Restore time machine backup

OSX would not load up for me on my iMac. I was on the latest version of Leopard. I reinstalled Leopard onto my Mac and then booted from the Leopard disc and chose the restore from backup option. I selected a Time Machine backup that I had done a couple of days ago and restored the Time Machine backup.
When the system went to restart after the restore, I now get, what I assume to be a Kernal Panic (prohibited screen/universal no sign, or whatever else it is called). Should I try to restore an earlier backup to see if that will work? I ran the Hardware test which did not point to any problems, so I am assuming that there might be something wrong with the time machine backup.
The only other thing that I can think of is that the Leopard that was installed on the system was an earlier version from when I bought the computer. But, I assume that wouldn't be an issue as I am restoring a full backup.
Any help/thoughts? Thanks in advance.

D wrote:
OSX would not load up for me on my iMac. I was on the latest version of Leopard. I reinstalled Leopard onto my Mac and then booted from the Leopard disc and chose the restore from backup option. I selected a Time Machine backup that I had done a couple of days ago and restored the Time Machine backup.
Reinstalling Leopard before you restored a full Time Machine backup was a waste of time, I'm sorry to say! The reinstall was completely erased when you subsequently restored from Time Machine.
When the system went to restart after the restore, I now get, what I assume to be a Kernal Panic (prohibited screen/universal no sign, or whatever else it is called). Should I try to restore an earlier backup to see if that will work? I ran the Hardware test which did not point to any problems, so I am assuming that there might be something wrong with the time machine backup.
While booted up from your Leopard DVD, launch Disk Utility from the Utilities menu. Do a Repair Disk on both your internal hard drive, and on your Time Machine hard drive. Repairing the TM drive could take several hours. Post back if any errors were reported that it cannot fix. If everything checks out OK, just try restoring a full backup again.
The only other thing that I can think of is that the Leopard that was installed on the system was an earlier version from when I bought the computer. But, I assume that wouldn't be an issue as I am restoring a full backup.
Correct. If the TM backup was only a few days old then there should have been no problem restoring it. My guess is that some hiccup happened along the way (it happens, just try again) or your TM disk has some corruption in it that Disk Utility might be able to repair.

Similar Messages

Restoring Time Machine backup to a drive in a "Voyager Dock"

Restoring Time Machine backup to a drive in a "Voyager Dock"
I would like to restore a Time Machine volume to a hard drive not installed in the computer it has backed up.
I have an iMac 24” with a failing drive. It will eventually need to be replaced.
I have my Time Machine back up for this computer in a Voyager Docking station.
I would like to have Time Machine “restore” the iMac’s data to a drive in another Voyager Dock running from a computer other than the iMac involved.
What I hope to do is bring the “restored” drive and the iMac to my Mac service provider and just have them swap the old drive for the new.
How do I get Time Machine to do this?

So, You're saying I can do this from a different computer with its own Time Machine?
In other words, I have my Time Machinedrive from the dead iMac and a fresh, formatted drive both hooked up to an unrelated computer with its own Time Machine.
If I enter Time Machine on that computer won't it show me the data it backs up for that computer only?
Will Time Machine know that there are two Time Machine backups (the one from the iMac and the one from the new host machine), and allow me to select the one from the iMac?

Mac Mini late 2012 Failed to Restore Time Machine Backup

Try to restore time machine backup to my mac mini. I have made backup right after I got the machine from apple. Now due to some reason I am trying to restore it but failing again and again. Error is something like this:
I have erase disk as default which is required for intel based model but still it didn't work. Please help me out.
Further I have also tried installing fresh 10.8 OSX by making bootable usb. It also didn't work. A question mark appears right after I select USB Bootable Drive at start.
Thanks

Yes same. When I try booting MBP with same usb it goes to recovery menu, (one which comes when you press Cmd+R) I think my MBP is running mavricks thats why it dont go to 10.8 setup. Further when I select same usb in mac mini it shows following screen.
Content of USB are:

Restore Time Machine backup after hard drive crash

My hard drive on the mac book crashed, so I replaced it. Now I need to get my time machine back up on the new drive. I've already started using the computer and reinstalled lion, so I'm not getting the original "backup" screen. How do I find my old time machine backups?

Your best bet is to do a full restore from your backups. See #14 in Time Machine - Frequently Asked Questions.

Restore Time machine backup from a stolen computer to a different Mac Pro

*My Mac Book Pro was stolen.* It had some Time Machine backups, but Time Machine had stopped working about 6 months before it was stolen. I had stopped using the USB drive since TM would never complete. (2 issues)
1. When I plugged in this USB backup disk to the Mac Pro just now, it asked me whether to use Time Machine with it. It told it no, ask me later so I could browse it first.
2. It looks like the old problem with Time Machine not backing up the stolen laptop shows up as a file called "2008-09-22.204132.inProgress". I am hoping that the backups previous to that one are okay. So far, browsing the files appears to me that my data is intact but perhaps spread across 40 folders.
So now, what should I do to retrieve the data I want?
A. Copy the data files and pictures manually without Time Machine? How do I know I will get the latest versions?
B. Use Time Machine with this disk and somehow ask TM to restore to a different machine? (Is that even possible?) (Will it merge the files into my user folders?)
C. Use Migration Assistant?
D. Copy and paste the entire file structure to a directory someplace and pull off the data as I need it?
*End result: I want my external hard disk wiped ASAP, and in the meantime I want my data files preserved.*
The old MacBook Pro definitely did not have Snow Leopard but the MacPro does to which I want to copy the data. It probably had Leopard. But honestly my user data is not necessary, just primarily the data, pictures, DVD projects, etc.
As a side note: My old laptop and my MacPro used the same username and password.

lhbilly wrote:
*My Mac Book Pro was stolen.* It had some Time Machine backups, but Time Machine had stopped working about 6 months before it was stolen. I had stopped using the USB drive since TM would never complete. (2 issues)
1. When I plugged in this USB backup disk to the Mac Pro just now, it asked me whether to use Time Machine with it. It told it no, ask me later so I could browse it first.
2. It looks like the old problem with Time Machine not backing up the stolen laptop shows up as a file called "2008-09-22.204132.inProgress". I am hoping that the backups previous to that one are okay. So far, browsing the files appears to me that my data is intact but perhaps spread across 40 folders.
So now, what should I do to retrieve the data I want?
start Migration Assistant located in /Application/Utilies. it has an option to migrate your data and applications from a TM backup. migrate what you want. note that users will be migrated to new users so to access your old home directory you'll have to log out and log in as the migrated user.
A. Copy the data files and pictures manually without Time Machine? How do I know I will get the latest versions?
B. Use Time Machine with this disk and somehow ask TM to restore to a different machine? (Is that even possible?) (Will it merge the files into my user folders?)
C. Use Migration Assistant?
D. Copy and paste the entire file structure to a directory someplace and pull off the data as I need it?
*End result: I want my external hard disk wiped ASAP, and in the meantime I want my data files preserved.*
The old MacBook Pro definitely did not have Snow Leopard but the MacPro does to which I want to copy the data. It probably had Leopard. But honestly my user data is not necessary, just primarily the data, pictures, DVD projects, etc.
As a side note: My old laptop and my MacPro used the same username and password.

Restoring Time Machine Backup on new SSD

Using STOCK HDD 500GB 5400RPM, Have a Time Machine backup on an external Seagate USB 3.0 drive, about 140GB used on my disk, if I restore to a 240GB SSD will it work smoothly or will there be problems due to the lower capacity on the 240GB SSD?

Andyl1980 wrote:
I am wondering if restoring the time machine backup that i currently have on to the new SSD after i have installed it by holding down the OPTION key at restart and selecting RESTORE FROM TIME MACHINE....
This is the best option if you want to keep everything you had on your old hard drive.
Another option you have is to reinstall OS X through OS X Recovery (hold Command and R keys while your Mac is starting up) and then, restore the backup during Setup Assistant, so you can choose what you want to restore. This may give you better performance, as OS X will be cleaner

Restoring time machine backup stuck at end

Hello!
I recently suffered a random filesystem failure and had to reinstall the OS. I was running 10.7, in fact, I turned on my MBP to install 10.7.1.
After a lengthy download, the installer prompted me to restore from a Time Machine backup, which I'm keeping since my last hardware HD failure. I chose to restore, and the installer detected my Time Capsule, loaded the backup, and started restoring.
I left it overnight and, come the following morning, the restore hadn't finished yet. Again, I left it while I was at work, and came back 8 hours later to find the screen in the exact same way I left it in the morning.
After some tests trying to restore the backup (including a failed back-to-Snow Leopard attempted recovery, couldn't connect to my TC), I figured I would reinstall Lion from scratch and use Console.app to check the progress using the system log when restoring using Migration Assistant.
My first surprise was when I tried to run Migration Assistant using the root user, which made Migration Assistant crash, so I had to create a second administrator user in order to restore my original administrator account.
After leaving it run its course, I started noticing that the Migration Assistant was trying to restart opendirectoryd, and that it was failing to start, citing error 71 "profile could not be found" (or opened, instead of found, I really don't remember and don't have the log here with me).
I then went into the terminal to check if the restored data was on disk, which it was, so, after a couple of attempts of launchd to restart opendirectoryd, I pulled the plug and shut the machine down cold (no shutdown process, just held the power button).
When the computer started up again (I have verbose boot mode on), it stalled at macx_swapon (again, or something like that, I don't remember), and didn't move in the whole hour and a half I let it sit there.
I tried booting single user mode, but the only thing I got to do was check if the restored data was there (which it was), and try to create my user (which I couldn't).
I've had success restoring backups from that Time Capsule but for another Mac.
Is there any way I can restore my computer back to the exact state of the Time Machine backup? FWIW, the TM backup is a data-only backup (i.e. doesn't have the OS with it), so a disk clone is not an option.
I really would like to avoid going the "fake manual restore" option of creating the same user, moving the files manually and so on, it's a PITA
Thanks in advance,
Nico

Sorry, can'thelp. But:
I trust TM only for rescuing individual files. I tried a full restoration of my Lion system, as a test, and everything was restored and seemed OK except half my Mail messages were missing. A few months ago, on OS 10.5.8, TM suddenly told me that it had deleted some files. The files deleted were all from Jan. 2010 to four weeks before! I know that it does this if the TM disc is getting full, but I had not created any large files in the preceding few hours. Also, the TM disc had loads of space left, yet when the message came, TM's GetInfo showed the disc nearly full!. I had to erase the disc and start again.
I don't find TM reliable. I make my backups in the form of bootable clones, scheduled every day in Carbon Copy Cloner.

How to restore time machine backup without disturbing already installed app

Hi!
My school recently reconfigured/reformatted my macbook and install the school image. Now it is filled with applications that the school help us installed. Now how do i restore the backup that my time machine backups last time? Migration assistant or what? I did not change my mac, it is just that my hard disk got reconfigured. How do i restore backup without disturbing the apps my school installs?
Please help thanks!
ALa.

alazahee wrote:
I did not change my mac, it is just that my hard disk got reconfigured.
I'm not sure what you mean by that. Is your user account still there?
If not, and if you have either Time Machine backups or a "clone" as backups, yes, use Migration Assistant. See [Using Migration Assistant|http://web.me.com/pondini/AppleTips/Migrate.html]. Note that you must be logged-on with a user account that's named differently from any of the accounts you want to transfer, or else be prepared to rename the duplicate.
If your backups aren't either Time Machine backups or a "clone," you'll have to drag and drop or restore using the app that made them.

Unable to restore time machine backup onto a new hard drive

I recently bought a new hard drive for my mid-2010 white Macbook. I have kept this computer regularly backed up with time machine, but just to be sure I made sure I hooked up my external hard drive prior to changing the hard drive and made sure it was fully backed up. I checked my exceptions and saw that my system files and applications were listed, so I removed them from the exceptions list and let it back up again (it only backed up a further 60MB though, so that made me a little uneasy).
I successfully switched over the hard drive and then plugged in my external hard drive so I could do a restore from Time Machine. My external hard drive has 3 partitions: 2 time machine backups for each of my computers, and one partition for storing files that also has an old copy of 10.6 on it.
When I booted the computer, I held option, then selected Macbook TM. When it came to the window with 4 options, including disk utility and restore from time machine backup, I selected restore from Time Machine backup. When I did so it said "No OS X Backups Were Found." Why wouldn't it have backups listed if I have been consistently backing it up? How else do I do a full system backup?
Also, how can I be sure that I'm restoring this backup onto the new hard drive? It didn't prompt me to select that drive at any point, and I want to make sure I'm not overwriting the middle partition on the backup drive (or anything else).

Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
You will find that Mountain Lion stores an invisible copy of the Recovery HD. You can boot from your Time Machine backup drive by restarting with OPTION boot:
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the "OPTION" key.
3. Release the key when the boot manager appears.
4. Select the disk icon for your Time Machine backup drive.
5. Click on the arrow button below the icon.
Your computer should boot into the Recovery HD. You will be presented with a main window of options. Select the option to restore from a Time Machine backup then click on the Continue button.

Need to reformat hard drive and restore Time Machine backup. What's the safest way to proceed?

I have a Mac desktop, purchased in 2007. We upgraded last year to Snow Leopard. It has been slow for a few days, and yesterday wouldn't go past the gray screen. Tried booting in recovery with no success, same for safe mode. Even tried fsck -fy. Eventually went to the Snow Leopard install disk and tried to repair disk, but got an "Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files" message. I've got Time Machine back ups on an external hard drive, but I want to make sure I do this right and don't make things worse. What steps do I need to take?

In most of the cases, that Disk Utility message means that the hard drive is damaged.
However, you can try to erase the disk and restore the Time Machine backup to see if it works. Follow these steps:
1. Insert the Snow Leopard DVD and press the C key while your Mac is starting.
2. Go to Utilities menu > Disk Utility, select Macintosh HD on the sidebar, go to Erase tab and erase the disk. If there's an error during this step, take the Mac to an Apple Store to get a new hard drive.
3. Close Disk Utility, go to Utilities menu, choose the option to restore a Time Machine backup and follow the steps.
If the computer is slow after doing this, take the Mac to an Apple Store as soon as you can

Restore Time Machine backup to newly-formatted Macintosh HD

I recently had to erase and re-format my internal start-up drive ("Macintosh HD," formatted GUID Partition Table) while troubleshooting. Turned out it was a failed main logic board, display and display LED backligh, so it was in the Apple Store for 2-3 weeks (long story). I have my Time Machine backups on an external 2TB USB drive, which has its own system, and is bootable. The newest Time Machine backup I have is from 11/13/11, but I thought I'd be safe and do a belt and braces backup, so I used Carbon Copy Cloner to backup Macintosh HD to a disk image. Somehow, I royally screwed it up, and I have THREE CCCloner backups on my 2TB drive (as well as the Time Machine backups). The three CCCloner backups are:
2011-10-26 (October 26) 15-52-21, total 14.18 GB (no System or Users folders)
2011-11-13 (November 13) 21-47-17, total 16.86 GB (System folder = 136.1 MB; Users folder = 1.54 GB)
2011-11-20 (November 20) 18-58-00, total 12.84 GB (System folder = 27.6 MB; Users folder = 1.05 GB)
It would seem I somehow invoked an incremental backup in CCCloner, and I do manual Time Machine backups.
The problem here is two-fold:
1. Between 11/13/11 (last Time Machine backup) and 11/20/11 (last CCCloner backup), I did a LOT of work, that I don't want to lose, but I don't know how to reconcile the three CCCloner backups. I've been in communication with the developer of CCC, but apparently he's taken the weekend off, and we have not yet worked out a way to cleanly reconcile the three CCCloner backups, which is what I would MOST like to do, as it contains the whole week's work between 11/13/11 and 11/20/11.
2. When I erased and reformatted my startup Macintosh HD, I, of course, severed any link between it and the Time Machine backups on the 2TB USB drive.
I suppose the quick and dirty way to get back to my Macintosh HD status is to do the following (found in an Apple Support Archived document):
"Once the drive has been formatted, quit Disk Utility to return to the installer. Go back to the "Utilities" menu again, and choose "Restore From a Time Machine Backup." Connect your Time Machine backup drive, and allow it to be scanned for valid backups. Choose your latest backup from the list provided, choose the destination for the restoration (the newly formatted "Macintosh HD"), then let it do its thing."
Then cherry-pick the new-to-11/20/11 items out of the CCCloner folders. Not an elegant solution, but I can't think of any other. I don't mind reformatting the Macintosh HD again, but then having to pick through the CCCloner dustbin is a big PITA
Anyone have any ideas?
Bart

<< Are the backups in a separate partition? If not, that may be a problem.
How about the CCC backups? >>
Nope to both.
<< That doesn't make sense. A CCC clone should contain the most recent version of everything (unless you omitted things). Where are you getting those sizes? >>
Individual folder "Get infos."
<< Yes, that's how you do a full system restore from your Time Machine backups. >>
Which I did last night, needing to move on with a number of projects.
<< You should be able to use the Finder to find files on the CCC backup from your home folder with Last Modified Dates since 11/13 (or, perhaps better, the free Find Any File app, which will let you pick any folder), and copy them. >>
<< May I ask why, with an iMac, you're doing all your backups manually, rather than letting at least some of them, especially Time Machine, run automatically? >>
The discussion below with Mike Bombich, of CCC, to which I replied just a couple minutes ago, may help explain some things (it will NOT explain my stupidity -- my only excuse is that I was pressed for time after a long and pointless search in all the wrong places for a very severe problem I was having, as you'll see). Why I didn't do a Time Machine backup just before I took my iMac in for service is a question I can only answer by saying "Duhhhh..."
Email from Mike Bombich and my reply between dotted lines
December 3, 2011 8:04:33 PM EST
Hi Bart:
<blockquote>Choosing the "2TB" drive as the "source" in CCCloner would give me the actual, bootable 2TB's system, which has few, if any, of the permissions, settings, etc. that were part of the the original Macintosh HD System files, which is what I'm trying to recover.</blockquote>
Unless you backed up another system to the 2TB volume since November 20, then that volume definitely has everything from your Macintosh HD as of Nov 20. You ran this task at that time:
2011-11-20 18:57:58 -0500
Task: Copying selected files (-psn_0_106522)
Source: Macintosh HD
Mount point: /
Destination: 2TB
Destination path: /Volumes/2TB
Settings
Archive deleted items, owner: bartonbrown
Archive modified items
Do not automatically prune archives
Which means that everything from your Macintosh HD volume was copied to the 2TB volume, and anything that was already on the 2TB volume was moved aside to the _CCC Archives folder. With the exception of the presence of the _CCC Archives folder, the 2TB volume was an *exact* replica of your Macintosh HD volume when that backup task finished on Nov 20.
I think this actually means that the restore process should be really easy. CCC won't copy the contents of the _CCC Archives folder (unless you choose it as a source folder explicitly), so if you choose the 2TB volume as the source and Macintosh HD as the destination, your Macintosh HD volume should be back to the state it was in on Nov 20. I don't see any need to exclude anything from the restore -- anything that wasn't on the Macintosh HD volume was moved to the _CCC Archives folder.
As an aside, you aren't going to find the bulk of your (most recent) Macintosh HD items in the _CCC Archives folder, that folder contains items that were on the 2TB volume when you started that backup task (which means there probably are some pretty important items in the _CCC Archives/2011-11-20 (November 20) 18-58-00 folder). You will find some items from Macintosh HD in there, but they're older versions of files from previous backups, and items that you have since deleted from Macintosh HD.
<blockquote>is there any way to back up onto an already bootable drive with CCCloner and STILL be able to choose the INDIVIDUAL CCC backup I want to restore the Macintosh HD drive.</blockquote>
Yes:
1. Create a new folder at the root level of the destination volume (e.g. "Macintosh HD 12-03-11")
2. Choose "Macintosh HD" from the Source menu
3. Choose "Choose a folder..." from the Destination menu and select the new folder that you created on the destination
When you want to restore from that, you'd boot from the 2TB volume, then in CCC choose "Choose a folder" from the Source menu and select that folder as the source.
You could also choose the "Create a new disk image" option, but I personally prefer backing up to a folder if the destination volume is formatted as HFS+.
Lastly, one thing to keep in mind with either of these solutions is that subsequent backups directly to the 2TB volume (with default settings) will cause the unique backup folder on the destination to be archived. You can avoid that by using CCC's "Protect root-level items on the destination" option. That's the setup I alluded to earlier, in the "I want to back up my startup disk and a data volume to the same backup disk" article.
Mike
To which I replied:
December 4, 2011 1:13:45 PM EST
Hi Mike --
"Unless you backed up another system to the 2TB volume since November 20, then that volume definitely has everything from your Macintosh HD as of Nov 20 ...and anything that was already on the 2TB volume was moved aside to the _CCC Archives folder. With the exception of the presence of the _CCC Archives folder, the 2TB volume was an *exact* replica of your Macintosh HD volume when that backup task finished on Nov 20.
Oddly enough, it wasn't: for one example, the Time Machine backups, which were NEVER on the Macintosh HD volume, are still on the 2TB backup volume, untouched, and so are literally thousands of files and folders I had backed up directly to the 2TB backup volume -- and thousands more I'm pretty sure weren't -- that DIDN'T end up in the _CCC Archives folder, but at the root level of the 2TB volume.
I wish I'd done a window grab of the 2TB backup volume's window before I did my 11/20/11 backup, and before I restored Macintosh HD from Time Machine, but I was so caught up in testing -- 60 hours worth, and all to no purpose -- for what a senior advisor fromr a company whose name is associated with the pomaceous fruit of the species M. domestica (genus Malus, family Rosaceae) was positive was a problem with third-party memory, just before we finally set up the FOURTH Malus domestica store appointment and I had to bundle the iMac up and drag it 40 miles to discover that the "Senior Advisor" was wrong and I was right -- for a change -- that it was a failed main logic board, well... I was working against time, I finally ran OUT of time, and all I can come up with to account for the current state of 2TB is that didn't do the CCCloner backup correctly. (I know that sentence is really poor grammatically, but when one has to tiptoe around landmines, circumlocution is better than circumambulation.
Last night, I had to restore Macintosh HD from Time Machine, which worked fine, except I now have literally hundreds of gigabytes of duplicate files (better than lost ones!) spread over 3 drives. The only recourse I can think of now is to use TidyUp! to winnow out the duplicates and try to understand better how to use CCCloner for backups, or surrender and use Time Machine.
Thanks for all your help. I have a couple other projects I wanted to finish up today, but I can see the day is going to be devoted to salvage operations...
I will just add this: The 2TB USB drive I use as a backup for Time Machine has been bootable since before I started using it as a backup, as is my 1TB USB drive, and all three -- Macintosh HD, 1TB, 2TB -- are at OS X 10.6.8. I also manually back up individual items to both 1TB and 2 TB drives.
Bottom line is, I obviously don't quite know how CCC works, and I thought I could back up -- at the last minute -- my internal, regular start-up drive, "Macintosh HD," to a Disk Image with CCC.
As for Time Machine, its constant and unfathomable-to-me backing up drove me nuts, so I turned it off, and used it to back up, manually, about once a week. Stupid? Yes.
Mea culpa
Bart

Restore Time Machine backup to Raid 0 (Striped set)?

I've been struggling with setting up my Mac mini (late 2012) server with a Striped RAID set and then restoring a Time Machine backup to the new RAID 0 volume. Here are the steps I have undertaken:
Bought a 3TB Airport Time Capsule and created a full restore of my existing Time Machine backups to it.
My Mac mini has dual 1TB hard drives. Pressed Command + R on bootup and entered recovery mode.
Using Disk Utility, I created a Striped RAID set by adding both my 1TB drives as slices to a new RAID set and clicked on Create.
After the RAID set was created, I exited Disk Utility.
Clicked on Restore from Time Machine Backup.
The process fails as it cannot create a Recovery Partition on a RAID set.
After much exploration, I think the problem can be resolved by attempting to Reinstall OS X on Step 5 and then attempting a Time Machine restore after the core OS is in place. Thoughts?

Additional Information
A Recovery partition cannot be created on RAID volumes. If your startup device is a RAID volume, you back up and reconfigure your computer to use a non-RAID boot volume. If needed, create a separate RAID volume for data which is not the target of the OS X installation. You can also create an external, bootable drive with a Recovery partition, as described above.
See this article if the following message appears during the install process:
"Install Failed: OS X could not be installed on your computer. OS X can't be installed on the disk because a recovery system can't be created. Visit www.apple.com/support/no-recovery to learn more"
From:
http://support.apple.com/kb/HT4649

Restore Time Machine backup on fresh Leopard install without disc.

I just got my iMac back from the Apple Store where they fitted a new hard drive with a fresh installation of Leopard. I've got an external drive with a Time Machine backup of my old HD, but don't know how to restore it. Unfortunately I forgot to ask them about it at the store and now realise that I don't have the Leopard install DVD with me, only the Tiger ones that came with the iMac (which obviously don't have the time machine option).
Is there any way to restore my data without the disc? It seems odd that they would install leopard after asking me if I had a time machine backup if I would just have to install it again.
Any help would be greatly appreciated as I'd love to get my Mac back to normal without having to have my Leopard disc sent to me.

You can use Migration Assistant, or re-create your user accounts from scratch and then selectively retrieve just what you need from your backups.

Can't restore Time Machine backup after iMAC (Lion) Refresh

I recently did a refresh of my iMAC with OSX Lion. I have been using time capsule to back up my iMAC as well as my Mac Mini for the last 6 months with what I perceived to be no issues.
When I got to the part in the MAC start up to restore from backup it couldn't seem to find the iMAC backup, only the Mac Mini backup so I skipped that part. I then tried to use Migration Assistant later and the same thing, I couldn't find it. I used finder to locate the Time Capsule and was able to find the backup, but when I double clicked on it said "Mac OS X can't repair the disk "Time Machine Backups". you can still open or copy files on the disk, but you can't save changes to the files on the disk. Back up the disk and reformat it as soon as you can".
Even though it said that it open a new finder window and I was able to find the backups and I proceed to copy of the files over. All seemed well until I opened iPhoto and it wouldn't open (just hung). I did a library restore/repair by clicking Option + Command when opening and after it ran iPhoto opened. When I browsed around though some recent pics that I uploaded either weren't there or corrupted and all my faces were gone.
I did a fresh install again and tried all over and the same thing happened. Any help on getting back my old backup? Seems to be corrupted or something, but I'm not sure.
See previous post before this... I was told to post my problem here - as I originally posted on the iPhoto forum before I realized I had a time machine / capsule problem.
https://discussions.apple.com/message/22248885?ac_cid=op123456#22248885
Help would be appreciated.

lonniebrunet wrote:
Hi there,
I had a look through and I tried to do option A5 - which is repair or verify disk. I dragged the sparebundle for the mackup to disk utility and after trying to do a repair I got the message "disk utility stopped repairing "Time Machine backups".
Does this mean that my backup is corrupted and useless for a restore with time machine?
Yes.
And that also means copying via the Finder may not get everything. Corrupted is corrupted.
Assuming you copied from the most recent backup, you might want to try copying just the iPhoto Library from an earlier one -- that might not be damaged. If you have room, put it somewhere else, like your desktop. Or if you have an external HD, that would work.

Restore time machine backups folder or iPhoto library to get album data?

Simply said, can I use Data Rescue or Disk Drill to restore old Time Machine backups instead of just the entire glob of files? I'm specifically looking for an iPhoto backup with albums and metadata, instead of just restoring the photos themselves. See below for more details.
I am an amateur or hobbyist photographer. Recently I noted that I have over 70,000 photos in iPhoto and it was really dragging. Kept telling myself to clean it up but never found the time. The other day, it said this version needs to be upgraded. Clicked ok, and when done, all my photos were gone. I have the iPhoto Library on an external and I could see that "it" was still there (almost 700gb) so I went to work trying to find a solution. Went through all of the rebuilding options with no luck and then got my stupid, "I got this" hat on. I said, no problem, I have Time Machine and I'll just restore the iPhoto Library from a few days ago when I know it was working fine. Deleted that "corrupted" library first, went to Time Machine and didn't realize that TM, at the VERY same time, must've run out of room and reset itself - it only had a brand new backup with the now-empty iPhoto Library in it. Luckily, I found all of my photos and have them safe on an external. I've also decided to backup to a cloud site (should've done a long time ago!!) and I'm researching which photo-management software will be best to catalog my pix going forward (likely Lightroom) as the Apple peeps said iPhoto isn't really built to handle that type of load.
I know I can just re-import my found photos but have I lost all of my album and event data forever? When I go to the iPhoto Library and Show Package Contents, it looks like all that data is still there. Will that just "reset" once I bring back my photos? Otherwise, I have run both Data Rescue and Disk Drill and can see all of the files - either those deleted from the external, or the deleted files that were being backed up by TM on my other external TM disk. However, the reconstructed files don't seem to include an "iPhoto Library" or a backups.backupdb by name and I'm afraid if I do all the work to restore either of those, I'm stuck in the same situation I have now - all of the photos but no album data. Went through these posts extensively and tried all of Pondini's recommendations too.
In the end, do I chalk this up as a learning experience and spend 2-3 days recreating albums and organizing my photos? Or, is there a way that I can get all that organizational data back - from the iPhoto package contents, restoring from the external, or restoring an old TM backup?

What I would do is restore the older version to a different location. Then first try the following on it:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database.
If that doesn't do the trick continue with
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.

Restore time machine backup

Similar Messages

Maybe you are looking for