Restore transfer rules after source system deletion

Hello,
due to several reasons I had to cut source system assignment.
The source system is now new connected to BW.
My transfer rules and datasources are lost.
Is there a programm, t-code, ....available to restore that stuff?
Points will be assigned.
Best regards.
Pascal

Hello,
Just go to transaction rsa13 right-click over your source system and choose "Restore"
Diogo.

Similar Messages

Field not delivered by source system - Deleted from rule

Dear Support,
While activating business content for example 0CRM_COMP,
I get the following error:
Field TYPE not delivered by source system -> Deleted from rule
Field CAMP_TYPE not delivered by source system -> Deleted from rule
Field CAMP_TYPETX not delivered by source system -> Deleted from rule
Similar errors for different fields appear.
My system config is
BI 7.0, SP14
BI Cont 703 Sp6
Any fix or solution will be suitable awarded.
Thanks and Regards
Raj Jain

HI Raj,
The business Content is not always consistent.
If you get messages like that, the best way to deal with them is to manually adjust the objects.
In this case it means that you will have to check the datasource. It may be that in R/3 you will have to "unhide" or add some fields to the datasource. (I cannot be sure as I cannot go into details).
Hope this helps,
Udo

How to restore iTunes library after operating system changed?

How to restore iTune library after operating system changed on the laptop? The syn is not working because it doesn't recognize the computer.

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek

How to find the existing START ROUTINEs in Transfer Rules in whole system ?

Hi all,
   How to find the existing Start Routines in Transfer Rules in BW System, please ?
   I know that we could find from the Transfer Rules.
   Is there any way to find instead of looking at Transfer Rules for <b>each</b> InfoSource?
Thanks,
Venkat.

Hi Venkat
You can find it in these tables
RSTRAN
RSUPDROUT
RSAROUT
RSAABAP
RSAABAPINV
Thanks
Tripple k

Activites after source system refresh

Hi all,
we made source system refresh recently.
When iam running INIT I am not able to get the data ,but in rsa3 data it is available
Now I am not able to retrive the data from source system for SD data sources like 2LIS_02_ITM.
Can any one tell me what type of activities i need to do after source system refresh for LO data sources.
Thank
Pruthvi

Hi Pruthvi,
As you mentioned about refresh, it would be a system other than Production system.
Delta Loads:
1. Whenever a refresh happens from the production, the delta pointers are disturbed.
2. You need to re initialize the delta pointer for the DS you mentioned.
3. If it is for the testing purpose of the Delta functionality, you may intialize the delta pointer 1st and then ask for postings of data in the ECC side.
4. Once the postings are done, you would see data in Delta Queue in RSA7 in source system.
5. Now run the Delta InfoPackage so as to fetch this data from the Delta Q of SS to the BW system.
Full Loads
1. If you are expecting a full load (Historical data), you need to first fill the Setup tables (in Background only) in the SS.
2. Once the Setup table fill job is completed in SS, you may execute a Full InfoPackage in order to get this full load.
Let me know if this helps..
-Bhushan.

Recover from source system deletion

Hi experts,
Our source system assignment to ECC was accidentally deleted which subsequently deleted the transfer stuctures/rules. Apart from restoring from backup, how can we recover the transfer rules? We could manually assign the source system again but there too many to be performed as well as we could not possibly recall all the routines, formulas and infoobject mapping.
Assistance is greatly appreciated.
Thanks!
ismail

Hi Arun,
Re-transport from QA is one of the options and our Basis is recommending that as well. Our options in order of preference is as follows:
1) Restore from backup
2) Re-transport from QA
3) Manually re-create
Thanks for your thoughts.
ismail

Source system deletion

Hi ,
We have two R/3 systems as Source systems for our BW.
Right now,both are in a postion to give data for lot of Data targets.
And now, we are planing to drop one source system.
So, kindly give me an idea about the steps to be followed
to make sure that there will be no problems after dropping
(like Metadata inconsistency...etc) .
Kindly provide few notes on this issuse also.
With rgds,
Anil Kumar Sharma .P

Hi Anil!
i think first you got to remove all the source system assignments for all the InfoSources with this particular source system by deleting transfer rules. one more thing is about logical system dependency of your data, i mean if there is any data which has 0logsys compounded and the data is loaded from this source system. then determine what you are going to do with this data and how you are going to refer it in future.
and once you are sure there is no link between this source system and BW. you can then delete this source system by justselecting delete in the context menu of this source system.

Source System Deletion Process in BW

I deleted the Sourse system (NQ2) in BW sandbox server (BSN) using RSA1 with right click option. During this deletion process, it deleted all the dependent objects. Now i connected BSN system to another Source System (NSB) and replicate and activate the datasource successfully.
Now when i checked the infosources in RSA1, say 2LIS_13_VDITM, no datasouce is assigned to this infosource. I can manullay assign the datasource.
is it the right approach to delete the source system and connect to another source system? Do i have to manually assign the source system to all inforsources?
Regards
Amarjit

Hi,
it wasn't necessary to delete your old source system. By doing so you have deleted all independant objects: transfer structures, transfer rules and most important, your PSA data which could be used for testing.
You could have kept your old source system to use it a template.
For instance it would have been possible to recreate all your TRules like for like from your old source system with a special transport by collecting all source system dependent Objects with a "save for system copy".
You would have saved a lot of work!
hope this helps...
Olivier.

Error while accessing the transfer rules after installation

I get the status " Idoc type in the source system is not available" when i try to access the transfer rules of delivery service ,0sd_c04 infocube. can anyone help me to fix the error.

Hi Hari,
How you installed Transfer rules, is it through BC.
Check the Data Structure in Info Source , whether all fileds are available or not.
First delete Transfer structure and again propose the transfer rules, activate it.
Let us know status.....
Reg
Pra

Error when creating transfer structure in source system

We have just had a copy of the ERP production system done and connected it to our existing QA system (done by our service providers) for a test go-live of our ERP upgrade.
Now I cannot activate the transfer rules as the transfer structure cannot be created in the source system.
I have checked the settings in table RSBASIDOC and they look okay, I can only assume that our wonderful basis people have done everything they should have but cannot be sure they've done it all correctly.
The sourcesystem is active, the RFC's are fine.
And help for a desperate man please. I've got to get this working in 1 day as basis need the system back to do an Oracle upgrade.

Hi Jonathan,
Try to replicate the DS once again and the run the program RS_TRANSTRU_ACTIVATE_ALL to activate your transfer structure. Hope it helps.
Thanks and Regards
Subray Hegde

Extraction failing after source system and client copy

Hi all,
We refreshed our source QA system with a copy of production. And basically tried to "restore" the connection from our BW QA system. Some of the datasources can be extracted from BW, others fail with an error of "No transfer structure is available for InfoSource 0COSTCENTER_ATTR in the source system".
Trying to do the same thing with RSA3 in the source system, works fine.
The strange thing is it works for some objects but not others.
here's what we did:
1. System copy from R3 Prod to R3 QA
2. Client copy with R3 QA client 300 -> 200
3. Restore connectivity in BW QA to the R3 QA system (Using RSA1 -> Source System -> Restore)
4. Now some objects can be extracted in BW, others fail as I mentioned above.
I have regenerated the transfer structures in BW and R3.
All of these objects that don't work seem to work in RSA3 on the R3 system but not in RSA1 on BW.
All the SAP documentation is geared to copying the R3 source system and then restoring connectivity between BW and R3. I don't think any of it involves copying the client in the R3 source system - which might be causing our problems.
We are using an SAP delivered PDF and note 886102 mainly for direction.
SAP PDF is "How to... System Copy in SAP Business Intelligence System Landscapes".
Does anyone have any ideas?
Thanks,
Kevin

Hi,
can you isolate somehow the kind of DataSource which works and those who don't?
Master data / transactional or client dependent and not, delta or full....
To which R/3 client is your BW connected? when you succeed loading the data, is it coming from the right client?
RSA3: do you run it specifying your BW client in the target sys field? does it make a difference if yes or if not?
Are your RFC connections and partner profiles all right?
Check some IDOCs sent by BW received in R/3 and vice-versa (RSSEND, RSINFO, RSRQST..). Load a hierarchy (via IDOC)... verify that your IDOC have the correct partner settings....
let us know
Olivier.
Message was edited by:
Olivier Cora

Source system deletion before copy or refresh of Non productive system

Hi
regarding the refresh of non prod BI system. . As part of refresh, we were asked to follow note 886102.
In this Scenario B3 matches to us. While doing the scond step. I have to delete source systems from RSA1 except my self system.
It is taking long time to delete source systems as each object of source system is prompting for request and consuming long time to complete thsi activity.
Please help me with a smarter method to delete the sourcesystems.
Thanks,
Haaris
Edited by: Hari Prasad Bolla on Jul 14, 2010 8:50 PM

Hi:
The primary source of information is the how to paper on this topic:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
YOu are correct, you can refreh the BI system without deleting the source system.
Thanks for any points you assign (after all, I wrote the paper!).
Best Regards -
Ron Silberstein
SAP

Copy routines written in transfer rules to other system

<Moderator Message: Even as a newbie you should be able to copy and paste or read here and write there>
Hi All,
In the datasource '0CO_OM_OPA_6' , in the transfer rules for infoobject 0PART_CCTR' , we have a ruotine written 'Fill Partner Cost Center from Partner Objects'.
Now I want to write the same routine for same infoobject in another test server for the same data source.
Can anybody please tell me how to go about from start as I am new in BW.
Regards,
Sushmita
Edited by: Siegfried Szameitat on Jun 8, 2009 3:47 PM

I think you should check the source system assignment in the transport connection. It might have directed to the old sytem.
Cheers
Chanda

Is there away to activate all Transfer Rules after a client copy at once?

Our Basis team recently created 2 new clients from copying our existing dev & qa systems they then changed the partner profiles and source systems to point to our new ecc clients but we now cant get anything to run without activating transfer rules trying to do this one at a time twice is going to take a long time is there anyway of doing this en masse?

Hi
you may have to use following FM too
RS_COMSTRU_ACTIVATE_ALL      Activate all inactive Communication Structures
RSAU_UPDR_REACTIVATE_ALL      Activate Update Rules
and then
RS_TRANSTRU_ACTIVATE_ALL      Activate Transfer Structure
Regards
Sudeep

DS-BW:Data load called from BW failed after Source System program_id change

Hi,
In my BW 7.0 instance I have Data Services 3.2 as source system.
Some time ago I have changed instance of Data Services I am connecting to - I just changed PROGRAM_ID in RFC connection parameters for that source system.
Since that time when I am trying to execute infopackage to call a job I am getting following error:
OCI call <OCISessionBegin> for connection <xxxxxxx> failed: <ORA-01017: inv
where <xxxxxx> is Oracle database connection name for Data Services instance I connected originally.
What can be reason for that?
Regards,
ak

In Data Services Server Manager on DS box there were configurations for job server I connected originally and for the other job server. After removing original config it works fine.
ak

Restore transfer rules after source system deletion

Similar Messages

Maybe you are looking for