Restore Reporting Services on another Server

Hello All,
I have a server A running reporting services which is used by everyone. I also have Server B (backup server) that has reporting services running on it. I want to restore the server B with current version of reporting services database (from Server A) just
in case if the Server A goes down. Can anybody help me with this? Thanks.
Regards,
Amol

see
http://technet.microsoft.com/en-us/library/ms156421.aspx
http://technet.microsoft.com/en-us/library/ms155814.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Similar Messages

Reporting Services through ISA server for All Authenticated Users

Hello colleagues.
I have MS SQL 2012 server with Reporting Services and it work via link:
https://reports2.domain.com/reports
In LAN all work fine, but I want publish this resource via ISA for All Authenticated Users.
When in publish rule I configure (in Condition) "All users" - all work fine, but when I configure "All Authenticated Users" - I have trouble on web form on
https://reports2.domain.com/reports/Pages/Report.aspx?ItemPat... - scripts not work, because it run how "anonymous" (I see on ISA logging) and ISA block scripts.
I can't use "All Users", because it's not secure.
Maybe somebody publish Reporting Services through ISA server for All Authenticated Users?
OR maybe - how on Reporting Services configure Negotiate authenticated for scripts?

Hi Alexander,
All users or applications who request access to report server content or operations must be authenticated using the authentication type configured on the report server before access is allowed. The AuthenticationType named RSWindowsNegotiate is supported
by Reporting Services. To configure Windows Authentication on the Report Server, please see:
http://msdn.microsoft.com/en-us/library/cc281253(v=sql.110).aspx
Besides, we can publish report server via ISA server. Please note that you should use a new web port number with a new listener which shouldn’t be used by other web site for report server. Reference:
http://social.technet.microsoft.com/Forums/forefront/en-US/1cc68996-1ce6-4d88-a30d-2bfd13fba06e/how-to-publish-ssrs-2008-through-isa-2006?forum=Forefrontedgegeneral
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support
Katherine thanks for answer.
Report Server service started as Domain account.
I have in RSReportServer.config this:
<Authentication>
<AuthenticationTypes>
<RSWindowsNegotiate />
</AuthenticationTypes>
<RSWindowsExtendedProtectionLevel>Allow</RSWindowsExtendedProtectionLevel>
<RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
<EnableAuthPersistence>true</EnableAuthPersistence>
</Authentication>
In web.config I have this:
<authentication mode="Windows" />
<identity impersonate="true" />
I can go (from Internet through ISA) to
https://reports2.domain.com/reports and LogOn Authentication is work, but scripts not work, because it run how "anonymous" (I see this on ISA logging) and ISA block scripts.
Do you know where in Reporting Services configure run scripts with Negotiate authentication?

Reporting Services of SQL Server 2005 in SAP B1

Hi,
Can I used Reporting Services of SQL Server 2005 in SAP B1? If yes then please guide me how can I do it. If not then is it possible to use these services in 8.8 version?
Regards,
Ghazanfar

Hi Ghazanfar,
The answer is YES. You may check this blog:
/people/community.user/blog/2008/07/04/sql-server-reporting-magic
Thanks,
Gordon

[Forum FAQ] How do I disable all subscriptions without disabling Reporting Services and SQL Server Agent?

Introduction
There is the scenario that users configured hundreds of subscriptions for reports. Now they want to disable all the subscriptions, but Reporting Services and SQL Server Agent service should be enable, so the subscriptions will not delivery reports to users
and users could run the reports and create jobs on the server.
Solution
To achieve this requirement, we need to list all subscriptions and their schedules by running query, then use loop statement to disable all the subscription schedules by Job name.
On the Start menu, point to All Programs, point to Microsoft SQL Server instance, and then click SQL Server Management Studio.
Type Server name and select Authentication, click Connect.
Click New Query in menu to open a new Query Editor window.
List all subscriptions and their schedules by running the following query:
Use ReportServer
go
SELECT   c.[Name] ReportName,
s.ScheduleID JobName,
ss.[Description] SubscriptionDescription,
ss.DeliveryExtension SubscriptionType,
c.[Path] ReportFolderPath,
row_number() over(order by s.ScheduleID) as rn
into
#Temp
FROM
ReportSchedule rs
INNER JOIN Schedule s ON rs.ScheduleID = s.ScheduleID
INNER JOIN Subscriptions ss ON rs.SubscriptionID = ss.SubscriptionID
INNER JOIN [Catalog] c ON rs.ReportID = c.ItemID AND ss.Report_OID = c.ItemID
select * from #temp
Use the loop statement to disable all the subscription schedules by Job name:
DECLARE
@count INT,
@maxCount INT
SET @COUNT=1
SELECT @maxCount=MAX(RN)
FROM
#temp
DECLARE
@job_name VARCHAR(MAX)
WHILE @COUNT <=@maxCount
BEGIN
SELECT @job_name=jobname FROM #temp WHERE RN=@COUNT
exec msdb..sp_update_job @job_name = @job_name,@enabled = 0
SET @COUNT=@COUNT+1   P
RINT @job_name
END
PRINT @COUNT
Reference
SQL Agent – Disable All Jobs
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012
Reporting Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

How To Use Reporting Services On SQL Server 2000 ?

Hi all .
Today , I has a issue .
Normal , if the customer use SQl Server 2005 , it is no proplem , so if use SQL Server 2000 , Now , I want to use Reporting services on SQL Server 2000 , but , I am searching on Internet , so I know , if I want to use SQL 2000 reporting server , I must have license of SQL server 2000 .
is Every body idea for this issue ? .
Please help me .
Thanks alot .

Ok ,anyway thanks alot ,.

SQL Server Reporting Services in SQL Server Express 2012

I installed SQL Server Express 2012 but cannot find SQL Server Reporting Services.
Is it possible to use SSRS in SQL Server Express 2012?
If possible, where do I get so that I could install it and make environment?

Hi ,
Did you get a chance to look into the below link
http://blogs.msdn.com/b/mvpawardprogram/archive/2014/03/10/adding-sql-server-express-2012-advanced-services-to-existing-development-environment.aspx
Best Regards Sorna

Migrating Reporting Services to new Server - Subscriptions are not transfering

Hello,
I have an instance of SQL Server 2008R2 running on Windows Server 2008. It is setup to be a reporting server. There are many subscriptions that are scheduled and run on this server. We are wanting to move to Windows Server 2012 and SQL Server
2012. So, we have built out a new VM and I have exported from the current server the ReportServer and ReportServerTempDB and have imported them to the new server. I have resolved the one Orphaned user that happened and went to look for the subscriptions
so that I could disable them so they wouldn't run. I could not find any.
select * from msdb.dbo.sysjobs where enabled = 1 and category_id = 100.
no rows...
I had read from other posts to let it sit for a few days and they will appear. I have waited 2 weeks.
So, what am I missing? I would prefer to do a clean install and migrate the data over rather than upgrading the OS and SQL.
Thanks

Hi Sql Dude,
Per my undersranding that you can't find any informamation related to the subscription in the sydjobs table after migration, right?
You issue can be caused by many factors.Please check details information below:
Please check if you can see all the subscription in the report manager and can create new subscriptions. The ReportServer database used by SSRS to store the subscriptions maintains a record of the subscription owner (as well as audit fields) which track
the user accounts that have created/modified the subscriptions.
If you can't see subscription on the report manager and can create new subscriptions, the issue can be caused by "My subscriptions" had been created on the original non-domain server(Local User account). Therefore, once the instance was migrated
to a new server on the domain, said Local User was no longer available. Every user with access to the ReportServer database has an entry created in the Users table and a unique GUID generated.
To work around the issue, you can do a SQL Update query to changed the OwnerID and ModifiedByID fields on the Subscriptions table to relate to the GUID of the equivalent user on the domain.Tip:
Change the Owner of SQL Reporting Services Subscription
If you can see all the subsription on the report manager but can't find any job, please try to edit and update the subscription to see if it will recreate the job again and please also try to provide more details information in the log file to see if you
got some error message, the path like:
C:\Program Files\Microsoft SQL Server\MSRS11.SQLEXPRESS\Reporting Services\LogFiles
If above didn't help, please reference to the similar thread below:
Can't access SSRS 2008 R2 subscriptions after migration
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Service Accounts for Reporting Service in SQL Server Failover Cluster setup

I am setting up 2 Report Services (SSRS) in SQL Failover Clustering (Version: 2012SP1) on Windows 2012, as part of scale out architecture.
There are 2 options to configure the service account for SSRS:
Option 1) Using domain accounts, as what I have done for DB Engine and SQL Agent.
Option 2) accept the default, which is virtual account for SSRS. Per documentation URL:
http://msdn.microsoft.com/en-us/library/ms143504.aspx
which is the recommended one? is it option 2?
There is security note on above URL as well, but does not clearly mention that option 1 is not recommended.
Security Note: Always run SQL Server services by using the lowest possible user rights. Use a MSA or virtual account when possible. When MSA and virtual accounts are not possible, use a specific low-privilege user account or domain account instead
of a shared account for SQL Server services. Use separate accounts for different SQL Server services. Do not grant additional permissions to the SQL Server service account or the service groups. Permissions will be granted through group membership or granted
directly to a service SID, where a service SID is supported.
Thanks very much for your help!

Hi Luo Donghua,
In SQL Server Failover Cluster Instance, personally two options can run well. If you use the virtual account for SQL Server Reporting Service. Virtual accounts in Windows Server 2008 R2 and Windows 7 are managed local accounts that provide the features to
simplify service administration. The virtual account is auto-managed, and the virtual account can access the network in a domain environment.
Of cause, you can also use domain accounts in your clustering.
Just make sure your service account is set up here, or that it is using a proper built-in account.For more information, see:http://ermahblerg.com/2012/11/08/cluster-ssrs-in-2008/
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

Trying to install features for PowerPivot and Reporting Services from SQL Server 2012 with SP2, but no access to key?

Hi,
I had installed SQL Server 2012 PowerPivot on WFE and App Server. This is test farm with 1 WFE and 1 APP and 1 SQL Server.
However, we had a heap of issues with Windows Claims Authentication and PowerPivot - issues were raised with "unable to make a connection to EntityDataSource" . Now we uninstalled the PowerPivot and Reporting Services features and wanted to install
with the SQL Server 2012 with SP2. Originally SP2 was installed seperately and we had read there had been issues.
Anyway on trying to install the features again using the SQL Server 2012 with SP2 iso I get
Could not open key UNKNOWN\Components
I don't want to start deleting or changing permissions as quite dodgey. What is this key for anyway and how do I resolve my issue.
Thanks.
John.

Hi John,
Did you meet the error message during the process of configuring the PowerPivot for SharePoint?
If yes, I suppose that the existing features or components have not been uninstalled completely.
I recommend to delete the two keys left when uninstalling the PowerPivot and please make a copy of the registry keys before you delete the two keys:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\ServiceProxies\Microsoft.AnalysisServices.Sharepoint.Integration.MidTierServiceProxy
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared Tools\Web Server Extensions\15.0\WSS\ServiceProxies\Microsoft.AnalysisServices.Sharepoint.Integration.MidTierServicea
Please check the steps in the link below to see if there anything wrong when you uninstalling the PowerPivot and then re-install it to see how it works:
https://technet.microsoft.com/en-us/library/ff487866(v=sql.110).aspx
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Report Services Install - SQL Server 2012 instance blank

I have looked at all the links and tried the suggestions and I am still having the problem:
SCCM 2012 R2 SQL 2012 SP1 SSRS installed and configured (separate boxes)
When I try to add the reporting services role, it finds the SCCM database and verifies connectivity to it, the SSRS instance drop down is blank.
Using a domain service accout with local admin rights on both machines and sa rights in SQL.
There is a firewall between the Primary Server and the SQL Server and ports 80, 135, 443, 445, 1433 and the high RPC range.
Does anyone know how it is determining the instance? I have read it is via WMI but I am not sure if it is a query or executing a method. I have verified the svc acct has the correct DCOM privs.

Hi Jo75,
According to my understanding, you get the error message “Unable to connect to the database: Network error IOException: Connection refused: connect” when you connect to the SQL Server database
during installation of Trend Micro's DSM.
Based on my test, I was able to connect to the SQL Server database with the user name “sa” during the installation of Deep Security Manager and no error message appeared. Besides, I created
a new SQL Server login and it also worked fine.
Make sure you can connect to the SQL Server instance successfully, you can follow these steps:
1. Open SQL Server Management Studio and click Database Engine from pull-down menu of Connect in Object Explorer.
2. In the Server name box, you should type hostname\instance name. And you should choose SQL Server Authentication in Authentication box and type “sa” in Login box, then type your password
and click Connect.
If you can’t connect to SQL Server, you can try to create a new login and give it full permission. Please follow these steps:
1. Open SQL Server Management Studio and connect to SQL Server with administrator account.
2. Click Security and right click Logins then choose New Login.
3. In General page, type your new Login name and choose SQL Server Authentication, then set your password.
4. Click Server Roles
at
the
top-left
corner
and check the dbcreator box.
5. Click Status at the top-left corner and check enabled under the login, then click ok.
6. Click the database you want to connect during the installation of Deep Security Manager, expand the security and right click the users, then choose New User.
7. Type your user name and login name in General page. Click Owned Schemas page and check db_owner. Also check db_owner in Membership page then click ok.
8. Retry install Deep Security Manager.
Please follow these steps and how it works.
Best regards,
Qiuyun Yu

Restore database noarchivelog to another server in ASM

I have to migrate a database 10g with noarchivelog with filesystem to another server with ASM.
Could you help me to do it?
Thanks.

ok, I put the database in archivelog but I don`t understando the link "http://www.oracleflash.com/10/How-to-migrate-Oracle-datafiles-to-ASM-storage-via-RMAN.html".
First, I have moved the database to the new server, now I have the database with filesystem but in the final server with archivelog. OK.
The steps are:
first, I have to modify the parameters of db_create_file_dest, etc, to +ASM.
I hve to shutdown the database, open nomount, restore controlfile and backup as copy.
Is it correct?,
one question, the restore controlfile, I suppose that I have to have a previous backup with filesystem of controlfile?
Thanks.

Restore Rman backup on another server

Hi.,
I am taking oracle 10g rman Incremental backup level 1
on Sunday I am taking full backup.
No Repository catlog is used.
I want to restore all the database using the backup of RMAN on the another server .
Can you tell mi whats are the step to restore on another server .

http://download-uk.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmrecov002.htm#sthref723

Build form and report on APEX RESTful service on another server

Hi guys,
I have been stuck with this for long time.
I have this web service on server A ( an exposed report as web service )
http://brown.maxapex.com/apex/apex_rest.getReport?app=112&page=8&reportid=REST
- I exe this command on server A
select utl_http.request('http://apex.oracle.com') from dual;
and did not get error which indicates that the Network resources are available.
I need to build a form and report based on that service on server B. But I could not. Can you help pls ??
work space : fam
user: test
password: test
Application 49141
user: fateh
password: fateh
Regards,
Fateh

Hi guys,
Pls, answer my questions. I am at the final stage of the game ..
Regards,
Fateh

Restore 9i Database to Another Server but Same Database Name

hi experts,
This is 9i on Windows.
I want to restore my RMAN backup from production server to my test server.
I know the db names have to be the same for RMAN to work.
Can I restore from my full backup -- test server, then change the db name on the test server? The database name on test needs to be different to prevent someone from accidentally connecting to test but thinking it is production.
Is this possible to do?
Again, 9i on Windows.
Thanks, John

Hi piontkdd
I do this in 9i all time, without using duplicate.
General idea:
Copy rman backups to test server
create dummy init.ora with production database name.
if you want, SET NEWNAME for different filesystem and restore datafiles.
Recover database. Open database.
alter database rename global_name to 'whatever'
shutdown and then mount. use nid.sh to change the DBID and Database name (Can't remember how you do this on windows). shutdown and set up your new spfile/init.ora and change your services with oradim.exe
could you elaborate the same steps i have the scenario to make sure my production database works fine in case of any disaster , on the production machine itself i have to restore database.
Oracle=9.2 Solaris=9 Veritas=6.0
Regards

How to restore a Db on another server

Hello All,
MaxDb 7.6.00.37.
I need to copy my database from server A (Windows 2000) to Server B (Windows 2003).
So i've installed the same version of MaxDb on server B, copy the last full backup from server A to server B, create the database instance using the parameters found in the backup file (changed some path, i.e. for datavolume, log volume...), and then run a restore...
But after approx 500Mb of data restored, i get message -24998 and -7900, which says that the block size have changed bewteen backup and restore ! If a take a look on backup media properties, everything match bewteen server A and Server B.
Does anybody have an idea ?
TIA.
Frédéric DEMILLY.
Edited by: Frédéric DEMILLY on Feb 25, 2008 1:14 PM

Hi Frédéric,
the blocking size of the backups are determined by the DATA_IO_BLOCK_COUNT
parameter (used to be the BACKUP_BLOCK_CNT parameter in earlier versions).
The value of this parameter dictates the blocking size for backups if no other value is specified in the backup media definition.
So I would recommend to check the value of this parameter (although you copied the parameters from the backup).
Also quite possible: the backup file could have been corrupted.
Does a recover_check work?
What if you copy the file back to server A and run a recover_check there?
KR Lars

Restore Reporting Services on another Server

Similar Messages

Maybe you are looking for