Restore/Recover Error mit Netbackup PIPE

Hallo,
ich habe Probleme wenn ich eine Sicherung, die über 2 PIPES gesichert wurde, zurück spielen möchte.Beim recovern werde die 1sten beiden PIPES angelegt, in der definierten Größe auch gefüllt und dann anschließend bricht die Aktion mit der folgenden Meldung ab:
-24920 backup operation was unsuccessful (db_activate RECOVER "SAPBackupDBpar" DATA EBID "SID VXFxxxxxxx /sapdb/SID/sapbackup/SID1.1,SID VXFxxxxxxx /sapdb/SID/sapbackup/SID1.2") The backup tool failed with 2 as sum of exit codes database request was cancled and ended with error -917.
Wer kann mir da weiterhelfen??
Systemgröße 60 GB
PIPE Größe jeweils 5 GB
DB Version 7.7.07.32
Backup Software. Veritas Netbackup 7.01
Gruß
Matthias

Hello Matthias,
1. Database error:
-917: Save/restore write process crash - I/O error
Explanation
An I/O error occurred while attempting to write to a volume for a restore statement.
=> The restore statement was cancelled.
User Response
The error message contains an additional error description which must be interpreted according to the operating system being used.To find out and remove the error cause, consult the documentation on the operating system.
A. If you are SAP customer & could not solve the issue by yourself => create SAP message
B. Please post more information:
First post dbm.ebp file located in the database RUNDIRECTORY.
2. Please post your messages in English.
Regards, Natalia Khlopina

Similar Messages

HELP! How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?

Hi,
I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
So basically here are my 2 questions:
How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
Any solutions are very much apreciated!
Thanks!
I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)

WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

Restore / Recover / Overall nice treatment of UNDO

Hi,
I'm updating our 'Backup and Recovery Bible' which was written when UNDO was but a twinkle in the eye of Oracle Developers. I'm a bit unsure of how recovery should be done in the event that the UNDO tablespace or any of its datafiles dies.
I do know that I can create another UNDO tablespace if for example we lose one of the datafiles that isn't being used at the time of the failure. But could someone point me to a good link or comment on what should be done if we have a problem with UNDO in terms of restore / recover / RMAN usage etc.
We're using both 9i and 10g on Solaris. For the moment no interface to a media manager.
Cheers.

Confusion sets in.
I don't understand why (after renaming an undo datafile to OFF_undo) I'm not getting anything in the v$recover_file view.
undo datafile name changed
SQL> create table lambda (col1 varchar2(10)) tablespace users;
create table lambda (col1 varchar2(10)) tablespace users
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01116: error in opening database file 2
ORA-01110: data file 2: '/database/data01/z111ot11/undo_01.dbf'
ORA-27041: unable to open file
SVR4 Error: 2: No such file or directory
Additional information: 3
SQL> SELECT FILE#, ERROR, ONLINE_STATUS, CHANGE#, TIME
FROM V$RECOVER_FILE; 2
no rows selected
SQL> COL DF# FORMAT 999
SQL> COL DF_NAME FORMAT A35
SQL> COL TBSP_NAME FORMAT A7
SQL> COL STATUS FORMAT A7
SQL> COL ERROR FORMAT A10
SQL> COL CHANGE# FORMAT 99999999
SQL> SELECT r.FILE# AS df#, d.NAME AS df_name, t.NAME AS tbsp_name,
2 d.STATUS, r.ERROR, r.CHANGE#, r.TIME
3 FROM V$RECOVER_FILE r, V$DATAFILE d, V$TABLESPACE t
4 WHERE t.TS# = d.TS#
5 AND d.FILE# = r.FILE#
6 ;
no rows selected
Nothing in the alert.log either. If the UNDO is that important - why isn't the database screaming at me?

Backing up and Restoring/Recovering an Oracle 9i Database

I am fairly new at this and have been tasked with managing off site backups for customer data on a 9i database.
I am carrying out a user managed backup of the following data files to the offsite data centre.
User File
USERS01.DBF
Control File
CONTROL01.CTL
Redo Log Files
REDO01.LOG
REDO02.LOG
REDO03.LOG
Index File
INDX01.DBF
SPFile
SPFILEBCS.ORA
To test the success of the back up I have created a fresh install of 9i on a new machine with the file structure replicating that of the original.
My questions are;
1) Are these all the files required to be backed up in order to carry out a restore?
2) What are the steps that I need to carry out to restore/recover the database using the above files?
Any help or ‘user friendly’ resources for beginners would be greatly appreciated
Regards
Toby

1. If you are performing a cold backup you must backup all files listed by this query:
SELECT NAME FROM V$CONTROLFILE
UNION
SELECT NAME FROM V$DATAFILE
UNION
SELECT MEMBER FROM V$LOGFILE2. In order for you to restore, you perform a software-only install on the backup host.
3. Configure connectivity (listener.ora, sqlnet.ora, tnsnames.ora)
4. Create the service at the remote host using the oradim command.
5. Restore the above mentioned database file set to the same path they have in the source host.
6. Copy spfileINSTANCE_NAME.ora file to the backup host.
7. Start services
8. Start your database instance
9. Add temporary datafiles to your restored database:
ALTER TABLESPACE tempTS ADD TEMPFILE 'path/name';
10. Test it.

Ipad 2 ios 5.0.1 stuck at apple logo black screen, subsequently cannot restore, face error 16XX in itunes.

i have encountered this problem even after 10 hours of troubleshooting various methods, when i turned off my ipad and when turning it back on, it would just hang during the white apple logo on the black screen and remain there with no sign of activity till i hold the lock + home button till it shuts down.
after several attempts, i tried to put it into recovery and restore firmware, it would get stuck at stage "preparing ipad for restore" after i click on restore ipad.
i have attempted:
dfu and restore, 1600 error
recovery and restore, 21 error
my ipad 2 is wi-fi only model running ios 5.0.1.
i can't think of anything else other than sending it to applecare. my ipad 2 was recently purchased in jan this year. any input would be greatly welcomed!

Just follow these steps. I am sure it will solve your problem.
http://support.apple.com/kb/HT1808?locale=en_GB&login=email

Restore/recover from cold user-managed backup.

i shutdown db,(db is in no-archivelog mode), copy the dir having *.ctl, *.log & *.dbf files, what would be steps to recover in case,
my idea is restore all files in original dir and alter database open resetlogs should do the work,
if that did'n work then mount db and try
recover database using backup controlfile until cancel;
and give path one of online logfile and hit enter; & open db with resetlogs.make me right, if i am not......or any quick way to restore/recover tip?

DBA2008 wrote:
i shutdown db,(db is in no-archivelog mode), copy the dir having *.ctl, *.log & *.dbf files, what would be steps to recover in case,
my idea is restore all files in original dir and alter database open resetlogs should do the work,
if that did'n work then mount db and try
recover database using backup controlfile until cancel;
and give path one of online logfile and hit enter; & open db with resetlogs.make me right, if i am not......or any quick way to restore/recover tip?Why resetlogs ? All what you need is a pfile, if its not there already and start the db. That's all!
Aman....

I tried to charge my iPod Touch 5th generation but it died while charging and it was tuning and it said i had to connect to iTunes so i did and i had to restore it to use it and while restoring an error code (9) appered and i can't use it. Plz help

   So I was using my iPod Touch 5th generation and the charger wouldnt charge it and it died then while it was in the process of tuening back on the apple logo dissapeered and it kept on turning on and off so i put it into DFU mode and it said to plug it into itunes to i did and it said i had to restore it to use it but when i tried to restore it it brought up ," Couldnt restore ipod, error code (9) " ..... and i have tried 3 different USB cables and two different computers and USB ports and i have no clue what to do so i would like help from anyone please that would be awesome!!!!
                    Thank you,
                                       Zac

Zac henderson wrote:
...Couldnt restore ipod, error code (9) " ...
Try here > Configure security software

HP recovery could not restore computer error code 0xe0ef000e

I bought a nice Solid State drive. Unfortunately it is not possible to upgrade my system to new hard drive. It fails every time with HP recovery could not restore computer error code 0xe0ef000e. This is after removing everything... graphics card, ram, cd drive... nothing is plugged in except the keyboard, monitor and mouse.
Windows 8 strikes again. Does anyone have any suggestions about how to actually use the recovery disks to reinstall windows 8 onto a new solid state drive. I hate this computer and wish I would have never bought it actually. It's been nothing but crap from day one.

It's the HP 500-023w desktop. I ended up just buying a Winodws 8.1 OEM disk and installing that on the SSD. The recovery tool is a bit useless. Reading through various forum posts it seems I would have ended up spending hours trying to figure it out or else buying the recovery disks from HP. Just paying $89 for an OEM disk is a good deal by comparison since at the very least the computer has no bloatware on it now.
What a hugely unnecessary hassle really. Now if only I could get this heap of junk to boot with a PCI-e graphics card installed I might actually be able to use it with two monitors. Good grief.

Help, the iPhone cannot be restored,unknown error 1015

Im having this problem and I got paniced, tried to update the software on the iPhone( with the newest) & now I cant even restore it, always comes up with this Warning- the iPhone could not be restored, unknown error 1015. Please, advice what to do? Thanks in advance, any help would be appreciated

Type "1015" inot the search abr at the top of this page by "Support" and read the appropriate help articles.

TS1372 a message comes up when i plug in my iPod shuffle (version 1.0.2) and when i click to restore and update message comes up saying iPod could not be restored unknown error occurred (1430)

a message comes up when i plug in my iPod shuffle (version 1.0.2) and when i click to restore and update message comes up saying iPod could not be restored unknown error occurred (1430)

The linked article
http://support.apple.com/kb/TS1372
has some suggestions. Did you try doing those things?

HT4061 how to restore the iphone 4 when you get a restore message error (-1)?

how to restore the iphone 4 when you get a restore message error (-1)?

If the iPhone was jailbroken, you get this error due to baseband mismatch. No help for such iPhones here in this forum.
if not, Restore on another computer. If error persists it is hardware failure.

IPhone could not be restored. Error 2009

iPhone could not be restored. Error 2009. What does this error mean? I'm connecting my 4S to my computer with windows 7. What does it means and how can I resolve it?

Read here.
http://support.apple.com/kb/TS3694?viewlocale=en_US&locale=en_US#error2009

Apple Confirms BRICKED iPhone(s) [Restore Mode Error]

Well this is the end of the problem I had from yesterday if some of you were around yesterday you might have seen my posts about taking the 2.1 update causing a RESTORE MODE error on my phone.
APPLE employee 'COLIN' and his manager which WILL REMAIN nameless confirmed when i brought my phone in that yes this infact does happen to multiple people. infact it happened to the manager himself of this washington apple store.
In conclusion If you have an error that causes your phone to be in a restore state and black screens on bootup with a iTunes symbol and USB cable, making sure ALL iTunes software should be properly updated fully before trying to reset to factory settings.
This problem was resolved and was just letting everyone know if this error occurrs to you it's fixable by apple or yourself with iTunes. Thank you all for you help, and tips it made this proccess alot smoother.
-J.G.

This happens to me whenever I do an update or restore. I just move the USB cable to another port until I get one that works.

IPod classic won't restore,/recover etc.

The other day my iPod having tried to restart it after it froze reverted back to factory settings and wiped everything off it, it also seemed to lose its charge but I am not sure of that. I connected it to the net and tried to restore it. It didn't. I reconnected it and it told me to go into recovery, which I did and then I clicked on restore. Error 1430 came up and it wouldn't let me. It is now in disk mode but it doesn't seem to work, though it does appear to be accepting a charge.
I live in Colombia now and local service does not seem to be that good so I would prefer to try and solve this myself if I can.

First, try this article:
http://support.apple.com/kb/TS1372
I found it pretty useless, but what I did was uninstall and then reinstall my driver. Go to Control Panel > Administration Tools > Computer Management > Device Manager > Universal Serial Bus > iPod/Apple Mobile Device. Right click, Uninstall, then right click the Universal Serial Bus and click Scan for hardware changes. That worked for me.
Also, you can go to my Computer, right click the iPod and click Format. It takes a really long time but that should definitely work.

SQL Server Agent - [165] ODBC Error: 0, Named Pipes Provider: Could not open a connection to SQL Server [2]. [SQLSTATE 08001]

Hi,
I keep receiving the error below in the SQL Server Agent Error Log;
[165] ODBC Error: 0, Named Pipes Provider: Could not open a connection to SQL Server [2]. [SQLSTATE 08001]
It is occurring approximately 20 times an hour and i cannot link it to any job failures. All jobs on the same SQL instance are working.
The server is a clustered server and there are no errors occuring in the SQL Server error log at the same time. I have attempted to trace using profiler looking for errors and warnings but anything that does occur doesn't seem to correspond to the reported
times of the errors within the sql agent error log.
Please could someone point me where to look next?
Many thanks.

Please may I add that this is on a SQL Server 2008 R2 Enterprise edition patched to 10.50.1600.
Nah, that server is not patched at all, because 10.50.1600 is the RTM version. Find Service Pack 2 and install at the next maintenance window, after having performed tests according to your local policy.
It is not going to resolve your particular problem though.
It seems like you have a job that attempts to a connect to s server that is down or non-existing. The job may be configured to return success also on failures. I would check if there are jobs that target other servers.
Erland Sommarskog, SQL Server MVP, [email protected]

Restore/Recover Error mit Netbackup PIPE

Similar Messages

Maybe you are looking for