applications with the support files.
I even tried it with migration assistant on a new image.
Is this impossible?
Must I start from scratch?
Details of the ‘accident’
I was using this app called ‘AppCleaner’ that also automatically deletes related support files which are normally left behind if one simply trashes an Application.
In the search view, I typed the app name and I selected all the apps in the results using Command + A. Unfortunately, this selected every single Application in the Applications Folder in the background and I trashed and deleted all files.
Anyway.
I tried to restore the applications and library from my Time Machine Back-ups but failed to do so because I didn’t have enough space to restore. (I have a 11inch Macbook Air 2012 64GB SSD
When I tried to restart in recovery mode, I had the same problem, I was disallowed the option to restore using my time capsule backups because my SSD didn’t have enough space for the backup.
I then tried to restore it to a totally different but new image on a 64GB USB3.0 Sandisk USB Stick, but the process stopped after hours of being stuck around 30.4 percent and the computer was unable to boot, leaving me with a persistent verbose message suggesting it couldn’t identify the os, kernel or anything.
I finally tried restoring the state using migration assistant on the very same SSD that had my files missing. This happened successfully and I have all my applications in the applications folder.
But now I have 13GB free (I had 2GB before) and all my application support files, saved states, preferences, caches and customizations are gone.
Basically, it feels like I just got a new macbook with my documents and itunes folder loaded on to it.
How can I get my apps back to the pre-deletion state or is this impossible? Do I have to start from scratch? I thought my Time Machine Backups would restore it to exactly the same state, am I wrong?
Screenshots:
Message was edited by: Arsenenger

Can you simply navigate to your Time Machine backup with the Finder? Treat it like an external hardrive and just look for your old Applications folder. /Applications/
Also, quite a few apps put config and support files in ~/Library/Application\ Support/
So you may be able to get the files from there as well.

HT1382 how can I restore my back up files from my laptop? i want to see the dates and time that I backed up my files. is it posssible?

how can I restore my back up files from my laptop? i want to see the dates and time that I backed up my files. is it posssible?

What backed up files?
Available backups for an iOS device can be found in Edit > Preferences > Devices.

How to create a pdf file from multiple images ?

Dear All,
I want to create a SINGLE page pdf file from two or more page size images that are combined to make a single page pdf. Again, this question is on pdfs that are made out of several, atleast two color images and a black-and-white mask for one of them.
I have such pdf files from an unknown source (the producer is edited out) whereby there are three tiff images, obtained using the well known pdfimages extractor.
When I want to make a pdf out of tiff or png or other image formats, I right click and tell Adobe Acrobat to make a pdf.
However, I dont know how I can give a command to select say, three tif images and specify which is the mask for which and then join them in a way that I get the pdf from the composite of the two color images and a mask for one of them.
Please help me out.
I am a little familiar with the pdf structure skeleton and when necessary, fixed xref tables in one of my favorite editors. A few years ago, I also wrote a bunch of javascripts to make some annotations and needed some automation and used some itext type libraries. However, I need your help in this problem as I am now rusty and forgot some of what I studied to solve my earlier problems. This is a new problem for me. Gentle hints from you would be very nice to help me in this problem. Please specify if necessary what manual and pages to read. in the pdfspec.
Best Regards
Disabled Veteran [physically handicapped]

Hello Again.
On Fri, May 11, 2012 at 12:20 PM, lrosenth <[email protected]> wrote:
>
> Re: How to create a pdf file from multiple images ?
>
> created by lrosenth in PDF Language and Specifications - View the full
> discussion
> ________________________________
>
> No clue who Irving is…
>
I was hoping to have your first name so its easy for me to address you.
> I have no clue what OS platform, programming language, etc. you use so
> can’t really narrow things down.
I would gladly mention that I am working on windows platform, preferably XP.
I can also work on linux for free products that come with it.
> Also, as this is an Adobe forum, we only
> recommend Adobe products – so there may be other options that even my list
> wouldn’t include.
But adding other products, for the help of an adobe products user,
even if it outside adobe, shall add greater prestige to your company
and give impression of user-centeredness.
> If you read ISO 32000-1:2008 (aka the PDF standard), you will find the
> information about Images and Image Masks well described. I didn’t think I
> needed to repeat any of that information.
Well, just add the few pdf stanzas since you are proficient on it and
I am presently a little rusty as I mentioned. Just asking a little
extra yard, not even to go an extra mile.
> And, if you read that same document, you will see that there is NO SUCH
> THING as a “text only PDF”. All PDF documents are structured binary files.
Well, ascii format or uncompressed format that is human readable. I
know its a binary file, but human readable ascii version of it.
I hope you can give me some stanza and various other approaches
possible so I can select or combine things for myself. I see only a
miniscule number of posts claiming to have written masks in this forum
and then with no details.
Regards
Roger
Message was edited by: dying veteran
because the adobe posting system went crazy and truncated all except the first line ... dunno why

Just deleted an important file from backup. How do I retrieve it?

Just deleted an important file from 'Backup' in 'Finder'. How do I retrieve it?

Thank you for using the Apple Support Communities
From what I understand is that you deleted a backup file. Could you describe your problem with a little more detail please.
-Zeph

Why Bridge (CS5) does not make a PDF file from multiple images

Why Bridge (CS5) does not make a PDF file from multiple images? It used to work fine earlier, but now nothing happens when using OUTPUT for web or PDF.
I have uninstalled and installed my PS three times allready, so please not suggest that, it didn't help.
I have Creative Suite Premium, mac os x 10.6.8

Hi. You’ve posted your question in a forum that is for beginners trying to learn the basics of Photoshop. I'm moving your question to the Bridge forum for specialized attention to your situation.

How do I restore an only one event from backup

Ho do I restore one Event of many from Backup in Iphoto 9 (8.1.2)?

Take a look at this link, https://discussions.apple.com/message/15417614#15417614

Photomerge panorama produces an empty merge file from two images; how can I fix this? Thanks

Photomerge panorama produces an empty merge file from two images; how can I fix this? Thanks

If you did not create this swf yourself then you won't be able to do what I am suggesting. If you did, then open the fla in Flash and go into the Publish Settings and select the option to publish an html file as an output. That will create an html page that embeds the Flash file. Test that file in your browser and see if it plays properly. IF so, then copy that code in place of whatever Dreamweaver did to embed the Flash.
Dreamweaver is not a reliable tool for embedding Flash content... why it does not do it the same way Flash does it is anyone's guess.

Hi to all, I use Windows 7, 64Bit and Lightroom 5.7, Camera Raw 8.7, when I develop or export files (mostly Raw Fils from Nikon D810) after 10 to 20 pictures my computer shuts down or I get a bluescreen. Please tell me why.

Hi to all, I use Windows 7, 64Bit and Lightroom 5.7, Camera Raw 8.7, when I develop or export files (mostly Raw Fils from Nikon D810) after 10 to 20 pictures my computer shuts down or I get a bluescreen. Please tell me why.

Blue screen/Computer shuts down is almost always a hardware malfunction or a driver problem.
Make sure your video driver is up to date.
If it is, then the next suspect, in my mind, is overheating, make sure all of the fans in your CPU case are working properly.

How do I remove the license from a broken machine (HDD crashed) to use it on a new machine?

How do I remove the license for PSE from a broken machine (HDD crashed) to use it on a new machine?

You cannot remove the license from a broken machine.
Install and activate the software on new machine. Adobe provide the license to use the software on 2 computers, if you exceed then you are prompted with message wherein you can de-activate/remove the license from old machines.
- Manish

Restore files from Backup

Hi, I'm having problems restoring from the Backup I made in Tiger to Leopard.
I did a full backup onto an external drive of my iPhoto, iTunes, Mail, iCal and Address Book using Backup which is part of the .Mac bundle.
I have 70 gig of 'backup' files from Part 1 to Part 18 on my external hard drive.
I have installed Backup 3 onto my fresh copy of Leopard ..... but when I run a restore of the Backup files it only lets me select one "part" of the backup files not all 18 in one go and then it says:
"This backup does not contain a full restore catalog"
"If you choose to restore from this backup, you will only be able to restore files contained in this backup".
It then takes me through the process of "ticking" the boxes for the files i wish to restore and then scans all 70 gig but when it tries to copy it fails. ie: Failed Restore.
Any ideas how to get the 70 gig back onto my mac?
Cheers

Two things - Is the version of Backup the very latest from Apple?
I would suggest working backwards - I know it sounds like a lot of work.
Install Tiger on another computer, using the exact user/admin names/passwords
Install the original version of Backup you used on Tiger.
See what happens.
As an aside, and as you are finding out, Backup is not a very satisfactory way of backing up.
I use Superduper and CarbonCopy which make a bootable clone which you can test beforehand.
I believe that Backup encrypts the files - at least it does when you use iDisk, so you may not be able to easily get into the files, directly.
As I say, the easiest way to attempt a recovery is to go backwards, to Tiger.
I hope you will be able to recover the files.
Some other user here might have a better idea.
I am sure that there is a way to get them - it's a matter of finding it.

Restore Password Manager .pwd File from Backup Image after HDD crash

Similar Messages

Maybe you are looking for