Restore System

Hello
I am now on OS 10.6.6 and wish to revert to an earlier version. How do I know when the earlier version was in operation, and as most questions seem to refer to a complete system restore can I just restore the system folder in the Mac OS Drive so that my Users folder remains as now.
Thanks

Hi Roy
System Preferences-Software Update-Installed Software should show you the dates & names of OS updates,
You can't just restore the 'system' folder, no - since the OS is more than just that, but reinstalling from DVD then applying the relevant combo & other updates, should leave your users folder entirely as it is. Best to have a backup of course.

Similar Messages

Restored system from Time Machine backup disk but the system could not start-up

On MacBook Pro early 2008, restored the entire system from Time Machine backup disk to the entire disk.
The previous system on the backup disk had FileVault turned on.
The restore completed successfully and I was prompted to restart the system via the new restored system disk.
I heard the normal start-up sound, then the Apple logo, but it stuck at the logo screen. And the cooling fan run at almost full speed?
I have been waiting for a few hours, guessing it might FileVault the disk.
Finally I have to shutdown the machine as it stuck at the logo screen forever.
Anyone has the same issue? Any ideas?

BTW, I also tried Repair the system disk, Fix permissions via Disk Utility.
I guess I must lose some files either during the backup or the restore.

HP Pavilion dv6 Notebook PC: restore system and drivers

Hi. Some days ago I faced a bad experience with my laptop HP Pavilion dv6 Notebook PC. System crashed. At anytime I tried to switch it on, a message error appeared and system was blocked. Message was: FILE:\BOOT\BCD Status 0xc000000f, asking for running the Windows 7 System disk. But System disk didn't run at all. I checked situation and found the hard disk with 6 partitions instead of 2. I found a partition named BOOT (X that was a replica of C:. When I tried to restore the system by the recovery disk, something got control of the recovery disk, so that C: could not be formatted; neither X: was. Also, I tried to cancel files in X: but disk was protected and didn't allow any changes. So I could only get my hard disk uninstalled and all the partitions were cleaned off. I got my hard disk perfectly cleaned, but my recovery disk could not be installed properly. Therefore, system was not restored yet. My question is: what should I do to get my laptop with restored system? any ideas?
This question was solved.
View Solution.

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
Depending on the age on your computer, it may have come from the factory with 5 or more partitons. This is common on newer computers that utilize UEFI and GPT partitions. The "Windows 7 System disk", the computer wass asking for is either a Windows 7 installation disc or a Windows 7 Repair Disc. Neither of these discs come with your HP computer and must be downloaded and/or created in Windows.
Start by using your HP Recovery Disc set (should be 3 or more DVDs). Insert disc #1 and reboot your computer to start the process. Insert the remaining discs as requested, until the recovery is finished.
If this doesn't work and you can read the 25-digit Microsoft Windows 7 product key on th Microsoft COA affixed to your computer, please see "How to Install Windows 7 Without the Disc" to download Windows 7 SP1, create the Windows installation DVD, and install Windows 7. If you prefer to install Windows 7 from a USB Flash Drive, please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash Drive. After installing Windows using this method , you will no longer have any HP customizations or software. You will also need to identify and download drivers for hardware devices that Windows 7 didn't already supply drivers for.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly. I verified my disk and found errors that could not be repaired. I erased the drive and restored system back to the previous day.

I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly. I verified my disk and found errors that could not be repaired (errors were associated with boot drive) I erased the drive and restored system back to the previous day. Has anyone else experienced this problem?

Since it's a new machine, contact Apple's Support and let them deal with it. Allen's already recommended an Apple repair station visit. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you might be eligible for an onsite repair since yours is a desktop machine (depends on where you're located). BTW, the AppleCare Protection Plan's the best warranty policy available for desktop machines. Get it if you don't have it before contacting Apple.
27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

Upgrade MacBook Hard Drive - Restore System from Time Machine Backup?

I have a MacBook that I want to upgrade the hard drive of. Am I right in thinking, all I need to do is:
Run Time Machine one last time, to make a recent backup of the MacBook
Install the new hard drive in the MacBook
Insert the Snow Leopard DVD, and start a clean installation
During installation, select the option to Restore System From Backup...
Will this copy across ALL of the contents of the old MacBook's hard drive, to the new MacBook's hard drive? A perfect clone? Because that's what I want to do.

I performed the installation, restoring a Time Machine backup from the external hard drive to the new blank internal one I put inside the MacBook. Everything went fine, except for one problem.
Now, whenever I try to open Safari, it immediately crashes with the error message:
"Safari quit unexpectedly
Exception Type: EXC_BAD_ACCESS (SIGSEGV)"
What's going on? How can I stop Safari from doing this? I've repaired permissions using Disk Utility, and Spotlight has finished re-indexing everything.

Restore system image over windos 8.1 restore

Hi all new poster so sorry if in wrong place move if needed.
What I would like to know if I have a disk image of my 8.1 system as I like to have it set up IE my antivirus and documents etc.
Can I use toshiba recovery to restore back to factory settings then us my disk image on dvd to restore system to how I like it to be.
In other words how I would of had the restore partition if I have been able to make the restore system on the "D" drive without all the rubbish that is installed by the factory.
dpick1947

Yes, you can use Windows 8.1 to create an image of your current disk. Better to put it on an external USB drive rather than DVDs.
Control Panel > File History > System Image Backup (at the lower left)
I made a shortcut to sdclt.exe to go there. But it must run elevated as follows:
Right-click the shortcut > Properties > Shortcut tab > Advanced button > Run as administrator
You can restore it after installing or restoring Windows if you like. But it's easier to boot Windows 8 recovery media and restore directly.
We create an image every night and retain the most recent ten for backup.
-Jerry

Recovering Mac HD via Time Machine Backup fails because "Restore system from backup" doesn't show in Utilities Menu of original install. DVD

Hi, after serious problems (troubleshooting didn't help) with my iMac G5 (PPC) running Mac OS X Leopard I've tried to recover my Mac HD via Time Machine (exactly as described by David Pogue on page 242 of the Leopard Missing Manual). However, "Restore system from backup" in the Utilities Menu of my original Leopard installation DVD failed to show up. What can I do?
Any assistance will be greatly appreciated -
Ballant

Hi Ballant,
I'm not very good with TM, nor a fan of it, but our resident king of TM, Pondini, has a vast array of very well done TM trouble shootings...
http://pondini.org/TM/Troubleshooting.html

OS 10.6 - Please help - problem restoring system from time machine!

Hi there,
Today I installed a little program to convert flac audio files to mp3. When I ran the program the computer froze, so I rebooted but then I could move the cursor but not click on any menus or icons on the desktop, they just wouldnt respond - so basically I couldnt use the computer. After re-booting a few times with the same result I decided to reinstall the system using time machine from an external hard drive. I reinstalled OSX, then reinstalled Snow Leopard, then reinstalled the system from a previous save from Time Machine. It said the installation was successful, but when the computer restarted a message comes up saying "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again". Ive done this about 5 times now but it always just says the same message without starting properly. WHAT DO I DO???? I really need to use my computer tomorrow so any help is hugely appreciated!!! TIA
PS. i have done a hardware test in "loop mode" and it says everything is fine

HiDef Jules wrote:
Hi there,
Today I installed a little program to convert flac audio files to mp3. When I ran the program the computer froze, so I rebooted but then I could move the cursor but not click on any menus or icons on the desktop, they just wouldnt respond - so basically I couldnt use the computer. After re-booting a few times with the same result I decided to reinstall the system using time machine from an external hard drive. I reinstalled OSX, then reinstalled Snow Leopard, then reinstalled the system from a previous save from Time Machine.
how exactly did you reinstall the system from TM? please give details. the correct way to do it is to boot from the snow leopard DVD and use the "restore system from backup" utility in the Utilities menu. there is no need to reinstall anything prior to using that utility. the restore utility wipes your hard drive and restores it to the state it was in at the backup time.
It said the installation was successful, but when the computer restarted a message comes up saying "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again". Ive done this about 5 times now but it always just says the same message without starting properly. WHAT DO I DO???? I really need to use my computer tomorrow so any help is hugely appreciated!!! TIA
PS. i have done a hardware test in "loop mode" and it says everything is fine

Can't find Restore System from Backup In utilities

Ok I messed up my os and I need to do a restore system from back up I can't seem to find the restore system from back option in my utilities when i am running the installer with the os installer disk and when i have my external hooked up it just wants me to install in to that thing I don't know what that would do. I have read the article about restoring the entire system and that what I need to do but I can 't because my messed up os wont let me restart/shutdown with out pushing the power button I am tempted to just erase and install but I don't even know how restore with my time machine and plus i am scared to do it
any help would be most welcome i have been trying to fix this for about month now

I almost understand what you wrote, but it's so confusingly written I'm not sure how to reply. So give this a try:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Restoring System from Backup

When the mac os x cd installer is running you can go to "Utilities" and "Restore System from Backup". Does this command install snow leopard and then add the time machine files or does it just restore the files (meaning you will have to install Snow Leopard first).

Have a read here How do I restore my entire system?
It restores both the OSX system and the user files (applications and data).
Stefan

Cant open photoshop CC after restore system.

Hi, yesterday i had to restore system to 7 days ago, I also installed ph cc 3 days ago, so when the restoration finished i was not able to use it. When I open creative cloud manager it says that i have photoshop installed and updated, but that is not true cause i cant use it. I unistalled creative cloud, i deleted all files of photoshop, reinstalled cc manager and still having the same problem, still cant use photoshop cc. I hope u can help me cause i cant unistall PH , cause its like not installed. Thanks you.

Run the Creative Cloud Cleaner Tool and try again.
Mylenium

Restore System State problem

Hi All,
There were some changes done to the Runtime Systems of a track and were saved. When performed a Restore System State, it kept runnning for a very long time and so the server was restarted and tried it again. After the third server restart, in the queue, it shows the status as import running.
Since the Restore System State is initiated once, the compartments are empty, so existing DCs do not appear anymore.
Does anybody has an idea whats going wrong and how to delete the queued entries and do a successful restore system again?
Any help is greatly appreciated.
UPDATE 11/13: Left for a day running, now I can atleast see the developed DCs in the compartments but still not JTECHS/JBUILDT/JEE DCs. I managed to unqueue them and started the import again. It still seems to be taking quite some time.
Thanks a lot,
Rajit
Message was edited by:
Rajit Srinivas

Hi Rajit,
just as a quick checklist: does anything happen on CBS?
Is the input mode set to PRIVILEGED? If not there's some communication problem between CMS and CBS, check logs for HTTP timeouts or similar issues.
Are there any requests queued, but not processed? If yes, is CBS set to idleStart=true in the service properties?
Is there maybe not enough diskspace available, or is the temp-space for CBS on a RAID 5 that could explain poor filesystem performance?
Is the database on the same machine, is there maybe some problem there?
Does the default trace in the log viewer show any issues with the engine installation?
Regards,
Marc

How to restore system RAM memory when i run DI batch job process

How to restore system RAM memory when i run DI batch job process
I use SAP-B12005SP53 and i develop with Business Partner Object

HI ALL
TAKE CARE: Nothing was working in VB6, but in .NET it sets the default value !
from help of VS.
When you assign Nothing to an object variable, it no longer refers to any object instance. If the variable had previously referred to an instance, setting it to Nothing does not terminate the instance itself. The instance is terminated, and the memory and system resources associated with it are released, only after the garbage collector (GC) detects that there are no active references remaining.
Garbage Collector distroyes the objects at the end of the sub of function, not in the loop.
So use local variables when you loading the 7000 items. For me working fine and i do not have a memory problems. I am loading 50000 items with prices from EDI file, and memory usage stops at 120MB.
1st solution create a sub or a function to populate the data, and run this for every items by as single rutin,
sub x
    Dim obj As New Object()
        Try
... put here your update code
        Catch ex As Exception
        Finally
            GC.Collect()
        End Try
end sub
This free up the memory when Garbage
2nd solution: use inner loop definition
sub x
Try
            Do While True
                Dim obj As New Object()
            Loop
        Catch ex As Exception
        Finally
            GC.Collect()
        End Try
end sub
This free up the memory inside the loop.
I recommend to use Friend Class keyword for your addon declaration and do not use modules.
Modules and shared classes will be free up the memory when your program terminates execution.
For more information see MSDN help http://msdn.microsoft.com/en-us/library/7ee5a7s1(VS.80).aspx
and http://msdn.microsoft.com/en-us/library/0x9tb07z(VS.80).aspx
Regards,
J
Edited by: János Nagy on Oct 15, 2009 2:17 PM

HT4623 my iphone 5s is 3 weeks old and a software update put it in recovery and Ive tried restoring it and itunes said that it cannot be restored system error 40

my iphone 5S is 3 weeks old and a software update put it into recovery mode and I tried to restore it and it can't be restored system error 40, ***?

https://discussions.apple.com/thread/5347392
a bit insensitive they named it 40 though

Help itunes hate my ipod and want to restore system repeatedly

So I got the NikeID+ and for awhile everything worked fine. Now everytime I connect my IPOD to itunes I get a screen that says itune detected ipod in recovery mode must restore system to continue. the first few time I said ok and begrudgingly lost everything on my ipod as it restored itself. However, I still got the same message from itunes after multiple restores. So I reinstalled itunes. And then my ipod worked fine uploaded to the nike site accessed song etc. Until the next time I tried to connect my ipod. Got the error again. Reinstalled and it work fine again. What is going on? I am tired of having to reinstall itunes everytime I connect my ipod

Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore

TM doesn't see its backup after migrating to new iMac and restoring system.

TM doesn't see its backup even though it still exists on the HD. I just migrated to a new iMac. After using OS X disc to 'Restore System From Backup' with TM backup it was showing the latest backup attempt had failed. The same disk was highlighted under TM Preferences too. But once I reset it TM began to make a new backup under a new folder/computer name (adding a number to the end). Is there a way to make TM see the existing BU and continue on?
Message was edited by: Sakahara

I'll try to recall to the best of my memory what I did... It's been stressful, frustrating, trying to deal with it.
Computers:
1) iMac6,1 (Late 2006) Intel 2.16 GHz Nvidia OS X 10.5.6
2) iMac8,1 (Early 2008) Intel 2.8 GHz ATI OS X 10.5.4
Perform final backup of iMac #1 with TM and SuperDuper!
Shut down and disconnect.
Hook up iMac #2 and power up.
After OS X intro select 'Transfer from another Mac' with Set Up Assistant (note: this was from the SD! backup).
Everything was selected for transfer; Users, Apps, Network,..etc. (I assumed it would update OS X too).
Transfer complete.
Restart.
Log in.*
* I have both Admin and User account. I noticed things weren't performance was off; log in was slow (Menu Bar items took longer to display, clock too), and generally overall apps,..etc seemed slow. Apps were asking for license and reg info too.
Second attempt (restore system from TM backup):
Startup from OS X 10.5.6 disc.
Erase HD with DU.
Select 'Restore System from Backup'.
Select TM backup.
After that completed, restart computer.
And that brings us to now. Well, sort of.
So what is the proper way to migrate as it were from between two different Intel iMac's? I have to assume I transfered over system files that caused a conflict with the new iMac's HW, correct? What can I do now? I've already performed new backups of both SD! and TM. I didn't think it mattered since either way the backups come from my old system. I'm guessing I should have updated OS X first on the new iMac and only selected User files, Apps, Network settings,.. etc., for transfer, or maybe installed apps fresh. I thought I was doing it correctly.
The new iMac still seems off with performance to me. I've tried performing multiple 'Repair Disk Permissions' too. There are about 32 differing permissions but DU doesn't seem able to repair them as they come up again and again. Here are some examples;
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:47 -0700: Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/BlackAndWhiteEffect.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/CubeTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DissolveTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/DropletTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
2009-05-15 09:23:52 -0700: Permissions differ on "System/Library/PrivateFrameworks/iPhotoAccess.framework/Versions/A/Resources/P lugins/FadeThroughBlackTransition.IAPlugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
My final attempt to straighten this out is to install from OS X disc fresh (erase/install). Transfer only User files, Network settings, anything pertinent to my Users (email, browser, keychain,..),... and nothing else. Reinstall 3rd-Party Apps. I had to do this before after updating from Tiger to Leopard because it didn't take well.
Any help/insight appreciated.

Restore System

Similar Messages

Maybe you are looking for