Restore standard organizational model in CRM
Just out of interest: if I were to convert the organizational model in CRM into an enhanced one, is there any possibility to later restore the standard organizational model, for instance via a backup?
Just out of interest: if I were to convert the organizational model in CRM into an enhanced one, is there any possibility to later restore the standard organizational model, for instance via a backup?
Similar Messages
-
Issues with Organizational Model in CRM
Hi guys,
We are implementing CRM 5.0 and I generated Organizational Model in system using Report: CRM_ORGMAN_R3_ORGDATA_GENERATE. This report generated organizational model with no errors. But there is a issue with org model:
In our R/3 system same sales office are assigned to multiple sales area and same salesgroups are assigned to multiple sales office due to this in CRM when the org model generated it only assigned the sales office and sales group to sales org 1000 however sales org 2000 and 3000 left unassigned.
eg:
R/3:
Sales office assigned to
sales area: 1000 10 10
001
002
003
2000 10 10
001
002
003
And after generation in CRM:
Sales org: 1000
sales office: 001
002
003
Sales org: 2000
no sales office or sales org assigned.
When I am trying to create it manually then it gives me an error: "attribute_R/3_SA_ORG with value xyx already assigned".
Did anybody faced similar issue?
I even ran the report for to change the org model to enhanced version but it didnt helped.
Please give your suggestions.
Thanks
AnkitHi Ankit,
Its common that the sales office are only assigned to the first sales organiz unit in
CRM structure in PPOMA_CRM. The same for the sales groups that are only assigned under the first sales office unit in CRM structure in PPOMA_CRM.
No mather, the important thing is that under Function tab > Sales office tab, for a sales office, the system has all the possible combinations for R/3 sales org, R/3distribution channel and R/3 division.
And the same under Function tab > Sales group tab, for a sales group, that must contain the possible combinations for R/3 sales org, R/3 sales office, R/3distribution channel and R/3 division.
In this way, you have the structure like:
SALESORG1001
SALESOFFICE 1100
SALESGROUP 100
SALESOFFICE 1200
SALESOFFICE 1300
SALESORG1002
SALESORG1003
But inside SALESOFFICE 1100 details you have something like:
Sales office tab:
R3 sales org | R3 DC | R3 Div
1001 10 01
1002 10 01
1003 10 01
And under Sales Group 100 you have something like:
Sales group tab:
R3 sales org | R3 Sales Office | R3 DC | R3 Div
1001 1100 10 01
1002 1100 10 01
1003 1100 10 01
1001 1200 10 01
1002 1200 10 01
1003 1200 10 01
1001 1300 10 01
1002 1300 10 01
1003 1300 10 01
Hope it helps,
Susana Messias -
CRM - HR - SD Organizational Model
We are integrate CRM and HR in part of the organization management.
Organizations and persons transfer from HR to CRM periodically via IDOCs. Ok.
We use persons in the activities.
Now in the business activities we want determine the organizations as Responsible Organizational Unit (Sales) and Sales Office.
But, I dont know how I can implement both HR and SD-organization model in CRM???Denis
i think there would be only one organizational data store in CRM. You can opt to bring either the Sales Organization structures or the HR structures into CRM, but they will be stored in one source only. Then you can build your rules around this data to determine during the business transactions.
As Brad pointed out, normally the structures are borrowed from SD side of R/3 as who knows better about the sales orgaizations/sales distribution channels/sales divisions/sales offices/sales groups etc than the SD in R/3. HR's primary controlling functions are about the positions, roles and idnetification of employees. This data is replicated into CRM as BP in the roles of employees.
So the best practice is sales structures from SD and employees from HR.
reward if you like. -
Customer name is not updating in Organization model
Hi All,
One employee is created with the name "test customer" in ECC and it is assigned to organization model in CRM. After that the the employee name is changed fom test customer to __customer test. Now same changes is updating in CRM but not updating in Organization model?
can you plz tell me why the employee is not updating in Organization model?
Edited by: prajesh24 on Jun 16, 2011 11:08 AM
Edited by: prajesh24 on Jun 16, 2011 11:32 AMHi
The changes to the business partner data flows through the middleware in run time.
But if you assigned the user with some initial name as XYZ. Then change the name of the business partner to X1Y1Z1, then you need to remove the earlier entry in the name of XYZ and assign the new entry X1Y1Z1 manually.
As a standard, it will not update the name in the organisational data in CRM.
Hope this will be helpful.
Regards -
Can TDMS transfer ORG Model in CRM
Hi,
We are planning on using TDMS to refresh CRM Organizational model from CRM PRD system to the QA system. Didn't find document about whether this can be done or not. Since Org model is part of master data and TDMS can transfer master data, assume it'll work.
Has anyone done this and can confirm? Thanks for your help in advance!
-SerineHi Serine,
Yes, TDMS for CRM transfers the complete org model as it is part of master data.. But reduction cant be achieved based on Org Model...
TDMS for CRM has two package types similar to TDMS for ERP..
1) Master & Configuration Data
2) Master & Configuration Data along with time sliced transactional Data
Regards,
Suman -
Update organizational model from ERP
Hi experts!
I have a requirement for which the organizational model in CRM needs to be updated according to the updated one in ERP.
Is there an automatic delta update?
I am a newbie in CRM so any documentation concerning the Organizational Model Customizing would be very helpful.
Thank you all in advance!!Hi Grigoria.
CRM only allows one first download of SD structure from R/3/ECC into CRM. Any changes in the organizational model on R/3 side (new sales office, new sales group, new combination allowed of distribution channel, division, etc) needs to be done manually on CRM side.
This is being in this way since first CRM releases and doesn't seems that SAP is going to create any new procedure to change this. I guess it's tecnically difficult because of these information on CRM side is as master data records.
Regards,
Susana Messias -
B2B. Enhanced version of the CRM organizational model
Hi,
We use B2B with sales order. We works with standard org. structure.
Enhanced version of the CRM organizational model.
http://help.sap.com/saphelp_sm40/helpdata/en/32/4473211b7778428efebc865e351cb4/content.htm
Does B2B works fine with Enhanced version of the CRM organizational model?
DenisHi,
Enhaced backend integration - Org model is used when there is more than one "org" attribute is assigned to higher org node , e.g. two sales offices assigned to one sales org.
In Product catalog configuration , in Catalog Variant, we can make entry for Sales org , Distribution channel & division,
so in this case , i feel there should not be problem in B2B scenario even if we use enhanced backend integration model.
hope it helps,
regards,
Prashant -
Organization Model download from R/3 to CRM
Hi Guys
We are maintaining the complex Organization model in R/3 system and we need to Download the complete organization Model from R/3 to CRM and its relevant Organization structures too. I could not found a way what is the download object to be used to download the Organization model from R/3 to CRM .
will the Transaction CRMC_R3_ORG_STRUCTURE download the Organization model also , and what is the prerequisites for this organization model download
Thanks in advance
Warm regards
RajasekharDear Jayesh
1) Do the ALE specific settings like creating Logical systems , Rfc destination,
Distribution Model .
2) Specify the filters in the distribution model as per the note 312090, 550055
3) below link will be usefull to u
/people/vikash.krishna/blog/2006/10/15/replicating-hr-master-data-part-1
Warm regards
Rajasekhar -
Enhanced backend integration version of the CRM organizational model
Hi,
I want switch from Enhanced org Model to Standard Org Model While doing client copy in EHP 1
Existing client is with Enhanced Org Model.
Any Suggestions?Hi,
As per SAP , if you are already using enhanced backend integration model , you can " NOT" return to the standard backend integration version,
http://help.sap.com/saphelp_sm40/helpdata/en/15/fbbb3ee5bf7173e10000000a114084/content.htm
Hope it helps,
regards,
PRASHANT -
Number range of BP in the Organizational Model
Hi
I created in the transaction PPOCA_CRM my Org.Model when i save de data the system assign a number of BP to the unit, but i have two different Number Range; one to create BP's type 3 that is internal range and the second one i want to use for de Organizational Model but when i save de data the system assign the first one. (Note that the second one is internal too)
Do you know any transaction where i could configure what number range the system have to take when i create the Organizational Model??
Thanks in advanced
:PHi Susana,
Unfortunately there is no unique transaction that allows the system to distinguish between CRM Organizational Unit and Business Partner assignments. Transaction BUCF is the transaction that you would go to create the number range assignments to busines partners. Whatever range you designate as the Internal Standard Grouping will be used to assign Org Unit BP Numbers as well as other business partners that utilize internal number assignment. What happens is that once you designate an internal standard group assignment in CRM that number range will be used for all assignments whether that is for Business Partners, Org Units, etc. You do not have the option to create multiple Internal Standard Group references.
If you have a requirement to assign a unique number range to an Organizational Unit different than the business partners you create, some development will be necessary. I'm not sure how complex this will be, but I can imagine it won't be easy as you are restricted to only one internal standard grouping. Hope this helps.
Gil -
Business Partner in Organizational Model Missing
Hi
I have added an Org Unit in Development Server and the ID and BP number is generated.
I have Transported from Dev to Quality server by using RHMOVE50 to move the org unit.
The Org unit and ID are transported successfully but the BP number is missing.
Note: Earlier for all other Org Units in Qulaity the BP Number exist.
Please prove me solution and points will be rewared.
Thanks and Regards
MasthanHi,
Apart from the above steps given by others you can also follow these steps as they did work in my scenario, this generally take some hours for the system to generate the BP ids so its better to schedule these activities in the evening so that when the Ids would be visible the next day I dont know whether this is a standard but this did happen in my case as i had to create the org structure twice so i had this experience twice.
Scenario when the buffering is not done and the Business partner id is not getting created in ppoma_crm
Check Settings for Attribute Maintenance
Check the consistency of the attribute assignments to the organizational units.
1. Access the activity using the following navigation options:
Transaction code SPRO
SAP CRM IMG menu Customer Relationship Management  Master Data  Organizational Management  Organizational Model  Tools  Check Settings for Attribute Maintenance
2. Execute the check.
Organizational Data Settings Check
See documentation of the IMG activity for details about this check
1. Access the activity using the following navigation options:
Transaction code SPRO
SAP CRM IMG menu Customer Relationship Management  Master Data  Organizational Management  Organizational Model  Tools  Organizational Data Settings Check
2. Execute the check.
Setup Buffering for Sales Scenario
Report HRBCI_ATTRIBUTES_BUFFER_UPDATE is used to buffer the attributes of organizational management objects. To enable buffering you have to maintain view T77OMATTR.
Enable Buffering for Sales Scenario
1. Access the activity using the following navigation option:
Transaction code OOATTRCUST
2. Select the structure node Scenarios.
3. Check the checkbox in the column Buffering for the scenario SALE.
4. Choose Save.
Update Buffers for Sales Scenario
1. Access the activity using the following navigation option:
Transaction code SA38
2. Call transaction SA38.
3. Select the report HRBCI_ATTRIBUTES_BUFFER_UPDATE
4. Select the checkboxes for Delete All Buffers and Restructure buffer on Date.
5. Choose Execute (F8).
In note 737315 further details regarding this topic are described. Note you can also schedule a job in transaction SM36 to run this report regularly.
Hope this helps.
Regards,
Amit -
Tables which stores org model in CRM
Hi All,
Which tables stores the org model or the sales area in CRM.
KRKHi there,
The tables that stores the organization model main information are HRP1000 and HRP1001.
For working with information that relates the org.model with sales area, I normally use static methods of class CL_CRM_ORGMAN_SERVICES.
Check if this class may help you a little more in your needs.
Kind regards,
Garcia -
How to transport organization model
Hi Experts...
how to transport organization model from development server to testing server in CRM FUNCTIONAL MODULE.
Thnx..Hi ,
Refer to this thread:
[Transport of Organization Structure;
Cheers, Satish -
User is not integrated in organizational model
Hi!
We are in SRM 5.0 Server 550. We have created our own roles based on the standard roles. Our employee role is almost identical to SAP_EC_BBP_EMPLOYEE. We have added some transactions.
Users_gen worked fine for the users, their attributes are maintained in BBPOMA_BBP and the check tab shows green light. But when user logs on and tries to maintain its settings we receive the message "User is not integrated in organizational model"
We also receive an error while trying to create a SC. I think this is related to the problem above.
Have we missed a crucial transaction?
I can see we are missing the authorization object PLOG.
Sincerely
Anders
Edited by: Anders Öhrling on Nov 5, 2008 10:56 AMHi!
The problem stared when I was trying out the new role that this user has gotten. BBPSC02 didn¨t work. By a chance I looked at the settings and saw that "User is not integrated in organizational model" was stated at the top. One could also see that no attributes at all was maintained here. So it looks like there is a correlation between BBPSC02 dump and that the user is not integrated in the organizational model.
Sincerely
Anders -
Hello,
at the beginning of CRM in our company we created an organizational model. There we have a hierarchy with sales organisation --> sales buro --> sales group.
Now we have a new office in another country. For the new office we have to create a new sales organisation, four new sales buro and four new sales group.
I find the posibility to create these in SPRO --> SAP Reference IMG --> CRM --> Master Data --> Organizational Management --> Organizational Model --> Change Organizational Model.
If I create a new instance here it gets the next available ID.
In the PCUI fields these instances are sorted of the ID. Is there any possibility to achieve that the new sales organisation appears between the existing sales organisations?
Thanks for your help!
Regards
PhilippHi,
whatever the orgn you have created select that and under that create this orgn.
I hope this works
Regards,
Madhuri
Maybe you are looking for
-
That's basically it I have the right info, but it just says "Unknown Error" I can sign into the apple website alright, just not the store
-
How to restrict a VPN user with a specific anyconnect profile?
I need to assign to anyconnect users different profiles. This is done easily with IPSec, with the group policy configured in the client. With anyconnect I have two options: - Allow the user to select the connect profile: The problem here is the user
-
Hi! I'm using JDev 10.1.3+ADF+Struts I have some attributes in viewObject, and have related bindings in PageDef. I whant to set init values for that attributes in 2 cases: 1. Edit Form doesn't contain fields for entring attribute value. For example:
-
I have audiobooks (they are audio cd format) one book is about 7-10 CDs. How to import to itunes or ipod that all files would go in order if default file names are used(like track 01...) itunes resets file count for each cd.
-
One Touch Recovery Software for XP for G550 94Q model
Please post the driver link for One touch recovery software link for G550 94Q model. I found drivers for Vista but not for XP...