Restored Nano Won't Hold Same Quantity

My 2g nano (8GB) freaked out a week ago (it would turn itself on and off on its own, even in Hold mode, so the battery died after several days when I hadn't used it or recharged it). Then it got disconnected from the computer, so it had to be restored and I had to upgrade to a newer version of iTunes. (This means there are now games on my nano that weren't there before — I don't want them but I can't delete them. Grrrr!!!!)
Prior to the freakout, my iPod held 1523 songs and had plenty of available space for more. Post-restoration it will only hold 1022 of the SAME songs. How can this be? I followed the troubleshooting steps for nanos but nothing made a difference. Why are my songs taking up more space NOW than before? The import settings are identical to what they were before the restoration. The songs are identical to what they were before the restoration. So what gives? I am so frustrated that I am tempted to just buy another iPod that will hold closer to the promised 2000 songs, but I would rather find out if this can be fixed first. I know there is a certain amount of built-in obsolescence to these devices but I don't have $$$ to throw around. Thanks for any help.

Thanks. It does sound like that could have been my problem.
But, alas - I just tried changing the iPod drive letter to I, and then to X, with reboots in between, but still the same problem ;/
I can't really change the drive letter of my windows drive, but I guess that changing the ipod drive is sufficient too.

Similar Messages

  • IPod Nano won't hold charge, play or sync

    Hi all,
    been having issues with my 6th gen iPod Nano recently.
    When charging, it will hold charge for a small amount of time but no more than an hour even after being left overnight.
    When clicking on the radio app it doesn't recognise headphones are plugged in.
    When trying to play a song, it says it is playing but there is no sound and the scrubbing bar remains at 0 seconds. If you scrub to later in the track it says it is playing but does not advance.
    When connecting to a computer it freezes and rarely pops up in iTunes.
    I have tried restoring it, charging from full and accessing the menu by pressing the volume + & - buttons, but now all this does is bring up a white screen which says 'ok to disconnect'.
    I'm out of ideas, but would love to hear anyone elses suggestions.
    Thanks,
    Matt

    It depends on how you are using the Nano.  Otherwise, no.  If you feel as though this is an issue, schedule an appointment at your local Apple Store/Genius Bar and explain the situation to them. 
    B-rock

  • Help! ipod nano won't hold as many songs as it says it can

    I have an ipod nano that is 2GB and can hold up to 500 songs. I only have 113 songs on it and when i try to put more on it it says that there is not enough room to put more songs on it. How do i make it able to hold more songs????
    Toshiba   Windows XP  

    Bear in mind that the song limit advertised is based on 4 minute per song, 1MB per minute, encoded as 128 kbps in AAC format.
    Check the encoding of your songs. To do this, right click one the sorting columns in iTunes tick bit rate, then click this new column to sort the songs by bit rate. Any songs that are encoded at higher than 128 kbps will be causing excess space to be used for storage. To change the bit rate of these songs you can convert them to AAC format (sound quality will be lost). Or you can reimport them from CD/Computer once you have changed the import settings as detailled below, but that could be time consuming.
    To convert go to the edit menu, select preferences, click the advanced tab, and select importing.For best song capacity on the iPod, make sure that the encoder is set to "Import using AAC encoder", and "High quality 128 kbps". Hit OK. Then collect together all the high encoded songs and select them all (click the top one and hold shift, then click the bottom one). Right click the highlighted area and go to "Convert selection to AAC". This could take a while if there are many songs.
    Once complete, go to the Edit menu, and select "Show duplicate songs". Delete all the "old" songs, recognisable by their bitrate, format or size. Again, to show these, right click a sorting column, and tick the respective ones.
    Once this is done, update the iPod.
    If your songs are all changed into 128kbps AAC and are mostly all around 4 mins long, then you should get very close to the song limit advertised

  • My 2gb Nano won't hold anymore than 200 songs.

    Whats up with it???
    PLEASE HELP.

    It's probably because you have the import settings and bitrate set wrong. Look in iTunes under edit/preferences/importing. What does it say in settings and import using? You need to compress your music using either mp3 or aac. If you see AIFF, WAV or Apple Lossless then those formats are going to take way more space than mp3 or aac, especially the first 2 which are raw uncompressed formats. Bear in mind that Apple quotes 500 songs using aac at 128kbps for a 4 minute song.
    

See this article.
    

About import settings and hard disk space.

  • My ipod nano (6th) won't hold volume

    My 6th gen. ipod nano won't hold volume, but moves right back to silent after clicking the bar full.  I have reset it to factory settings.  What else?

    If it is that new you may need to take it to apple. Another thing to try is press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears.

  • Ipod nano won't sync podcasts from iTunes after I "Restored" the ipod.

    iPod nano won't sync podcasts from iTunes after I "Restored" the iPod.

    If you've read the Technical Specification you will find that the nano can only use Firewire for charging, not for syncing:
    http://www.apple.com/ipodnano/specs.html
    "Charging via USB or FireWire to computer system or power adapter (sold separately)"
    So you can rule that out.
    Have you tried the 5 R's?
    http://www.apple.com/support/

  • IPod touch 2nd G won't hold charge. Restore does not help. removing all apps. Still discharges. What gives?

    iPod touch 2nd G won't hold charge. Restore does not help. Removed all apps and it still discharges even if not turned on and used for anythig. What gives?

    If it is warranty, bring it back to the Genius bar and insist on a replacement.  If out of warranty, you can get a replacement iPod with a new battery for $79 at the genius bar.

  • Why won't Nano (latest model) won't hold 5'2" setting in the Fitness app?

    Why won't Nano (latest model) won't hold 5'2" setting in the Fitness app?

    This is a known bug.  Submit your feedback to Apple on this through the link below.
    http://www.apple.com/feedback/ipodnano.html
    B-rock

  • Ipod Nano won't restore to sync

    My brand new Ipod Nano won't sync with my Itunes.  The Itunes software tells me to restore my Nano, The screen it tells me to restore using isn't on my Nano, but I restore to factory settings, and it still won't work.  Gives me a message in Itunes"The iPod "iPod" cannot be restored because it contains files that are in use by another application."  What???  I just plugged it into the computer after opening it in the box from the store?

    Make sure the Enable disk use option is NOT ticked from under the iPod's Summary tab in iTunes. If you do have to remove this tick mark, be sure to hit the Apply button in the lower left hand corner of the window in iTunes to update the changes to your device. Then try restoring it again.
    B-rock

  • HT4317 ipod nano got washed and dried now battery won't hold a charge

    My Ipod nano got washed and dried, now it won't hold a charge? How do I fix it !

    Take a look at this link, http://www.apple.com/support/service/

  • When I play either music or movies on my ipod touch it stops every few seconds and I have to restart the song/film.  AT the same time, it won't hold a volume contol.  It jumps louder or softer, or simply jams on either very low or maximum volume.  Help

    When I play either music or movies on my ipod touch it stops every few seconds and I have to restart the song/film.  Also, it won't hold a volume contol.  It jumps louder or softer, or simply jams on either very low or maximum volume.  Help?

    No one here is going to do anything about it. Send feedback to Apple.
    http://www.apple.com/feedback/ipad.html
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • 7th gen iPod nano won't turn on after disconnect.

    7th gen iPod nano won't turn on after disconnect. I loaded some new music, synced and ejected correctly. screen went black on unplug. Waited, did the button trick, didn't work. plugged it back in & it is recognized immediately. restored, resynced & ejected again. same thing-black screen w/ no response. Charged it overnight. ejected, screen then went to language setting. OK for English, eject & back to black on unplug. Switched ports for cable, tried eject thru PC...all resulting in dead nano after unplug. I really don't want to charge into the store & take it out on the poor kid who will catch the brunt of my frustration. anyone have a suggestion?

    Hello Marie,
    I would be concerned too if my iPod nano was not powering on.  I found an article for the 6th generation iPod nano that has steps you can take for an issue like this (the only difference for the 7th generation iPod nano is the steps you will take for the reset. I included the steps to reset a 7th generation iPod nano below):
    Will not turn on or screen remains dark
    Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
    If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
    If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
    If the screen remains dark and will not turn on, then your iPod may need service.
    You can find the full article here:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    All the steps apply to the 7th generation except the steps for the reset.  To reset a 7th generation iPod nano, use these steps:
    Press and hold the Sleep/Wake button and the Home button for six seconds, or until the screen goes dark. The Apple logo appears after a few seconds, and then the Home screen. You may need to repeat this step.
    I got these steps from this tutorial, which may also help with your iPod not appearing in iTunes:
    iPod nano not appearing in iTunes
    http://www.apple.com/support/ipodnano/assistant/itunes/
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, what should i do?

    I have done absalutely nothing to my 4g apple ipod touch, and it over heats, won't hold a charge, and the front camera will not work. I bought this brand new in december, and i've barely used it. I've tried restarting it and everything, I honestly think this is out raging because i spend over $200 on this. To have for music and instagram. I use it about an hour a day, but i've only been using it for about 3 months although i've had it since December. Any suggestions that may help me?

    Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    If still problem make an appointment at the Genius Bar of an Apple store.

  • IPod Nano won't sync after iTunes update to 11

    My 5th Generation iPod Nano will not sync to iTunes 11. I am running iTunes 11.0.1, on an one year old iMac running on an Intel Core i5, running MacOS X 10.8.2 with 4 GB of memory. Now that we got that out of the way-- I use this iPod daily. Once I updated to iTunes 11, synching has been sporatic. Once I plug the iPod in, iTunes opens like it should, however the iPod never appears in the iTunes window, only in the Finder. I have done the following:
    ejected the iPod from the Finder window and then unplugged it, and reattached the iPod.
    Quit iTunes and restarted, reStarted the iPod by toggling the power switch and holding the Menu/Select buttons until it restarted.
    Rebooted my computer
    Restored the iPod nano
    Results are the same. Sometimes it will sync, after an extended period of time, without reason. Once I eject and need to reconnect the device, I am unable to get it to sync. Sometimes I have ended up with a spinning beachball and have force quit iTunes and sent a report and a description, but Apple doesn't seem to have come up with an update yet.
    I can tell you this-- I have not seen an iPod that would be a suitable replacement for this one-- I love not having to look at the screen to operate it's simple controls, and it is the perfect size.
    I can also tell yo uthis-- The new suprise user interface on iTunes 11 is clunky and requires too many steps to maintain my playlists. Do not like it.
    Suggestions?

    Hey hirsty!
    I have a link for you here that can help you troubleshoot this issue:
    Apple - Support - iPod nano - iTunes Troubleshooting Assistant
    http://www.apple.com/support/ipodnano/assistant/itunes/
    That link will help you through some steps that will help you resolve this issue with your iPod nano syncing. Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • My iPod battery won't hold it charge??

    My iPod 4th generation won't hold it's charge it is only 15 months old

    Just what battery life are you getting?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                              
    Apple will exchange your iPod for a refurbished one with a new battery for $79. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following will replace the battery for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the battery yourself if you are up to it
      iPod Touch Repair – iFixit

Maybe you are looking for

  • Adding a jar to the classpath of an executable jar (mixing -jar and -cp)

    Hello, frankly I hesitated over posting this to "New to Java"; my apologies (but also, eternal gratefulness) if there is an ultra-simple answer I have overlooked... I integrate a black-box app (I'm not supposed to have the source) that comes packaged

  • Acrobat 9 Std Blue Screens on Second Scan

    I am using Acrobat 9 Standard with a Fujitsu fi-6140 and the Kofax VRS Twain driver on Win XP SP3. I have it set to launch Acrobat whenever I hit the scan button on the scanner and OCR the PDF in Acrobat. On the first scan, Acrobat brings up the cust

  • TiWorker.exe and TrustedInstaller.exe not signed on Windows 8.1 Pro

    I am running Windows 8.1 on a Surface Pro tablet, all up to date. All Microsoft files in the system are digitally signed except the following two files. TrustedInstaller.exe, Version 6.3.9600.16384 dated 22-Aug-2013, size 98,816 bytes TiWorker.exe, V

  • Could not determine code page Error in remote sys in XI

    Hi, When we try to send some IDOCS from ECC 5.0 sys to 4.6C sys via XI (M70) we are encountering below issue. <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">   <SAP

  • Need Optimized Solution to insert a table with 70 columns

    Hi, I need to insert almost 13 million records to a table which has 70 columns, and each column is a derived one.I have used the pl/sql tables to get all the 13 million records and process them, it takes 3 mins for 100 records. Any optimized solution