Restore System from Q: Lenovo_Recovery Drive

Hello Everyone!
If you've installed another operating system over Windows 7 and want the stock configuration back, its possible to recover the system using the contents of the Q: lenovo_Recovery Drive, another computer, a Windows 7 installation disk and an external HDD case if that other computer is a laptop.
Remove and connect the Hard Drive to the other computer. You may at this point wish to enable viewing of hidden and protected system files and folders in the control panel at this point.
Go into Disk Management and delete all partitions on the Hard Drive except for the Q: Lenovo_Recovery drive.
Create new S: SYSTEM_DRV and Windows7_OS drives according to specs in Q:\FactoryRecovery\RECOVERY.INI remembering to mark the S: SYSTEM_DRV as Active.
Open and Copy the files in cdrivebackup.wim and sdrivebackup.wim using 7-zip or another program into the respective partitions.
Disconnect and insert the Hard Drive into your computer.
Boot into the Windows 7 installation disk using the F12 boot menu and choose a language.
Press repair in the bottom left corner of the dialogue box and follow the prompts.
Voila! Your system has been restored! You can now boot into the Hard Drive and configure windows for first use.

Hi,
I've followed your instructions and they work amazingly. I can't thank you enough. I tried multiple other fixes, if only this was at the top of google for Lenovo F11 not working or fix lenovo recovery.
Many thanks for this.
Regards
Sean

Similar Messages

Upgrade MacBook Hard Drive - Restore System from Time Machine Backup?

I have a MacBook that I want to upgrade the hard drive of. Am I right in thinking, all I need to do is:
Run Time Machine one last time, to make a recent backup of the MacBook
Install the new hard drive in the MacBook
Insert the Snow Leopard DVD, and start a clean installation
During installation, select the option to Restore System From Backup...
Will this copy across ALL of the contents of the old MacBook's hard drive, to the new MacBook's hard drive? A perfect clone? Because that's what I want to do.

I performed the installation, restoring a Time Machine backup from the external hard drive to the new blank internal one I put inside the MacBook. Everything went fine, except for one problem.
Now, whenever I try to open Safari, it immediately crashes with the error message:
"Safari quit unexpectedly
Exception Type: EXC_BAD_ACCESS (SIGSEGV)"
What's going on? How can I stop Safari from doing this? I've repaired permissions using Disk Utility, and Spotlight has finished re-indexing everything.

OS 10.6 - Please help - problem restoring system from time machine!

Hi there,
Today I installed a little program to convert flac audio files to mp3. When I ran the program the computer froze, so I rebooted but then I could move the cursor but not click on any menus or icons on the desktop, they just wouldnt respond - so basically I couldnt use the computer. After re-booting a few times with the same result I decided to reinstall the system using time machine from an external hard drive. I reinstalled OSX, then reinstalled Snow Leopard, then reinstalled the system from a previous save from Time Machine. It said the installation was successful, but when the computer restarted a message comes up saying "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again". Ive done this about 5 times now but it always just says the same message without starting properly. WHAT DO I DO???? I really need to use my computer tomorrow so any help is hugely appreciated!!! TIA
PS. i have done a hardware test in "loop mode" and it says everything is fine

HiDef Jules wrote:
Hi there,
Today I installed a little program to convert flac audio files to mp3. When I ran the program the computer froze, so I rebooted but then I could move the cursor but not click on any menus or icons on the desktop, they just wouldnt respond - so basically I couldnt use the computer. After re-booting a few times with the same result I decided to reinstall the system using time machine from an external hard drive. I reinstalled OSX, then reinstalled Snow Leopard, then reinstalled the system from a previous save from Time Machine.
how exactly did you reinstall the system from TM? please give details. the correct way to do it is to boot from the snow leopard DVD and use the "restore system from backup" utility in the Utilities menu. there is no need to reinstall anything prior to using that utility. the restore utility wipes your hard drive and restores it to the state it was in at the backup time.
It said the installation was successful, but when the computer restarted a message comes up saying "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again". Ive done this about 5 times now but it always just says the same message without starting properly. WHAT DO I DO???? I really need to use my computer tomorrow so any help is hugely appreciated!!! TIA
PS. i have done a hardware test in "loop mode" and it says everything is fine

Can't find Restore System from Backup In utilities

Ok I messed up my os and I need to do a restore system from back up I can't seem to find the restore system from back option in my utilities when i am running the installer with the os installer disk and when i have my external hooked up it just wants me to install in to that thing I don't know what that would do. I have read the article about restoring the entire system and that what I need to do but I can 't because my messed up os wont let me restart/shutdown with out pushing the power button I am tempted to just erase and install but I don't even know how restore with my time machine and plus i am scared to do it
any help would be most welcome i have been trying to fix this for about month now

I almost understand what you wrote, but it's so confusingly written I'm not sure how to reply. So give this a try:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Questions about "Restore System From Time Machine"

Looking to fix an apparent system corruption problem on my work machine, I discovered the "Utilities > Restore System From Time Machine" option of the Leopard installation disc. I have some questions that are not answered in http://support.apple.com/kb/HT1177:
1. Does this option erase the hard drive and install a fresh system from DVD, or do I need to do that in a separate step?
2. What about software updates - when are they applied?
3. Will third-party system extensions be reinstalled OK?
4. I tried launching the process on my home machine, just to see how it works. At work I have a dedicated disk for Time Machine, but at home I have a Time Capsule, serving two Macs via Ethernet. I've also configured the TC to give us a shared volume; so in normal operation I have two network volumes, <Username>, containing Time Machine's sparsebundle file for that user's Mac, and "Shared". When I boot from the installation DVD and run "Utilities > Restore System From Time Machine", the backup volume list only shows the "Shared" volume. If I select it, I'm prompted for my TC username and password; I enter it, TC spins up, and then nothing. I cannot continue the restoration process, and reselecting the "Shared" volume does nothing. ???
Thanks in advance for your help.
-- Phil

For the record, here's what I've found out so far:
1. The "Restore System From Time Machine" option seems to want to restore everything, including the system, from the Time Machine backup. I wanted a clean system install, so I did an "Erase & install" followed by a "Restore from Time Machine" in the Migration Assistant. That got me most, but not all, of my settings back; exceptions include the printer configurations, the desktop picture, and the Dock settings.
2. Software updates can be applied after the new system is rebooted.
3. Most 3rd party extensions seem to have been restored OK, but some (like MacFuse) were not.
4. I'd still be grateful for any hints concerning how to get "Restore from Time Machine" to work with a Time Capsule.
-- Phil

"Restore system from backup" doesn't work

Hi folks! I've got a strange little problem and my normal rampage through Google hasn't dug up anything, so I figured I'd ask it here.
I currently have an early 2011 MacBookPro running 10.6.8 on an Intel SSD. A few days ago I figured I'd install an XP boot camp partition for the occasional bout of gaming (mmm... Skyrim... *dreamy look*)
So I made my Time Machine backup up-to-date, burned a CD with drivers, and let Disk Utility play with the partitions. Only thing was it said it couldn't do the job due to space issues and suggested I wipe the disk first.
Ok, no problem. My Time Machine backup was snug and secure and I've got plenty of install experience. I popped in the Lion DVD I'd burned for my other iMac and booted from it. Strangely, it give me an installation error (I guess it tries to install automatically without user interaction). But that's fine since I didn't want to install Lion anyway (I'm addicted to SL's Spaces). So I ran Disk Utility again with the partitions the way Boot Camp had advised (GUID, 2 partitions). This also worked without a problem.
Then I attempted the option "Restore system from backup" in the Utilities menu, and lo and behold: nothing happens. Nothing happened at all. No drive spin-up, no color wheel, no indication of any activity whatsoever. If I select any of the other options, it opens promptly, but clicking the restore option is as productive as a glob of ant spit on a meteor strike.
So I figure, still no worries, maybe the Lion disk has issues. So I take out my Snow Leopard DVD and boot from that. Never gave problems before, but alas: the iMac refuses to boot from it and starts throwing out 3 beeps every 5 seconds or so. (Googling the beeps pointed me to memory issues. Wait.. Whut?!?)
Okaaay. Then I tried it with my Leopard DVD. Once again, won't boot, beeps.
The Lion DVD seems to be the only DVD I can boot my mac from. The only thing I can guess at is that Apple prevents us from installing with older DVD's because of driver issues, which makes sense I guess. But I had Snow Leopard running fine up until now. I've tried several different partitioning schemes including the default one for an installation, but no cigar. Both Disk Utility and futil show both drives are visible and ok.
Anyone have any ideas? Thanks in advance for your time!
regards,
Meindert Honig

lepkitty wrote:
you should see the time machine come up and be able to select a date on the rite. the screen should look like its something out of star trek with several windows going back into a star like looking thing. if you see that then you want to do is select a date then click restore. you will be promoted that doing this will erase the computer, thats ok! its going to erase it and replace it with what your restoring.
You're mixing two very different things. You get the +Star Wars+ display, with the timeline on the right, only when browsing via +Enter Time Machine.+ Restoring something from there +*does not erase your entire computer!+* It only replaces what you've selected to restore.
If you do a full system restore (meaning boot volume), starting with your Install disc (per #14 in the Frequently Asked Questions *User Tip,* also at the top of this forum), there is no "Star Wars" display, and only the drive/partition that you select as a destination for the restore is erased.

HT201250 I don't store any files on my computer, I store them on a hd. Can I restore docs from my hard drive if they were backed up using time machine? And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.

I don't store any files on my computer, I store them on a hd. Can I restore docs from my hard drive if they were backed up using time machine? And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.

ehphotograph wrote:
Can I restore docs from my hard drive if they were backed up using time machine?
Yes.
And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.
Also yes.
Directly-connected external drives (ie, USB, FireWire, Thunderbolt) are not backed-up by default. You must remove them from the exclusion list in Time Machine Preferences > Options to get them backed-up. (Network drives cannot be backed-up.)
And they must be formatted for a Mac -- any variation of Mac OS Extended.
If the drive is connected, you can browse or restore normally -- just go to the folder or document in question and Enter Time Machine.
If the drive is not connected, it's a bit different. See #E3 of Time Machine - Troubleshooting.
Message was edited by: Pondini

Recovering Mac HD via Time Machine Backup fails because "Restore system from backup" doesn't show in Utilities Menu of original install. DVD

Hi, after serious problems (troubleshooting didn't help) with my iMac G5 (PPC) running Mac OS X Leopard I've tried to recover my Mac HD via Time Machine (exactly as described by David Pogue on page 242 of the Leopard Missing Manual). However, "Restore system from backup" in the Utilities Menu of my original Leopard installation DVD failed to show up. What can I do?
Any assistance will be greatly appreciated -
Ballant

Hi Ballant,
I'm not very good with TM, nor a fan of it, but our resident king of TM, Pondini, has a vast array of very well done TM trouble shootings...
http://pondini.org/TM/Troubleshooting.html

Restoring System from Backup

When the mac os x cd installer is running you can go to "Utilities" and "Restore System from Backup". Does this command install snow leopard and then add the time machine files or does it just restore the files (meaning you will have to install Snow Leopard first).

Have a read here How do I restore my entire system?
It restores both the OSX system and the user files (applications and data).
Stefan

HT1553 I'm trying to restore data from an external drive to the Macintosh HD that is was originally recovered from. I'm using disk utility and hit a brick wall when I click restore it asks me to scan the Macintosh HD but doesn't let me do this. what do i

I'm trying to restore data from an external drive to the Macintosh HD from which they were originally recovered. I hit a brick wall where it says I have to scan it first and it doesnt let me.

After restoring System from TM backup is too big for drive

I had to restore my system from TM recently. When I plugged in the TM drive after restoring it tells me that there's not enough space on the drive to perform the backup.
Am I just going to have to chuck away the original backups and start a new one, or is there some way I can get the original backup to work again?

Hi, and welcome to the forums.
Yes, that's normal behavior, unfortunately. When you erase a disk (done automatically as part of a restore), everything you put back on it is treated as new: http://support.apple.com/kb/TS1338
You may need a larger drive for your backups. It varies greatly, of course, depending on how you use your Mac, but a "rule of thumb" is that TM needs 2-3 times the space of the data it's backing-up to be able to keep a reasonable "depth" of backups for you.

Restoring Files from Backup - Firewire Drive

Hello!
I recently performed a complete re-install of Tiger on my iMac G5, and it is working nicely now. I used SuperDuper to back up the my hard drive to an external firewire drive before doing the install.
Here is my issue: When I try to copy files from the firewire onto my internal hard drive, I get this message: "One or more items have special permissions and cannot be copied. Do you want to skip them?" For example, I received that message when I tried to copy SuperDuper from the firedrive into my internal drive.
I do not want to bring everything from the backup onto my machine since I believe it was software that might have caused my issues which led to reformatting to begin with.
Is there a way to bypass this error? A key combination, perhaps?
Thank you for your time!
E

For apps, I would reinstall from the source. There may have been corruption over time. Most Mac OS X app files are not single files at all, but a package, which is like a folder. You can look inside by right (control) clicking on an app and select +Show Package Contents+. Some apps that use an installer program may also place support files at +Library/Application Support/+, both at the root level and user account level; you may not know about those files. Also, there may be a newer version available (for downloads) that you didn't even know about.
However, for the apps that were drag-and-drop installations, it should be OK to do the same from your backup, if you don't want give your apps a fresh start along with the OS reinstall on a blank volume.
FYI, there is a way to get a fresh Mac OS X system without reinstalling apps, or even restoring your user data. You use the +Archive and Install+ option in the Mac OS X Installer. This will retain user accounts and settings, as well as third-party apps, while installing a fresh system. You should still backup your data as a precaution (since something bad could happen), but your data should still be there when you restart into the fresh system. Your installed non-Apple apps should also be there, although you may need to reinstall or re-register some apps. The bundled Apple apps get reinstalled.
As for your immediate permissions issue, try copying it from the external drive into the Shared user folder at Users/Shared/. If that works, try moving it from there into your user account folder

RESTORE SYSTEM FROM DISK IMAGE

Hi people,
I was wandering if anyone could help me with this little thing. I hate Time Machine, so that's not a viable solution for my inquiry. What I want to do is migrate my whole SL system from my old MacBook to my new one. Is it possible to create a Disk Image of my old MacBook's Hard Drive with Disk Utility or any other software and then restore SL from it in my new one?
*I know many of you may think TM is great, but I don't like it, so PLEASE spare me from lectures on why I should use it. I know I sound harsh, but every time I post something like this ten out of every eleven responses are about that.
*PLEASE, I BEG you, don't inquire upon why I want to do it this way. Again, I sound mean, but most of the responses I get are usually a pile of uselessness that just takes up space and doesn't help.
Thanks a lot for your time,
ThePhazonMonkey

Thomas is right. Restoring an older Mac's "whole SL system" (which I take to mean the entire contents of its startup disk) to a different one is a bad idea, whether you do it with a disk image, clone, or that app you hate so much.
In the first place, there is no guarantee that the OS version on an older Mac will have all the files needed to support the newest ones, so all you may get for your efforts is a new Mac that won't boot at all or kernel panics soon afterwards.
In the second, there is no guarantee that all the user & system settings from one Mac will be compatible with those of another. The OS will do its best to compensate for this, for instance by using defaults when the other Mac's settings are invalid or incompatible, but the process is not foolproof & you may experience instabilities or unexpected behavior that will be hard to track down & remedy.
Do as Thomas suggests & use Migration Assistant, or better yet use Setup Assistant on the first startup of a new Mac to avoid any problems with duplicate user account names. (You cannot merge two existing user accounts with any automated software because each has its own set of home folder items that will conflict with the other's, so you must manually choose which ones to use with the account you want to keep.)

R & R problem restoring files from usb hard drive

First, I am new to the forum so forgive me ahead of time if I violate any rules...
My probelem involves:
Rescue and Recovery 4,21
Thinkpad x61 Tablet
Vista Business 32 bit, Service pack 2
USB hard drive
Here are the details - I restored my system from a backup (on a usb hard drive) using R & R. I chose the option to save the files that were created or changed since the backup to the usb hard drive. The restoration was successful (mostly - so far). However, I have been unable to restore individual files from the usb hard drive that I saved as part of the restoration process. I can see the files on the usb hard drive, but they do not appear when I attempt to restore them using R & R. How can I restore these individual files? Thanks in advance.

Mmm ok thanks I'll look I to that then. To be honest, HFSExplorer has been pretty good but sometimes doesn't work. So I'll check out what you suggested.
Thx

Restored system from Time Capsule but now lost access to the backup files

Last week, my drive flaked out and I had to restore my system from my Time Capsule. Now everything is back to normal except that I've noticed that upon trying to auto backup my Mac Pro, it says the disk is full. When I use Time Machine to access my old files, it appears I no longer have access to anything I had previous to restoring my system from my Time Capsule. I believe the link to the old backup file is broken and it's trying to create a new full backup file, in addition to keeping the old file.
Is this normal behaviour after a full restore from a Time Capsule or can I still somehow relink my computer to the file from which it was restored, and still have access to my backup files?

kencanuck wrote:
Last week, my drive flaked out and I had to restore my system from my Time Capsule. Now everything is back to normal except that I've noticed that upon trying to auto backup my Mac Pro, it says the disk is full.
Yes; everything you restored is treated as changed and will be backed-up again: http://support.apple.com/kb/TS1338 Time Machine most likely deleted all but the last backup, trying to make room for the new one.
When I use Time Machine to access my old files, it appears I no longer have access to anything I had previous to restoring my system from my Time Capsule.
Exactly how did you restore? Did you restore your entire system, starting with your Snow Leopard Install disc?
If you didn't, it's possible the account you're using is not recognized as the same one on your backups.
Can you see the last backup? If not, see #E2 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
Message was edited by: Pondini

Restore System from Q: Lenovo_Recovery Drive

Similar Messages

Maybe you are looking for