Restore the backup from tape to some other server

Dear All,
I need to restore the backup from tape to some other server.PLease suggest the command and setp to do that.
Regards,
Kumar

Hi,
I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
allocated channel: t1
channel t1: sid=2386 devtype=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.4.1.0
Starting restore at 09-MAY-10
channel t1: looking for autobackup on day: 20100509
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/09/2010 11:57:01
ORA-27191: sbtinfo2 returned error
Additional information: 2
RMAN>
Thanks,

Similar Messages

Steps to restore RMAN backups from tape to disk

Hi All,
using Netbackup Veritas Volume
DB:10.2.0.3.0
OS:AIX 64 bit
Could nayone please share the steps to - restore RMAN backups from tape to disk.
An early reply would be appreciated!!
Thanks for your time!
Regards,

Hi,
I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
allocated channel: t1
channel t1: sid=2386 devtype=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.4.1.0
Starting restore at 09-MAY-10
channel t1: looking for autobackup on day: 20100509
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/09/2010 11:57:01
ORA-27191: sbtinfo2 returned error
Additional information: 2
RMAN>
Thanks,

HT1766 when restoring the backup from itunes the iphone refuse the request

When restoring the backup from itunes the iphone refuses the request. How to restore to its original OS version?

Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Also... See Here > Configure security software

Restore RMAN backup from tape

I have to restore the RMAN full backup from tape to new host to a previous date say March 1st. My target database RMAN retention period is 28 days, today is 11th May.
Is it possible to restore the obsolete database from tape backup to new host as of May 1st. If not possible, I would like to restore the available backup say as 15th April from tape to new host.
Can you please provide me the steps to restore the tape old backup to new host.
Thanks,
Mahi

Can't read documentation? You also seem to be unable to mark questions as answered
Mahi
     Newbie
Handle:      Mahi
Status Level:      Newbie
Registered:      Nov 24, 2010
Total Posts:      24
Total Questions:      15 (13 unresolved)
Sybrand Bakker
Senior Oracle DBA

HT4500 The Genius Bar wiped my hard drive (10.7.2) and I have since been unable to restored the backup from my Time Machine

I followed these steps from this article;
In Finder, press Command-Shift-U.
Double-click Migration Assistant.
Click "Continue" and enter an administrator name and password when prompted.
Select the "From a Time Machine backup or other disk" option, then click "Continue".
Select your Time Machine backup disk or Time Capsule (enter the user name and or password if prompted), then click "Continue".
Having selected the correct disk nothing happened, other than the word "connecting" appeared. After some time this also appeared. "The backup disk image “/Volumes/Ross Backup Data/Ross’s iMac.sparsebundle” could not be accessed (error -1)". I tried both with the Time achine connected wirelessly and via Ethernet, with the same result.
Select the Time Machine backup you would like to restore (such the most current one you just made), then click "Continue".
Select Items to Migrate, then click "Continue". Note: The "Continue" button will be dimmed until the "Calculating…" stage is complete.
Any ideas please?

How big is your Time Machine image? If it's really big (eg, several hundred gigs), it can take a lot of time to calculate the time needed to restore it onto your Mac. This said, I'm still on SL, so maybe you have to reinstall Lion from the restore partition first, then migrate your personal stuff from the Time Machine image.
Additionally, you'd be better served if you posted this thread in the Lion part of the forum...

HT1414 having trouble restoring the backup from icloud to my new iphone

I cannot restore my icold backup to my new iphone. Any tips?

If your backup is newer than the iOS on the phone, you cannot restore from that backup until you update the iOS on the phone first. So is your backup from a newer iOS than what is on the phone? If so, update the phone and then restore from the backup.
If you would share what happens when you try or provide seem more details - it would be a little easier to offer suggestions.

I just got a 4s. Can I restore the backup from my 3Gs to my new 4s?

Hi,
I just got an iPhone 4s. I would like to tranfer the data from my 3Gs running IOS 4.3.5 from a backup of my 3G to populate my 4s.
Can this be done or must I update my 3Gs to IOS 5 first?
Thanks.

Backup your 3GS with iTunes, then connect your 4S and when prompted elect to restore from this backup rather than set up as new. See http://support.apple.com/kb/HT2109.

Restoring RMAN backup from tape beyond retention policy ??

Hello Friends,
I just stuck in some basic finding. Need your help to resolve the questions.
How we can use RMAN backup to restore oracle database when the RMAN backup pushed to tape already and being a OLD backup ( before retention policy date).
Just to elaborate a more.. Say my retention policy is 3 days. I want to restore from a old backup like 30 days old.
So surely the requesting backup is behind retention date and has been pushed to tape.
Please suggest.
Thanks in advance.
Regards
Sinha.

dba.arnab wrote:
Hello Friends,
I just stuck in some basic finding. Need your help to resolve the questions.
How we can use RMAN backup to restore oracle database when the RMAN backup pushed to tape already and being a OLD backup ( before retention policy date).
Just to elaborate a more.. Say my retention policy is 3 days. I want to restore from a old backup like 30 days old.
So surely the requesting backup is behind retention date and has been pushed to tape.
Please suggest.
Thanks in advance.
Regards
Sinha.
Assuming the actual backup files still exist (the only thing actually deleted is the record of them in the catalog), you can make those files available and use the rman 'catalog' command to re-catalog them.

Restoring the backups from mysql

Hello techies,
Iam using mysql server 4.1.1 and also the administration 1.0.
I had backup database in my local system.
when i am restoring it back. it showing u r database is resotring .
But actually where it is restoring.
It is not available in back up file.
Thanks in advance,
ramu

Hello techies,
Iam using mysql server 4.1.1 and also the
o the administration 1.0.
I had backup database in my local system.
when i am restoring it back. it showing u
t showing u r database is resotring .
But actually where it is restoring.
It is not available in back up file.
Thanks in advance,
ramuwhat?
ramu try again and this time a little slower. i am not really even clear on what problem if any you are having.

Problem when restoring Backup from Tape...

Hi
I am getting the following error when I am trying to restore a backup from Tape on AIX system:
BR0279W Return code from 'LANG+C cd /oracle/RSD/sapbackup && LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt0': 0
BR0359W Restore of /oracle/RSD/sapbackup/.tape.hdr0 from /dev/rmt0 failed due to previous errors
BR0218W Checking label on volume in device /dev/rmt0 failed
BR0236I Perfhaps volume initialization with option '-i force' required
I have initialized the tape before backup to label RSDB05 which I used while taking the backup.
When I initialized the tape as mentioned above with '-i force' then while restoring there is problem of timestamp.
How to restore the backup from tape now.
Regards
Chin2

Dear Ahamad,
In this command " brrestore -b xxxx.anf -m all -p /oracle/TRG/102_64/dbs/initSRC.sap " you are calling parameter file of source system initSRC.sap in which system is checking parameter/option 'compress_dir'. Please check if its same. Why you have replaced the SSID with TSID its not required at all.
Please follow these steps....
Place xxxxx.anf file in backup directory. check for parameters in initSID.sap file of TRG system. It should be the same as of SRC system.
Try again and post result if you are getting any error.
Regds
Anil

Problem Restoring iTunes backup from DVD

I've searched and haven't seemed to find an answer to my particular issue, so if this has been asked and answered apologies. Here's my situation:
I am able to backup my entire library on my windows computer to move everything over to my imac. During the backup I didn't get any error messages. I restore the backup from DVD but for some reason one of the disks just will not restore and I have to keep skipping it. I can open it up and I see the files there, compilation folder with songe folders inside, some audio books, an album or two purchased from iTunes and a few albums from CDs that I actually own the physical media. I presume something is corrupted but don't know what.
My question is this: has anyone else experienced a similar situation and if so, were you able to get the disk to restore? If not, is there a way that I can select just the items from this bad disk to backup so that I don't have to do the entire back up again? As previously mentioned, I can browse the "bad" DVD and can see the items and folders? At the very least, I'd like to backup and restore the itunes purchased music and audio books and compilations; the other items I can just import from the cds that I own.
Thanks...I'm really getting frustrated after having tried this five or six times.

can somebody help i/m basically having the same problem but my error message says an unknown error occurred

Can you restore a backup from an iPhone 6 to an iPad 2?

I bought my wife an iPad 2 and I want to set it up to be just like her iPhone 6 (absent the iPhone only apps, obviously). However, I cannot seem to get it done.
I do not use iCloud backup - this is from a backup on a Mac running Yosemite via iTunes. Both devices are running iOS 8.1.3.
I select 'Restore Backup', then select the backup of my wife's iPhone and I get a message: "Settings and data from some apps are not compatible with iPad and will not be restored." I figure this means it will restore everything except the iPhone specific apps.
I click 'continue' and it appears to go through the restore process, but then nothing gets installed on the iPad.
Thoughts?
MotionMan

I restored a backup from a DIFFERENT iPad (mini) to my target iPad 2. I have not been able to restore the backup from the iPhone to the target iPad.
I have tried the following:
Backup of iPhone 6 to target iPad 2 - Fail
Backup of iPhone 5S to target iPad 2 - Fail
Backup of different iPad mini to target iPad 2 - Complete
So the target iPad 2 will take a restore from a different iPad (mini), but not from two different iPhones.
Is it just me, or can such a restore just not be done?
MotionMan

Restore a backup from time machine

I made a clean install of Mountain Lion on the MB Pro of my wife from a bootable USB drive. All went well until I tried to retrieve data from her Time Machine backup that are stored on our Time Capsule HD. In setup, and later in migration assistant only the backup of my own MacBook Pro was found. Nevertheless the last backup of my wife's MB Pro, shortly before the clean install, finished succesfully. Also, I can see the sparsebundle in Finder and I can also mount it. I tried to repair the sparsebundle with no success. I have two questions. Firstly, what else can I try to make the backup available to Migration Assistant and secondly, is it possible to copy files and directories from the mounted sparsebundle as a last resort to retrieve the data that is visibly sitting there? Any help is most appreciated.
PS I copied the sparsebundle to an external USB disk in the hope that Migration Assistant would `see' it, again without success.

jan willem3 wrote:
Thanks, Pondini, for the quick reply. I will try out your suggestions. I intended to do a full restore from the backup system. However, as I did already perform a clean ML install, the backup is no longer recognized by Time Machine as belonging to that MB Pro. So, if I click the TM icon nothing happens.
Apple doesn't make it clear, but that's not how you do a full system restore. You start from your Recovery HD and use the option there, as detailed in Time Machine - Frequently Asked Question #14. It doesn't matter what's on the OSX volume, since you're not running from it, and it will be erased before the backup is copied to it.
PS The repair I tried was based on the procedure explained onhttp://www.garth.org/archives/2011,08,27,169,fix-time-machine-sparsebundle-nas-b ased-backup-errors.html and the result of running fsck_hfs was that it could not be repaired.
Not a good sign. That may be why Migration Assistant didn't recognize it.
It's possible a 3rd-party heavy-duty disk repair app, such as DiskWarrior, can fix it, but DW is about $100, and there's no guarantee it can fix the damage.
The full system restore might work, depending on where the damage is, but it's a crapshoot. If you get far enough to see the list of backups, but restoring the most recent one fails, see #E8 in Time Machine - Troubleshooting
The attempt might have made a mess of the sparsebundle, but luckily I have a copy on an external hard disk. Is it possible to restore the backup from the external hard disk, despite the fact that the data are packed in a sparsebundle?
Yes, the full system restore, Setup Assistant and Migration Assistant can be used in that case. But most likely, the copy has the same damage as the original, so it's doubtful for that reason.
The Time Machine browser can also be used in that setup, if the backups aren't too badly damaged, but you must manually mount the sparse bundle first. In your case, you'll probably need to use the Browse Other Backup Disks option, per #17 in the FAQ. If the backups do appear that way, you can probably restore selected files and folders, unless you happen to hit the damaged spot(s). It's a bit of a crapshoot, too.

HT4847 I have a new iphone and cannot delete the backup from icloud. It says that it is in use. I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accoun

I have a new iphone and cannot delete the backup from icloud. It says that it is in use. I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accounts.

Follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770 (for Windows, substitute Outlook in step 2).

Camera roll empty but shows 6.1 gb. Restored to original settings after backing up. When I restored the backup camera roll still shows 6.1 gb and is till empty. I imagine that the backup contains some corruption

Camera roll empty but shows 6.1 gb. Restored to original settings after backing up. When I restored the backup camera roll still shows 6.1 gb and is still empty. I imagine that the backup contains some corruption

Hi cfgolf,
Thanks for contacting Apple Support Communities. I agree with your assessment that something is going on with that previous backup. If you restored from that backup and the issue continues, I would recommend restoring and Set up as new. Before you restore, make sure you Transfer content so that you can sync it back after setting up as new. The instructions on how to Transfer content and Set up as new are both listed in this article.
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/ht4137
2. Transfer content
Before you erase your device, take a few minutes to transfer your content from your device to your computer to ensure that all your critical data is safe.
6. Set up as new
Complete the setup assistant. When prompted to set up your device, select Set Up as New iPhone and tap Next to continue.
Skip the Apple ID sign-in, in case the original issue was related to any of your content on iCloud.
Note: After setting up as new, you will need to enter the Visual Voicemail password for iPhone (on carriers that support Visual Voicemail). If you've forgotten the password, contact your carrier to help you reset it.
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
If the issue is still present, you may want to contact Apple Support.
If the issue is now resolved, sync one type of content at a time back to the device. For example, if you had an issue playing music, add songs from iTunes and confirm they will play. If your contacts weren't loading successfully, add the contacts back. After each sync, test to see if the issue has returned.
Cheers,
-Joe

Restore the backup from tape to some other server

Similar Messages

Maybe you are looking for