Restoring an existing Time Capsule backup to a new HD

The hard drive on my 6 month old MacBook Pro failed inexplicably several days ago. After wasting half a day trying to repair the disk, I caved in and made an appointment at the dreaded "Genius" Bar.
They verified my suspicions; complete failure. They kept the laptop, ordered a new drive and two days later informed me it was fixed. I sat down and connected it to my Time Capsule with an ethernet cable. When I turned it on, it played through that now insufferable multicultural "welcome"-in-twenty-languages jam and I followed Apple's instructions +Restoring an existing Time Capsule backup to a new Mac+:
http://support.apple.com/kb/HT1177?viewlocale=en_US
My favorite step is #12: +Your Mac will check the Time Machine backup for a period of time.+ When that period was clearly going to be a while, I went on a run, came back 40 minutes later and...it had returned me to the initial post-willkommen-bienvenido-etc. screen where I get to choose a language. Okay, my bad for leaving it unattended. I started over at #2, and this time it only took about half an hour. It showed the folders on the Time Capsule, I selected all of them, and clicked Transfer.
Almost immediately, it dove back into the welcome song! Now, for the third time, I'm at step #12. It's been over half an hour, and still no sign of hope. Just the progress bar checking for backups.
Would they have installed Snow Leopard on my Leopard machine? I definitely told them what I had been running, but it seems like a plausible reason for the hang-ups.
Any advice would be much appreciated, thanks!

Amenity wrote:
Almost immediately, it dove back into the welcome song! Now, for the third time, I'm at step #12. It's been over half an hour, and still no sign of hope. Just the progress bar checking for backups.
Connect to your Time Capsule via Ethernet if at all possible.
After booting from your Leopard Install disc and selecting Utilities, select +Disk Utility+ and see if it can find the +sparse bundle+ containing your backups on your Time Capsule. You may have to join the network, etc., via the Airport icon in the menubar. If you can get the sparse bundle to appear in Disk Utility's sidebar, select it and do a +*Repair Disk+* (not permissions) on it.
Would they have installed Snow Leopard on my Leopard machine? I definitely told them what I had been running, but it seems like a plausible reason for the hang-ups.
That's fairly likely; it happens a lot, probably because most folks have upgraded and installing SL has become a habit. But it shouldn't matter -- as long as you're using your Leopard Install disc, it should work fine. Once the restore actually starts, the first thing that happens is your internal HD is erased, and everything is restored from your backups.
It's also possible that whatever was going wrong on your internal HD corrupted something critical in your installation of OSX, and the corrupted stuff was backed-up, and that's what's giving TM a problem. If nothing else seems to help, try restoring from a previous backup.

Similar Messages

HT201250 existing Time Machine backups to a new Mac

how do i migrate existing time machine backups to a new mac from my time capsule?

It took a little more research, but that link in the end solved my problem. After mounting the Time Capsule and the previous backup sparsebundle, I ran these commands to inherit the old backup (with <capsule> and <machine> representing the names of the Time Capsule and machine/hard drive respectively:
          sudo tmutil inheritbackup /Volumes/<capsule>/<machine>.sparsebundle
          sudo tmutil associatedisk -a / /Volumes/Time\ Machine\ Backups/Backups.backupdb/<machine>/2012-12-09-114511/<machine>
          sudo tmutil setdestination /Volumes/<capsule>/
"2012-12-09-114511" was the latest snapshot that was there. According to the documentation, you can pick any snapshot, since the "-a" in that command will update all of the associated snapshots.

How to restore from a time capsule backup

Just wondering this - say my 27 inch iMac just died. But I was backing up to my Time Capsule. And then the next day I buy a new 27 inch iMac (same model HD space, etc OR maybe even greater and better). Can the new 27 inch iMac restore EVERYTHING to how it was from the original 27 inch imac? Would all my photos from iPhoto be restored? My music/movies from itunes?

Can the new 27 inch iMac restore EVERYTHING to how it was from the original 27 inch imac? Would all my photos from iPhoto be restored? My music/movies from itunes?
Yes.
An application called Setup Assistant will appear on the new iMac at startup to ask if you if want to setup the iMac from a Time Machine backup. The "new" iMac will look just like the "old" iMac when you do this.

Restoring from a Time Machine Backup on a new Hard drive

Hi,
I have a late 2009 iMac and I had the HD replaced (it was included in the recent HD recall).
Before I had it replaced, I made a backup using my time capsule and it was on the latest version of Mountain Lion.
My question is, since I have to install the OS using the original install discs which was Snow Leopard, if I use the restore from Time Machine using Mac OSX Utilities, will my Mac restore my Mountain Lion backup (and have everything like it used to before I had the HD replaced)? Or do I have to reinstall Lion then Mountain Lion then restore from there?
It would be a pain to re download everything.
Hope someone can help me out.
Thanks in advance

Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
You will find that Mountain Lion stores an invisible copy of the Recovery HD. You can boot from your Time Machine backup drive by restarting with OPTION boot:
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the "OPTION" key.
3. Release the key when the boot manager appears.
4. Select the disk icon for your Time Machine backup drive.
5. Click on the arrow button below the icon.
Your computer should boot into the Recovery HD. You will be presented with a main window of options. Select the option to restore from a Time Machine backup then click on the Continue button.

Going on using existing time machine backup in a new network

Hello community,
I just set up a wireless network with my new time capsule. As I used to do my time machine backups on an external USB hard drive (Intenso), I connected it to the TC for extending my network space and going on using this volume as my backup-volume.
Unfortunately Time Machine doesn't recognize the Intenso drive as my old backup volume although I did nothing else than plugging it into the TC instead of my Macbook. My Macbook is the same, the OS is the same, the backup drive is the same. Only the port is a different one. I cant understand that Time Machine doesn't recognize my backup only because its now in the wireless network instead of plugged to the USB port.
Is there anything I can do to make time machine going on using my old backup in the network?
Thanks a lot.
Fabian

Unfortunately Time Machine doesn't recognize the Intenso drive as my old backup volume although I did nothing else than plugging it into the TC instead of my Macbook.
Nothing is the same. There is a huge difference here depending on whether a hard drive is connected directly to a Mac......in which case it is a "local" drive.....or if a drive is connected to a device like the Time Capsule.....which is a "network" device.
In other words, if you connect a drive to the USB port on the Time Capsule, the drive becomes a "network" drive.
Time Machine stores backups differently depending on whether the drive is attached as a "local" drive or whether the drive will be connected as a "network" drive. On a "network" drive, Time Machine backups are stored in a special type of container called a sparsebundle.
You can set up Time Machine to back up to the drive connected to the Time Capsule.......but Time Machine will not continue to back up to the same file that was being used when the drive was connected directly to your Mac. Instead, Time Machine will make a new, complete backup and then continue to back up incrementally once the first "master" back up is done.
Obviously, this will require quite a bit more space on the hard drive, since you will have two sets of backups on the drive.
If you want to "see" the backups that were made when the drive was connected directly to your Mac, you will need to connect the drive directly to your Mac and access them that way.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

Cannot restore from Time Capsule backup wirelessly to Mountain Lion Retina

I just bought a new 15" MacBook Pro Retina Display and a Time Capsule router. The Time Capsule has supposedly backed up my macbook for a few days but when I try a complete restore from the Time Capsule backup wirelessly, it fails. New to Apple but do remember"can't access time capsule" even though network works fine.
Any help appreciated !!!

See p.4 here - http://www.pondini.org/TM/Time_Capsule.html - and see if the Great Pondoni can help.
He's sure helped others in the past...
Clinton

Can't Connect to My Time Capsule Backups, Please Help!!!

I have been using Time Machine/Time Capsule to back my data up for over a year. I bought a new MacBook Pro this morning. I did not want to use Migration Assistant to transfer everything over because there were many bugs and corruptions on my old disk and was scared that would all be transferred to my new machine. It was time for a fresh start.
I set up my new computer and transferred most of the files I needed via a flash drive. I am now trying to set up my MacBook Pro to connect to my Time Capsule backup disk via Time Machine, but once I enter Time Machine it does not allow me to go "back in time" to see all of my previous backups and restore points. There are some really important files I am trying to get to, but this computer isnt connecting to the Time Capsule backups. The old computer has already been completely reformatted, but it is still able to access the Time Capsule backups.
I have done some internet research and learned that Time Machine uses a computer's ethernet MAC address to allow access. There are some codes posted on various websites that allow to alter what Time Machine thinks you MAC address is so that you can access your backups with a new computer/different logic board. None of these Terminal workarounds worked for me. The Genius Bar and Apple Care couldn't help either.
I am hoping somebody can help me out. I understand I can use my old computer to get into Time Machine and retrieve what I need then transfer those to the new machine. But there must be a way to allow a new computer to fully access Time Capsule backups, but curiously, I can't find it. I rather have my new computer have full access because I am selling the old laptop and so I wont be able to use it to access my backups any longer.
Sorry for the long explanation, but I hope that gives someone all the facts required to both understand what I am saying and help me fix the problem.
-Amir

Right now it is just empty because I have unmounted and disconnected my Time Capsule. I'm trying a low-tech work around to see if this works, but much rather do it the "right way."
What I am doing is this:
(1) Use Migration Assistant to copy everything from the Time Capsule to the new machine (this is exactly what I was trying to avoid initially). Migration Assistant has been copying files for about 5 hours now (still not sure what is going to happen).
(2) Create a full backup on Time Capsule with my MacBook Pro now that it has everything from the Time Capsule on it.
(3) Do a fresh install of Snow Leopard.
(4) Hopefully, have the fresh start on my machine I wanted, but still have access to at least one archived copy of my old computer and files/folders.
Does this make sense? Basically, the new machine does not allow me to access the old backups. So I am handicapping the machine now by reverting to my old settings via Migration Assistant, will back that up, then start all over from scratch again but hopefully have the peace of mind that my files are not gone because I will at least have that one copy of all my old copies in a Time Capsule backup that the new machine can access.

Can I still use my "old" Mac after restoring Time Machine backup to a new Mac?

Hi guys.
Will I still be able to use my old Macbook Pro 2008 (Leopard) after restoring his latest Time Machine backup on a new Macbook Pro 2012 (Lion)?
Using Setup Assistant and transfering data using Time Machine creats the same Account on the new machine that was on the old one. I just don't know how the old machine will react towards his clone. I don't want to make a mess...
Please let me know.
Thanks

It should work if the drive is connected directly to your Mac. That is not the same as saying that it will work.
Since Mountain Lion was just released, it might make sense to hold on a few weeks and watch the forums for new and unforeseen issues before you dive in.

Problems with Full restore using Time Capsule backup???

For some reason my MacBook Pro recently crapped out completely, and I am trying to do a complete restore of the OS via a full backup I made with using Time Machine onto my Time Capsule disk, but I am running into some problems doing so and I was hoping someone might have some insight as to how I should deal with things at this point...
Here's where things get messy...
- I insert my Mac OS X 10.5 Installation DVD into my Macbook and boot from the drive, and I immediately choose the menu option to 'Restore from Time Capsule Backup'...
- After logging into my Time Capsule and then choosing the proper .sparseimage file to restore from, I click 'continue' and it brings me to the screen where I choose where I want to restore to (which in my case, is the one and only internal HD inside my Macbook Pro)
- The bottom of this window tells me that it's "Calculating space required to restore data..." but it simply hangs at the point with a spinning wheel indicating its still doing the calculating, but never actually presents me with the space required, not does it allow me to click continue to perform the restore?? I've allowed it over an hour to calculate the space required and it still just spins its status wheel...
This is where I am stuck at this point, and I have no idea how to get it to proceed to the next step to allow me to perform the restore??
Any suggestions would be greatly appreciated, as I will have no choice but to do a complete reinstall (including all apps and data) if I can't get the backup restored... Thanks!

I had the same problem when installing a new HDD in my Macbook. The solution I found was to reinstall Leopard onto the new HDD from the install CD, then reboot off the install CD once I had done this. I was then able to choose the 'Restore from Time Capsule' option and get my HDD to show up in the window.
A word of warning, once you have reinstalled Leopard and it starts asking you for all you info, as if for the first time to set up your computer, there is an option at the end of that process to restore your data from a Time Capsule backup. While this did restore all my files and so forth, it did not update any of the 'Apple' apps, i.e. iTunes, iPhoto, Quicktime, or the operating system itself, suggesting a 500Mb download via 'Software Update' to update the system. It was faster for me to reboot of the install CD and restore via the process outlines above. That way you get all your system updates included.
Not sure if this is the 'approved' method but it worked for me! The restore process took about 75 minutes for about 100Gb of data from my external backup drive connected to my Macbook via a Firewire cable.
Hope this helps!

Attempting to use Migration Assistant to restore a Time Capsule backup to a mounted partitioned drive?

Had a power surge and my Mac Pro did not fare well. Was able to boot from one of the drives in read only mode, so I did a Time Capsule backup of everything on the drive. Reinstalled Mountain Lion. Booted the computer up and am trying to use Migration Assistant to take the Time Capsule backup and restore it to the 1TB drive. When I use Migration Assistant, it says that there is not enough space on the drive to do the restore. I looked in Disk Utility and saw that the start up disk is another one of the 1TB drives with about 600GB used, therefore not enough space to do the restore. I want to restore to the original drive, but it says it is a "Mounted Partitioned Drive". Can I use Migration Assistant to restore a Time Capsule backup to this mounted partitioned drive?
Thanks in advance for any help - greatly appreciated.

I am not sure, never had to go there, I have multiple bootable clones of the system online and off, and a couple 1500VA/900W UPS units powering everything.
http://support.apple.com/kb/HT1427
http://www.recovermymac.co.uk/data-recovery/time-capsule-data-recovery/
This is a great article:
http://pondini.org/OSX/SetupLion.html
Most questions about TimeCapsule and TimeMachine are under Mac OS X forum as in -
https://discussions.apple.com/community/mac_os/os_x_mountain_lion#/?tagSet=1468

How do I restore notes from a time capsule backup in Yosemite?

All I want to do is restore previously deleted notes form a time capsule backup - something you could easily do in previous releases (I probably haven't tried this for a few years but it used to be really simple)

This procedure will revert the whole Notes database to a previous version. It's not possible to restore individual notes.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.Notes
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.apple.Notes" selected. Quit the application if it's running. Move the selected item to the Trash, then restore it from a backup that predates the unwanted change. If you back up with Time Machine, enter it and select the snapshot from which you want to restore.
Log out or restart and empty the Trash.
If you synchronize Notes with iCloud or another network service, the notes you restored may be immediately deleted after you restore them. In that case, temporarily disconnect from the Internet, for example by turning off your broadband adapter, and restore again. Copy the contents of each note to a document in another application, such as TextEdit. Reconnect to the Internet. If the notes are deleted, recreate them from the TextEdit document. They should then synchronize to the network.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Cannot find time capsule backup to restore

Hello - I have a MacMini (Intel Core 2 duo) runing OS 10.6.7. I used Time Machine to backup my data daily to a remote Time Capsule on my local network; I should also say at this point that I use Time Capsule to backup 4 machines in total. The hard drive crashed, and needed to be replaced. Now I am trying to restore my data to my computer. However, neither migration assistant nor time capsule can find the correct image (sparsebundle) to be mounted - for example, when I "Choose Time Machine Disk to Browse" no disks show up. Migration Assistant behaved a little differently, showing me 2 (out of 4) Time Capsule backups, but not the one relevant for this particular computer.
I know that backups have been performed, and I can manualy mount the specific Time Machine Backup through the finder - at which point I can "see" folders named "yyyy-mm-dd-xxxxxx," just as interesting is a file "yyyy-mm-dd-xxxxxxx.inProgress" - and which appears to be the latest date at which the folder was accessed. I have attached a screen shot of the contents of the folder.
Any thoughts? I really just need to restore the most recent backup, the rest are not necessary past this point.
Thanks!

Hi,
I just ran into the same problem, neither the Migration Assistant nor "Restore from Backup" from the 10.5 Install DVD would find a valid backup on my Time Capsule (which kinda renders it useless).
After some googling and trial and error I found a workaround using Terminal. I don't know why mounting the sparebundle image with Disk Utility wouldn't work, but it isn't available when your computer crashed anyway... So here is my method:
-Boot from the System DVD, choose the language
(-Goto Utilities and start the Disk Utility and reformat your drive, if on Intel check that you partition it with GUID, NOT Apple Partition Scheme NOR MBR, restart from DVD) only if something went wrong with your disk like in my case
-Goto Utilities and start Terminal
-In Terminal first make a directory for the mount, type: mkdir /Volumes/MyBackup
-Then mount the Time Capsule and link it to the folder you created, type: mount -t afp afp://myuser:mypassword@IPAdressOfMyTimecapsule/VolumeWhereMyBackupIs /Volume/MyBackup
-The AFP-Volume is now mounted, but you can't see anywhere.
-Quit Terminal, this will bring you back to the 10.5 Installer.
-Goto Utilities and choose "Restore System From Backup"
-The Dialog will ask you for a Backup Source. You should now see your Time Capsule and an already mounted Time Machine Volume at the location you specified in Terminal.
-Select the Time Machine Volume and press Continue, it'll take a while you show you all the backups, choose the one you want, choose a destination, drink tea.

Macbook air restored from time capsule backup cannot find ms office product key

Had a moisture problem on my Macbook Air. Had to replace with newer pc as could not wait a week for repair. Had been using Time Machine and a Time Capsule hard drive to back up and the final backup was about 5 minutes before the spill.
So, I was able to fully restore the new laptop from Time capsule. Only problem is that I had purchased MS Office and while the programs are restored, when I launch MS Word, it wants the product code. I cannot find my cd and packaging with the product code from my original purchase. Any way to get the code off the Time capsule backup? It must be stored there somewhere but I wonder if it was encrypted and somehow linked to a physical something on the damaged MBAir.
I'm hoping to not have to buy MS Office again.
Thanks for any advice.
JC

Here you go:
http://support.microsoft.com/kb/2279109

Restored system from Time Capsule but now lost access to the backup files

Last week, my drive flaked out and I had to restore my system from my Time Capsule. Now everything is back to normal except that I've noticed that upon trying to auto backup my Mac Pro, it says the disk is full. When I use Time Machine to access my old files, it appears I no longer have access to anything I had previous to restoring my system from my Time Capsule. I believe the link to the old backup file is broken and it's trying to create a new full backup file, in addition to keeping the old file.
Is this normal behaviour after a full restore from a Time Capsule or can I still somehow relink my computer to the file from which it was restored, and still have access to my backup files?

kencanuck wrote:
Last week, my drive flaked out and I had to restore my system from my Time Capsule. Now everything is back to normal except that I've noticed that upon trying to auto backup my Mac Pro, it says the disk is full.
Yes; everything you restored is treated as changed and will be backed-up again: http://support.apple.com/kb/TS1338 Time Machine most likely deleted all but the last backup, trying to make room for the new one.
When I use Time Machine to access my old files, it appears I no longer have access to anything I had previous to restoring my system from my Time Capsule.
Exactly how did you restore? Did you restore your entire system, starting with your Snow Leopard Install disc?
If you didn't, it's possible the account you're using is not recognized as the same one on your backups.
Can you see the last backup? If not, see #E2 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
Message was edited by: Pondini

Restoring an existing Time Capsule backup to a new HD

Similar Messages

Maybe you are looking for