Restoring backup in itunes fails- not enough space

After upgrading ios on my iphone 4s all contacts lost. Tried restoring from itunes only to get message "Can't restore...not enough space on iphone" when there is plenty. Have taken screen shot. Help. Spent several hours trying to find support for this. I'm new to communities so patience please.
This has really put me off switching to the Apple environment which I was considering doing. Think I'll go down the Google/Android/Samsung product route.

nutdrum wrote:
This has really put me off switching to the Apple environment which I was considering doing. Think I'll go down the Google/Android/Samsung product route.
Thanks for letting us know.
Good luck!

Similar Messages

  • Cannot restore backup to iphone because not enough space when i have 4 GB free?

    Everytime I try restoring my iphone from backup it never works properly. This time, I get an error message when trying to restore from backup that says I don't have enough space, but I have 4GB of free space left. Why is this happening?

    Hi ew11131,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/ts1503
    iPhone, iPad, and iPod: Understanding capacity
    http://support.apple.com/kb/ht1867
    Cheers,
    - Judy

  • HT5772 i can't restore my backup from my itunes cause not enough space on phone.

    i can't restore my backup from my itunes cause not enough space on phone.

    The thing is my disk C: only have 24G space. After backup only left 2G. Can i restore my iphone through different location such as my external hard disk? Can i copy the back up folder to my external hard disk then delete the one at C: ?

  • I recently took my imac in for a recall on the hard drive, they replaced my hard drive, i used time machine to restore all my files. Now when I turn time machine on it says back up failed not enough space, it is not overwriting old back ups.

    I recently took my imac in for a recall on the hard drive, they replaced my hard drive, i used time machine to restore all my files. Now when I turn time machine on it says back up failed not enough space, it is not overwriting old back ups. Why? Please help

    http://pondini.org/TM/FAQ.html

  • TS3682 i plug in my iphone 4 and i loss all contact... i try to backup restore but its error say not enough space.  please help me. i want only my contact backup restore not everything. so i dont know how can i do ?

    i plug in my iphone 4 and i loss all contact... i try to backup restore but its error say not enough space.  please help me. i want only my contact backup restore not everything. so i dont know how can i do ?

    Try to connect in recovery mode to restore, without using the latest backup, explained here:
    iOS: Unable to update or restore

  • Help: startup-config file open failed (Not enough space)

    Who can help me ? I've an uc500 and he stil running. Now i want to change something and want to save the configuration first. But the following message appears : startup-config file open failed (Not enough space)
    this is the output from a dir flash:
    Directory of nvram:/
      227  -rw-       25897                    <no date>  startup-config
      228  ----        1933                    <no date>  private-config
      229  -rw-       25897                    <no date>  underlying-config
        1  ----          83                    <no date>  persistent-data
        2  -rw-           0                    <no date>  ifIndex-table
        3  -rw-         577                    <no date>  IOS-Self-Sig#1.cer
        4  -rw-         615                    <no date>  IOS-Self-Sig#2.cer
        5  -rw-         660                    <no date>  vlan.dat
        6  -rw-         107                    <no date>  cca.xml
        7  -rw-         586                    <no date>  IOS-Self-Sig#3.cer
    262144 bytes total (227094 bytes free)

    OK.
    Try this:
    conf t
    service compress-config
    And see if that helps. 
    If not, see if you can tftp the running config off the router and TFTP it back to startup-config:
    copy run tftp
    copy tftp start
    Then you can try a reload and see if it is cured.
    I googled and found a few cases where alot of ACLs or NAT rules could cause MALOC errors (you would see those in your logs) when implemented and could manifest itself in this condition, which could be cured after the next reload, which is why I suggested that.
    Of course, dont be remote when you do this and only do it during a maintenance window.
    Steve

  • TS3992 My IPad states I have 4.1 GB available out of 5, but my IPad will not backup, says there is not enough space. What should I so.

    My IPad states I have 4.1 GB available out of 5, but my IPad will not backup, says there is not enough space. What should I do?

    You are looking at the amount of storage that you have available on the actual iPad (Settings > General > About > Available) and not the amount that you have in the cloud (Settings > iCloud) ?

  • HELP: ld: fatal: file /dev/zero: mmap anon failed: Not enough space

    Trying to build a debug version of our code using Solaris 10 and SunStudio 12, and we get this error:
    ld: fatal: file /dev/zero: mmap anon failed: Not enough space
    Any idea?
    The ld process grows to ~4GB then dies.
    The compile server has plenty of memory and swap available.
    Any idea? Our program is getting quite large, but I am sure there are larger ones out there.

    The only suggestion I have is to switch to stabs debug format (-xdebugformat=stabs compiler option) and don't specify -xs so that most of debug info is stored in .o files. Maybe it'll save some linker address space. Other than that, try asking on linker forum:
    http://www.opensolaris.org/jive/forum.jspa?forumID=63
    I know that it's a hot topic and you will probably get an answer as soon as someone from linker team take a look.

  • HT1766 How do I resolve the error "iTunes cannot restore backup because there is not enough free space on iPod"?

    I have an iPod touch 4th generation 8gb and im having a time zone issue on it, so I just backed up and I want to restore from backup. When I try to restore from backup it tells me that there is not enough space on  my ipod to restore backup. I have 687 mb free, how much space does it need? I dont want to restore then restore from backup in case something goes wrong like this and I have to start all over. Id rather have the time zone issue than an empty ipod. How do i resolve this? please help!

    Try moving/deleting from your iTunes libary apps and music which were on the iPod when the backup was made. When selecting apps,select the ones with app data that you can lose.

  • After accepting update to my time capsule, I can no longer complete a backup because there is not enough space.  I tried deleting old files, but it doesn't seem to work.  Any advice:

    My time capsule was updated through an apple download update on June 16, and now I cannot back up my computer.  The message is that there is not enough space.  I tried deleting my files, but it didn't help.  any suggestions?

    How much space is there according to airport utility?
    TM can be fussy.. Do a factory reset of the TC and give it a new name. Use short, no space and pure alphanumeric type names..
    And reset TM. See A4 here. http://pondini.org/TM/Troubleshooting.html
    Then set up TM again to the TC and see if TM will start .. the reset will not hurt the backup and TM can still find it on a renamed TC.

  • CAN NOT UPDATE AS ITUNES SAYS NOT ENOUGH SPACE ON PHONE

    wHEN TRYING TO SYNC WITH MY IPHONE  I GET A MESSAGE SAYING THAT THE PHONE COULD NOT BE UPDATED AS NOT ENOUGH SPACE FOR A 1.1 MB SYNC.I HAVE OVER 2.5 GB SPACE. BUT STILL WILL NOT UPDATE

    Hello Peter39,
    After reviewing your post, it sounds like the iPhone will not update because it needs more space available. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    If you need more space for an iOS update - Apple Support
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Kstat_lookup() failing: "Not enough space"

    Hi,
    I have a peculiar problem. I'm looking up CPU statistics using kstat(), and I'm getting a failure in kstat_lookup() on some machines.
    Here is the relevant code:
    kstat_ctl_t* pKstatCtl;
    kstat_t* pCpuStats;
    if ((pKstatCtl = kstat_open()) == NULL)
    // Handle error...
    if ((pCpuStats = kstat_lookup(pKstatCtl, NULL, -1, "cpu_stat0")) == NULL)
    // Handle error...
    ... // kstat_read(), etc.
    I am compiling this program on Solaris 2.6, and it works fine on every 2.6 machine I've used. It is interesting to note that, when I run "truss" on the program and watch the results of iostat(KSTAT_IOC_READ), it returns a number in the range of 600-800. I think this is the number of bytes read.
    When I run this program on a Solaris 2.8 machine (without recompiling it there, for reasons which are too complicated to explain here), it works most of the time. However, one of these 2.8 machines is having problems. The kstat_lookup() call fails, and strerror(errno) returns "Not enough space". Note that it's not the kstat_read() that's out of space, it's kstat_lookup(). I tried running the program on another 2.8 machine in the same cluster, and it worked. However, truss told me that ioctl(KSTAT_IOC_READ) was returning 264752.
    What's going on here? Why is kstat_lookup() failing with "Not enough space"? Why does this work on one machine and not another?
    Thanks,
    Chris

    Jason - the discs may be advertised as having 4.7GB of space, but in fact this is a bit of an urban legend - it all depends on how you count the bits, in groups of 1000 or in groups of 1024. Disc manufacturers like to count in 1000's, which gives a larger capacity, whereas your computer will count in groups of 1024...
    If you allow 4.37GB per disc, you'll be much nearer the mark.

  • Can't download itune movie, not enough space 6gig available?

    Can anyone help, I have approx 6 gig of space available, but I cannot download a movie I purchased from iTunes, I get the message not enough space available, use settings to manage?

    Both are true.
    Your have lost of iCloud space.
    The problem is you need space on the iPhone.
    On the iPhone
              Setting > General > Usage select Storage
    See what is taking up space on the iPhone.
             Delete what you don't need.

  • Migration assistant to copy from mac mini internal drive to second internal drive fails, 'not enough space'

    I have a 2011 mac mini and I just installed a second internal HDD using an OWC data doubler kit. So now I have two internal HDD.
    The original HDD is 750 GB and the new one is 1 TB. After the installation I manually formatted the 1 TB drive with one Mac OS Extended  (Journaled) partition.
    I then installed a fresh copy of Mavericks on the new 1 TB and during the installation tried to use Migration Assistant to move my user account over (mainly to get all the iTunes and iPhoto stuff).
    The original HDD 610 GB used, so 140 GB free.
    Migration Assistant correctly detects the original HDD but when I try to copy things over it says there is not enough space.
    Can anyone help me figure out what I need to do to get Migration Assistant to move my stuff from the original HDD over to the new one?

    I feel like such an idiot. I had manually tried to copy files over using the command line before I found out about the Migration Assistant tool. My manual copy had used up 500 GB.
    I deleted all of that and now I have no issues with the Migration Assistant.
    Sorry for taking your time!

  • Lion install fail - "not enough space" - I have over 90g...?

    Tried installing Lion from the app store on my Core 2 Duo iMac 2.4/1GB/250GB. Message says there is not enough space even though I have over 90gb on the hard drive. I repaired permissions, ran software update to make sure I was on the latest version of Snow Leapard...what gives? Any ideas?

    2.4/1GB/250GB - There's your problem. Lion requires 2GB ram, minimum.
    Frank
    Oops - 1 minute too late.

Maybe you are looking for

  • Problem creating unit testing repository (and workaround)

    I tried to create the unit testing repository with a user that had all the required system privileges granted through a different role other than RESOURCE and CONNECT roles, and who wasn't explicitely granted CREATE VIEW, but inherited it through the

  • Discoverer printing issues

    I must say, having tried to print a simple (nice looking) report in Discoverer desktop, plus, and viewer, I'm thoroughly disgusted with all 3. I've been told by Oracle to use Viewer to format and print reports, but I've run into a major bug that I'll

  • Addition of fields in a table/view

    Hi, We have a scenario where in there is a mismatch of the fields in development and production server. some  fields were added in production server which were not affected in development. we checked for the person who has changed that in production

  • Is installing Windows via bootcamp bad for my hardrive? (It crashed)

    Hello, I purchased my new Macbook Pro 13" in January of this year, and my hardrive recently completely crashed. I was lucky enough to have Apple pay for a new hd, but I really want to know what caused it. The only thing I can think of that makes any

  • Need Help With This Warning: after effects warning: unable to create font

    I have tried everything on evry site and forum, nothing seems to work. I installed the font verdana.ttf on my system and still I get this error. I used the Adobe clean up tool for CS5 and still received this error. I did a complete re-install and sti