Restore steps please check

Hello All,
I am very new to DB2 and have to do a Restore, Have designed the below steps with information from here and there, whatever I have stuidied in 2 days, please check if it is correct.
Please let me know if any step is missing and if the I execute the below steps will Restore work successfuly.
Please Review.
1.     Check the Validity of the Backup to check if it can be Restored
  db2ckbkp -d
.\tape0
  Upon completion we should get something like u201CImage Verification Complete -   successful.u201D
2.     Initialize Tape is needed on windows before a Restore
  Initialize tape on
.\tape0
3.     Check the Backup details like Timestamp etc,
  DB2 LIST BACKUP ALL FOR PRD
4.     Go for a Restore
DB2 RESTORE DATABASE PRD FROM "<Location of Backup>" TAKEN AT <Timestamp> TO "<DB Drive in DR SERVER>" INTO <New Database Name> WITH 2 BUFFERS BUFFER 1024 PARALLELISM 1 WITHOUT PROMPTING
5.     Now go for Roll Forward:
  db2 u201Crollforward db prd query statusu201D
This command will lists the log files that the database manager has rolled forwarded already. When we do a roll forward, it will rollforward from the next one.
db2 u201Crollforward db prd to end of logsu201D
db2 u201Crollforward db prd completeu201D
6.     Start and Activate the Database
db2start
  db2 activate db prd
7.     Check the list of Active Databases
db2 list active databases

Hi,
Please refer this useful guide " [A Practical Guide to Backup and Recovery of IBM DB2 for Linux, UNIX and Windows in SAP Environments|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80e61772-e471-2c10-60b1-9529b69b50c5?quicklink=index&overridelayout=true]" to get more information.
Regards,
Bhavik G. Shroff

Similar Messages

  • Iphone 3gs shows activation required, hocked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?

    iphone 3gs shows activation required, hooked up to iTunes and it is not recognized. Did the restore but just gets to the end and gives an error message it could not be restored, an unknown error occurred (-1). Can someone assist me in next steps please?

    Instructions to get the phone back working temporary.. till there is a real fix.
    1. turn off the phone
    2. fire up iTunes
    3. press and hold the home button, plug in the cable, hold till you get to see the recovery mode
    4. iTunes will the allow to choose restore the phone back to 5.0.1 ( no other choice)
    5. iTunes will then ask you to choose which previous backup to would like to recover.
    (note: please do not reboot your phone unless necessary, i realize at times after reboot, it goes back to sq1)

  • Today I restore my phone, before I restored it I checked that my photos are saved on my icould, I did the backup and everything was back on my phone but not my photos! :( please help I need my photos back :|

    today I restore my phone, before I restored it I checked that my photos are saved on my icould, I did the backup and everything was back on my phone but not my photos! please help I need my photos back :|

    Hello purpleroses68
    To download any photos that were on your My Photos Stream, then you will need to have Photo Streamed turned on within your computer. Keep in mind that My Photos Stream only holds the last 30 days of photos and those will be the only one that will download. Check out the articles below for more information for the process and general information about getting your photos downloaded.
    Archive or make copies of your iCloud data
    http://support.apple.com/kb/ht4910
    iCloud: My Photo Stream FAQ
    http://support.apple.com/kb/ht4486
    Regards,
    -Norm G.

  • Error: could not sign in please check your network connections facetime on macbook after lion update 10.8.4

    Upgraded from Lion 10.7.4 to 10.8.4 and now I get these errors on Facetime and Messages - anyone know the fix?
    network is fine -
    apple id and password are correct -
    added 8.8.8.8 and 8.8.8.4 to DNS -

    This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
    Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
    Step 1
    Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
    Step 2
    Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
    Step 3
    From the menu bar, select
     ▹ About This Mac
    Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or obviously invalid, take the machine to an Apple Store or other authorized service center to have the problem corrected.
    Step 4
    Back up all data, then take the steps suggested in this support article.
    There are five steps in that article. Please take all of them. If you don't understand some of the steps or can't carry them out, ask for guidance.
    Step 5
    From the menu bar, select
     ▹ System Preferences ▹ Network
    If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
    Step 6
    Reset the NVRAM.
    Step 7
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    If iMessage worked in the guest account, stop here and post your results.
    Step 8
    According to one anecdotal report, Flash Player may interfere with iMessage, though I don't know how and can't confirm. To test this theory, select from the menu bar
     ▹ System Preferences… ▹ Flash Player ▹ Storage
    and click
    Block all sites from storing information on this computer
    Close the preference pane. If this action solves the problem, please post your results.
    Step 9
    Reinstall OS X.
    Step 10
    If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

  • MOZCRT19.dll is not valid windows image. please check against your installation disktte

    MOZCRT19.dll is not valid windows image. please check against your installation disktte. Please help me in this.
    == This happened ==
    Every time Firefox opened
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)

    This is because mozcrt19.dll file is missing or corrupted. You can replace the corrupted file by following these steps.
    Step 1. You can download mozcrt19.dll here:
    <del>http://dllcentral<i></i>.com/mozcrt19<i></i>.dll/8<i></i>.00<i></i>.0000/</del>
    Step 2. Now navigate the following path:
    C:/ Program Files / Mozilla Firefox
    Note: C: Drive is the drive where windows is installed.
    Step 3. Now restore mozcrt19.dll file in “Mozilla Firefox” folder.
    Step 4. Restart your Mozilla Firefox browser. It will work fine.
    <i><do not download Firefox components from third party sites, but reinstall the current Firefox version - edited by moderator></i>

  • When I try to use FaceTime on my Macbook Air, I try to verify the email I want people to call me with, and it says verified, but soon an message comes up that says "Could not verify the email address. Please check your network connection and try again."

    So our school lets us use Macbook Airs for the school year, and it has facetime on it. I know facetime isn't blocked because like everyone else is using it. So I decide to give it a try. I click the icon, it says enter your apple ID. I dont have one, so I click to make one, and do so. I then enter my apple ID and click next. The screen reads "People will call you using your email address. What email address would you like to use?" I enter my email address in the box below the message, and then go to my email and click the link, and sign in, thus verifying the email. I go back to the facetime window, and click next. At the top it says Verified, but when I click next it doesn't go on to the next step, it simply blacks out the next button so that I can not click it, and after a few minutes a message comes up that says "Could not verify the email address. Please check your network connection and try again."
    So that is the issue, please help!!!!!
    *Note-I repeat that I know it is not blocked by the school because everyone else uses it just fine.*

    Hello BassoonPlayer,
    Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using.  FaceTime will not work if you do not have the proper time zone set up for the location that you are in.  This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly.  By the way, you described your problem very well, which makes it easier for us to help you.  Hope this solves your problem -- if not, post back and I can suggest other remedies.
    Wuz

  • While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

    Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
    == Today ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

    Hi,
    I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
    "An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
    I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
    Thanks in advance.
    Poomani Sankaran

    Hi Poomani,
    Thanks for posting your issue,
    you must have to Install SQL Server 2012 ADOMD.Net  on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
    http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Cross Company Stock Transfer- Please check excise base for the item is zero

    Hi,
    My scenario is Cross company Stock transfer (Two different Company Codes)
    I have done following steps :
    1.Create Purchase Order
    2.Create Outbound Delivery for Purchase Order
    3.Post Goods Issue for Delivery
    4.Creating Billing Document
    5.Creating Excise Invoice
    6.Printing of Excise Invoice
    7.Post Goods Receipt for Stock Transport Order
    Till MIGO there is no problem.
    I am getting a errro while doing MIGO with reference to Outbound Delivery, when I enter Excise Invoice created in sending plant, I am getting error as
    "Please check excise base for the item is zero" - Message no. 4F121
    Excise Duty values are flowing as per the excise invoice but system make base value as 0 , I have maintained Assesable value in J1ID also. We are using TAXINN.
    Pl. help
    Thanks
    Vikas

    Hi
    The best way to slolve this problem, Now is to maintain Assable value in Material Master For reciving Plant.
    Hear you can maintain all the chapter id, register A or C, etc
    and then try doing GR,
    The other way and the permanent solution is
    VPRS or equivalent
    Condition class B Prices
    Calculat.type C Quantity
    Condit.category  H
    Cond.control H Condition value fixed
    Condit.origin A Automatic pricing
    In this Condition category is most important and by this only system copies the base amount for excise duty calculation in MIGO or J1IEX.
    Regs
    Niti Narayan

  • Trying to Hot Sync Visor Pro with Windows 7 (64 bit OS) - getting error: "The connection between your handheld computer and the destktop could not be establishe​d. Please check your setup and try again."

    Hi.
    I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
    I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
    Steps I have taken:
    * installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
    * The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established.  Please check your setup and try again."
    Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
    I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?). 
    Then how about the Infrared option?  I see on the PDA it has a red area that one can "beam" info.  Is this the same as Infrared or my 2nd option?
    I love my Visor and want to continue using it, but need to backup the valuable info!
    Any help with this would be greatly appreciated!
    THANKS!!!!!
    Post relates to: Visor Pro

    Hello lwalbring and welcome to the Palm forums.
    Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option.  Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
    Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico.  This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2.  Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2.  The software is free and the link is all the way at the bottom of the screen.
    Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter.  Some laptops still have IR ports and most desktops don't.
    Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
    Alan G

  • You cannot be signed in at this time please check ...

    Hi friends, i am using Walton Primo X1 phone. It has problem in skype. I downloaded the skype app and installed in my android 4.1.2 phone `. When i enter into skype and giving my login details its showing error that You cannot be signed in at this time please check your mobile network settings. But in my mobile, the network is perfectly alright. It doesn't has any problem. The internet is working properly in browser & in some other apps. I tried many options which are all gave in forums. But stil it has the same problem. Coudn't login into skype. Please give some ideas that would be perfectly suitabale for get rid from it. The mentioned methods which was used by me for solve problems. but it doesn't work.
    Note: I am using Robi Live
    1. Went to SETTINGS, APPS, SKYPE, CLEAR DATA, FORCE STOP, REBOOT THE PHONE. (Not work)
    2. Uninstalled and Reinstalled skype (Not work)
    3. Tried in WIFI (Not Work)
    4. Changed mobile network from Robi live to Robi GPRS (Not work)
    Please help me...
    Regards
    Bappa Nandi
    Khulna,Bangladesh

    Hi! We tested the issue on HTC ONE M8 device and couldn’t reproduce the issue ourselves. Did you experience the issue while you logged in the first time after installing Skype on your device? Could you please give more details about this issue – exact steps how to reproduce that, Skype version number, exact OS version, network type? You can find more details about specifics we need to know from here: http://community.skype.com/t5/Android/How-to-create-a-good-Android-issue-report/td-p/211384.

  • "USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

    Hi,
    I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past.  Thank you board members! 
    Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago.  There have been no changes (I know of) to the configuration, but now I receive  "The connection between your device and the desktop could not be established.  Please check your setup and try again."  On the laptop I sometimes get  "USB device not recognized."  I am unclear why I get the PC message sometimes and not others.   
    I have tried the following: (not necc exactly in this order)
    Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
    Reset the Palm (multiple times)
    Rebooted the laptop  (multiple times before and after the Palm resets)
    Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
    and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409) 
    Followed the steps in "Start Here" found at  http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057 
    Moved Backup directory as per a post on this forum
    Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
    Followed the steps in HotSync troubleshooter guide you can run through located on
    http://kb.palm.com
    Went into Device Manager - found it shows no yellow ! 's
    Followed Device Mgr Troubleshooter - went all the way thru with no solution 
    Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue.    ...? 
    Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
    Read all the posts under "USB device not recognized." 
    OK, I'm at a loss, can anyone help me?  Many thanks in advance! 
    ~Bob
    Post relates to: Tungsten E2

    Hello!
    Using a cradle with the Tungsten E2?  Tried bypassing the cradle and just use the hotsync cable?  Tried a different computer yet?  Somehow, the PC is having problems getting a signal from the device.  I assume you have the laptop charger plugged into the laptop during this?  Not going through a docking station or port-replicator.
    One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop.  This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time.  Keep me posted.
    Post relates to: Treo 650 (Unlocked GSM)

  • Could not read from the source. Please check if it has moved or been deleted

    hi all,
    when i try to render a afx project from media encoder i get the following message
    "Could not read from the source. Please check if it has moved or been deleted"
    i've read on the forum that this is due to an old installation of Premiere.
    I'm using a brand new computer. the only software installed is my cs5 master collection and the updates from adobe website.
    win7 pro
    i7
    16 gig ram
    cheers
    s

    Hello, this is terrible problem, which i found in CS 6 softwares ...
    solution i found only working, is uninstall and reinstall full package.. but it is not all,
    you need to do BRAND NEW admin account in windows, and install it there.
    that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
    1.by reinstalling of software, client WASTE HIS TIME
    2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
    I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual  "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..  
       I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
    Steps to reproduce bug:
    1. i export anything by button "queue" from premiere to Encoder
    2. Encoder will start encoding
    3. Encoder does not show the window of media encoding (down left )
    Results: sound of sheep occur,
    in encoding error file is this reason of canceling the encoding :
    01/02/2014 10:10:48 AM : Encoding Failed
    Could not read from the source. Please check if it has moved or been deleted.
    History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
    1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) . 
    I continued my work on my normal working windows profile . (profile A)
    Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
    2. suddenly it stop working (without knowing any possible reason - i did not do installations )
    and showed in error export log file :
    "Could not read from the source. Please check if it has moved or been deleted."
    3.repair via procedure(procedure "a"):
    i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
    I did these steps :
    a-uninstall master coll suite
    b-i used Adobe cleaner tool (remove ALL)
    c-removed raw directories in locations
    •C:\Program Files\Adobe
    •C:\Program Files(x86)\Adobe
    •C:\Program Files\Common Files\Adobe
    •C:\Program Files(x86)\Common Files\Adobe
    •C:\ProgramData\Adobe
    d-removed these links from registry file
    •HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
    •HKEY_CURRENT_USER\Software\Adobe
    •HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
    •HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
    e-restarted the PC
    f- newly installed the Master Coll CS6
    g-update the software
    result of repair of "3" : problem still exists
    4.Ok i find out after coordination with support, it should have been created  ANOTHER NEW admin account.
    4a:so i did the same procedure (uninstalling) in profile B
    4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
    4c: restarted the pc (and did not updated it yet)
    result :
    ==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
    ==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
    ==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
    (in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
    problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
    this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
    what i expect :
    to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
    what i do NOT expect from Adobe:
    to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

  • There was a problem connecting to the server...please check the share name..every 3 seconds.  made computer useless

    there was a problem connecting to the server...please check the share name..every 3 seconds.  made computer useless. Lion.  It only complains about one of my PCs that usually shares OK with the imac.

    First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
    From the menu bar, select
     ▹ System Preferences ▹ Network
    Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
    Try again to back up.
    If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

  • There was a problem connecting to the server "Time Capsule".  The share does not exist on the server. Please check the share name, and then try again.

    The following error pop's up as an [OK] dialogue box after logging in the iMac,
    There was a problem connecting to the server "Time Capsule".
    The share does not exist on the server. Please check the share name, and then try again."
    As it happens, a connection to the Time Capsule is established usually, anyway. On occasion it doesn't.
    I have a Volume, Data, on the capsule, which similarly, usually mounts, but occassionally doesn't, with access permissions denied.
    Any suggestions on how begin to work out how to achieve networking seamlesness?

    First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
    From the menu bar, select
     ▹ System Preferences ▹ Network
    Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
    Try again to back up.
    If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

Maybe you are looking for