Restore with configuration profiles?

If I have configuration profiles installed on my iPad, if I restore a backup of the iPad, will I still have them?

this was caused by the cert or the way it was exported.. not sure which.
follow this guide and all is well: http://www.expta.com/2010/02/how-to-securely-deploy-iphones-with.html

Similar Messages

Server app : random errors in configuration applied with configuration profile

When I verify the informations contained in the user configuration profile with both the profile manager and textmate everything is ok. When i installs the configuration profile on a computer there are errors in the configuration of Mail app the email address is configured as follows: [email protected] instead of: [email protected] and username is: [email protected] instead of : user1 . Both server and client computers are on running mac os x 10.8.
thanks for the help !

When I verify the informations contained in the user configuration profile with both the profile manager and textmate everything is ok. When i installs the configuration profile on a computer there are errors in the configuration of Mail app the email address is configured as follows: [email protected] instead of: [email protected] and username is: [email protected] instead of : user1 . Both server and client computers are on running mac os x 10.8.
thanks for the help !

Siri not working with configuration profile

I am a Systems Administrator and we are using the Apple Configuration Utility to put profiles on our phones. We have our Wireless network, pass code and Exchange setup in the profile and ALLOW Siri and Siri while locked as well as all applications, TV, Downloads, Facetime etc. per our HR policy.
The iPhone 5's will not work with Siri when locked or unlocked even though it is allowed in the profile. The iPhone 4s phones do not have this problem. The only way we have been able to get Siri working on the iPhone 5's is to remove the profile entirely.
Has anyone else seen this issue? If so, were you able to resolve.
The OS on all of our iPhones is 6.1.3 which to my knowledge is the latest and greatest. Any advice or thoughts are welcome.
Thanks

So today I read on another post to close all the apps running in the background by double tapping the home button and deleting them. I did this and now Siri is working so it appears that one of the apps was intefering with Siri. Before that I tried disabling Siri and restarting and enabling again, changing the language to another English one, restarting the Network, every other tip I read except resetting all settings. This one closing all open apps working in the background was what did the trick.
I wish that there would be one central place where we could go and get the tips rather than to have to search through multiple postings. Something Apple could do to be proactive about helping us out. All in all I do love my iPhone 4s but that experience with Siri was unexpected. I should have read more before buying the iPhone 4s so at least I would have been prepared.

Problems with configuration profiles disappearing

So, I have inherited the task of joining our Macs to our Active Directory domain. To facilitate, and to get a handle on local profile vs network profile, I have joined the Macs in question to the domain, reassigned folder/file permissions to the network user, and all is relatively well.
However, most of our Mac users tend to use wireless, which can be difficult on network login at boot (granted the way Mac handles wifi connections at startup.) To handle *that*, I have used Apple Configurator to create a wifi profile that tells the Mac to load wifi at startup, and connect to the WPA2 WLAN we have for internal users with the supplied credentials and certificate. This profile works pretty well.
What I am running into is the following: On one Mac, I have found that if it it sleeps, it decides to have issues reconnecting to the wifi - this is usually cleared by either a reboot or preventing sleep (not the best options but they work). On several, I have this issue, which is more troubling:
The wireless profile just disappears. Users are unable to connect to wifi, and when looking in the Profiles, it's (now) completely blank. So, it would appear that something is removing/deleting the profile I have installed. This does *not* happen at boot/reboot, but seems to be (AFAICS) at random.
And there you have it – ever seen this?
What logs should I pull to see where/when/why this happens? Note: I have had this happen on one Mac more than once, and on another, only once thus far. The multiple incidents are on a Mac running 10.8.6 and the single incident is on one running 10.9.2.
Profile was created using Apple Configurator 1.5

SolidWood --
A cert is indeed used, as this is the WPA2 Enterprise WiFi being used. The certificate in question is bundled into the Configurator package that gets pushed onto the Macs in question, and does indeed appear in the Keychain Access on the client machines. Additionally, the cert has not expired (expiration is 2017) - if indeed expired, my problems would be *much* larger than these Macs, as nearly every machine in the company uses the corp WiFi.
It's puzzling, as in one machine's case, I will push the config, it will work for days, and then without warning, the mobileconfig I added into Profiles is just...gone. I add it back, and all is well - but this is hardly an ideal situation.
I appreciate the response! I am just wondering now...where and which logs would, if at all, show me the drop/removal of the profile?

Configuration Profile Custom Settings in Profile Manager

Hi All,
I'm a newbie when it comes to OS X configuration profiles. Does anyone have any resources on customizing or editing configuration profiles?
I've been playing around with Profile Manager for a few days and see the "Custom Settings" tab. I'm curious what kind of things I can customize here. Being a newbie I don't know where to start.... If anyone has any documentation or link to online resource or book recommendation on editing mobileconfig files or creating custom settings with payloads in Profile Manager I'd really appreciate it!! There are a lot of tweeks that I'd like to set on our computers and I'd like to see if I can do these tweeks with configuration profiles.
Thanks in advance for your help!
~Joe

Thanks for posting Brian You're 100% right. It's been noted and the revised article should be published shortly.

Ibooks - Problem with configuration of my iPhone. Please Restore?

I had bought a book on my iPad today .. and I sync'd it with my iPhone so I can read it on my iPhone as well .. but when I open the book it says " There is a problem with the configuration of your iPhone. Please restore with iTunes and reinstall iBooks."
anybody know what is going on?

Hi Kern,
It sounds like you jailbroke you iPhone. Try restoring it and setting it up as a new device.
This article discusses that error.
WTH.

Configuration Profile for Apple Devices with ISE

Hi,
is there any possibility to put configuration profiles on apple device with the ise? I need to disable the dataroaming function in forgein countries for ipads.
Best regards
Felix

Nice. Only trouble there seems to be multiple entry for same mac address there for same resource id.
So when I try to get them as substring i get multiple copies of same mac address.
But looks like this will work as solution to this problem.
So far I was doing it this way (And i am sure there is clearer way to do it.)
SUBSTRING((SELECT ',' + CAST(t2.MACAddress0 AS VARCHAR(40))
            FROM (SELECT DISTINCT ResourceID, MACAddress0 FROM v_GS_NETWORK_ADAPTER) t2
            WHERE t2.ResourceID = ResourceID
            ORDER BY t2.ResourceID, t2.MACAddress0
            FOR XML PATH ('')
        ), 2, 100) [MACAddresses]

IOS 5.1 or iPhone Configuration Profile 3.5 for Windows has not fixed the issue with apply Proxy Settings

iOS 5.1 or iPhone Configuration Profile 3.5 for Windows has not fixed the issue with apply Proxy Settings via a Configuration Profile. Has anyone else got the same issue? Are Mac users got this issue?

This seems to be working for me now but will keep monitoring it the next couple of times I use it to make sure its not a one time thing

MMS fails on iPhone 5 with AT&T when APN configuration profile installed

Installing a configuration profile containing APN information to the new AT&T iPhone 5 results in breaking the capability to send or receive MMS messages through the Messages app on the device. This is for MMS (Multimedia Messaging) and not iMessage (that works fine).
This happens regardless whether the device is on LTE mode or on 3G mode.
The configuration profile we are using has APN information and proxy settings for this APN as well (proxy host and port information). However, the problem happens even if the profile contains just APN without any proxy settings info.
This happens on iPhone 5 ONLY (commercially available through AT&T). This is important to note because iPhone 4S with iOS 6 DOES NOT HAVE THIS PROBLEM.
This problem happened last year too when iPhone4S was introduced. But it was fixed later.

yes, sir, without the profile, everyhting is fine on the 5, that is MMS and VVM.
This is really what confuses us over here too. We thought it was the proxy itself. So we took it out and created a very simple profile with just APN, no proxy, nothing else. MMS and VVM would still not work on the iphone5. But data (browser and apps) still worked fine.
Are you aware of the iOS 6 issue I also brought up in this forum, where removing an APN/proxy config profile actually leaves the proxy settings behind (even though the profile itself is removed)?
Well, if I remove my APN/proxy config profile on the iphone 5, the proxy settings are still there, as I can see browser and apps data still going through my proxy (even though my profile is gone). But check this out: MMS and VVM now work (despite the apparent presence of the proxy)!! This is actually our workaround at the moment, using another problem to our advantage.
I think all this shows something is wrong here.

MDM apps in folders with Configurator restore

I am wondering if anyone has pushed iPad apps with an MDM and tried to put them in folders on the iPads? I have a master iPad setup with all of the apps pushed from our MDM(Casper) in folders. I backed that up in supervision mode in Configurator and restored that backup to the rest of the iPads. Then I pushed out the apps to the iPads using Casper and they didn't go into folders. I tried it the other way around where I pushed the apps and then restored the backup and it creates the folders but doesn't install all of the apps or stalls out on them. Has anyone been successful with this? Thanks!

Hi Jon,
I use Casper too and I have not been successful in getting apps into folders when installing apps via MDM. When I first started using Casper, I tried the same thing you did (master iPad with apps that were installed from Casper, run Supervsied backup, restore backup to new iPads, try installing apps from Casper) and had the same results you did. From everyone I've talked to, its seems that the only way to maintain folders with apps is with Configurator and with iTunes (using Configurator backups and iTunes backups respectively). My testing has found this to be true.
I've since separated from the thought of using folders on our iPads in our school district. We now teach the kids to use the iPad's Search feature to find apps. This also teaches the kids that Search can find so much more than just apps. So while folders are nice to keep apps organized, teaching the kids about Search can be more helpful in the long run. Also, folders can get altered by the kids once you give them the iPads. Using Search they can find the app even if they inadvertently moved the app out of the folder. Teaching Search has been a good thing for us
Hope this helps!!
~Joe

HT5439 Why does support *** u me this statement gets the problem solved ? Use Apple Configurator* to deploy a configuration profile with a Wi-Fi payload that contains the proxy configuration.

Why does apple support help *** u me this opening statement help anyone without the knowledge to undertand what to do?
Use Apple Configurator* to deploy a configuration profile with a Wi-Fi payload that contains the proxy configuration.

Post in your native language, nothing posted so far makes any logical sense.

Server with same Profile cannot access same networking

Hi,
I have a lab running 1 x Nexus 5010, 2 x FIC 6120'XP's, UCS 5108 and 2 x B200 M2 Blades. I have configured everything per flexpod guidelines (except I have only 1 Nexus). I boot from SAN over Fibre and zoning everything is working 100% My firmware is 2.1(1f)
Question:
Assinged to each blade is 2 vNICs connected to FabricA and FabricB (FabricA = port-channel from FICA to Nexus and FabricB = port-channel from FICB to Nexus - Nexus has 2 different port-channels conf for each link to each FIC)
After I install VMware, I tag vlan 10 (management vlan) for the management traffic of each VMware node. The funny thing is when I ping server 2, iget a response but not from server 1. Both are configured using the same service profile. If I ping server 1 from server 2, I get a response. This leads me to believe that for some reason the traffic is not leaving the FIC from server 1, but it is when using server 2. I have attached screenshots of both servers vifpaths.
Can someone please help urgently as this is driving me crazy as I do not know what the hell is going on.
Cheers

Hello
Hope this solution will help.
Just found my notes on deleting the users profile:
"Deleted Profile logs back in with temporary profile.
This problem occurs if the current user's profile was accidentally deleted from the system.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry
1. Log on to the system by using an administrative user account other than the user account that is experiencing the problem.
2. Back up all data in the current user's profile folder if the profile folder still exists, and then delete the profile folder. By default, the profile resides in the following location:
%SystemDrive%\Users\UserName
3. Click Start, type regedit in the Start Search box, and then press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
4.Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
5.Under the ProfileList subkey, delete the subkey that is named SID.bak.
Note SID is a placeholder for the security identifier (SID) of the user account that is experiencing the problem. The SID.bak subkey should contain a ProfileImagePath registry entry that points to the original profile folder of the user account that is experiencing the problem.
6. Exit Registry Editor.
7. Log off the system.
8. Log on to the system again."
& for more information kindly check the below link too :- http://community.spiceworks.com/topic/187995-network-pc-cannot-access-1-specific-server .
Regards
keshav

How to remove Apple Configurator Profile - iPad

On my iPad a supervision profile has been installed using Apple Configurator. Is there a way to remove this profile without restoring.
When I tried syncing my iPad to my computer a message came up, notifying my that my 'iPad is supervised with another computer and cannot be used with this computer.'
I belive this has occurred because of this supervison profile and I can't seem to remove this profile.
I don't have access to both the Apple Configurator application that was used to create it and the computer that it is supervised with.
I have tried recovery mode and a few other basic ways that could remove this.
I need a way to remove this profile without removing all my data or accessing the Apple Configurator itself.
Max.

Unfortunately, if you don't have access to the computer that the iPad was supervised with you won't be able to unsupervise it without resetting the device (and thus losing all of the apps and data).
The idea behind Supervising is that control lies with the person managing the devices (teacher, I.T. staff, etc), not the end user. In Supervision mode, the person managing the devices is "king" and has control of installing apps, configuration profiles, etc. When an iPad is initially Supervised, it is wiped clean of previous data, apps, and settings. This prevents a personal device from being supervised by another person without their knowledge. Once Supervised, it is no longer a "personal" device…it is managed. The same sort of thing happens when you unsupervise a supervised device…it deletes everything so that the manager is no longer "king" and the user regains all control by starting with a clean iPad without data, apps, or controlled settings.
You may want to try and manually back up as much as you can to services like Dropbox before resetting the device.
I know this is not the answer you want to hear, but I hope it helps understand why it is what it is. Good luck.
~Joe

Access switch lost contact with nac profiler

hi all,
We have implement HA for nac profiler using version 3.1.1_18 .My problem is we need manually update for all access switch to connected with nac profiler server and then endpoint detect if i'm don't click button update for all access switch not see the new endpoint .On the acceess switch we configure SNMP cisconac RO and cisconac1 RW .For the SNMP is it needed manually update or automatic if new endpoint connect to the network ?here i'm attach on the my configuration SNMP ..

Hi Larry,
I had the same problem with iTune 10.6.5, and one cannot uninstall it. I was on the phone with Apple wireless support. The solution is to upgrae firmware on the Express, whihc cannot be doen with the latest airport utilities. HOwever, Apple re-posted Airport utility 5.6 for lion, which will then allow you to upgrade the firmware on older Aplle Express Units. This in turn will allow iTune 10.6 to communicate properly wit the Express. Doing so restored my connection to the speakesr without any further issues.
Give it a try...
the utility i sloctaed at:
http://support.apple.com/kb/DL1482?viewlocale=en_US&locale=en_US
Best,
rk007

Error while saving a smartform in pdf with action profile in service order

Hi experts,
I have a problem in saving a smartform which is converted in pdf.
WHat i m doing is.
The action profile is configured with new Z class and Z method. CL_DOC_PROCESSING_CRM_ORDER and CRM_SRVORDER_EXEC_SMART_FORM.
But when i click the button in the Order, i m able to save the pdf in local drive, but an error is coming in the Order page(at the bottom) "Action could not be executed successfully".
The action has been setup with "Printonly" and "Smartforms print" in customization.
I have a dount whether, this action Printonly is only to print the smartform ??? Or can we use just to save the smartform in pdf.
But when i remove the pdf conversion and save dialog and try to print it directly, Its printing the smartform. No errors are coming.
But guys, please help me on this. I have tried all the tricks i know.
I just want to save a smartform in pdf with action profile configured.
Thanks in advance.
<REMOVED BY MODERATOR>
KK
Edited by: Alvaro Tejada Galindo on Mar 19, 2008 4:26 PM

Hi;
Did you checked
Queries Error With FRM-92101 In Many NLS Forms [ID 443922.1] << seems similar error like yours
Forms FRM-92050, FRM-92100, FRM-92101, FRM-92102 Reference Guide [ID 444690.1]
If its not help please enable trace
How To Perform System Tracing For All Forms Runtime Processes? [ID 400144.1]
Regard
Helios

Restore with configuration profiles?

Similar Messages

Maybe you are looking for