Restored system from Time Capsule but now lost access to the backup files

Last week, my drive flaked out and I had to restore my system from my Time Capsule. Now everything is back to normal except that I've noticed that upon trying to auto backup my Mac Pro, it says the disk is full. When I use Time Machine to access my old files, it appears I no longer have access to anything I had previous to restoring my system from my Time Capsule. I believe the link to the old backup file is broken and it's trying to create a new full backup file, in addition to keeping the old file.
Is this normal behaviour after a full restore from a Time Capsule or can I still somehow relink my computer to the file from which it was restored, and still have access to my backup files?

kencanuck wrote:
Last week, my drive flaked out and I had to restore my system from my Time Capsule. Now everything is back to normal except that I've noticed that upon trying to auto backup my Mac Pro, it says the disk is full.
Yes; everything you restored is treated as changed and will be backed-up again: http://support.apple.com/kb/TS1338 Time Machine most likely deleted all but the last backup, trying to make room for the new one.
When I use Time Machine to access my old files, it appears I no longer have access to anything I had previous to restoring my system from my Time Capsule.
Exactly how did you restore? Did you restore your entire system, starting with your Snow Leopard Install disc?
If you didn't, it's possible the account you're using is not recognized as the same one on your backups.
Can you see the last backup? If not, see #E2 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
Message was edited by: Pondini

Similar Messages

Questions about "Restore System From Time Machine"

Looking to fix an apparent system corruption problem on my work machine, I discovered the "Utilities > Restore System From Time Machine" option of the Leopard installation disc. I have some questions that are not answered in http://support.apple.com/kb/HT1177:
1. Does this option erase the hard drive and install a fresh system from DVD, or do I need to do that in a separate step?
2. What about software updates - when are they applied?
3. Will third-party system extensions be reinstalled OK?
4. I tried launching the process on my home machine, just to see how it works. At work I have a dedicated disk for Time Machine, but at home I have a Time Capsule, serving two Macs via Ethernet. I've also configured the TC to give us a shared volume; so in normal operation I have two network volumes, <Username>, containing Time Machine's sparsebundle file for that user's Mac, and "Shared". When I boot from the installation DVD and run "Utilities > Restore System From Time Machine", the backup volume list only shows the "Shared" volume. If I select it, I'm prompted for my TC username and password; I enter it, TC spins up, and then nothing. I cannot continue the restoration process, and reselecting the "Shared" volume does nothing. ???
Thanks in advance for your help.
-- Phil

For the record, here's what I've found out so far:
1. The "Restore System From Time Machine" option seems to want to restore everything, including the system, from the Time Machine backup. I wanted a clean system install, so I did an "Erase & install" followed by a "Restore from Time Machine" in the Migration Assistant. That got me most, but not all, of my settings back; exceptions include the printer configurations, the desktop picture, and the Dock settings.
2. Software updates can be applied after the new system is rebooted.
3. Most 3rd party extensions seem to have been restored OK, but some (like MacFuse) were not.
4. I'd still be grateful for any hints concerning how to get "Restore from Time Machine" to work with a Time Capsule.
-- Phil

Where does restored data from time capsule get placed

Where does restored data from time capsule get placed?
For instance, is the data seamlessly placed where it was missing or corrupted, or does it enter a program under some separate "heading" in the program 1) if letter is restored to Mail, 2) if entire mailbox restored to Mail, 3) if single letter restored to Documents, 4) if several photos to iPhoto, 5) if one folder restored to desktop.

Cannot answer all your questions, but will answer regarding iPhoto.
You cannot restore individual photos to iPhoto, you must restore the entire iPhoto Library.
When you do this, you are given several options. See the shot below for details:
The restored library will be placed in the default location....the Pictures folder

Western digital hard drive worked fine on my pc. I connected it to my macbook and it began time capsule, but now I cannot see any of my files on either my mac or pc?

My Western digital hard drive worked fine on my pc. I connected it to my macbook and it began time capsule, but now I cannot see any of my files on either my mac or pc? Please help

Hi there,
Thanks for the reply.
I plugged my usb hard drive in and what looked like time capsule started automatically on my mac. The same hard drive worked perfectly on my laptop pc before, now it connects but isn't visible in my computer.
My second hard drive works perfectly well on both my pc and mac, so I am not sure what has happened to the one in question.
Regards,
Stephen

I'm trying to extend my wifi network with time capsule but it can't find the existing wifi network

I'm trying to extend my wifi network with time capsule but it can't find the existing BT wifi network even though it is there with a good signal strength. The Time Capsule is connected to a Netgear router via ethernet.

You will need to start over on the setup of the Time Capsule as follows:
Disconnect any Ethernet cables that might be connected to the Time Capsule, but leave it powered on
Hold in the reset button on the back of the Time Capsule for 8-10 seconds and release. The reset button is located next to the AC power socket.
Allow a full minute for the Time Capsule to restart to a slow, blinking amber light
Connect the Ethernet cable from a LAN <--> port on the Netgear to the WAN "O" port on the Time Capsule. The Ethernet cable must remain connected at all times.
Click the WiFi icon at the top of the Mac's screen
Look for a setting of New AirPort Base Station
Click on Time Capsule
The example below shows an AirPort Express. You will see Time Capsule on your screen.
That will get the setup wizard going. It will take a minute to analyze the settings, then display a screen that looks like this, except you will see a picture of the Time Capsule
Network Name..........Type in the exact name that the Netgear wireless is using
Base Station.............Type in a name that you want to call the Time Capsule. Use something short and simple. Mine is TC, for example
Password..................Type in the exact password that the Netgear wireless requires
Verify.........................Verify the Password again
Click Next
The setup wizard will configure everything for you automatically. When you see the message of Setup Complete, click Done.
That's it. Now you have one big "extended" network. Technically, this is called a "roaming" network.

Just moved to new home, updated router and new system with Time Warner and now we cannot get the appl

just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?

Castle15 wrote:
just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?
Cannot get the Apple.. what?
Model and actual device you are talking about?
Apple covers a pretty huge range.. If you mean extreme.. did you reset it to factory and start over.. that is always necessary when you change a network. You cannot pick up a router from one home and network and plonk it into another and have it work.. aint gonna happen.
You also need to power down any pure cable modem for 20min or so to get it to forget the old MAC address that captured the IP so the Apple ??? has a chance to work.

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

Bought a new iphone and i cant activate it unless the previous owner deletes the account from their icloud but i lost contact with the previous owner how can i fix this?

bought a new iphone and i cant activate it unless the previous owner deletes the account from their icloud but i lost contact with the previous owner how can i fix this?

Take it back where you got and and get your money back.
As has been pointed out, if there was a "previous owner", the phone is not "new". Thephone you purchased is most likely stolen. If whoever you bought it from won't give you your money back, turn it over to the police.

HT3275 I just brought a New Macbook Pro and was successful in transfering data from my old macbook. However when I try to back up to my time capsule I receive this message. "The backup disk image "/Volumes/Salvatore Totino's Time Cap/Lorraine's MacBook Pr

I just brought a New Macbook Pro and was successful in transfering data from my old macbook. However when I try to back up to my time capsule I receive this message. "The backup disk image “/Volumes/Salvatore Totino's Time Cap/Lorraine’s MacBook Pro.spars

You may need to reset TM and start with a fresh full backup.
For the particular error see
http://pondini.org/TM/Troubleshooting.html

After resetting Time Capsule, how do I access my previous backups?

After re-setting Time Capsule, how do I access my previous backups?

Access it to do what??
You can migrate the data.. see Pondini instructions for migrate. (or from apple).
His instructions are a little out of date.. but still more useful than the over generalised stuff Apple give you.
http://pondini.org/OSX/MigrateLion.html
OS X: How to migrate data from another Mac using Mavericks
If you wanted to continue using the backup with TM.. no you cannot inherit a backup from a different machine.
To simply access the backup .. then open the sparsebundle from finder or TM..
See the instructions in Pondini.. Q15-17 here.
http://pondini.org/TM/FAQ.html
If you want to do something else you need to tell us what it is??

I backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?

i backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?

Don't you just love changes in interfaces?
I found the answer to my question.
When you attach a device (iPhone, iPad) to your Mac, in iTunes 12 in appears as a tiny icon in the second "row" of the iTunes display. Click the icon and the familiar iTunes display for the device appears. From there, on the Summary screen, you can see the dates of the backups of the device (iCloud and backup to the computer). You can also use the button to backup to the computer.

Time Machine could not complete the backup "Time Capsule". Unable to access disk image backup "/ Volumes / Time Capsule / iMac.sparsebundle" (error 112). How can I repair it?

Time Machine could not complete the backup "Time Capsule". Unable to access disk image backup "/ Volumes / Time Capsule / iMac.sparsebundle" (error 112).
How can I fix it?

You might want to take a look at Pondini's excellent support document......Time Machine Troubleshooting
http://pondini.org/TM/Troubleshooting.html
See # C17

Restored system from Time Machine backup disk but the system could not start-up

On MacBook Pro early 2008, restored the entire system from Time Machine backup disk to the entire disk.
The previous system on the backup disk had FileVault turned on.
The restore completed successfully and I was prompted to restart the system via the new restored system disk.
I heard the normal start-up sound, then the Apple logo, but it stuck at the logo screen. And the cooling fan run at almost full speed?
I have been waiting for a few hours, guessing it might FileVault the disk.
Finally I have to shutdown the machine as it stuck at the logo screen forever.
Anyone has the same issue? Any ideas?

BTW, I also tried Repair the system disk, Fix permissions via Disk Utility.
I guess I must lose some files either during the backup or the restore.

Restoring System from Time Machine backup - only option is older backup

I have two drives in a Mac Pro - a system drive and a data drive. Yesterday morning the system drive died. The computer hung and when I manually restarted it, I got the circle with a line icon, and then on a subsequent restart, after resetting the PRAM, I got the ? folder icon.
I restarted with the install disk in, and booted into Disk Utility. I attempted to repair the system drive, but it was reported to be corrupted and not repairable.
I installed a new drive, booted back into Disk Utility, formatted the new drive, and initiated a "restore from Time Machine".
My problem is, once the list of "complete" Time Machine backups came up, the most recent one listed was for October of this year, almost 3 months ago. In that time, Time Machine has been on and running without issue. I know there were Time Machine updates made for this computer the morning of my crash, and the day before, etc. But in terms for restoring my system, my most recent restore point is late October.
I went ahead and restored to that most recent Time Machine "complete" backup, and several hours later my system is back up and running, but as it was three months ago, not yesterday morning.
Why, if Time Machine has been performing hourly backups without fail, was I unable to restore to something more recent? If I connect to Time Machine (on a Time Capsule) from the computer in question (after the restore) and browse the backups on it, the most recent folder I see is 2011-01-14-190729 - still not as recent as I would hope (maybe the drive going bad was causing errors with very recent backups) but much more recent than October.
I would really like to be able to get my system back to a much more recent snapshot than it's at now. (I have disabled Time Machine backups on it in the meantime so as not to overwrite the backups I currently have)
Any suggestions?

Will Henderson wrote:
I would really like to be able to get my system back to a much more recent snapshot than it's at now
See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
On the list of backups (point g there), click the "pop-up" menu; there may be two entries there. If so select the other one -- it may have the backups you want.

After restoring imac from time capsule stuck at apple booting screen

Hello,
I had an IMAC with hard drive that crashed. I installed a new internal HD.
Restored from time capsule. After 10 hours of restoring, it restarted.
Now it has been stuck at the Apple boot screen with the spinning wheel now for 3 hours.
Does it take that long? Anything wrong maybe.
Thanks for all your help.

Hello Brenden,
Thanks for the link. I have already tried everything in that kink but still getting the same issue.
One clarification if you can help me.
When I replaced my HD, I booted up using Mountain Lion CD.
I went to Disk Utility I paritioned the new drive.
I then went to System Restore and tried to restore from my time capsule a backup from Yosemite, Maverick and Snow Leopard
When imac restarted i was getting messages that it cannot boot up..Same message over and over.
Therefore, I once again went in and booted up using Mountain Lion CD,
Went to Disk Utility and erased all contents of the whole drive. Clean.
This time I went ahead and ran the Mountain Lion Installer.
Imac restarted and booted fine to Mountain lion.
Did all updates and so forth.
Now went to Utilities folder and selected Migration Assistant and chose to restore once more.
Restored finished, and this time I am getting the issue I originally reported.
My question is, since I am running Mountain Lion, if the backup was made using Yosemite, just before my IMAC crashed,
is this the problem why it is stuck at Boot. Because i need to be running Snow Leopard at leat to upgrade to Yosemite.
However, how come none of my backup s can be restored , just by going straight to restore backup instead of installing some mac os x first.
Thanks,

Restored system from Time Capsule but now lost access to the backup files

Similar Messages

Maybe you are looking for