Restoring 2nd Gen iPod not working

For some reason, my iPod got stuck when attempting to play. I went to the forum and found out that I needed to restore my iPod. However, I get this message:
There was a problem downloading the iPod software for the iPod “iPod”. You do not have enough access privileges for this operation.
I tried deleting "temp" folder. Didn't work.
I tried working on the "ipod services". Didn't work.
Does anyone know how to solve this? THANKS in advance.

Restore to factory settings.new iPod if you have not yet already. If still problem time for an appointment at the Genius Bar of an Apple store.

Similar Messages

2nd gen iPod not visible on Desktop or in iTunes

I have a 40GB 2nd gen iPod that works fine and until recently always appeared on the Desktop and in iTunes whenever connected. Haven't had any problems with the iPod or iTunes. Now it is not visible at all but it does still recharge.
It's connected with FireWire 400 but it doesn't show up in System Profiler or Disk Utility.
I've reset it. I've forced Disk Mode. Nothing works.
Another thing... I have my whole music collection stored on an external LaCie drive and connected to the laptop with FireWire 800. iTunes works fine, though, whenever I connect the iPod to the laptop, iTunes stops playing (the spinning colorwheel appears) and as soon as I disconnect the iPod, I hear the external drive kick in and iTunes resumes playing.
Please help! Thank you.

Thank you for your reply, socrates.
I always connect the iPod into my Powerbook via FireWire 400 and the external LaCie is connected to the laptop via FireWire 800. So, there is no daisy-chain setup.
Actually, I've just realized that my iPod is 3rd generation not 2nd. When I looked at the "Settings" on the iPod it says Version: 2.3 so I thought that meant 2nd generation but just discovered otherwise. Is there any way that I can change the title of the thread?
And any more advice would be much appreciated. Thanks.

The latest update (9/2/11) for iPod 2nd Gen will not work

This is getting frustrating, I can't downlaod any apps and its moved like 1% in a hour

The last update for 2nd gen ipod touch is 4.2.1 and was released in nove of 2010.
Is this the update to which you refer?

2nd gen shuffle not working windows 7

I connected my 2nd gen shuffle to my laptop (Windows 7) and it told me I need to restore it, but Itunes keeps crashing every time i tried. I restared my pc, then it stopped showing in Itunes but showed on devices, and was on. Now it does nothing at all, no lights or anything. Any help appreciated

I have two suggestions. There is an iPod Reset Utility
http://support.apple.com/kb/HT1238
that is only for the 1st and 2nd gen shuffle. It does something like a Restore in iTunes, but works at a "lower" level in cases when a Restore in iTunes does not work (or cannot be used). For it to work, the shuffle does need to be seen by the system, and it sounds like yours meets that requirement.
Unfortunately, I don't think it works with Windows 7. If you happen to have an older PC with 32-bit Windows, you can use that PC to run the utility on the shuffle. Or, maybe you have a friend with a Mac or 32-bit Windows PC that can run it for your. Or, if you have an Apple Store nearby, you can make a reservation at the Genius Bar and ask them to look at it and run the reset utility.
The second suggestion, if you don't have a convenient way to use the reset utility, is to use Windows to reformat the shuffle's storage like it was a flash drive. Use a "full" format (not the "quick" option). Use the "FAT" format type. Make sure iTunes is NOT running. After it is reformatted, it will be blank. When you run iTunes, it should recognize the shuffle and ask you to Restore it (to re-install the software and set it to default settings). Hopefully, it will work this time.

Just restored 2nd gen ipod touch music won't play and screen freezes

I don't know if anyone can help, but i had a secound hand 2nd gen ipod for xmas, i restored and updated it on the computer and i was working fine, then over ther weekend it started to freeze so i striped again back to factory setting now it will down load stuff but won't play games ( it freezes) and when i put music on there is know sound. i have tried it on a nother computer and i have scaned for a virus. please can anyone help?

Try to set it up as new device without using the latest backup, explained here:
How to back up your data and set up as a new device
Has the device been jailbroken by the former owner? If yes, your problems could be a result of that:
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues

IPod Touch (2nd gen) - Does not work with Component AV Cable

I have a 2nd generation iPod Touch. Today I bought the component AV cable at the Apple store (along with a universal dock). Connected it correctly to the TV and:
1. No picture (screen is blue, as though nothing connected); no sound (whether video or music)
2. Whatever video is playing on the actual iPod gets stuck - as though it is on "pause", with the difference that you can push "play" and "pause" and the only thing that does is change the "play" or "pause" icon from one to the other or vice-versa--video will not actually play
3. Setting Widescreen to "on" or "off" has no effect
4. Tried connecting it to an old iPod Nano (2nd gen I think) - also no sound.
Please advise!

Alex_K
Try changeing your TV out setting, found in the (Settings) of your ipod. Following Paragraph found in the iPod User manual (Page 98): http://support.apple.com/manuals/#ipodtouch
"Use these settings to set up how iPod touch plays videos on your TV. For more
information about using iPod touch to play videos on your TV, see “Watching Videos
on a TV” on page 39.
Turn widescreen on or off: Choose Video and turn Widescreen on or off.
Set TV signal to NTSC or PAL: Choose Video > TV Signal and select NTSC or PAL.
NTSC and PAL are TV broadcast standards. iPod touch displays NTSC 480p/PAL 576p
when attached to a TV using a component cable, or NTSC 480i/PAL 576i using a
composite cable. Your TV might use either of these, depending on where you bought
it. If you’re not sure which to use, check the documentation that came with your TV. "
Hope that helps,
Weston

Restoring 2nd Gen Ipod Nano?

hey guys, iv just had a real big problem with my ipod nano (2nd gen)...
well basically i was wanting to sync some more music from my itunes onto it and it just kept disconnecting itself for some stupid reason, and after several times it said something like my ipod wasnt readable, and i think i accidently put my ipod into factory mode and iv been attemting to try to restore it back to normal and iv tried everything but i cant seem to find anything that works. iv even tried putting it into disk mode but i dont know how that works, and every time i try to restore it it keeps coming up with this error code...and now i cant even load my music back on it now, im just wondering if anyone can help and knows how to restore an ipod nano like mine and knows how i can get it back to normal so i cant put my music back onto it?? Thankyouu

If iTunes is recognising your iPod you should have no errors when you go to restore it. Restoring your iPod will erase the hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation: Restoring iPod to Factory Settings with iTunes 7

Problems Restoring 2nd Gen. iPod w/ iTunes 7

Hello. I recently noticed that my second generation iPod was skipping songs and freezing a lot. I decided to do a complete restore to see if that would fix the problems. I connected the iPod and (using iTunes 7) went to restore the iPod. Once it downloaded the latest version of the iPod software, iTunes said it was restoring the iPod. I figured it would take a while. So after about 40 mintues I figured it had frozen or something so I unplugged it with the intention of restarting the computer and trying it again. However I guess it was still working because now when I try and turn the iPod on all I see is the apple logo. The computer will sometimes recognize it however it states that "iTunes has detected an iPod that appears to be corrupt. You may need to restore this iPod before it can be used with iTunes." When I click restore it tells me there's an error and it cannot finish restoring. So in retrospect it was stupid to unplug it. Is there anything I can do at this point. It isn't under warranty or anything and there would be no point in shipping it off to Apple (for that money I could just get a new one). Any suggestions? Thanks.
-Sacha
PowerBook G4 Mac OS X (10.4.7)

I have been having the EXACT same problem with my 3G, and it started with the iTunes 7, iPod updater 1.2 updates. Be aware that there are MANY others out there on this forum with the problems you are having... too many for me to believe that we all just happened to experience an iPod meltdown in the same way after the same iTunes update.
Anyway -- this morning I did a software update on my iMac, and now when I connected my iPod I did get the computer to recognize it. After reading that many others were having issues with the latest software, I did a restore on my iPod using the iPod updater from June of 2006, not the new one. (Try looking under Applications-Utilities-iPod updater to see if it happens to still be in your computer. If not, you can download it from Apple's site.)
I did successfully do a restore, but now I have connected to iTunes and am trying to reload all my music, and am not able to do so. It's stuck on one song, and I'm afraid to cancel it because this is what started my troubles a week ago.
But at least my computer recognizes that it is an iPod again.
I just wish Apple would post some solutions to this -- rather than letting more people like us download their bad software updates and kill their iPods.
Signed: a former Apple-lover hoping to regain the faith.

2nd gen ipod not recognized in windows xp or itunes

I have been working on this for 2 weeks. I have loaded the latest usb drivers/chipsets. Have followed every suggestion on apple website. Obviously lots of people have this problem. When my shuffle is plugged in the computer sees it as new hardware and trys to load a driver which of course there is not one. The hardware "fails to install" and windows can't see it. itunes diagnostics sees all the controllers but no ipod connected. I am about to return the shuffle as I cannot use it. There is nothing wrong with my usb ports my ipod nano works just fine as do all my other devices (camera, printers, mouse, etc.)
Has anyone solved this?

there is no drive letter assigned. ALL that the computer does is when the ipod is plugged in it says "new hardware found" and the word ipod appears in the system tray. Then immediately the Found new harware Wizard starts up. it says, "This wizard helps you install software for: ipod. So I am interpreting that the usb port is working and the driver for the port is reading the device. However, since there is no disk or software to install, eventuall a Found new hardware bubble reappears saying you a problem was encountered and the hardware was not properly installed. I don't get any farther than that. The device is NEVER listed in My Computer. As indicated before, there is an entry in device manager showing the ipod under other devices with the yellow exclamation point and the detail showing a Code 1 - no driver.

4th Gen iPod not working with older ipod speaker docks

Has anyone else had issues when docking a 4th gen ipod to portible speakers or an adapter that works fine with 3rd gen ipods? I've had 2 different things happen... with an alarm clock w/ ipod jack, the ipod will play, but it won't charge. With a travel speaker set for ipod that I use, the ipod won't play or charge. The same thing happens in my car which has a jack for an ipod.. my 3rd gen will play and charge, but my 4th gen will only play.
Any help out there to resolve this?

This might help with the charging problem:
http://www.scosche.com/products/productID/1667

Apple TV (2nd Gen) + Remote not working

My Apple TV 2nd Gen / remote isn't working.
When I press any button on the remote I get no response at all from the Apple TV unit (no flashing lights etc).
I've replaced the battery with brand new battery, still no joy.
I've tried the "hold menu rewind for 6s", still no joy..
Any ideas?

Also to be clear, the Apple TV unit is displaying an image on my TV screen and I get a solid white light all the time.

HT201263 Elusive connection error whilst trying to restore 2nd Gen iPod Touch device (iOS 4.2) via iTunes

Hi.
It's been a while since I've updated my iPod, and now that I've tried to update it (from iOS 4.2), whenever I click the 'Check for new updates' [for my iPod] button, iTunes states that the latest version is already installed, which obviously is NOT the case.
I am using the latest version of iTunes, and have already tried re-installing it.
After attemping to update, the next logical step was to restore, despite losing some of my data this way, for I currently have no-choice but to update via a different system to my usual managing computer of my device(s). However, an unexplained error occured, and my iPod is stuck in recovery mode (displaying that 'connect to iTunes' image it shows at this point).
Now, I've tried repeatedly to restore th iPod via iTunes, but it just won't work - as it is 'extracting software' (as indicated at the top of iTunes' window), it stops, giving a rather vague error: 'The iPod "iPod" cannot be restored at this time because the iPod software update server could not be contacted or is temporarily unavailable'.
I have no idea why this occcurs repeatedly, as it is persistent to do so.
I'd also like to confirm that my system is correctly connected to the internet at a speed that should be ample to install any required updates (furthermore, this error occurs after no-more-than 1 minute after attempting to restore the device)
Thanks in advance
~mini.

Thanks, but you don't happen to know anything else about this, do you?
Also, I've now realised it was pointless trying to update my iPod, for I've now found-out that the 2G can't be updated past 4.2.1 (or something) anyway >_>

Help with ipod classic 80gb 2nd new ipod not working

I need some help with my ipod, this is the second ipod I have had in the same number of weeks the first one worked fine for about 8 days and then when syncing one night it froze and then would not disconnect, I searched the support section and worked how to reset the ipod which | did many times, in the end I restored the ipod to the factory settings and synced again the end result of this was that the ipod would not turn on despite everything that I tried. The apple log would appear and the ipod would then try desperatley to switch itself on with the apple logo appearing and disappering all the time. Apple have replaced the ipod and I have fully charged the new ipod synced it this evening all was ok, the ipod synced and then told me to disconnect and the same thing is happening again I have tried to reset multiple times and all that happens now is the apple logo appears and disappers it will not switch on or off, itunes keeps telling me that it cannot recognise the ipod at this time and the safely remove section on my task bar on my computer is telling me that the ipod has malfunctioned. can anyone help? am I doing something wrong someone suggested that I should have downloaded itunes once I had my ipod and not before, I have about 20GB of music in itunes and I was not aware that you needed to use or own an ipod to use this music storage system
HELP
Thanks in anticipation

well it looks like you might have a tech issue here; try to return the ipod and choose a different store and buy one ... also try to uninstall itunes totally, back up your songs on a CD or DVD, and then re-install a fresh new copy of itunes ... this might work ... good luck!

Airport 2nd Gen. Not Working; Worth Selling?

Hello,
Recently upgraded to a 5th Generation that seems to be working better with modem. With 2nd Generation would have to unplug the router to connect to the internet several times daily. The firmware on the 2nd was updated. I was using 2.4ghz not 5 if it even would make a difference. Is the older Airport even worth salvaging? I thought about selling on eBay as is. Would appreciate any feedback. Thank you.

Check Ebay to see what other similar models are selling for to get an idea of what it might be worth.

2nd Gen Ipod Stopped Working For No Reason :/!

Basically, i've had my ipod for about 2-3 years and today it suddenly stopped working. By this i mean, its off and i can't turn it back on!
I can see a small light on the top right corner of the screen but that is all.
Also you know where u put the charger in? at the bottom of the ipod? that smells a tiny bit of burnt!
I dont know whats happened, i haven't dropped it or slipped water all over it! Please Help! i got this given as a gift so i dont know if there is any warranty!

Try here:
iPod touch: Hardware troubleshooting
If not successful, yu probably have a hardare problem. Maybe a dead battery. I would make an appointment at the Gnius Bar of an Apple store. It is free except for your time.

Restoring 2nd Gen iPod not working

Similar Messages

Maybe you are looking for