Restore Points Deleted w/dual boot & Windows 7

Dual booting with two partitions
on another disk with Windows 7 / Windows 10
and when I returned to Windows 8.1 or
Windows 10 from Windows 7,
restore points are deleted and remain
in Windows 7?
Is there a solution?
Thanks
Hello

Thanks for the reply,
If it's the disks to hide concerned,
I have already done but to no avail ([HKEY_CURRENT_USER \ Software
\ Microsoft \ Windows \ CurrentVersion
\ Policies \ Explorer]).
I know that we could put offline the
affected partitions ([HKEY_LOCAL_MACHINE
\ SYSTEM \ MountedDevices \ Offline]), but
later by disk failure in the event log
... is that what you propose?
hello
Yes and No.
What do you mean by " but later by disk failure in the event log " ?
Have a look at this tutorial :
http://www.geekstogo.com/forum/topic/326541-windows-8-dual-boot-restore-points/
I am dual booting Win 7 and Win 10 TP Enterprise build 9879. That tutorial works for me.
P.S. ( Ignore the triple boot part.)

Similar Messages

Dual boot Windows from Toshiba Recovery CD

Is it possible to dual boot Windows from a Toshiba Recovery CD?
I have a Satellite A45-S120 with a Toshiba Windows XP Recovery CD.
I have XP installed on one partition. I partitioned the hard drive using GParted, and installed Linux on several partitions. I want to install XP on a 2nd partition, so I can dual boot 2 versions of Windows from the same hard drive.
When I go to install Windows, the Toshiba Recovery CD says the entire hard drive will be deleted. Is this the case, or will it only reformat a partition? I went into GParted and was able to change the first Windows XP ntfs partition to hidden, and now successfully can not boot Windows from the Grub Boot Manager. However, I worry that if GParted can see the partition, then the Toshiba Recovery CD might be able to. In addition, the Linux ext partitions could not be set to hidden. Will the Toshiba Recovery CD overwrite all the partitions, or can it maybe only install itself on the one ntfs partition available?
I read at http://www.vistax64.com/general-discussion/193560-install-xp-toshiba-recovery-disk-d.html that there may be a way possible, any advice?
Specs are:
1.26 Ghz Celeron
1.256 GB Ram
40 GB HD

Satellite A45-S120
I want to install XP on a 2nd partition,
So far as I know, that recovery disc will install nothing. It will restore the entire hard drive (master boot record and all) by writing all the bytes that were on the original drive (byte-by-byte).
-Jerry

Dual boot Windows 7 partition help

I want to dual boot Windows 7 & arch but I need help with figuring out what partitions to make and where to put them because it seems the automatic partition-er won't do the trick for me.
I have two drives that I want to completely format for a fresh, clean install: a 60GB SSD & a 750GB hard drive. I want the end result to be that the SSD only has Windows 7 Pro x64 SP1 installed to it and I will point the 'My Documents', 'My Pictures', etc. to a NTFS partition on the hard disk drive ( I know how to do this folder pointing ). I don't want arch to touch the SSD if possible so I can reformat the SSD separately if I ever just want to reformat Windows. I only want arch to be on the hard disk for that reason. I don't think I care which one handles the OS switching at boot ( should I favor Windows MBR or syslinux? Please give advice. ) And I would assume I make the NTFS partition on the hard disk a primary partition so how do I split up arch for the 3 other primary partitions left since the auto partition from the arch boot CD uses 4?

I'm no expert, but the way I would do it would be like this:
1. Create partitions on the HDD for /, /boot, /home and swap, along with one (or more) for your Windows personal files
2. Set the BIOS to boot from the SSD.
3. Install Windows on the SSD.
4. Right-click the "My Documents" folder, select "properties", then the "Location" tab and choose the new location for the folder.
5. Install Arch on the HDD partitions, and allow the boot manager to install itself in the MBR of the SSD.
Then the whole boot process will be on the SSD... If you ever need to get rid of the Linux bootloader, you can overwrite it with a "clean" Windows one using bootrec.exe (see here: http://support.microsoft.com/kb/927392).
Last edited by esuhl (2012-03-26 04:52:12)

[SOLVED] dual booting windows 7 with btrfs on grub-bios -- core.img

I am trying to install arch in a dual boot configuration with an existing windows 7 partition. I have everything from the beginner's guide done but the bootloader. When I run grub-install it tells me that core.img is too big.
Some googling tells me that this is relatively common with btrfs, and it seems the only work around is to switch to gpt mode and use a grub bios partition. But the info I've seen indicates that I need to use MBR mode to dual boot windows.
Is it safe to do this with windows? Is there another workaround? Or will I have to settle for ext4?
Last edited by jorenko (2013-06-09 03:53:24)

Well there's your problem, your first partition starts at sector 63. With recent versions of windows and fdisk (and every other partitioning tool I can think of off the top of my head) things now align themselves correctly. Also because there is now GPT, the first partition typically starts later as the GPT partition table will typically sit between the MBR and the first partition.
On a MBR partitioned system, grub2 will actually use the first 446 bytes like normal, but will then also use the space that is empty where GPT would sit. This is why when you have a GPT partitioned system, it will require you to create a 1-2MB grub boot partition, as it needs somewhere else to put its bloat. GPT actually still uses the MBR section, but simply creates one large partition covering the whole disk. This is so that tools that are not GPT aware will not think that they have a whole free disk to use as they please.
For comparison, here is whe I get from fdisk:
# fdisk -l /dev/sda
sudo fdisk -l /dev/sda
[sudo] password for curtisshima:
WARNING: fdisk GPT support is currently new, and therefore in an experimental phase. Use at your own discretion.
Disk /dev/sda: 250.1 GB, 250059350016 bytes, 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: gpt
# Start End Size Type Name
1 2048 2099199 1G EFI System EFI System
2 2099200 252166798 119.2G Linux filesyste arch-btrfs-1
3 252168192 488397134 112.7G Linux filesyste arch-btrfs-3
Note that I do use GPT. But that is not the point here. What I am trying to show is where my first partition starts. This is also where fdisk will start partitions these days. This is to ensure compatibility with 4k advanced format disks.
If you are not dead set on Grub2, you could try using syslinux. I really like it much better, though if you are booting more than one Linux, you need to either employ chainloading to various partition boot records, or have a shared /boot. Having a windows partition doens't really matter, as you are simply chainloading to that funky reserved partition anyway.
The other option is to use grub-legacy, which can still be found in the AUR. I actually liked the orginal Grub, as it provided a nice feature set, but was still configurable by hand and it actually fit into the MBR.

Dual Boot Windows Boot Error (Required Device Inaccessable)

I used to be dual booting Ubuntu & Windows 7. Have since replaced Ubuntu with Arch. Now I just installed GRUB2 and configured to to dual boot windows, but I found that Windows does not want to boot. I Googled and found http://www.petri.co.il/forums/showthread.php?t=42099, it looks like the same error codes and message. Problem is if I run Windows Startup Repair my GRUB will be gone and I need to restore it somehow? Is it possible to fix through Linux?
Last edited by jiewmeng (2012-05-09 04:01:04)

jiewmeng wrote:I used to be dual booting Ubuntu & Windows 7. Have since replaced Ubuntu with Arch. Now I just installed GRUB2 and configured to to dual boot windows, but I found that Windows does not want to boot. I Googled and found http://www.petri.co.il/forums/showthread.php?t=42099, it looks like the same error codes and message. Problem is if I run Windows Startup Repair my GRUB will be gone and I need to restore it somehow? Is it possible to fix through Linux?
https://bbs.archlinux.org/viewtopic.php?id=140730
https://wiki.archlinux.org/index.php/GR … mand_shell
http://axel668.blogspot.com/2011/03/how … grub2.html

Dual Boot, Windows doesn't boot.

Hi there,
Firstly, I'd like to apologize in advance if this has already been answered somewhere, but I couldn't seem to find it anywhere.
Yesterday, I tried to dual boot Windows 7 on my iMac with the latest version of Lion. I used Bootcamp and everything went according to plan untill I had to install Windows. My Mac restarted and began to install Windows, but after a while of installing, the disc stopped running and everytime I heard it trying to get back running, it was stopped by a weird noise, as if something was grinding onto it.
This kept going for a minute or two, when I decided to turn it off, since nothing was happening. After that, I started my Mac again and after a white screen, the only thing it shows is a black screen with a little type cursor in the upper left corner. I've tried to reboot it many times but I can't do anything, if I take the disc out, the only thing I get is a white screen, it doesn't go back to the normal Apple logo.
If anyone has some tips on where i should go with this, it'd be greatly appreciated!

You need to delete the boot camp partition and start over. Use Book Camp Utility or Disk Utility to remove the partition.
What happened is when you installed Windows and it did not finish installing the OS and will keep trying to boot to that partition and finish. Until the OS install is finished the Mac is flagged to boot automatically to that partition. This is why you are seeing the black screen.

Dual booting Windows 8 and Arch Linux with UEFI

Hi all!
I'm trying to install Arch Linux on my computer where I already have Windows 8, and I'm getting a little stuck when it comes to the partitioning.
Following the beginner's guide and the method here: https://wiki.archlinux.org/index.php/Un … n_in_Linux for setting up the partitions properly, regarding UEFI. My problem is that when using cgdisk to set up a new EFI system partition (ef00), I get an error message when trying to write the partition table (just saying that something went wrong). I figure the problem is that I already have a partition like this (correct me if I'm wrong), but it really looks like it succeded (see info below). So my question is: How do I preceed to keep my Windows 8 installation happy, but installing Arch? Do I remove the old EFI system partition and create a new one, or is there some method that allows me to edit the already existing one, to allow me to dual boot Windows 8 and Arch?
My partition table now looks like this:
Part. # Size Partition Type Partition Name
1007KB free space
1 500MB Windows RE Basic data partition
2 300MB EFI System EFI system partition (this one was already present on my system)
3 128MB Microsoft reserved Microsoft reserved partition
4 63.5GB Microsoft basic data Basic data partition
8 512MB EFI System EFI System partition (this is the one I tried to create when I got the error message)
5 29.5GB Linux filesystem Arch (this is where I was going to put my Arch installation)
6 22GB Windows RE Basic data partition
7 1024MB Windows RE Basic data partition
615KB free space
Just for the record; I only created partition #8 and #5.
Any help is appreciated! And sorry for beeing a total noob, but I really suck at this.

sudo make sandwich wrote:If it is possible to share ESP between OSes, how do I do this (would it be sufficent to follow this section: https://wiki.archlinux.org/index.php/Beginners'_Guide#For_UEFI_motherboards)?
There's really very little to do to share an ESP between OSes. Most OS installers will auto-detect the ESP and use it. Problem solved. For Arch it may be a bit more effort just because Arch uses a more hands-on installation process, but I've only done a couple of Arch installations, and the last one was several months ago, so I don't recall the details clearly enough to comment.
And how big will the partition need to be? The beginner's guide says 512MB or higher.
I don't know what was in the mind of the author, but my guess is that's because that's roughly the cutoff point where mkdosfs starts creating FAT32 by default rather than FAT16. The ESP is officially supposed to be FAT32, not FAT16, although FAT16 usually works OK. It's also possible to create FAT32 on smaller partitions by using an explicit option to mkdosfs ("-F 32").
The optimal size of the ESP depends on the files stored on it. If you don't store your Linux kernels, something as small as 100MiB is usually adequate; but a few Linux kernels and their initrd files can consume twice that amount. My own recommendation is for the ESP to be 200-500MiB.
The only error message I got from cgdisk is "Problem saving data! Your partition table may be damaged!", however booting Windows again works fine. Parted did not complain about antything.
Use the "verify" function in cgdisk. That will reveal any problems with the data structures. If a verify turns up OK, then that means that cgdisk ran into some sort of disk problem. Running gdisk rather than cgdisk and using the gdisk "w" option (without making any changes) may produce a more helpful error message.

Dual boot windows from USB via grub?

HI all:
I recently had a motherboard failure on an existing PC on which I dual-booted Windows XP and Gentoo. I replaced that box with a new HP PC preloaded with Vista. Wiped that immediately, and installed ARCH. But, I would like to also boot XP, and, since my old hard drive is still OK (I have it in an external USB adapter), I was thinking that I might configure grub to point at an external USB drive like this:
# Windows XP
title Windows XP
root (hd1,0)
makeactive
chainloader +1
where "hd1" (I hope) would point at my old drive, now connected via USB. In this way, I am really booting from my HDD (where grub lives), but "chain loading" from my USB external. Can this work??
-dvh

dvh wrote:
I configured as shown in the wiki, but when I try to boot XP, I get a message that says something to the effect of "missing or corrupted <windows root>\system32\ntoskrnl.exe". I checked the disk and it seems to be there and OK. I get the feeling that it is either NOT finding the hard disk (or partition) or it cannot interpret the NTFS file system (but grub was able to boot this before,...). So, two questions...
1) how do I know what the designator for the external USB hard disk will be? I have speculated that grub will find it at "hd1", but maybe not?
2) does the target disk NEED a windows boot loader? as I said earlier, I used to dual boot it, so there is a grub loader on that disk also.
...ok, three questions...
3) anything else that I should consider??
Thanks again for any help.
-dvh
1) i don'tknow a way to check this, but the
missing or corrupted <windows root>\system32\ntoskrnl.exe message comes from the windows boot process,
so it seems grub is configured correctly.
The main problem is that BOTH grub and windows boot need to have the correct settings.
Windows takes the settings for boot from the boot.ini file in the root of C:\ , and that probably needs to be changed.
You will need some way to get read/write access to the windows C-drive partition.
Install ntfs-3g in archlinux (see NTFS_Write_Support ) and post the contents of boot.ini .

Dual-booting Windows XP without Bootcamp

Is it possible to dual-boot Windows XP without Bootcamp, using another boot loader like LILO or Grub, or some other? Is it possible to do this assuming I do NOT want to install linux anywhere? Can anyone point me in the right direction with a HOWTO or something? Again, I do NOT want to install Linux, only OSX and Windows XP (no "triple boot"). Thanks.

Yes, just find a distro that supports macintel or intel mac. I think ubuntu has one, also keep in mind bootcamp has nothing to do with your macs firmware nore is it any type of bootloader. It partitions the HD, and allows you to create a CD with drivers on it. Might also consider parallels given the limited amount of space available on the macbooks. Having your linux install as a single document on the hd can be handy if you start to run out of room on the macbook.

Dual boot windows mac mini

I got a Mac mini and in general I'm happy with it but found out that there's some software I use regularly that is just much better on Windows. They barely support OS X although technically they do. So I would like to dual boot Windows as it seems like this is supported and not crazy.
I followed the bootcamp and some guides I found via Google. I have the mac mini 2014 with 8 gig ram and 1 terabyte of space. I have dual monitors setup and a logitech mouse and a logitech gaming keyboard G110 - both USB. (I also own a wireless apple keyboard which I occasionally use with my iPad). My first problem was a DOS screen telling me I can't boot up on the specified disk but I did get some help off Google telling me to hold down option while booting (this should be in the guides ;p) but it was easy to fix.. however I'm stumped on what's happening now.
When I click the Windows partition, it starts booting up Windows 7 Premium 64 bit setup and all looks good. Then a screen pops up asking me what language/region I am. The default is United states (perfect). On this screen my keyboard and mouse are useless. Or it's frozen. I think the former. I think the computer just can't recognize them. And I cannot figure out a way around this. If anyone can - please help I will be very thankful.
I've tried booting up using the Windows 7 DVD I own and an ISO installed on a USB flash drive per the Bootcamp installer. Results are the same.

Use Boot Camp!! Sounds like you have the install disc. Make sure you completely erase a USB 2.0 Thumb Drive format it as one MS DOS Master Boot Record partition. Download Drivers to it. I checked this box in boot camp only.
Having install disc and driver thumb drive ready. Insert Windows install disc and plug in Thumb drive.
Open Boot Camp uncheck first 2 boxes. Continue
Size the BOOTCAMP partion you want it to be by sliding the bar. Or split your HD is an option.
After that is complete. You will be asked where to install. Select BOOTCAMP partition
Click Drive Options (advanced). Click Format. Click OK. All goes well you click Next and it will format as NTFS
Follow instructions to to install, set up and configure Windows.
GO TO APPLE SUPPORT no where else. PRINT BOOT CAMP Installation & Setup Guide. It is in my binder with my Windows 7 Professional Disc. You'll need this, I'm afraid, to have on hand. When Windows is up and going, Antivirus 1st, Install Windows express updates only. Do not update Apple drivers for Windows. Running Windows 7 Pro on my Mac Mini since I bought it in August. Use it for those outdated programs I can't run on Mac or Windows 8. Love it.
GET THE MANUAL Please. Have fun with it.
Oh, try left clicking your USB Mouse to make it work. If not use keyboard strokes. i.e. I a ccept the license agreement (note that the a is underlined. hit "a" on the keyboard to check box.

T440P Dual Boot Windows 8 with Centos 7

So I have a T440p with Windows 8 installed. I have been trying to dual boot Centos 7 and also have attempted Centos 6.5. I have been using a bottable USB to perform the installation for both Centos 7 and 6.5.
When I try the Centos 7 install, I set the boot priority to USB first on startup, and it goes to a screen that lists options to install, verify Centos 7 or troubleshoot. Upon selecting any of these options, everytime I get the error message:
"alua: not attached"
When attempting the Centos 6.5 Live DVD install, I try to boot into the Live mode, but it freezes in the process each time.
I have heard about there being issues dual booting Windows 8 in UEFI mode with another Linux Distrobution.
Has anyone here sucessfully dual-booted Centos or any other Linux Distrobution on a T440P?
Any help/advice would be much appreciated.
Thanks

It's been many, many years since I don't do dual boot anymore. Don't find the reason to do it, either. Different kinds of virtualization should be enough. Anyway...
dfw1417 wrote:
It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
ENJOY! This is the BEST machine I ever had!
WHICH machine?
Cheers.
If I helped you, please give me some kudos! ^^

Dual boot Windows 8.1 with Yosemite

I'm attempting to dual boot Windows 8.1 on my parents iMac. I downloaded and successfully used Boot Camp 5 to partition the drive, giving the new section 50GB. I successfully installed Windows 8.1. Unfortunate now I cannot access the Yosemite partition. Boot Camp is not available in the Windows 8.1 I just installed, so the obvious option to use Boot Camp to reboot into OS X is not available. I tried downloading Boot Camp in Windows, but it won't install - error message indicates there is no location to install it to. I tried to restarting and holding the option key 12 separate times, it always boots into Windows without bringing up the any other option. I tried booting into safe mode and resting the PRAM several times, same outcome of booting into Windows; although Windows did not always boot it froze half the time. The idea was just be able to run some Windows games without purchasing another computer. Any ideas on what went wrong and how to fix it?

You do not need the Boot Camp drivers on Windows in order to start up in OS X. However, note that the option to start up with the Option (Alt) key is more tricky in those computers with a Bluetooth keyboard, such as the iMac.
In order to start up in OS X, you have to press the Option key since the startup sound has finished (if you do it before, your Mac will not recognize it) and hold it until you see all bootable partitions in the screen. Then, choose your OS X volume.
If you could not install the Boot Camp drivers in Windows, open Boot Camp Assistant after starting up in OS X and follow its steps (you will need a USB drive to save your drivers). Finally, start up in Windows, access to your USB drive through Windows Explorer and run the installer.

I want to dual boot Windows 8 on my 20-inch, Mid 2007 iMac, from an external USB drive.

I want to dual boot Windows 8 on my 20-inch, Mid 2007 iMac, from an external USB drive. The internal drive is completely dead, it doesn't even show up in Disk Utility. I'm running 10.8.2 from the external drive. When I start Boot Camp Assistant, at the Introduction page, when I press the continue button nothing happens. Do I have to have internal drive to run Boot Camp Assistant? Can anyone provide me with the steps to dual boot, with his setup? Thanks in advance!

Hi maczimillon,
Only follow these steps, it works for my:
Open "System Information" and note your "Boot ROM Version" (some like MBP51.007E.B06)
Navigate to "Utilities" in Finder and open the package contents of -BootCampAssistant.app- with right click. Duplicate the "Info.plist" file to the Desktop e.g. and open that with Text Editor.
You must locate the keys "DARequiredROMVersions"and "USBBootSupportedModels"
Add new strings with the information of your machine under booth keys (step 1), always respect the format, such as: <string>MBP51.007E.B06</string> for the frist key and <string>MBP51</string> for the second key.
Save changes and replace the original plist file (it may ask you to enter admin pass)
If you proceeded correctly you will see the checkbox "Create a Windows 7 USB install disk" enabled in Boot Camp Assistant.
Then you can follow the usual Boot Camp installation using your WIN8 DVD iso image . The assistant program will proceed resizing your disk partition and installing necessary drivers for your iMac.
I strongly recomends you to use thirld party's bootloaders like rEFInd (rEFIt) because of the Apple SMC versions of some old machines should not be able to boot properly from external devices like USB drives.

How to dual boot window 8.1 64 bit with xp sp1?

Hello Hp PC Experts,
Sir i was bought HP 15-r119TU two week ago. So i face problem of dual boot with this HP note book. I need dual boot window 8.1 64 bit with XP SP1. Kindly help me at the earliest possible.

@mp56
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Y500 dual boot windows 8 and fedora 19 problem

I bought a y500 two days ago and i wanted to dual boot windows 8 and fedora 19, so here's what i did
1. downloaded fedora 19 (x64) iso from the fedora website.
2.made a live USB using live usb creator.
4.opened disk management utility and shrunk the c drive (windows 8 was installed here) by 100 gb and kept the 100gb unallocated.
3. started the laptop with novo button, changed the bios config to boot from usb.
4.installed fedora from usb, selecting the 100gb unallocated memory for installation
5.restarted the laptop.
now the problem is fedora works perfectly but when i try to boot windows 8, the following error is shown.
windows failed to start
file:\BOOT\BCD
status: 0xc0000225
info:the boot configuration data for your PC is missing or contains errors.
i am guessing the fedora installation overwrote the boot files of windows and
i have not taken a backup. please help

hi,
I have a Y500 and I wanted to dualboot fedora 19 with windows 8, this proved to be unsuccessful. I had made a repair disk before the process (but not a set of recovery disks unfortunately >.< ). now I inserted the repair disk and selected the automatic repair option, it showed a message that auto recovery has failed. now when I pressed the NOVO button and selected the system recovery option, it does not go into the OKR menu but continues with the normal booting process. Can somebody guide me or give links where I can find step by step instructions to making OKR work and reset my laptop to factory settings? PLEASE help As Soon As Possible
NOTE: I did resize the windows 8 os partition but the recovery and the lenovo partition are still untouched

Restore Points Deleted w/dual boot & Windows 7

Similar Messages

Maybe you are looking for