Restore standard hierarchy

Hi
we have a situation where client going for  restructuring of standard hierarchy. 
After the restructuring in case the restructuring is not in the desired structure we need to get back to the old situation.
one thing we can do is to export the existing hierarchy and save it locally.  and the same can be imported to restore back to the old situation.
Now the issue is, in case client creates new cost center groups and assigns the same to some cost center and later if he wants to go back to the old hierarchy (which does not have this new groups) there will be inconsistency of data.
Is it possible to do the complete restoring back of the standard hierarchy including deleting the cost centers and the new groups.
Please advise
thanks
Haranadh

You can only re-arrange cost centers within the hierarchy. If new cost centers are created, they cannot be deleted from the hierarchy, unless you delete the cost center itself. Again, if you have posted transactions, be it plan or actual in the mean time, these cannot be deleted.

Similar Messages

  • Restore standard cost center hierarchy

    Hi All,
    A user modified the standard cost center hierarchy in productive system. Later I modified it in development system and transported this new version by a change request to productive system. I used the transaction OKE6 to include 'standard hierarchy', 'cost centers' and 'cost center groups' in the chnage request. When the change request was transported to productive system it deleted the modifications done by the user, it means some cost centers with cost allocations were deleted. We need to recover that version(the one with user modifications in productive system), do you know how can we do that?.
    Many thanks in advance.
    Miguel

    Dear Miguel,
    Please refer to the following note that offers alot of helpful advice to guide you with repairing Standard Hierarchy's:
    Note:  27416     Standard Hierarchy Repair
    In addition you might find 'K_REMOVE_DOUBLES_FROM_STD_HIER' helpful and further information can be found in the following Note:
    Note: 545453   Multiple existing groups in standard hierarchies
    I hope this helps you on the way and guides you towards a resolution of the issue.
    Kind Regards,
    Brendan

  • How batch append cost center group to standard hierarchy by batch

    Hi Guys,
    Would you please tell how me how append cost center groups to standard hierarchy by batch, every time I have to do it one by one, is there  a convenient way? thanks.
    Best Regards
    FS

    Hi,
    You can create any number of cost center groups as per your requirement.
    But one thing is crucial. If you crin your eate the groups using the T Code:OKEON. those will effect  to the standard hierarchy.
    Cost centers created wil KSH1 will not effect to standard Hierarchy.
    Main point here is the main hierarchy should be maintained in OKEON. Later you can add any number of groups to that. LSMW will work, before that Hirarchy Area(Cost center group) should be maintained in the system for effective work of LSMW.
    Regards,
    Pavan Kumar Arvapally

  • Transport cost center standard hierarchy & profit center herarchy

    Dear All,
    Pls guide how to transport cost center standard hierarchy, cost center groups, profit center hierarchy and profit center groups from config client to production?
    Regards
    Komal

    Hi,
    For CO data go to OKE6 transaction and create a change request.
    For PCA, go to 0KEQ and do the same.
    Regards,
    Eli

  • Bizarre Thing Word for Mac 2011 Restore Standard Fonts

    I don't know where to post this. I can't find a section for discussing Word for Mac 2011 even though a bazillion people probably use it. So I'm hoping someone who does will read this and give me some insight.
    I've been having a terrible time opening Word. The W just bounces around on the dock a few times and then settles down and it never opens. When I try to open a specific document through Finder, it's completely non-responsive. So I read on this forum that the issue could be checking your Font Book and possibly restoring standard fonts. So I thought I had nothing to lose (HAH!) and I went to Font Book and did the Font Validation test. I didn't have any serious errors but I thought what the heck and I clicked the box that said Restore Standard Fonts. Then I tried to open Word and it opened flawlessly. Yippee, or so I thought.
    Two days later I tried to open a Word document that is 433 pages long. Well guess what, now it's only 376 pages. I was completely freaking out. What could have happened? I scrolled through it and each page is there sequentially. I don't understand how this could have occurred. Could "Restore Standard Fonts" have done something to the spacing? Could it have removed certain letters?  I can't see anything missing, but how could I have lost 57 pages?
    Well luckily I had an old hardcopy of the document and was able to see that prior to this Restore Standard Font action, there were 24 double-spaced lines to a page and now there are 28. So I think that's the explanation, although I can't be completely sure, unless I review the entire document word for word.
    So can someone please explain why this happened? Why does Restore Standard Fonts add lines to a page? Are the letters smaller? Is my document okay? Or should I not have done what I did.

    macette1976 wrote:
    I don't know where to post this. I can't find a section for discussing Word for Mac 2011 even though a bazillion people probably use it.
    These forums are really for Apple products.   MS runs its own forums which focus entirely on its products, where you might want to also search/ask:
    http://answers.microsoft.com/en-us/mac/forum/macword

  • How to make changes to profit center standard hierarchy?

    Hello!
    I have to make changes in standard profit center hierarchy. Should I make the changes in IMG or Sap Easy access -screen? If I make changes in IMG, could you please tell me the right path where can I find it?
    Another question, if some profit center is in the wrong place in stardard hierarchy and I want to transfer it to another place (under other node for example), how is this done? Should I delete this profit center first (I tried delete but it wasn't possible..) or can I just transfer the profit center?
    Thanks!
    Points will be given!=)

    Hi,
    in the IMG you can maintain the profit center standard hierarchy via TA KCH4. The path is:
    -> Controlling
    -> Profit Center Accounting
       -> Master Data
        -> Maintain Standard Hierarchy
    The transport of the profit center standard hierarchy is done via TA 0KEQ,  (this is relevant for both KCH5N and KCH4).
    IMG Path:
    -> Controlling
    -> Profit Center Accounting
      -> Tools
       -> Transport Customizing Settings
    Hope I understood you correctly.
    Regards
    Karl

  • Cant change COST CENTER GROUPS and/or Standard Hierarchy

    Hello all,
    im facing some problems during change of COST CENTER GROUPS and/or Standard hierarchy.
    When im trying to select im getting following error Value maintenance not allowed ->Standard Hierarchy
    When i do get the selection of the cost center that i want to remove from the hierarchy im getting this error Function is not supported in the standard hierarchy.
    I dont know anymore what to do.
    ive searched in forum and google but still didnt find enything usefull.
    Regards
    Laurynas Prikockis

    Hello,
    There is no word called removal in SAP. It would have been properly pronounced if say "Delete".
    In case of delete, I do accept, there should not be any planned or actual line items during the fiscal year. If there are any actual or planned lines items you cannot delete the cost center during that period.
    However, you can still delete the cost center in the next fiscal year if there are no actual or planned line items.
    Hope this makes clear.
    Regards,
    Ravi

  • Best Practice on Moving Standard Hierarchy (Cost /Profit)  into production

    Hi,
    What is the best practice to move standard hierarchy into production? Is it better to move it as a transport? Or is it better to upload into production with LSMW?
    Thanks,
    Santoshi

    Hi,
    Best practices applied to all developments whether it is R/3, BI modelling or Reporting and as per the best practice we do development in Development system, testing in testing box and finally deploy successful development to production. yes for user analysis purpose, user can do adhoc analysis or in some scenario they create user specific custom queries (sometimes reffere as X-query created by super user).
    So it is always to do all yr developement in Development Box and then transport to Production after successful QA testing.
    Dev

  • Profit center Standard Hierarchy

    Hello Gurus
    I  Defined  the Profit center group in KCH1 but i can not able to Define the standard hierarchy in KCH4  when i was define the standard hierarchy  while system shows some message
    This function is not allowed in the standard hierarchy
    Message no. OH040
    can anybody give the Valuable inputs my issue my client year ending process is going on
    Regards
    venkat

    Hi,
    Via KCH1 you create alternative profit centre groups. If you want to define standard hierarchy, you have to create it in KCH4 (or 0KE5).
    Regards,
    Eli

  • Profit Center Standard Hierarchy  in Production Server

    Dear All
    I have done Controlling Area Settings for Profit Centers via TCode: 0KE5. I have made Profit Center Standard Hierarchy in Development server. The same Standard hierarchy is available in Quality sever but it is unavaliable in Production server.
    Please guide me.
    Thanks & Regards
    Kanwaljit

    Hi,
    You should check if the transport with the relevant configuration has passed to Produciton. Anyway, you can create new one via 0KEQ transaction.
    Regards,
    Eli

  • Urg: Need to replace standard hierarchy with alt hierarchy

    Hi,
    I have an urgent need to replace the cost center standard hierarchy with the Alternative hierarchy already available. I dont have Business organization implemented so I cannot use Keog3...I need to know if there is any other way..
    this is super urgent...please help...

    Hi i am a student could you please answer
    what is an alternate hierarchy and when do we use it
    Thanks

  • Re: Analysis period in standard hierarchy for profit center

    Hi All,
    I want to change analysis period "From" in the standard hierarchy in profit center group.When i go and changed the date in the set analysis period "valid from" and save it,the date has not get updated. Please tell me a way to change the date. Used T code KCH6N
    Thanks,
    Ama

    Hi either profit center or cost center, change the analysis period will not work if we do it in between the year. we have to change this at the end of the fiscal year  end. Then only it will allow you to save it..
    Thanks
    Fit 4 Nothing

  • Profit center has assigned in wrong standard hierarchy in sap

    Hi,
    PHE09 this is my profit center ,which is assigned in two differenr standard hierarchy so i want o remove a profit center wich is assigned wrongly in one standard hierarchy ,kindly advise me how to remove it
    Thanks in advance
    Chandrasekaran.R

    Hi Chandrasekaran,
    Can you provide details on where you are assigning the profit center?
    Thanks,
    Shalini

  • Standard hierarchy for cost centers, transactions okeon, okenn

    Hello,
    When I run transaction okenn (or okeon) I cannot see hierarchy for any cost center group. Exactly, option 'expand subtree' cannot be executed so I am not able to see all nodes of the specific cost center group. I can only see the name of the cost center group, or cost center itself, but not as expanded tree.
    What could be the problem? Do I have to define something additionally?
    Best regards,
    Dragan

    Hi,
    I don't really trust SU53...it's unreliable as it only shows you the last authorization object checked. Please verify via an authorization trace in ST01. If the issue is indeed PLOG please check SAP notes 177844, 211991 & 175063.
    Once you have gone through the notes please run the hierarchy master data comparison (OKEON-> Menu -> Extras).
    The issue regarding PLOG and the standard hierarchy is well known in support, but I haven't seen it around in a while....
    Regards
    Karl
    Edited by: Karl Helm on Mar 24, 2009 5:38 PM

  • Change the standard hierarchy

    Hi, I want to know the effects that I could have if I change the standard hierarchy of my Cost Center Group.

    Elsa,
    You could change your standard hierarchy but after you will have problem with your analyses.
    you will not be able to compare yours data. The reports are based one the Standard hierarchy.
    But if your can explain the differences to your company ....
    Regards
    Valérie
    Message was edited by: valerie secondy

Maybe you are looking for

  • How can we diferentiate the follow scenario

    hi friends can any one give me the solluation for the following scensrio Our client sells industrial salt (material) in the following three ways 1, the client produce the material and sell it to the customer 2, the client buy it form vendor and store

  • Using OneStep DVD with a HDD Camera

    I am a relatively new mac user (4 months) but i've navigated my way around pretty well and have used all the ilife software as well as final cut express and some other things with much delight. But I have a wife and have a 1 year old baby. The wife i

  • What are the acceptable Sap methods/steps to change standard SAP/Abap code?

    To you Sap experts: Can you point me to Sap document  that lists the acceptable methods to follow when modifing SAP standard  (abap code).  We are on release 4..7.   I assume there is a best practice guide if you have to modify standard Sap code of w

  • Where are adobe reader log files?

    Where are the log files for Adobe Reader? When one of our clients opens a form off our liquid office server we receive an error.  If possible I would like to find a log file that might give some sort of clue as to why this is happening.  Thanks

  • My RSL's won't be cached

    My RSL's are loaded everytime I enter my site (.swz and .swf). It is an HTTPS site, and I heard this will cause errors in combination with the use of RSL's. Is that right? If so, is there an solution? Or is it that something else can be the cause? Bt