Restored Ipod Nano 1st gen. and nike + icons do not appear in itunes 7.0.2

I have a ipod nano 1st gen. I recently purchased the nike+ reciever and shoes and they worked great. I had not problems installing the latest version of ipod software version 1.3.
On my latest run I got soaked and the nike+ receiver stopped working after the rain. Waited a day until it dried out and reconnected it to my ipod and it did not recognized the receiver.
I reset my ipod and it still did not recognized the receiver.
I restored my ipod and it ereased the nike+ icons from my ipod and itunes. I updated my windows software and reinstalled itunes 7.0.2 in my computer and still the nike+ icons do not appear in my itunes and the updates indicate that I have the lastest version of the itunes and ipod software.
What else can I do to reinstall the nike+ software in my ipod and itunes?

Hi
this is actually the nike plus forum for the 2nd gen ipod nanos that use nikeplus. You would getter a better response int he correct forum for 1st gen ipods at the link below.
http://discussions.apple.com/forum.jspa?forumID=1123
http://discussions.apple.com/forum.jspa?forumID=818
Good luck
GFF:)

Similar Messages

  • When i connect my ipod nano 2nd gen, it charges but does not appear in windows or itunes.  I tried the reset but it didn't work.  how can i fix this?

    I bough a 4g Ipod nano 2nd gen for my cousins birthday.  When i plug it into my computer it charges but does not show up in windows or itunes.  I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting.  Could the wire have something to do with it or is there a bigger problem here?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Problem restoring iPod nano 1st gen.

    One day I just playing music as usual, and suddenly, my 1st gen just restart itself with an "use itunes to restore" message on it. So I plug it into iTunes to restore, after restoring, usually it will start up with freshly restored software (right?), but my iPod just start up with "use itunes to restore" message again! I try restoring it for few more times and it's still the same. What should I do?

    Hmm... Have you tried putting the iPod into Disk Mode and then re-attempting this process? This will help the iPod stay mounted and appear as another external disk under "My Computer"
    [Putting iPod into Disk Mode|http://support.apple.com/kb/HT1363]
    Otherwise, I would try reformatting the iPod using the tools provided by Windows and see if that helps. Instructions on how to do this can be found below. After reformatting you will have to restore the iPod via iTunes.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    B-rock

  • Which ipod will be given in replacement to ipod nano 1st gen 2014?

    Hie
    Can anyone tell me which ipod nano will be given in replacement to ipod nano 1st gen?
    I have a ipod nano 1st gen and I want to replace it
    I live in India
    Thank u

    Sorry, but India is not listed >  Apple - Support - iPod nano (1st generation) Replacement Program

  • Ipod nano 1st gen (not recognized by iTunes and won't resotre)

    My ipod nano 1st gen has been working fine up untilthis afternoon..I plugged it in as normal while running iTunes and I wanted to remove some music files t add new ones and all of a sudden it wasn't recognized by itUnes anymore, you can't resotre it on iTunes or manually and whenever I plugge it in the itunes shut down..
    It was working fine before that, I was able to add and remove songs on it..I also have Ipod Touch 5 that works fine no problems and UBS ports are ok as well (all other ubs devices work on them). I have the latest, newest version of Itunes instaled
    HELP
    Thank you

    Hey moni8181,
    If you are having an issue with your iPod nano not being recognized by your computer, I would suggest that you troubleshoot using the steps in this article - 
    iPod nano Troubleshooting
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • Is there any differences between a iPod nano 1st gen usb cable and a iPhone 3G  usb cable? thanks

    Is there any differences between a iPod nano 1st gen usb cable and a iPhone 3G  usb cable? thanks

    Yes you have a one year warranty from the date of purchase from Apple. Go to this link and on the bottom right hand side it will ask you to enter your serial number and will tell you if you are still under warranty. http://www.apple.com/support/
    If you are you can take it to a Apple store, or request service online here http://depot.info.apple.com/ipod/
    If it is out of warranty you can google a third party service provider and get it serviced out of warranty. There are two that I know of that provide free diagnostic service. You only pay for shipping and they will tell you what is wrong and what it will cost to fix. They are ifixipodsfast.com and ipodmods.com but there are others also (I just have no experience with them) Good luck and as was stated it should charge from your usb. and just for grins, look at the docking connector on your ipod and see if there is any obstruction that is obvious.

  • I found an ipod nano first gen and cannot restore it

    I found an old ipod nano first gen and and when i turned it on it said connect to itunes and i did i downloaded the version of this ipod and when its about to start the restoration process it stops and says "couldn't restore ipod in use". I have tried to do the disk mode thingy but it didn't help at all. How can i fix this.

    Did you do anything at all to return it?
    It is probably not repairable. You can use this: http://www.apple.com/support/ipodnano_replacement/

  • Ipod nano (1st gen) not charging/not showing up on computer or itunes

    I recieved a 2GB ipod nano (1st gen) as a gift back in December 2005. It's worked fine until recently. Yesterday, I tried to charge my ipod. However, when I connected my ipod to my power adapter to charge it nothing happened. The charging symbol didn't even show on the screen. So then I tried plugging it in to my laptop computer. Same result: nothing happened and worse still, it didn't even show up on My Computer or in iTunes. I then tried connecting it to our regular computer. Same result as the laptop and still no charging icon. I tried my 2nd generation nano thinking that maybe something was wrong with the USB cable or with the power adapter but it worked fine with everything. I also tried another cable. But still nothing worked. I've tried the 5 R's thing but it didn't work. I even tried leaving my ipod alone for awhile to no result. Finally I tried putting it into Disk Mode and that's where it is now. I've tried to run through the steps again with this but it didn't work. So now it's in Disk Mode and it needs to be charged but I don't know how to do it. I'm starting to think that I just need to get the battery replaced. Unless someone else has a fix that will work?? Please help!!

    It sounds like the port or cable is having a problem. First try a different cable.
    If the cable doesn't fix things then try resetting the PMU (Power Management Unit) then see if the iPod will show up.
    MJ

  • Got a refurbished iPod Nano 6th gen, and went to connect it to my PC,

    Got a refurbished iPod Nano 6th gen, and went to connect it to my PC, it said it was configured to Mac and went to restore it and install software. Now shows white screen with little computer icon and warning sign. won't reset

    By a reset, I assume you mean pressing and holding both the Sleep/Wake and Volume Down buttons together long enough for the Apple logo to appear?
    Can you try and force the Nano into Disk Mode and then connect it iTunes and restore it again?
    Putting iPod into Disk Mode
    B-rock

  • Corrupted ipod nano 1st gen

    I have a corrupted Ipod nano 1st gen... and restoring the nano wont work at all... I cant find a single way to fix it...

    it shows a folder with a yellow triangle with a exlamation mark next to it and it also shows something saying corrupt on the bottom and the apple website on the bottom

  • Ipod Nano 1st gen not working

    Hello all
    I have a Ipod nano 1st gen 2gb. I can restore it, reset it with menu select key, but everytime it starts it loads to the lanuage screen and i can not click to get further into the ipod, it use to work before i upgraded the firmware to the new 1.3.1. is there away to downgrade back to like 1.1.9. I am running vista 64 bit so i cant run the 32bit restore program to try that. If there is anythign anyone can think of that will be great. Yes i have reset it via the menu key and select key like 1000 times...

    I downgraded the nano from 1.3.1 to 1.1.1 then down to 1.0 and then back to 1.3.1 and still the same thing, no select function upon the Language Screen. Anyone have anything else i can try?

  • Ipod nano 1st gen not syncing

    My ipod nano 1st gen is not syncing properly. When I plug it in and itunes starts up, it begins the syncing process, but gets stuck midway through. I have it set to only sync checked songs and a specific playlist. Also, it still has enough memory. Cannot get it to sync and stays busy so long i cannot eject because computer is busy syncing! I've also tried to reset and restore, but it wouldn't restore because it was busy syncing!! Help please!

    I have the same problem. I have an Ipod Nano 1st generation that won't sync also. I tried downgrading Itunes version and that didn't work. I installed the latest Itunes and firmware but I'm still having the problem.
    The only solution I have found is to reset the ipod, then do a restore in itunes then run the sync. It works then once and you will need to do it again everytime you sync otherwise it won't sync. It is rather disapointing considering that the Ipod is supposed to be a premium product.

  • For the iPod nano 1st gen replacement program what generation of iPod nano will it be replaced with?

    For the iPod nano 1st gen replacement program what generation of iPod nano will it be replaced with?

    8GB. Nice little unit when used by itself. BUT don't even think about connecting to any docks or other third party interfaces 'cause IT AIN"T GONNA WORK RIGHT!
    Both of my Pioneer car stereos have the same problem with both of my 6th generation iPod Nanos:
    The first time you connect the iPod, the radio recognizes the it and works. BUT THE NEXT TIME YOU TURN THE RADIO ON THE DISPLAY FREEZES. The only way to get it working is to disconnect the dock connector from the iPod and reconnect it. THIS ***** AND IS NOT THE WAY THESE UNITS BEHAVED WITH MY 1ST GENERATION NANO. Both of my new 6th generation ipods have been restored (several times) and have the latest firmware which, as of this writing is 1.2 and still the problem persists.
    My two Pioneer car stereos that don't work right with the iPod Nano 6th generation:
    Pioneer DEH-P4900iB
    CD-i200 iPod cable for above
    Scion XB iPod enabled head unit T1808
    I've made an AppleCare adviser aware of the problem but I doubt that this information will ever make it to engineering so I don't have much hope that this will ever be fixed.
    I would suggest that all 6th generation Nano users check it's compatibility with any third party interfaces they have and report their findings on this discussion board. Perhaps we can get Apple to FIX THIS SERIOUS PROBLEM.
    Apple are you listening??

  • Ipod nano 1st Gen

    I have an iPod nano 1st gen stuck in a restore loop. I have an iPod touch 4th gen and it has never happend to it. The nano just says restore to iTunes. Then I restore it but it kept going into "restore to Itunes". I am using Windows XP to restore it. I would use my MacBook but thats somewhere else.

    1st try reinstalling the latest version of iTunes.
    1. go to music, iTunes, iTunes Music, and then you should see all of the artists in your library. Move the iTunes Muic folder to your desktop.
    2. uninstall iTunes.
    3. Download and install the latest version of iTunes
    4. to restore your Library open the iTunes Music folder on your desktop and drag all of the srtists to your empty library.
    secondly, then try syncing your iPod to your new library
    hopefully this should work! :P

  • Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?

    Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?

    Yes. They'll still replace your iPod. Several users have indicated that they have returned damaged iPods and were still given a replacement iPod.
    B-rock

Maybe you are looking for

  • How to open files in MIDP (from the jar file)?

    Hello, I can't seem to figure out how to open a file that is in my MIDP applications jar-File. From what I've found via Google, I assume that the way to do it should be by using Connector.openInputStream("file:{path_to_my_file}") but I only get the e

  • Is it a bug that  BOE XI 3.1 emailing doesnot  supports FRC2822?

    Dear All, SMTP RFCs.                                                                                The main concern is around section 3.4 of that RFC. It says that                                                                    addresses in addre

  • Generating email content through IDS

    Hi, We are at the early stages of a project involving Documaker Server and IDS. We already have a SOA setup in place and the tandem Documaker / IDS is already generating PDF documents on demand when requested by an in-house web service. We want to bu

  • HDR in PSE 8

    Does the current version of PSE support HDR? Thank you. David

  • Unsolved message type error

    Hello! I have an error that I cannot solve. Here is the general description: I have a xsd file that I imported in my BPEL process: <?xml version="1.0" encoding="windows-1250"?> <schema targetNamespace="http://xml.zoppas.com/CommesseError" xmlns="http