Restored bookmarks not showing up on menu

My bookmarks suddenly got erased by themselves and i could no longer add any bookmarks, i reinstalled firefox and connected it to my sync but the bookmarks do not show up. I have tried manually restoring them from a json file and nothing shows up. I have tried it using firefox 17, 17.0.1 and 16.0.2 Any ideas?

Are you using Firefox Sync or another extension to sync bookmarks?
*https://support.mozilla.org/kb/what-firefox-sync
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Similar Messages

  • Air Play icon not showing up in menu bar. How do I fix this?

    Air Play icon not showing up in menu bar. How do I fix this?

    What year is the MacBook Pro from?
    AirPlay: iOS and Mac

  • Netflix is not showing up in menu

    Netflix is not showing up in menu, any suggestions?

    I am having the same problem!  Where are you located?  I live in Japan but stream Netflix using an US IP address.  I bought a tv and apple tv just to stream Netflix.  It's so frustrating!

  • TS3798 My Apple TV Does NOT show the Internet menu option. Has all the other options but the Internet. I am connected to the Internet as I can  Rent, Buy ,etc..movies from the Apple Store...

    I have a first Genreation iPAD and just a new Apple TV, 3rd Generation. The Apple TV does not show the Internet menu option after booting up.

    There isn't one.
    AppleTV3 has icons for all the internet features.

  • I have a imac mid 2011 model, why can't i connect to airplay?  And the airplay icon does not show in the menu.

    I have a imac mid 2011 model, why can't i connect to airplay?  And the airplay icon does not show in the menu.

    Hi there cjperido,
    You may find the troubleshooting steps in the article below helpful.
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts5209
    -Griff W. 

  • Hard disk not detected during booting or also it does not show in boot menu.

    hard disk not detected during booting or also it does not show in boot menu please tell

    you may have a failed hard drive or bad cables, i would check first to see if the hard drive is powering on. if it doesn't try a different power connection, and if it still doesn't start spinning i would say that it is bad and get a new hard drive. If
    it does start spinning and just isn't being recognized, try a different sata port if you have the option or a different sata cable all together.

  • Bookmarks not showing in menu dropdown but still are in url line. When doing the restore feature, it says 807 items but nothing shows up still after.

    Earlier today my bookmarks were there. Later tonight, not there.
    I've tried the whole restore bookmarks process, I've copied the folder and deleted the places file thing. None of that has worked.
    What's weird is if I type something in in the URL box that I know is in my bookmarks, it will show up like it's in the history. But nothing shows up in my bookmarks folder at all.
    I need some help on this as I've tried almost every way I've read and nothing has brought them up. And like I said in the title, I have over 800 bookmarks and a lot of them are work related.

    Another user had a similar problem a couple of days ago, but was fortunate to have a backup of places.sqlite to restore. See: [https://support.mozilla.org/en-US/questions/981306 Invisible bookmarks].
    When you deleted places.sqlite file and Firefox regenerated your database, it presumably used the most recent backup. I wonder whether the most recent backup contains the same mysterious corruption. Do you want to try recovering from the next older one?
    In your profile folder, after exiting Firefox, open the bookmarkbackups folder and move the most recent JSON backup file(s), anything from today, to a safe location (e.g., your Documents folder). Then go back up a level and rename places.sqlite to something like places.wtf.
    ''Note: if Windows does not display these file extensions, turn on viewing of file extensions to ensure that you can work with similarly named files accurately. This article has the steps: [http://support.microsoft.com/kb/865219].''
    When you start Firefox, it should rebuild the places database again, this time with that older backup. Any difference?

  • Canon IJ Network Scanning Utility not showing up in Menu bar

    Hi, I recently performed an erase and install of my Mac. I then used Migration Assistant to restore my data. I have a Canon MP620 Wireless Printer. I noticed that the Canon IJ Network Scanning Utility is not showing up in the menu bar. How do I get it to show up again?
    Message was edited by: Stuart Lawrence

    When installed, the Canon IJ Network Scan Utility is located HD > Library > Printers > Canon > BJPrinters > Utilities. Double click the utility and the icon will appear on the menubar. If you want the utility to start on login, then you can add it to your Login items, located in System Preferences > Accounts.

  • Application list not showing in GoTo menu in 5130

    When I try to add applications to the GoTo menu in 5130-c2, the application list (from Select Options) is not showing. Instead it hangs and I need to switch off my phone and restart. My software version is latest. Please help me solve this. I have installed applications both on phone and on memory card.

    Hi,
    dont dispaly data directly,after  creating the both objects for containers and code for fcat and lay out ,
    then execute the report , if you able tos see small grid in corner, u can dispaly internal table by using settable_for_first_display.
    Thanks
    Srini

  • Pic not showing up in Menu (Black and Gray 3 photos across)

    I created a menu and it was all okay when I went back into it to burn, I preview it first and the 3 photos across arn't showing so I droped them in again and it's still not working.
    What am I doing wrong or what did I do to make them not show. Can anyone help? I need this get this DVD done tonight
    Thank you
    Alicia

    GOT IT!!!!
    I del. the com.apple.iDVD.plist....
    Thanks to others posts I've read....

  • Non-button text not showing up in menu

    Is it normal for text in a Blu-ray menu that is not a button to not show up in the menu once it is on a disc or disc image? This is the last issue I am having.
    I have some text on a menu that is just text. I have had plain text in the past work perfectly, but this time around Encore isn't rendering it. In the past though, my motion menu footage was in compliant m4v format, and this time it's mp4 so that Encore would transcode it. Using m4v was causing red frames to show up in the footage.
    Is there a way for me to fix this easily, either in Encore of Photoshop?

    I feel really slow...
    The only background in a multipage menu is the background in page 0.
    When you add anything to the page 1 or 2 groups, it can only be a button.
    So yes, the workaround to getting text that only shows on a single page is to put it in a button.
    You told us everything we needed in the original post, except, of course, that it was a multipage - but the symptom made that an easy guess. Sorry a little slow on getting there!

  • Scripts will not show up in menu

    Hello
    I just recently started using Photoshop CS5. In the past versions you would be able to drop a java script in the Adobe/Presets/Scripts folder and the next time you launched photoshop the script would then be listed under File > Scripts. It now seems that in CS5 that is not the case in both the windows version and the mac version. I really need the script to show up in the menu and I do know the script works in CS5 because if I select File > Scripts > Browse it does run without any issues. The next thing I tried is duplicating a default script that DOES show up in the menu and renaming it and when I launch Photoshop that duplicated script does not show up in the menu. What changed because this was a non-issue in the previous CS versions.  Help needed because this is a very important part of my workflow.
    Thanks in advance

    I use a PC an old one therefore 32 Bit CS5 I do not have that Problem.  In fact I even install my Photoshop Scripts outside of the Adobe's Photoshop Tree.  I'm able to do that by placing a link/shortcut to My Photoshop Script tree into Photoshop's Presets\Scripts. I do this because I use many of my script in actions and when you do that the full script file path is recorded into the action step. So I do not want my scripts path to change with each version of Photoshop My Photoshop scripts stay put. Using HARVEST_EXCEPTION_ZSTRING I have been able to Group them by script type In Photoshop's menu File>Scripts>.... and have my Photoshop Plug-in script show up in Photoshop menu File>Automate>... In fact I think it works better in CS5 for CS3 would only list some number of scripts then stop listing the other scripts  you had to use the browse item to get to the. 
    Here are two examples
    <javascriptresource>
    <about>$$$/JavaScripts/orient/About=JJMack's Orient^r^rCopyright 2009 Mouseprints.^r^rRun twice script utility for action.^rNOTE:Don't play other actions between runs!^rFirst Run records orintation and rotate Protrait to Landscape^rSecond Run removes orintation recorded and rotates Portrats back.</about>
    <category>JJMack's Action Run Twice Utility</category>
    </javascriptresource>
    // BEGIN__HARVEST_EXCEPTION_ZSTRING
    <javascriptresource>
    <name>$$$/JavaScripts/AspectRatioSelection/Name=Aspect Ratio Selection...</name>
    <about>$$$/JavaScripts/AspectRatioSelection/About=Aspect Ratio Selection Plug-in Version 0.0 By JJmack a Hacker use at your own risk Quality forget about it.</about>
    <menu>automate</menu>
    <category>JJMack's</category>
    <enableinfo>true</enableinfo>
    <eventid>3caa3434-cb67-11d1-bc43-0060b0a13dc5</eventid>
    <terminology><![CDATA[<< /Version 1
                             /Events <<
                              /3caa3434-cb67-11d1-bc43-0060b0a13dc5 [($$$/AdobePlugin/AspectRatioSelection/Name=Aspect Ratio Selection) /imageReference <<
                                   /width [($$$/AdobePlugin/AspectRatioSelection/Width=width) /pixelsUnit]
                                   /height [($$$/AdobePlugin/AspectRatioSelection/Height=height) /pixelsUnit]
                                   /flagCENTER [($$$/AdobePlugin/AspectRatioSelection/Center=center) /boolean]
                                   /flagBORDER  [($$$/AdobePlugin/AspectRatioSelection/Border=border) /boolean]
                                   /flagRECTANGLE [($$$/AdobePlugin/AspectRatioSelection/Rectangle=rectangle) /boolean]
                                   /flagELLIPSE  [($$$/AdobePlugin/AspectRatioSelection/Ellipse=ellipse) /boolean]
                                   /flagREPLACE [($$$/AdobePlugin/AspectRatioSelection/Replace=replace) /boolean]
                                   /flagADD [($$$/AdobePlugin/AspectRatioSelection/add=add) /boolean]
                                   /flagSUBTRACT [($$$/AdobePlugin/AspectRatioSelection/Subtract=subtract) /boolean]
                                   /flagINTERSECT [($$$/AdobePlugin/AspectRatioSelection/Intersect=intersect) /boolean]
                                   /feather [($$$/AdobePlugin/AspectRatioSelection/Feather=feather) /pixelsUnit]
                                   /flagANTIALIAS [($$$/AdobePlugin/AspectRatioSelection/anti-alias=anti-alias) /boolean]
                              >>]
                             >>
                          >> ]]></terminology>
    </javascriptresource>
    // END__HARVEST_EXCEPTION_ZSTRING

  • All PDF Presets Not Showing Up in Menu

    There are 14 total PDF presets between both Settings folders on my computer (Mac 10.8.5). Only 10 of them are showing in the Adobe PDF Presets menu item. Does anyone know why all of them wouldn't be showing up?
    Thanks,
    Lloyd

    I'm in InDesign CC 2014. All of the missing ones came with InDesign, as far as I know…they all have the same creation dates. I created two and they ARE showing up. And it's not consistent; some from each folder are showing up, and some from each folder are not showing up. A couple of them are named PDFA1b as opposed to PDFX1a (etc.). Also, two that aren't showing up have JPN in the file name (right before the period) but one that has JPN in the file name IS showing up. It's not a huge deal, I was just curious why some would and some wouldn't.Thanks!

  • Bookmarks not showing up in Printed Documentation

    Hello all. I'm evaluating Robohelp 7 and all seems to be
    working ok except for printing the documentation to PDF, (or word
    for that matter) but that isn't so much of a concern at this point.
    When I get to the second screen of the wizard to organize the
    chapter layout and choose to do this from the TOC, some of my
    bookmarks do not show but some do. I can't see what a difference to
    determine why some do and some do not show up there.
    Anyone have any suggestions. I would be grateful!

    Sorry for the confusion what I meant is of the bookmarks that
    aren't showing up some of them have spaces (not actual spaces), and
    some have none.
    Upon looking further at the TOC I did notice a difference in
    the bookmarks that are showing up and the ones that are not. The
    ones that are showing have a # symbol rather than the underscore. I
    tried changing one of the ones that isn't showing but it didn't do
    anything.

  • Officejet 6600 fax not showing up in menu using windows 7 64

    I using windows 7 64 I reinstalled hp software for Officejet 6600 all in one, but my faxing software will not show up in the menu . I have removed all drivers related to Officejet 6600 several times same problem every time . The fax menu was there before all hardware is still the same.

    Hi G2123,
    I understand you are no longer able to fax from your computer as the Officejet 6600 fax is not showing up. I suggest starting with the HP Print and Scan Doctor.
     The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
    Connectivity :
     USB: Verifies that the USB connection from your computer to the HP product is working correctly.
    Network: Verifies that the network connection between your computer and your network is working correctly.
    Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
    Driver Check : Checks for missing or corrupt driver files.
    Device Manager : Checks for problems in Device Manager that would prevent printing.
    Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
    Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
    Port Match : Checks the port settings for the HP product.
    Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
    Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
    Print Settings : Checks and adjusts the print quality settings.
    Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
    Scan Tests : Checks the scan mechanism, drivers, and registry entries.
    You can also click the Printer menu to find the additional features such as cleaning printheads, aligning printheads, checking ink levels, and viewing advanced printer data for your selected printer.
    Source: Try the HP Print and Scan Doctor for Windows
    Click here to download and run the utility > HP Print and Scan Doctor
    Please let me know if this resolves the issue, thanks.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

Maybe you are looking for

  • I can't click on a link in a web site opened in Firefox for Android

    This is happening on a caches web app. I can not click on a link in my of my pages. However if I press long on it and select "Open in new tab" it opens successfully. what is the issue?!

  • I wanna close my user account, how to do it?

    Hi, I wanna close this icloud.com user account, which I'm using right now. So, how to do it? Because i can't find 'delete account' button. Because, i don't need 2 accounts.., (still using .me account after that.)

  • Flash Nightmares. . .Access denied

    This all started rather simple. . . I visit a site of a client of mine that has a flash video that was not working on my Safari but did work on Firefox. It was suggested I try to reinstall the latest Flash Player. So I did and I got the "Access Denie

  • ACS External DB - Windows WORKGROUB

    Hi, Is it possible to integrate ACS 4.0 SE with external Windows NT WORKGROUB? Regards, Haitham

  • Leopard Stopped Any Printing!

    Hi All .. I just uprgraded to Leopard last night. My Airport printer stopped working. In the window to add printers ...all buttons are grey-ed out. Very frustrating! Seems to be no way to look for my printer now. It was working great in Tiger. Any he