Restore settings iphone troubleshoot
I was having trouble getting my email. So after trying everything else I restore settings.
When it powered back up I got the first screen saying to pick language, which i did, then country, which i did, location services, done. Wi-fi... done. Problem occurs on next step. I chose to restore from itunes back up. Connected phone to computer and conected to itunes. Itunes performs the back up and then it just sits on this screen. It will not go any further. Any ideas???? Help please!
I reset all settings. I did not do a restore. Not sure if this matters.
Went to settings on phone, reset and reset all settings.
Similar Messages
-
I am selling my ipone 3G and restored settings and content and since then it will not restart. Anyone have any ideas on what's wrong. It was working fine up until doing this.
Hi,
See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
I connected my new iPhone 5 to my (now fully updated after two separate operating system upgrades!) MacBook Pro so that I could add my music to my new phone. Rather than configuring it as a new iPhone, I chose to configure it as my old iPhone, thinking that this would make it easier for my music to be there. WRONG. Now my new iPhone 5 looks exactly like my old iPhone 4 did in OCTOBER, 2012 - photos, messages, contacts... anything done since then is gone (that was the last time I had backed up my old phone, which unfortunately was not connected to the cloud and is also lost somewhere in a New England lake :-(). What I could really, really use help with is finding out if I can have a do-over on my choice and at least get my new phone looking/acting like the new phone it is, and bonus would be to have the photos and videos I took with it this past weekend (it's only five days old!) restored. Please help!
Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.
-
As the subject suggests I want to restore my iPhone 4 to it's factory settings and am wondering if I need to have an internet and/or itunes connection in order to do that? I just don't want to get 1/2 way through the reset and get stuck because I don't have the required connections..
I DON'T want to restore any of the back-ups! I want to start from scratch..
Any help would be appreciated!
Thank youThank you Lawrence, I did think that was the case, but it has been a long time since I have had to do it and couldn't remember.
I will have to wait until I get home tonight to do it -
for some reason , when i restore my iphone 4s to factory settings my headphones work when listening to music or youtube videos but when i backup my information onto it , it only comes out of one ear bud and i just got a new one from the apple store. my old iphone 4s audio jack was messed up but i just got a new one with my warranty , can anyone help me please.
It doesn't matter what it is in your backup that's causing the problem because you can not selectively restore things from your backup. It's all or nothing.
Set you phone up as a new device and start over. -
How can i sync my iphone to a new computer without restoring settings and deleting everything?
I've just gotten a new desktop computer and I'd love to have my iPhone synced to it...but I cannot do that without "restoring" settings or erasing my current library to sync to this new library. The problem is I have absolutely nothing on this new computer and I do not wish to delete anything on my phone... what's the best way to go about this without losing any of my notes, photos, contacts, apps etc? I accidentally restored my iphone last year and it was horrible trying to get everything back on it, I just don't really want to do that again! I'm thinking I could possibly back up to iCloud and then erase my current library and start from there, but I'm very paranoid about losing my contacts and my photos! Also I just visited the iCloud website and I couldn't figure out how to access my photos on there. Any help that anyone could offer would be awesome! Thank you!
https://discussions.apple.com/docs/DOC-3141
-
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
my iphone 4 conked out.It was not receiving cellular signal so I switched off and on.After switching on instead of taking me to the first page of apps it showed me ios6 tab and asked me to connect to itunes where it asked me to restore settings. which i did and waited for an hour and a half and later realised its got stuck. Now the phone does not respond at all and shows the logo and a half complete bar.Is there a solution to this, if at all. Am without a phone here ppl.Thanks
Did you do the update via iTunes?
If you are only getting the logo will want to try to see if can get device in recovery mode and try the restore process via iTunes again.
If you are still unable to get the device to restore will need a repair
Out of Warranty will cost
Just a heads up -
I tried to reset my settings in my iPhone 4 and now it won't restore my iPhone. I tried connecting it to iTunes and it won't work. How can I fix this?
Did you try to connect in recovery mode, explained in this article?
iOS: Recovery mode -
I restored my iphone and now it has gone back to factory settings. How do I transfer all the purachsed items from my itunes back onto the phone?
Hello whytea4
Check out the articles below and choose the one for your computer to sync media and apps to your iPhone.
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I restored my iPhone 3 g to its factory settings and I tryed to connect it to iTunes on my laptop and it said This iPhone cannot be used because the required software is not installed. Run the installer to remove iTunes. Then install iTunes again. HELP!! PLEASE!! Because I cannot get on my iPhone!!
Hi, Mommacat26.
Thank you for visiting Apple Support Communities.
This usually means that a required component is missing. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Removing and Reinstalling iTunes and other software components for Windows XP
http://support.apple.com/kb/ht1925
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
If the issue persists, try installing the Apple Mobile Device Support driver. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows XP or Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
i recently restored my iphone 4s and synced it back to my settings, but it no says no service or searching in the top left corner what do i do??
Call Verizon tech support.
-
Hi, I have tried to restore settings on my Iphone due to problems I was having with the phone cutting out when talking on the phone, now Iphone shows Sim Failure, how can I get back to using my phone? Please help, its a business phone.
Hi jclarke64,
Thank you for contributing to the Apple Support Communities.
I'm sorry to hear that your iPhone 4s was lost, and glad that you were able to upgrade.
If your iPhone 4s was backed up to iCloud or using iTunes, you can restore the backed up data to your new phone.
See the steps in this article for help with restoring from a backup:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
All the best,
Jeremy -
Will I lose all my settings if I have to restore my iPhone 4?
I was updating my phone via a computer then wifi crashed now my iPhone 4 is stuck with a picture of a cable pointing towards the iTunes symbol. I connected it back to my computer hoping it would start updating again but it tells me I have to restore my phone but it will go back to the factory settings.
iPhone User Guide (For iOS 4.2 and 4.3 Software)
-
If I restore my iPhone to factory settings, will I loose my texts?
If I restore my iPhone to factory settings, will I loose my texts?
OneLuckyWoman in order to avoid this please backup your iPhone in iTunes.
Follow the steps in this article to backup your iPhone in iTunes: http://support.apple.com/kb/HT1766
Once you've done that, you will need to restore from that backup which this article tells you how to do. And than your text messages will be restored as well. I hope this helps. If you have any questions please just let me know.
Maybe you are looking for
-
Help! Apple will not help me with a faulty power button
Hello, Approximately, 6 months ago, I took my iPhone 4 to an Apple store because I had dropped it. Completely smashed! I had to pay £180 and they gave me a new iPhone. Last week, the power button seemed to stop working. It doesnt click. It doesnt do
-
How to display CPU temp in taffybar?
I am using xmonad with taffybar. Recently I found out that I can find out the CPU temperature from taffybar like this: import System.Information.CPU2 cpuTemp = getCPUTemp ["cpu0"] However, I cannot find out a widget to display this quantity. Do someo
-
Smart form query...need urgently
how should I DISPLAY MY FOOTER WINDOW AFTER DISPLAYING ALL THE CONTENTS OF MAIN WINDOW(MAIN WINDOW IS HAVING TABLE)
-
Why should we not declare Class with protected modifier ?
Why should we not declare Class with protected modifier ?
-
Volume problem in IOS x Yosemite
Hi , I have problem in the volume when I download x Yosemite , the volume icon in keyboard not appear instead it take a way the window that Im open up . ( this happen when I click decrease volume , but when I click mute or increase volume nothing