Restore/recovery mode
i updated my ipod touch last night,came back to it on my desk and now it's recovery/restore mode, what do i do?
Here's what error 1611 can be about:
Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Alsoattempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps.
Similar Messages
-
Okay, here it goes. About a week ago, I turned on my iPod mini, and it came up with a folder. The night before it was perfectly fine, but at this time I got the folder. I plugged it into the computer, and after it yelling at me that I didn't have enough space on the computer (even though I did, and it was insisting everything on the ipod was "other" and so was trying to send everything again). So, I went to restore the iPod, figuring formatting it would allow everything to be sent, and work perfectly fine. Well, from here, since that time, I have been stuck in a continous Restore-"in recovery mode. You must restore to use in iTunes" loop.
I have found MANY topics about this on the forums, all attributing it to many things (a lot of them to iTunes 7.02, which coincidently, I updated to only 2 days before this happened).
Here's what I've tried.
-changing drive letter
-restoring in disk mode
-drive diagnosis
-removing/reinstalling iTunes/iPod
-creating another user on my computer and trying to restore it that way
-formatting it manually, which doesn't work, being as the second I clicked restore, the iPod harddrive was formatted, and therefore, duh, there's nothing on it anymore to manually delete.
There was one suggestion on the forum to deleter the iPod drivers in the computer and try again, but I'm scared to do that in case I screw something up with the computer, and then I would be totally screwed.
Any more suggestions?I am afraid you have tried almost everything, the only suggestion is :-
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore” -
Lost songs, can't restore, recovery mode loop?
I plugged in my ipod nano for just a routine synch of some new songs. All appeared to synch as normal, but then I looked and it said "0 songs!!!" Next, an error message pops up and gives me no choice but to restore to factory settings, or cancel, so I chose to restore. Now, it says I am in "recovery mode," but nothing is happening. I seem to be caught in some loop that just keeps asking me to restore, whle ipod shows white screen with black "Do not Disconnect" flashing. But nothing appears to be happening. It has been this way for an hour.
Please help.....Don't know how things went so wrong just to synch a couple of new songs!!
Thanks,
SuzanneI am afraid you have tried almost everything, the only suggestion is :-
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore” -
I phone cant restore recovery mode, i phone cant restore recovery mode
I wanted to restore my iphone 3gs ios 4.1 but it says it cant restore than i eject it and conected in again and it said "iphone in recovery mode . restore it if you want to use it.' I tried to restore it but it says again that can't be rostore recovery mode again please HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
READ the article from which the question was posted and follow all the troubleshooting steps.
-
Ipod restore recovery mode issue
my ipod is in recovery mode, but when i try to restore it, it will say extracting software but halfway through, my ipod will turn off and the restore will stop. help?
Try deleting the update file and try again.. It is located here:
IPSW file location for Mac and Windows
Next try on another computer. -
Nano doesn't work and itunes in restore/recovery mode loop
My ipod nano 1st gen was fine (XP pro) - and then I plugged it in and it says "Itunes has detected an Ipod in rocover mode. You must restore this ipod before it can be used in windows."
I press restore and it seems to be restoring - and says its restore...but then it starts from square one and says it has to be restored again.
When I unplug the nano it says "do not disconnect"...but then it says "use itunes to restore".
I updated my itunes, restarted, etc. and still get the same.
Someone said something about changing the drive letter or drive mode...but i cant do that! please help.Have you tried?
http://docs.info.apple.com/article.html?artnum=93499#changedrive -
I have an iphone 4 nearly 2 yrs old. It has worked perfectly for that time. On Friday last (whilst away on holiday) I took the phone out of my pocket & it was lifeless. I tried switching it on, no joy, I tried the power/home button reset no joy. I plugged it into a mains charger & it came on but had a banner across the screen saying "verification required". I removed the charger & decided I would try again when I got home so I could connect to my PC & iTunes.
At home I went through the whole above process again but when I plugged it into the mains again it just had the Apple logo going on/off repeatedly. I plugged the phone into my PC & the apple logo appeared followed by the "connect to iTunes". In iTunes I get the banner "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes". So I click on "OK" the "Restore" then a banner asking if I'm sure I want to restopre the iPhone appears, press "Restore & Update". iTunes starts to remove the software, veryfies it with Apple & then another flag "The iPhone could not be restored. An unknown error occurred (21) which appears to be a security issue.
I thought the above problem was something to do with O2 because I picked up my new iPhone 4S last Tuesday but was unable to set it up until I got back from my holiday, O2 say it isn't anything they've done.
My question is has it happened to anyone & can anybody offer a solution, is it a hardware or software issue?Please see the two articles below:
http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125 -
today i tried downloading ios 5 for my iphone 4. i updated all the software on my macbook pro. then when i was downloading ios 5 for my phone. it completely shut off. at first it was just showing me the screen to plug it into itunes. when i did, it would tell me to restore it because it was in recovery mode. however, it could not get approved by apple. i understand they have been bombarded today. however, now it is just showing a black screen with the loading circle on it. it wont let me turn it back on. and when i plug it into my computer it isnt recognizing it. i dont know what to do. is my phone dead forever? its been 4 hours..
If you have no other choice then put it in DFU mode. https://discussions.apple.com/thread/3374810?
-
I did a backup on my iPod touch last night and it said it worked...I wanted to make sure my 1100 pictures and videos, mostly of my son, were safe since we rarely use the iPod touch anymore since we bought an iPad...I can't find them or I have no idea how to access them...I do not have a MAC...I have an HP computer with windows...
Now when I try to use my iTunes a message comes up that says my iPod is on recovery mode and has to do a restore to use my iTunes again...so when u click on that it states that pushing that button will restore my iPod touch to its factory settings...which means I will lose all my data...which I CANNOT do bc the videos of my son are some of his first words, first giggles, etc.
Now my iPod is stuck on a screen with a picture of a USB cord and an iTunes icon... and holding the power and push buttons down at the same time does nothing except bring up the apple icon for a moment and then it goes right back to the USB and iTunes icon
When I called Apple they said in order to talk to tech support I had to pay a fee of 19 dollars...which I think is kind of crap...I paid over 300 dollars for this and all I want is somebody to help me access my pics...I have done nothing wrong...this iPod was never dropped and never broke...I did the backup like I was supposed to and now I have an IPod touch that does nothing, and if my library of pics and videos are on my computer, I have no clue where or how to view them or back them up onto DVD....
I'm very upset and frustrated...please help!!!You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer. -
I forgot my password and am trying to reset my ipod, but it won't work.It says that my ipod is in recovery mode and that I must restore it. I click ok, and then click on restore and update. Then it says connecting ipod software update server and a screen pops up with ipod software update on the top and iOS 5.1. It lists a bunch of stuff this update contains and on the bottom it says next, which I click and nothing happens, it just goes back to the ipod restore page. Help, what am I doing wrong?
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw. -
I need help before I through my phone out the window. I tried updating my phone and have had nothing but problems. It is now in recovery mode and iTunes is telling me I need to restore it back to the factory setup. I do not want to restore my phone, I am going to loose all of my data if I do this. How can I get my phone out of recovery mode? I have already tried holding how the power and home buttons, letting one go at a time and contenting to hold them down for a number of seconds blah blah blah blah blah. It doesn't work, I don't know what to do.
If the phone is in recovery mode, the data is already gone. You'll need to restore your information from your most recent back up.
-
My iPhone went to Recovery mode, could not able to restore it back to working state
Iam iPhone4 user, Recently my iPhone shows only iTunes symbol. When I connect it to iTunes, it is saying "iPhone in Recovery mode".
When I Restore the iPhone, I could not be able to do it. When i check the update logs. Found the following error
[05:04:57.0680] CFError domain:AMRestoreErrorDomain code:-1 description:failed to update device firmware
[05:04:57.0682] CFError domain:AMRestoreErrorDomain code:-1 description:ramrod firmware update failed
[05:04:57.0684] CFError domain:RamrodErrorDomain code:1004 description:update_baseband: failed to perform next stage
[05:04:57.0685] CFError domain:BBUpdater code:2 description:(null)
[05:04:57.0686] Sending acknowledgement that final status was received
[05:04:57.0859] Restore completed, status:2
[05:04:57.0859] Failure Description:
[05:04:57.0859] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: -1
[05:04:57.0859] Depth:1 Error:The operation couldn’t be completed. (AMRestoreErrorDomain error -1 - Failed to handle message type StatusMsg)
[05:04:57.0859] Depth:2 Error:The operation couldn’t be completed. (AMRestoreErrorDomain error -1 - failed to update device firmware)
[05:04:57.0859] Depth:3 Error:The operation couldn’t be completed. (AMRestoreErrorDomain error -1 - ramrod firmware update failed)
[05:04:57.0859] Depth:4 Error:The operation couldn’t be completed. (RamrodErrorDomain error 1004 - update_baseband: failed to perform next stage)
[05:04:57.0859] Depth:5 Error:Exception at :0:
[05:04:57.0859] - kBBUReturnTimedOut(8)/2: Error reading EBL version (expected: 76 bytes - received: 0 bytes)
Please see below the complete Log
2013-09-22 10:25:14.540 [10556:2504]: restore library built Aug 8 2013 at 02:24:58
2013-09-22 10:25:14.541 [10556:2504]: iTunes: iTunes 11.1.0.126
2013-09-22 10:25:14.541 [10556:2504]: iTunes: Software payload version: 11A465 (option key)
2013-09-22 10:25:14.541 [10556:2504]: iTunes: Using MobileRestore state machine
[04:55:30.0696] Changing state from 'Idle' to 'Restoring'
[04:55:30.0697] requested restore behavior: Erase
[04:55:30.0698] requested variant: Erase
[04:55:30.0700] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[04:55:31.0195] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
[04:55:31.0196] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 0705E610 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0197] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 0705E4F0 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0197] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0705E6A0 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0198] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0705E658 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0199] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0705E5C8 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0200] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0705E580 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0200] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0F659E20 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0201] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 0F659E68 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0202] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 0F659EB0 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0203] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0F659EF8 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0203] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 0F659F40 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0204] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 0F659F88 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0205] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 0F69C428 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0206] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 0F69C470 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0206] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 0F69C4B8 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0207] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 0F69C500 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0208] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 0F69C548 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0208] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 0F69C590 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[04:55:31.0209] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 0F5CC390 [71A38078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[04:55:31.0210] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
[04:55:31.0210] amai: AMAuthInstallDebugWriteObject: debug object written: C:\Users\CIPHER~1\AppData\Local\Temp\PerA2C8.tmp\amai\debug\tss-request.plist
[04:55:31.0968] amai: tss_submit_job: HttpQueryInfo returned 200
[04:55:32.0478] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
[04:55:32.0480] amai: AMAuthInstallDebugWriteObject: debug object written: C:\Users\CIPHER~1\AppData\Local\Temp\PerA2C8.tmp\amai\debug\tss-response.plist
[04:55:32.0499] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
[04:55:32.0508] iBoot build-version = iBoot-1940.1.75
[04:55:32.0509] iBoot build-style = RELEASE
[04:55:32.0509] requested restore behavior: Erase
[04:55:32.0512] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[04:55:32.0513] requested restore behavior: Erase
[04:55:32.0516] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[04:55:32.0517] unable to open device_map.txt: No such file or directory
[04:55:32.0518] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
[04:55:32.0519] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[04:55:32.0520] radio-error = 256
[04:55:32.0520] radio-error-string = 'Corrupted stack'
[04:55:32.0521] unable to open device_map.txt: No such file or directory
[04:55:32.0522] <Recovery Mode Device 0274EC88>: production fused device
[04:55:32.0523] requested restore behavior: Erase
[04:55:32.0524] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[04:55:32.0525] requested restore behavior: Erase
[04:55:32.0525] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[04:55:32.0526] interface has 1 endpoints, file pipe = 1
[04:55:32.0526]
[04:55:32.0527] <Recovery Mode Device 0274EC88>: operation 4 progress -1
[04:55:32.0579] bootstrapping restore with iBEC
[04:55:32.0580] requested restore behavior: Erase
[04:55:32.0592] <Recovery Mode Device 0274EC88>: operation 31 progress -1
[04:55:33.0592] <Recovery Mode Device 0274EC88>: Recovery mode succeeded
[04:55:33.0593] Finished Recovery Restore Phase: Successful
[04:55:33.0998] Recovery mode device disconnected
[04:55:33.0998] Device removed when in state Restoring, moving device to transition state
[04:55:33.0999] Changing state from 'Restoring' to 'Transitioning'
[04:55:34.0000] Creating timer to monitor transition
[04:56:14.0786] Recovery mode device connected
[04:56:14.0786] Transitioning device returned, continuing restore.
[04:56:14.0787] Canceling timer
[04:56:14.0787] Changing state from 'Transitioning' to 'Restoring'
[04:56:14.0788] requested restore behavior: Erase
[04:56:14.0788] requested variant: Erase
[04:56:14.0789] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[04:56:15.0282] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[04:56:15.0283] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[04:56:15.0283] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[04:56:15.0284] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[04:56:15.0285] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[04:56:15.0285] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
[04:56:15.0286] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[04:56:15.0287] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[04:56:15.0287] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[04:56:15.0288] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[04:56:15.0289] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[04:56:15.0290] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[04:56:15.0290] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[04:56:15.0291] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[04:56:15.0292] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[04:56:15.0293] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[04:56:15.0293] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[04:56:15.0294] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[04:56:15.0295] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[04:56:15.0295] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[04:56:15.0296] iBoot build-version = iBoot-1940.1.75
[04:56:15.0297] iBoot build-style = RELEASE
[04:56:15.0297] requested restore behavior: Erase
[04:56:15.0297] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[04:56:15.0298] requested restore behavior: Erase
[04:56:15.0299] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[04:56:15.0299] unable to open device_map.txt: No such file or directory
[04:56:15.0300] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
[04:56:15.0301] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[04:56:15.0301] radio-error = 256
[04:56:15.0302] radio-error-string = 'Corrupted stack'
[04:56:15.0302] unable to open device_map.txt: No such file or directory
[04:56:15.0303] <Recovery Mode Device 0274FD00>: production fused device
[04:56:15.0304] requested restore behavior: Erase
[04:56:15.0304] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[04:56:15.0305] requested restore behavior: Erase
[04:56:15.0305] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[04:56:15.0306] interface has 1 endpoints, file pipe = 1
[04:56:15.0306]
[04:56:15.0307] <Recovery Mode Device 0274FD00>: operation 4 progress -1
[04:56:15.0348] unable to open device_map.txt: No such file or directory
[04:56:15.0350] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
[04:56:15.0352] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[04:56:15.0353] requested restore behavior: Erase
[04:56:15.0354] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[04:56:15.0356] requested restore behavior: Erase
[04:56:15.0360] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[04:56:15.0362] <Recovery Mode Device 0274FD00>: operation 42 progress -1
[04:56:15.0363] requested restore behavior: Erase
[04:56:15.0366] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[04:56:16.0407] <Recovery Mode Device 0274FD00>: operation 5 progress -1
[04:56:16.0813] unable to open device_map.txt: No such file or directory
[04:56:16.0813] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
[04:56:16.0814] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[04:56:16.0815] AMDeviceIoControl: GetOverlappedResult failed
[04:56:16.0815] AMDeviceIoControl: pipe stall
[04:56:16.0816] USBControlTransfer: error 31, usbd status c0000004
[04:56:16.0816] command device request for 'getenv ramdisk-delay' failed: 2008
[04:56:18.0810] <Recovery Mode Device 0274FD00>: operation 6 progress -1
[04:56:19.0822] <Recovery Mode Device 0274FD00>: operation 7 progress -1
[04:56:20.0167] <Recovery Mode Device 0274FD00>: operation 8 progress -1
[04:56:20.0168] unable to open device_map.txt: No such file or directory
[04:56:20.0168] found device map entry for 0x00008930 0x00000000. boardConfig=n90ap platform=s5l8930x
[04:56:20.0169] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
[04:56:20.0170] <Recovery Mode Device 0274FD00>: operation 9 progress -1
[04:56:20.0170] <Recovery Mode Device 0274FD00>: Recovery mode succeeded
[04:56:20.0171] Finished Recovery Restore Phase: Successful
[04:56:21.0878] Recovery mode device disconnected
[04:56:21.0879] Device removed when in state Restoring, moving device to transition state
[04:56:21.0880] Changing state from 'Restoring' to 'Transitioning'
[04:56:21.0880] Creating timer to monitor transition
[04:56:25.0550] RestoreOS mode device connected
[04:56:25.0551] Transitioning device returned, continuing restore.
[04:56:25.0552] Canceling timer
[04:56:25.0552] Changing state from 'Transitioning' to 'Restoring'
[04:56:25.0556] <Restore Device 06C88B38>: operation 44 progress -1
[04:56:25.0557] requested restore behavior: Erase
[04:56:25.0558] requested variant: Erase
[04:56:25.0559] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[04:56:26.0055] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
[04:56:26.0056] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
[04:56:26.0056] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
[04:56:26.0057] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
[04:56:26.0058] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
[04:56:26.0059] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBEC" has been previously personalized; skipping it
[04:56:26.0059] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
[04:56:26.0060] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
[04:56:26.0061] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
[04:56:26.0062] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
[04:56:26.0063] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
[04:56:26.0063] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
[04:56:26.0064] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
[04:56:26.0064] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
[04:56:26.0065] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
[04:56:26.0066] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
[04:56:26.0066] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
[04:56:26.0067] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
[04:56:26.0068] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
[04:56:26.0069] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
[04:56:26.0070] requested restore behavior: Erase
[04:56:26.0070] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[04:56:26.0071] fixed TcpWindowSize (129940) can cause restore failure if too large
[04:56:26.0072] device did not return saved USB log
[04:56:26.0072] device did not return saved panic log
[04:56:26.0073] previous restore failed with exit status 0x100
[04:56:26.0073] connected to service com.apple.mobile.restored
[04:56:26.0074] using protocol version 13
[04:56:26.0074] unable to open device_map.txt: No such file or directory
[04:56:26.0075] board config = n90ap
[04:56:26.0079] no value returned for BootArgs
[04:56:26.0079] _copyDeviceProperty() failed for restore bootargs
[04:56:26.0083] no value returned for MarketingPartNumber
[04:56:26.0084] _copyDeviceProperty() failed for mpn
[04:56:26.0084] requested restore behavior: Erase
[04:56:26.0085] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
[04:56:26.0090] value query for 'HardwareModel' returned 'N90AP'
[04:56:26.0104] <Restore Device 06C88B38>: operation 28 progress -1
[04:56:53.0845] previous restore failed: true,FULL_CLOCK_INDEX) = 0x0
[04:56:53.0845] Scaler 0 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
[04:56:53.0845] Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
[04:56:53.0845] void AppleRGBOUT::verify_swap_gated(IOMFBSwapIORequest *, bool *) failed fIsDPOut: 0 fDPDriver: 0 fTVOUTDelegate: 0
[04:56:53.0845] AppleRGBOUT verify_swap failed
[04:56:53.0845] void AppleRGBOUT::verify_swap_gated(IOMFBSwapIORequest *, bool *) failed fIsDPOut: 0 fDPDriver: 0 fTVOUTDelegate: 0
[04:56:53.0845] AppleRGBOUT verify_swap failed
[04:56:53.0845] AppleS5L8920XBasebandSPIController::loadConfiguration: NCLK Frequency 48857142, Prescaler 3
[04:56:53.0845] BasebandSPIDevice::exitLowPower: Invalid state inactive
[04:56:53.0845] AppleSerialMultiplexer: adap::start: Frame size is 2048, Rx Buffer count is 16
[04:56:53.0845] AppleSerialMultiplexer: mux::start: created new mux (17) for spi-baseband with adapter BasebandSPIDevice
[04:56:53.0845] AppleSerialMultiplexer: debugparams::init: Parsed flags "" ( 0 )
[04:56:53.0845] AppleSerialMultiplexer: !! mux::setPowerStateGated: Skipping power state change
[04:56:53.0845] AppleSamsungSerial: Identified Serial Port on ARM Device=uart1 at 0x82600000(0x85246000)
[04:56:53.0845] AppleSamsungSerial: Identified Serial Port on ARM Device=uart2 at 0x82700000(0x85248000)
[04:56:53.0845] AppleSamsungSerial: Identified Serial Port on ARM Device=uart3 at 0x82800000(0x8524b000)
[04:56:53.0845] AppleSamsungSerial: Identified Serial Port on ARM Device=uart6 at 0x82b00000(0x8524d000)
[04:56:53.0845] [HPark] AUD10::start: 0xc807e000, highland-park mIISNub: 0x875d9b80, sampleRate = 44100, ol=10, oi=12
[04:56:53.0845] AppleCS42L61Audio: could not allocate control 395
[04:56:53.0845] AppleARMBacklight::start: _minDACLevel=456 _maxDACLevel=1971
[04:56:53.0845] AppleMultitouchN1SPI: successfully started
[04:56:53.0845] AppleRGBOUT: TVOUT device is detected
[04:56:53.0845] ApplePinotLCD: _lcdPanelID: 0xb2d105c8 _lcdPanelClass: 2
[04:56:53.0845] IOReturn AppleMobileCLCD::set_ditherTable_state(bool), mIsCLCDDitherFor8Bits is true, no dynamic dither table.
[04:56:53.0845] [HPark] AUD10::start: 0xc807e000, highland-park mIICNub: 0x87d874d0, mIISNub: 0x875d9b80, mSerialNub: 0x8993c000, sampleRate = 44100, ol=10, oi=12
[04:56:53.0845] [HPark] AUD10 ATSc values: [ mic1: 0x0000000e, mic2: 0x00000000, mic3: 0x00000000, recv: 0x000000fb, spk: 0x00000000 ]
[04:56:53.0845] [HPark] AUD10::setPowerState() function called whereas Start() is not finished
[04:56:53.0845] AppleMultitouchN1SPI: detected HBPP. driver will be kept alive
[04:56:53.0845] AppleD1815PMUPowerSource: AppleUSBCableDetect 1
[04:56:53.0845] AppleD1815PMUPowerSource: AppleUSBCableType USBHost
[04:56:53.0845] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[04:56:53.0845] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
[04:56:53.0845] IOSDIOController::enumerateSlot(): Searching for SDIO device in slot: 0
[04:56:53.0845] IOSDIOController::enumerateSlot(): Found SDIO I/O device. Function count(1), memory(0)
[04:56:53.0845] IOSDIOIoCardDevice::parseFn0CISTuple(): Device manufacturer ID 0x2d0, Product ID 0x4329
[04:56:53.0845] IOSDIOIoCardDevice::parseFn0CISTuple(): Manufacturer: ""
[04:56:53.0845] IOSDIOIoCardDevice::parseFn0CISTuple(): Product: ""
[04:56:53.0845] IOSDIOIoCardDevice::parseFn0CISTuple(): ProductInfo0: "s=B1"
[04:56:53.0845] IOSDIOIoCardDevice::parseFn0CISTuple(): ProductInfo1: "P=N90 m=3.1 V=u"
[04:56:53.0845] AppleBCMWLANBusInterfaceSdio::start(): Started by: IOSDIOIoCardDevice, AppleBCMWLANV2-241 Aug 13 2013 22:03:24
[04:56:53.0845] AppleBCMWLANCore::init(): IO80211-39 Aug 13 2013 21:28:24
[04:56:53.0845] AppleBCMWLANCore::init(): AppleBCMWLANV2-241 Aug 13 2013 22:03:28
[04:56:53.0845] 000126.418933 wlan.A[0] AppleBCMWLANProvisioningManager::gatherDeviceTreeData(): WiFi 'local-mac-address' is invalid!
[04:56:53.0845] 000126.419010 wlan.A[1] AppleBCMWLANProvisioningManager::gatherDeviceTreeData(): Invalid 2.4GHz calibration data in device tree.
[04:56:53.0845] 000126.419561 wlan.A[2] AppleBCMWLANProvisioningManager::validateData(): Error, unable to obtain MAC address, can't proceed any further
[04:56:53.0845] 000126.419605 wlan.C[3] AppleBCMWLANProvisioningManager::processProvisionedData(): Invalid provisioning data, general error
[04:56:53.0845] 000126.419642 wlan.A[4] AppleBCMWLANCore::start(): Failed to process provisioning data
[04:56:53.0845] read new style signature 0x43313132 (line:389)
[04:56:53.0845] [FTL:MSG] VSVFL Register [OK]
[04:56:53.0845] [WMR:MSG] Metadata whitening is set in NAND signature
[04:56:53.0845] [FTL:MSG] VFL Init [OK]
[04:56:53.0845] display-scale = 2
[04:56:53.0845] display-rotation = 0
[04:56:53.0845] found applelogo at /usr/share/progressui/[email protected]
[04:56:53.0845] found display: primary
[04:56:53.0845] display: 640 x 960
[04:56:53.0845] [FTL:MSG] VFL_Open [OK]
[04:56:53.0845] [FTL:MSG] YAFTL Register [OK]
[04:56:53.0845] found PTP interface
[04:56:53.0845] AppleSynopsysOTGDevice - Configuration: PTP
[04:56:53.0845] AppleSynopsysOTGDevice Interface: PTP
[04:56:53.0845] AppleSynopsysOTGDevice - Configuration: iPod USB Interface
[04:56:53.0845] AppleSynopsysOTGDevice Interface: USBAudioControl
[04:56:53.0845] AppleSynopsysOTGDevice Interface: USBAudioStreaming
[04:56:53.0845] AppleSynopsysOTGDevice Interface: IapOverUsbHid
[04:56:53.0845] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
[04:56:53.0845] AppleSynopsysOTGDevice Interface: PTP
[04:56:53.0845] AppleSynopsysOTGDevice Interface: AppleUSBMux
[04:56:53.0845] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
[04:56:53.0845] AppleSynopsysOTGDevice Interface: PTP
[04:56:53.0845] AppleSynopsysOTGDevice Interface: AppleUSBMux
[04:56:53.0845] AppleSynopsysOTGDevice Interface: AppleUSBEthernet
[04:56:53.0845] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
[04:56:53.0845] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
[04:56:53.0845] IOAccessoryPortUSB::start
[04:56:53.0845] AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
[04:56:53.0845] virtual bool AppleUSBDeviceMux::start(IOService *) build: Aug 13 2013 22:01:43
[04:56:53.0845] init_waste
[04:56:53.0845] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
[04:56:53.0845] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
[04:56:53.0845] AppleUSBEthernetDevice::start: device-mac-address not found for device in the device-tree, generating a fake one
[04:56:53.0845] AppleUSBEthernetDevice::start: host-mac-address not found for host in the device-tree, generating a fake one
[04:56:53.0845] AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
[04:56:53.0845] AppleSynopsysOTGDevice::startUSBStack Starting usb stack
[04:56:53.0845] IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
[04:56:53.0845] [FTL:MSG] FTL_Open [OK]
[04:56:53.0845] [NAND] _publishServices:642 FTL capabilities: 0x00000000
[04:56:53.0845] [nand_part_core:INF@ 157] published partition 0
[04:56:53.0845] [nand_part_core:INF@ 157] published partition 1
[04:56:53.0845] [nand_part_core:INF@ 157] published partition 2
[04:56:53.0845] [nand_part_core:INF@ 157] published partition 3
[04:56:53.0845] [nand_part_core:INF@ 157] published partition 5
[04:56:53.0845] [nand_part_core:INF@ 157] published partition 6
[04:56:53.0845] [effaceable:INIT] found current generation, 212, in group 3
[04:56:53.0845] [effaceable:INIT] started
[04:56:53.0845] [effaceable:INIT] started
[04:56:53.0845] AppleUSBDeviceMux::handleConnectResult new session 0x8b46fd68 established 62078<-lo0->49152 62078<-usb->9216
[04:56:53.0845] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x8b46fd68
[04:56:53.0845] AppleUSBDeviceMux::handleConnectResult new session 0x8b46fd68 established 62078<-lo0->49153 62078<-usb->9472
[04:56:53.0845] AppleUSBDeviceMux::handleConnectResult new session 0x8b46fcb8 established 62078<-lo0->49154 62078<-usb->9728
[04:56:53.0845] AppleUSBDeviceMux::handleConnectResult new session 0x8b46fc60 established 62078<-lo0->49155 62078<-usb->9984
[04:56:53.0845] recv(7, 4) failed: connection closed
[04:56:53.0845] unable to read message size: -1
[04:56:53.0845] could not receive message
[04:56:53.0845] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x8b46fd68
[04:56:53.0845] AppleUSBDeviceMux::handleConnectResult new session 0x8b46fd68 established 62078<-lo0->49156 62078<-usb->10240
[04:56:53.0845] recv(7, 4) failed: connection closed
[04:56:53.0845] unable to read message size: -1
[04:56:53.0845] could not receive message
[04:56:53.0845] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x8b46fcb8
[04:56:53.0845] recv(13, 4) failed: connection closed
[04:56:53.0845] unable to read message size: -1
[04:56:53.0845] could not receive message
[04:56:53.0845] AppleUSBDeviceMux::handleConnectResult new session 0x8b46fcb8 established 62078<-lo0->49157 62078<-usb->10496
[04:56:53.0845] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x8b46fd68
[04:56:53.0845] recv(7, 4) failed: connection closed
[04:56:53.0845] unable to read message size: -1
[04:56:53.0845] could not receive message
[04:56:53.0845] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x8b46fcb8
[04:56:53.0845] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x8b46fc60
[04:56:53.0845] AppleUSBDeviceMux::handleConnectResult new session 0x8b46fc60 established 62078<-lo0->49158 62078<-usb->10752
[04:56:53.0845] recv(13, 4) failed: connection closed
[04:56:53.0845] unable to read message size: -1
[04:56:53.0845] could not receive message
[04:56:53.0845] recv(14, 4) failed: connection closed
[04:56:53.0845] unable to read message size: -1
[04:56:53.0845] could not receive message
[04:56:53.0845] AppleUSBDeviceMux::handleConnectResult new session 0x8b46fcb8 established 62078<-lo0->49159 62078<-usb->11008
[04:56:53.0845] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x8b46fcb8
[04:56:53.0845] AppleUSBDeviceMux::handleConnectResult new session 0x8b46fcb8 established 62078<-lo0->49160 62078<-usb->11264
[04:56:53.0845] recv(13, 4) failed: connection closed
[04:56:53.0845] unable to read message size: -1
[04:56:53.0845] could not receive message
[04:56:53.0845] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x8b46fcb8
[04:56:53.0845] recv(13, 4) failed: connection closed
[04:56:53.0845] unable to read message size: -1
[04:56:53.0845] could not receive message
[04:56:53.0845] AppleUSBDeviceMux::handleConnectResult new session 0x8b46fcb8 established 62078<-lo0->49161 62078<-usb->11520
[04:56:53.0845] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x8b46fcb8
[04:56:53.0845] recv(13, 4) failed: connection closed
[04:56:53.0845] unable to read message size: -1
[04:56:53.0845] could not receive message
[04:56:53.0845] AppleUSBDeviceMux::handleConnectResult new session 0x8b46fcb8 established 62078<-lo0->49162 62078<-usb->11776
[04:56:53.0845] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x8b46fcb8
[04:56:53.0845] AppleUSBDeviceMux::handleConnectResult new session 0x8b46fcb8 established 62078<-lo0->49163 62078<-usb->12032
[04:56:53.0845] recv(13, 4) failed: connection closed
[04:56:53.0845] unable to read message size: -1
[04:56:53.0845] could not receive message
[04:56:53.0845] unrecognized key 'BootArgs' in value query
[04:56:53.0845] failed to handle value query for key 'BootArgs', sending back empty response
[04:56:53.0845] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x8b46fcb8
[04:56:53.0845] AppleUSBDeviceMux::handleConnectResult new session 0x8b46fcb8 established 62078<-lo0->49164 62078<-usb->12288
[04:56:53.0845] recv(13, 4) failed: connection closed
[04:56:53.0845] unable to read message size: -1
[04:56:53.0845] could not receive message
[04:56:53.0845] unrecognized key 'MarketingPartNumber' in value query
[04:56:53.0845] failed to handle value query for key 'MarketingPartNumber', sending back empty response
[04:56:53.0845] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x8b46fcb8
[04:56:53.0845] recv(13, 4) failed: connection closed
[04:56:53.0845] unable to read message size: -1
[04:56:53.0845] could not receive message
[04:56:53.0845] AppleUSBDeviceMux::handleConnectResult new session 0x8b46fcb8 established 62078<-lo0->49165 62078<-usb->12544
[04:56:53.0845] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x8b46fcb8
[04:56:53.0845] recv(13, 4) failed: connection closed
[04:56:53.0845] unable to read message size: -1
[04:56:53.0845] could not receive message
[04:56:53.0845] client protocol version 13
[04:56:53.0845] *** UUID 6780545E-FB6A-4849-9034-2103773327AE ***
[04:56:53.0845] Restore options:
[04:56:53.0845] UUID => <CFString 0x15d2aac0 [0x3c0ae0]>{contents = "6780545E-FB6A-4849-9034-2103773327AE"}
[04:56:53.0845] MinimumSystemPartition => <CFNumber 0x15d2aa10 [0x3c0ae0]>{value = +1512, type = kCFNumberSInt64Type}
[04:56:53.0845] SystemPartitionSize => <CFNumber 0x15d2a4a0 [0x3c0ae0]>{value = +1512, type = kCFNumberSInt64Type}
[04:56:53.0845] SystemPartitionPadding => <CFBasicHash 0x15d2ad20 [0x3c0ae0]>{type = mutable dict, count = 5,
[04:56:53.0845] entries =>
[04:56:53.0845] 2 : <CFString 0x15d2aa40 [0x3c0ae0]>{contents = "128"} = <CFNumber 0x15d2aa70 [0x3c0ae0]>{value = +1280, type = kCFNumberSInt64Type}
[04:56:53.0845] 3 : <CFString 0x15d29a50 [0x3c0ae0]>{contents = "16"} = <CFNumber 0x15d28d40 [0x3c0ae0]>{value = +160, type = kCFNumberSInt64Type}
[04:56:53.0845] 4 : <CFString 0x15d2a740 [0x3c0ae0]>{contents = "32"} = <CFNumber 0x15d2a680 [0x3c0ae0]>{value = +320, type = kCFNumberSInt64Type}
[04:56:53.0845] 5 : <CFString 0x15d29f00 [0x3c0ae0]>{contents = "8"} = <CFNumber 0x15d2a490 [0x3c0ae0]>{value = +80, type = kCFNumberSInt64Type}
[04:56:53.0845] 8 : <CFString 0x15d2a690 [0x3c0ae0]>{contents = "64"} = <CFNumber 0x15d299d0 [0x3c0ae0]>{value = +640, type = kCFNumberSInt64Type}
[04:56:53.0845] }
[04:56:53.0845]
[04:56:53.0845] entering load_sep_os
[04:56:53.0845] device has no sep
[04:56:53.0845] entering partition_nand_device
[04:56:53.0845] device supports boot-from-NAND
[04:56:53.0845] nand device is already partitioned
[04:56:53.0845] entering wait_for_storage_device
[04:56:53.0845] Searching for NAND service
[04:56:53.0845] Found NAND service: IOFlashStoragePartition
[04:56:53.0845] NAND initialized. Waiting for devnode.
[04:56:53.0845] entering clear_remap_variable
[04:56:53.0845] executing /usr/sbin/nvram
[04:56:53.0845] entering format_effaceable_storage
[04:56:53.0845] effaceable storage is formatted, clearing it
[04:56:53.0845] effaceable storaged cleared
[04:56:53.0845] entering ramrod_probe_media
[04:56:53.0845] device partitioning scheme is GPT
[04:56:53.0845] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[04:56:53.0845] executing /sbin/fsck_hfs
[04:56:53.0845] ** /dev/rdisk0s1s1
[04:56:53.0845] Executing fsck_hfs (version hfs-227).
[04:56:53.0845] ** Checking Journaled HFS Plus volume.
[04:56:53.0845] ** Detected a case-sensitive volume.
[04:56:53.0845] The volume name is Innsbruck11A465.N90OS
[04:56:53.0845] ** Checking extents overflow file.
[04:56:53.0845] ** Checking catalog file.
[04:56:53.0845] ** Checking multi-linked files.
[04:56:53.0845] ** Checking catalog hierarchy.
[04:56:53.0845] ** Checking extended attributes file.
[04:56:53.0845] ** Checking volume bitmap.
[04:56:53.0845] ** Checking volume information.
[04:56:53.0845] ** Trimming unused blocks.
[04:56:53.0845] ** The volume Innsbruck11A465.N90OS appears to be OK.
[04:56:53.0845] executing /sbin/mount_hfs
[04:56:53.0845] /dev/disk0s1s1 mounted on /mnt1
[04:56:53.0845] entering check_for_restore_log
[04:56:53.0845] found restore log (size = 38353)
[04:56:53.0845] entering unmount_filesystems
[04:56:53.0845] error unmounting '/mnt2': Invalid argument
[04:56:53.0845] entering clean_NAND
[04:56:53.0845] NAND format complete
[04:56:53.0845] entering ramrod_probe_media
[04:56:53.0845] find_filesystem_partitions: storage=/dev/disk0 system= data=
[04:56:53.0845] entering format_storage_for_LwVM
[04:56:53.0845] entering ramrod_probe_media
[04:56:53.0845] device partitioning scheme is GPT
[04:56:53.0845] unexpected partition 'LwVM' - skipping
[04:56:53.0845] find_filesystem_partitions: storage=/dev/disk0s1 system= data=
[04:56:53.0845] entering create_filesystem_partitions
[04:56:53.0845] User specified system partition size, skipping firmware extras size.
[04:56:53.0845] system partition padding size is: 167772160 bytes
[04:56:53.0845] unable to open : No such file or directory
[04:56:53.0845] creating 2 partitions
[04:56:53.0845] creating encrypted data partition
[04:56:53.0845] entering ramrod_probe_media
[04:56:53.0845] device partitioning scheme is GPT
[04:56:53.0845] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[04:56:53.0845] wipe entire partition: 1 (old = 0 new = 1672)
[04:56:53.0845] block size for /dev/disk0s1s1: 8192
[04:56:53.0845] /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1
[04:56:53.0845] executing /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1
[04:56:53.0845] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
[04:56:53.0845] block size for /dev/disk0s1s2: 8192
[04:56:53.0845] /sbin/newfs_hfs -s -v Data -J -P -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s2
[04:56:53.0845] executing /sbin/newfs_hfs -s -v Data -J -P -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s2
[04:56:53.0845] Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive HFS Plus volume with a 8192k journal
[04:56:53.0845] entering ramrod_probe_media
[04:56:53.0845] device partitioning scheme is GPT
[04:56:53.0845] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[04:56:53.0845] entering mount_filesystems
[04:56:53.0845] executing /sbin/fsck_hfs
[04:56:53.0845] ** /dev/rdisk0s1s1
[04:56:53.0845] Executing fsck_hfs (version hfs-227).
[04:56:53.0845] ** Checking Journaled HFS Plus volume.
[04:56:53.0845] ** Detected a case-sensitive volume.
[04:56:53.0845] The volume name is System
[04:56:53.0845] ** Checking extents overflow file.
[04:56:53.0845] ** Checking catalog file.
[04:56:53.0845] ** Checking multi-linked files.
[04:56:53.0845] ** Checking catalog hierarchy.
[04:56:53.0845] ** Checking extended attributes file.
[04:56:53.0845] ** Checking volume bitmap.
[04:56:53.0845] ** Checking volume information.
[04:56:53.0845] ** Trimming unused blocks.
[04:56:53.0845] ** The volume System appears to be OK.
[04:56:53.0845] executing /sbin/mount_hfs
[04:56:53.0845] /dev/disk0s1s1 mounted on /mnt1
[04:56:53.0845] executing /sbin/fsck_hfs
[04:56:53.0845] ** /dev/rdisk0s1s2
[04:56:53.0845] Executing fsck_hfs (version hfs-227).
[04:56:53.0845] ** Checking Journaled HFS Plus volume.
[04:56:53.0845] ** Detected a case-sensitive volume.
[04:56:53.0845] The volume name is Data
[04:56:53.0845] ** Checking extents overflow file.
[04:56:53.0845] ** Checking catalog file.
[04:56:53.0845] ** Checking multi-linked files.
[04:56:53.0845] ** Checking catalog hierarchy.
[04:56:53.0845] ** Checking extended attributes file.
[04:56:53.0845] ** Checking volume bitmap.
[04:56:53.0845] ** Checking volume information.
[04:56:53.0845] ** Trimming unused blocks.
[04:56:53.0845] ** The volume Data appears to be OK.
[04:56:53.0845] executing /sbin/mount_hfs
[04:56:53.0845] /dev/disk0s1s2 mounted on /mnt2
[04:56:53.0845] entering resize_system_partition_to_options
[04:56:53.0845] User specified system partition size, skipping firmware extras size.
[04:56:53.0845] Found SystemPartitionPadding value of 167772160 bytes
[04:56:53.0845] Erasing system partition prior to resize operation.
[04:56:53.0845] block size for /dev/disk0s1s1: 8192
[04:56:53.0845] /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1
[04:56:53.0845] executing /sbin/newfs_hfs -s -v System -J -b 8192 -n a=8192,c=8192,e=8192 /dev/disk0s1s1
[04:56:53.0845] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
[04:56:53.0845] executing /sbin/fsck_hfs
[04:56:53.0845] ** /dev/rdisk0s1s1
[04:56:53.0845] Executing fsck_hfs (version hfs-227).
[04:56:53.0845] ** Checking Journaled HFS Plus volume.
[04:56:53.0845] ** Detected a case-sensitive volume.
[04:56:53.0845] The volume name is System
[04:56:53.0845] ** Checking extents overflow file.
[04:56:53.0845] ** Checking catalog file.
[04:56:53.0845] ** Checking multi-linked files.
[04:56:53.0845] ** Checking catalog hierarchy.
[04:56:53.0845] ** Checking extended attributes file.
[04:56:53.0845] ** Checking volume bitmap.
[04:56:53.0845] ** Checking volume information.
[04:56:53.0845] ** Trimming unused blocks.
[04:56:53.0845] ** The volume System appears to be OK.
[04:56:53.0845] executing /sbin/mount_hfs
[04:56:53.0845] /dev/disk0s1s1 mounted on /mnt1
[04:56:53.0845] Trying to resize system partition to 1753219072 bytes aka 1672 MB
[04:56:53.0845] entering adjust_partition
[04:56:53.0845] partition: requiredSize=214016
[04:56:53.0845] no change in size
[04:56:53.0845] Successfully resized the system partition
[04:56:53.0845] entering maximize_data_partition
[04:56:53.0845] entering adjust_partition
[04:56:53.0845] partition: requiredSize=<<<<<IMEI>>>>>>8
[04:56:53.0845] maximizing data partition to 14201913343 bytes
[04:56:53.0845] entering adjust_partition
[04:56:53.0845] partition: requiredSize=1733632
[04:56:53.0845] no change in size
[04:56:53.0845] Successfully resized data partition to consume free blocks
[04:56:53.0845] The system partition now has a total HFS+ capacity of 1672 MB
[04:56:53.0845] entering ramrod_probe_media
[04:56:53.0845] device partitioning scheme is GPT
[04:56:53.0845] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[04:56:53.0845] entering unmount_filesystems
[04:56:53.0845] entering ramrod_ticket_update
[04:56:53.0845] looking up root ticket hash
[04:56:53.0845] device tree ticket-hash: <CFData 0x15d2ed50 [0x3c0ae0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[04:56:53.0845] ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
[04:56:53.0845] received valid ticket (2735 bytes)
[04:56:53.0845] entering restore_images
[04:56:53.0845] Successfully marked device node /dev/rdisk0s1s1 as static data
[04:56:53.0845] executing /usr/sbin/asr -source asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
[04:56:53.0845] void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
[04:56:53.0845] void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
[04:56:53.0845] ASR: asr: Unable to disable idle sleep - -536870199
[04:56:53.0845] ASR STATUS: start 241.1 multicast-client
[04:56:53.0845] ASR: Waiting for connection attempt from server
[04:56:53.0845] AppleUSBDeviceMux::handleConnectResult new session 0x8b46f898 established 12345<-lo0->49168 12345<-usb->13312
[04:56:53.0845] ASR STATUS: setup
[04:56:53.0845] ASR: Validating target...done
[04:56:53.0845] ASR STATUS: metadata
[04:56:53.0845] ASR: Validating source...
[04:56:53.0845] ASR: done
[04:56:53.0845] ASR: Retrieving scan information...done
[04:56:53.0845] ASR: Validating sizes...done
[04:56:53.0845] ASR STATUS: restore
[04:56:53.0845] ASR RESTORE PROGRESS: 2%
[04:56:53.0845] ASR RESTORE PROGRESS: 4%
[04:56:53.0845] ASR RESTORE PROGRESS: 6%
[04:56:53.0845] ASR RESTORE PROGRESS: 8%
[04:56:53.0845] ASR RESTORE PROGRESS: 10%
[04:56:53.0845] ASR RESTORE PROGRESS: 12%
[04:56:53.0845] ASR RESTORE PROGRESS: 14%
[04:56:53.0845] ASR RESTORE PROGRESS: 16%
[04:56:53.0845] ASR RESTORE PROGRESS: 18%
[04:56:53.0845] ASR RESTORE PROGRESS: 20%
[04:56:53.0845] ASR RESTORE PROGRESS: 22%
[04:56:53.0845] ASR RESTORE PROGRESS: 24%
[04:56:53.0845] ASR RESTORE PROGRESS: 26%
[04:56:53.0845] ASR RESTORE PROGRESS: 28%
[04:56:53.0845] ASR RESTORE PROGRESS: 30%
[04:56:53.0845] ASR RESTORE PROGRESS: 32%
[04:56:53.0845] ASR RESTORE PROGRESS: 34%
[04:56:53.0845] ASR RESTORE PROGRESS: 36%
[04:56:53.0845] ASR RESTORE PROGRESS: 38%
[04:56:53.0845] ASR RESTORE PROGRESS: 40%
[04:56:53.0845] ASR RESTORE PROGRESS: 42%
[04:56:53.0845] ASR RESTORE PROGRESS: 44%
[04:56:53.0845] ASR RESTORE PROGRESS: 46%
[04:56:53.0845] ASR RESTORE PROGRESS: 48%
[04:56:53.0845] ASR RESTORE PROGRESS: 50%
[04:56:53.0845] ASR RESTORE PROGRESS: 52%
[04:56:53.0845] ASR RESTORE PROGRESS: 54%
[04:56:53.0845] ASR RESTORE PROGRESS: 56%
[04:56:53.0845] ASR RESTORE PROGRESS: 58%
[04:56:53.0845] ASR RESTORE PROGRESS: 60%
[04:56:53.0845] ASR RESTORE PROGRESS: 62%
[04:56:53.0845] ASR RESTORE PROGRESS: 64%
[04:56:53.0845] ASR RESTORE PROGRESS: 66%
[04:56:53.0845] ASR RESTORE PROGRESS: 68%
[04:56:53.0845] ASR RESTORE PROGRESS: 70%
[04:56:53.0845] ASR RESTORE PROGRESS: 72%
[04:56:53.0845] ASR RESTORE PROGRESS: 74%
[04:56:53.0845] ASR RESTORE PROGRESS: 76%
[04:56:53.0845] ASR RESTORE PROGRESS: 78%
[04:56:53.0845] ASR RESTORE PROGRESS: 80%
[04:56:53.0845] ASR RESTORE PROGRESS: 82%
[04:56:53.0845] ASR RESTORE PROGRESS: 84%
[04:56:53.0845] ASR RESTORE PROGRESS: 86%
[04:56:53.0845] ASR RESTORE PROGRESS: 88%
[04:56:53.0845] ASR RESTORE PROGRESS: 90%
[04:56:53.0845] ASR RESTORE PROGRESS: 92%
[04:56:53.0845] ASR RESTORE PROGRESS: 94%
[04:56:53.0845] ASR RESTORE PROGRESS: 96%
[04:56:53.0845] ASR RESTORE PROGRESS: 98%
[04:56:53.0845] ASR: 2013-09-22 04:49:03.559 asr[21:1503] CFPreferences: user home directory at file:///var/root/ is unavailable. User domains will be volatile.
[04:56:53.0845] AppleUSBDeviceMux::sessionUpcall socket is closed, session 0x8b46f898 (12345<-lo0->49168 12345<-usb->13312)
[04:56:53.0845] ASR RESTORE PROGRESS: 100%
[04:56:53.0845] ASR: Copied 1585750528 bytes in 188.63 seconds, 8209.76 KiB/s
[04:56:53.0845] ASR STATUS: verify
[04:56:53.0845] ASR VERIFY PROGRESS: 2%
[04:56:53.0845] ASR VERIFY PROGRESS: 4%
[04:56:53.0845] ASR VERIFY PROGRESS: 6%
[04:56:53.0845] ASR VERIFY PROGRESS: 8%
[04:56:53.0845] ASR VERIFY PROGRESS: 10%
[04:56:53.0845] ASR VERIFY PROGRESS: 12%
[04:56:53.0845] ASR VERIFY PROGRESS: 14%
[04:56:53.0845] ASR VERIFY PROGRESS: 16%
[04:56:53.0845] ASR VERIFY PROGRESS: 18%
[04:56:53.0845] ASR VERIFY PROGRESS: 20%
[04:56:53.0845] ASR VERIFY PROGRESS: 22%
[04:56:53.0845] ASR VERIFY PROGRESS: 24%
[04:56:53.0845] ASR VERIFY PROGRESS: 26%
[04:56:53.0845] ASR VERIFY PROGRESS: 28%
[04:56:53.0845] ASR VERIFY PROGRESS: 30%
[04:56:53.0845] ASR VERIFY PROGRESS: 32%
[04:56:53.0845] ASR VERIFY PROGRESS: 34%
[04:56:53.0845] ASR VERIFY PROGRESS: 36%
[04:56:53.0845] ASR VERIFY PROGRESS: 38%
[04:56:53.0845] ASR VERIFY PROGRESS: 40%
[04:56:53.0845] ASR VERIFY PROGRESS: 42%
[04:56:53.0845] ASR VERIFY PROGRESS: 44%
[04:56:53.0845] ASR VERIFY PROGRESS: 46%
[04:56:53.0845] ASR VERIFY PROGRESS: 48%
[04:56:53.0845] ASR VERIFY PROGRESS: 50%
[04:56:53.0845] ASR VERIFY PROGRESS: 52%
[04:56:53.0845] ASR VERIFY PROGRESS: 54%
[04:56:53.0845] ASR VERIFY PROGRESS: 56%
[04:56:53.0845] ASR VERIFY PROGRESS: 58%
[04:56:53.0845] ASR VERIFY PROGRESS: 60%
[04:56:53.0845] ASR VERIFY PROGRESS: 62%
[04:56:53.0845] ASR VERIFY PROGRESS: 64%
[04:56:53.0845] ASR VERIFY PROGRESS: 66%
[04:56:53.0845] ASR VERIFY PROGRESS: 68%
[04:56:53.0845] ASR VERIFY PROGRESS: 70%
[04:56:53.0845] ASR VERIFY PROGRESS: 72%
[04:56:53.0845] ASR VERIFY PROGRESS: 74%
[04:56:53.0845] ASR VERIFY PROGRESS: 76%
[04:56:53.0845] ASR VERIFY PROGRESS: 78%
[04:56:53.0845] ASR VERIFY PROGRESS: 80%
[04:56:53.0845] ASR VERIFY PROGRESS: 82%
[04:56:53.0845] ASR VERIFY PROGRESS: 84%
[04:56:53.0845] ASR VERIFY PROGRESS: 86%
[04:56:53.0845] ASR VERIFY PROGRESS: 88%
[04:56:53.0845] ASR VERIFY PROGRESS: 90%
[04:56:53.0845] ASR VERIFY PROGRESS: 92%
[04:56:53.0845] ASR VERIFY PROGRESS: 94%
[04:56:53.0845] ASR VERIFY PROGRESS: 96%
[04:56:53.0845] ASR VERIFY PROGRESS: 98%
[04:56:53.0845] ASR VERIFY PROGRESS: 100%
[04:56:53.0845] ASR: Verified SHA-1 checksum 1585750528 bytes in 40.36 seconds, 38365.77 KiB/s
[04:56:53.0845] ASR STATUS: finish
[04:56:53.0845] entering ramrod_probe_media
[04:56:53.0845] device partitioning scheme is GPT
[04:56:53.0845] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
[04:56:53.0845] entering mount_filesystems
[04:56:53.0845] executing /sbin/fsck_hfs
[04:56:53.0845] ** /dev/rdisk0s1s1
[04:56:53.0845] Executing fsck_hfs (version hfs-227).
[04:56:53.0845] ** Checking Journaled HFS Plus volume.
[04:56:53.0845] ** Detected a case-sensitive volume.
[04:56:53.0845] The volume name is Innsbruck11A465.N90OS
[04:56:53.0845] ** Checking extents overflow file.
[04:56:53.0845] ** Checking catalog file.
[04:56:53.0845] ** Checking multi-linked files.
[04:56:53.0845] ** Checking catalog hierarchy.
[04:56:53.0845] ** Checking extended attributes file.
[04:56:53.0845] ** Checking volume bitmap.
[04:56:53.0845] ** Checking volume information.
[04:56:53.0845] ** Trimming unused blocks.
[04:56:53.0845] ** The volume Innsbruck11A465.N90OS appears to be OK.
[04:56:53.0845] executing /sbin/mount_hfs
[04:56:53.0845] /dev/disk0s1s1 mounted on /mnt1
[04:56:53.0845] executing /sbin/fsck_hfs
[04:56:53.0845] ** /dev/rdisk0s1s2
[04:56:53.0845] Executing fsck_hfs (version hfs-227).
[04:56:53.0845] ** Checking Journaled HFS Plus volume.
[04:56:53.0845] ** Detected a case-sensitive volume.
[04:56:53.0845] The volume name is Data
[04:56:53.0845] ** Checking extents overflow file.
[04:56:53.0845] ** Checking catalog file.
[04:56:53.0845] ** Checking multi-linked files.
[04:56:53.0845] ** Checking catalog hierarchy.
[04:56:53.0845] ** Checking extended attributes file.
[04:56:53.0845] ** Checking volume bitmap.
[04:56:53.0845] ** Checking volume information.
[04:56:53.0845] ** Trimming unused blocks.
[04:56:53.0845] ** The volume Data appears to be OK.
[04:56:53.0845] executing /sbin/mount_hfs
[04:56:53.0845] /dev/disk0s1s2 mounted on /mnt2
[04:56:53.0845] entering install_kernel_cache
[04:56:53.0845] writing kernelcache to /mnt1/System/Library/Caches/com.apple.kernelcaches/kernelcache
[04:56:53.0845] entering install_secure_vault_daemon
[04:56:53.0845] entering get_hardware_platform
[04:56:53.0845] platform-name = s5l8930x
[04:56:53.0845] linking /mnt1/usr/sbin/securekeyvaultd to /mnt1/usr/sbin/securekeyvaultd.s5l8930x
[04:56:53.0845] no securekeyvaultd for s5l8930x
[04:56:53.0845] entering ramrod_ticket_write
[04:56:53.0845] writing ticket to /mnt1/System/Library/Caches/apticket.der
[04:56:53.0845] entering update_device_firmware
[04:56:53.0845] create_baseband_update_options: Got imeisv: 20
[04:56:53.0845] baseband updater options = <CFBasicHash 0x15d2f6e0 [0x3c0ae0]>{type = mutable dict, count = 3,
[04:56:53.0845] entries =>
[04:56:53.0845] 0 : <CFString 0x1b7248 [0x3c0ae0]>{contents = "IMEISwVersion"} = <CFNumber 0x15d2f830 [0x3c0ae0]>{value = +20, type = kCFNumberSInt32Type}
[04:56:53.0845] 1 : <CFString 0x1b72a8 [0x3c0ae0]>{contents = "autoSetupEnv"} = <CFBoolean 0x3c0e98 [0x3c0ae0]>{value = false}
[04:56:53.0845] 2 : <CFString 0x1b72b8 [0x3c0ae0]>{contents = "disablePing"} = <CFBoolean 0x3c0e90 [0x3c0ae0]>{value = true}
[04:56:53.0845] }
[04:56:53.0845]
[04:56:53.0845] _baseband_update_requires_system_filesystem_once: querying baseband to determine if it requires system filesystem
[04:56:53.0845] _baseband_update_requires_system_filesystem_once: query returned <CFBasicHash 0x15d2eec0 [0x3c0ae0]>{type = immutable dict, count = 1,
[04:56:53.0845] entries =>
[04:56:53.0845] 0 : <CFString 0x1b7018 [0x3c0ae0]>{contents = "requireSystemPartitionMount"} = <CFBoolean 0x3c0e98 [0x3c0ae0]>{value = false}
[04:56:53.0845] }
[04:56:53.0845]
[04:56:53.0845] entering update_iBoot
[04:56:53.0845] found 'AppleImage3NORAccess' object in IORegistry
[04:56:53.0845] entering update_iBoot_image3_NOR_access
[04:56:53.0845] write_image3_data: flashing illb data (length = 0x209d9)
[04:56:53.0845] write_image3_data: flashing SCAB data (length = 0xaf0)
[04:56:53.0845] ticket updated
[04:56:53.0845] write_image3_data: flashing ibot data (length = 0x4518c)
[04:56:53.0845] write_image3_data: flashing chg1 data (length = 0x88cc)
[04:56:53.0845] write_image3_data: flashing bat0 data (length = 0xaa4c)
[04:56:53.0845] write_image3_data: flashing batF data (length = 0x1484c)
[04:56:53.0845] write_image3_data: flashing logo data (length = 0x1a8c)
[04:56:53.0845] write_image3_data: flashing recm data (length = 0x10f4c)
[04:56:53.0845] write_image3_data: flashing dtre data (length = 0x1234c)
[04:56:53.0845] write_image3_data: flashing chg0 data (length = 0x260c)
[04:56:53.0845] write_image3_data: flashing bat1 data (length = 0x80c)
[04:56:53.0845] write_image3_data: flashing glyP data (length = 0x2e4c)
[04:56:53.0845] AppleImage3NORAccess::_getSuperBlock imageVersion: 3
[04:56:53.0845] AppleImage3NORAccess::_getSuperBlock imageVersion: 3
[04:56:53.0845] [nand_part_core:INF@2289] first 2 pages of boot blocks written with copies of partition table
[04:56:53.0845] entering update_gas_gauge
[04:56:53.0845] entering update_ir_mcu
[04:56:53.0845] looking for mcu nub...no entry from path!
[04:56:53.0845] TiSerialFlasher not supported on this platform. Exiting.
[04:56:53.0845] entering update_baseband
[04:56:53.0845] update_baseband: registering for progress notifications
[04:56:53.0845] create_baseband_update_options: Got imeisv: 20
[04:56:53.0845] baseband updater options = <CFBasicHash 0x15d2fed0 [0x3c0ae0]>{type = mutable dict, count = 6,
[04:56:53.0845] entries =>
[04:56:53.0845] 0 : <CFString 0x1b71f8 [0x3c0ae0]>{contents = "SystemRoot"} = <CFString 0x15d2ee90 [0x3c0ae0]>{contents = "/mnt1"}
[04:56:53.0845] 1 : <CFString 0x1b7248 [0x3c0ae0]>{contents = "IMEISwVersion"} = <CFNumber 0x15d2feb0 [0x3c0ae0]>{value = +20, type = kCFNumberSInt32Type}
[04:56:53.0845] 2 : <CFString 0x1b72a8 [0x3c0ae0]>{contents = "autoSetupEnv"} = <CFBoolean 0x3c0e98 [0x3c0ae0]>{value = false}
[04:56:53.0845] 3 : <CFString 0x1b7188 [0x3c0ae0]>{contents = "forceUpdate"} = <CFBoolean 0x3c0e90 [0x3c0ae0]>{value = true}
[04:56:53.0845] 5 : <CFString 0x1b72b8 [0x3c0ae0]>{contents = "disablePing"} = <CFBoolean 0x3c0e90 [0x3c0ae0]>{value = true}
[04:56:53.0845] 6 : <CFString 0x1b71a8 [0x3c0ae0]>{contents = "DisallowFusiing"} = <CFBoolean 0x3c0e90 [0x3c0ae0]>{value = true}
[04:56:53.0845] }
[04:56:53.0845]
[04:56:53.0845] update_baseband: querying baseband info
[04:56:53.0845] bbupdater: Opening device path /dev/cu.debug, using baud 115200
[04:56:53.0845] bbupdater: Configuring Hardware Mux...bbupdater: OK
[04:56:53.0845] bbupdater: [1379825425.342938 : 13.00]::: powercycle
[04:56:53.0845] bbupdater: - Ping failed, trying again, 48 tries left
[04:56:53.0845] bbupdater: - Ping failed, trying again, 47 tries left
[04:56:53.0845] [nand_part_core:INF@3169] next 87 pages of boot blocks written with LLB image of size 133632 bytes
[04:56:53.0845] [nand_part_core:INF@3172] final 39 pages of boot blocks left unprogrammed
[04:56:53.0845] bbupdater: - Ping failed, trying again, 46 triesTry to Restore your iPhone on a different computer to see if it is iPhone or computer problem.
-
I have an iPhone 4S and never had a problem with syncing it. But suddenly, when I connected my phone to my mac, it says that its in recovery mode, and I need to restore it in order to sync. I've updated both my phone and my itunes, and it didnt work.Help?
fighter19lisa wrote:
that only makes it say its synced, when its not.
No, it does not. It transfers purchases from the iDevice to the computer. The computer must be authorized for the Apple ID that the content was acquired with.
fighter19lisa wrote:
my playlists wont show up on the phone.
Are they selected to sync? Is Manually Manage content on the device selected?
fighter19lisa wrote:
i had to change my password for my aol account again and i still cannot get my email on my phone to even work
What does that have to do with syncing content to the device? FYI, nothing. -
Okay, so I got an iPod touch, 4th gen, 32gb, brand new and running perfectly fine two years ago. Used it for about six months, lost it, and finally found it again a month ago tucked away in my recliner. It was as dead as a doornail, but I had it charged up and ready to go in a few hours.
So I wanted to get a special app for my iHome, as well as spend all of my accumulated iTunes cards that were previously useless due to the fact that I had lost my iPod for a year and a half. The app store said I had to update to the current software to download anything new, so I did just that about half an hour ago, updating to the latest version of iTunes and downloading the new software for my iPod like I was supposed to.
Only when I applied it to my iPod, it went into Recovery Mode as expected, but I can't restore it! I've made sure there's no extra USB attachments in it, my firewalls are currently down to get around this stupid thing (just turned them back on because it wasn't working), and feeling like I just let all this money slip down the drain.
If you have any relevant advice, please help! I'm running on Windows 7 with the current version of iTunes (64 bit). Help!Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
Can't get iPhone 4s out of recovery mode and always get error 40 during restore
I tried updating to ios 6.1.2 and I left it for a while since I had to do some stuff. When I came back, my iPhone is in recovery mode and I can't get it to restore using itunes. I always get error 40. I tried restoring on a different pc but it's still a no go. Is it possible that this has something to do with the hardware? I've already looked up possible solutions but my iphone's still in recovery mode. I never had this phone opened nor did I attempt to jailbreak it or anything. I tried asking my carrier for assistance but they're charging me for repairs. The fee's pretty expensive.
Read here:
http://support.apple.com/kb/ts3694#error40
Usually caused by security software on your computer.
Maybe you are looking for
-
I have an 11/2007 MBP... 4 yrs, 2 months and 3 weeks old tomorrow. Yesterday I got the "black screen of death". I won't bore you with what I tried, but today a local expert assessed the situation: reset SMC and PRAM, noted that it booted into target
-
Reinstalling Mountain Lion with a Bootcamp partition present
My OSX10.8 partition has failed, not even allowing the Recovery function to reinstall Mountain Lion, or to restore from my Time Machine. So I assume I will need to reformat the drive using Disk Utility, then reinstall the OSX. BUT - I have an old Boo
-
IOS device streaming working perfect but f4m quit on PC's now.
The first event I streamed tonight worked fine for an hour or so then it stopped being accessible from the web . I had no problem viewing the stream on mobile devices though. The log file shows these errors. 2011-12-27 16:58:39 4172 (e)2611178 Error
-
Where is 10.1.0.2 when I need it ??????????????????????????????????????????
I want the most current ODBC driver for an Oracle 10g database. I've downloaded the 10.1.0.5.0 drivers, but they require the installer that ships with 10.1.0.2.0. That version 10.1.0.2.0 isn't on the download site. Where is it, how do I install the O
-
Happy 3G day everyone! I've taken off of work today and already completed the work I needed to for the day (Faxed some stuff and had a phone conference and went through my emails from overnight) I have nothing to do today but to wait! So did you take