Restoring backup not possible

Dear Apple
Restoring of my backup did not work because Itunes states that the computer doesnt have the autority.
I followed the following steps:
1. Autorizing my Imac again.
2. Take away the authority and try to autorize again.
3. updated Itunes
4. restart mac
5. step 1 and 2 again
6. Go to folder /users/shared/SC Info
7. removing folder
8. step 4 again
9. step 1 and 2 again.
But still no luck. My iphone is partially restored, but not completly. I never had problems before. What can it be?
Greetings Eline

N,
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.                        
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes       
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store        
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
You may be able to get some info from the restored iPod by:
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official     
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files      
-iPod touch Deleted Photo Recovery Tips You Should Know

Similar Messages

  • Problem with smart Playlist after Upadte to 10.6 - PLEASE UPDATE SOON, Backup not possible

    Apple, Apple, Apple... (again)
    Is it so difficult to let things, that are quite good, just there where they are??
    After updating my iTunes, OS Lion and some other stuff 2 days ago, I have now a big problem with a smart Playlist in iTunes 10.6. Before updating all things was right.
    The problem: Now, AFTER UPDATE, my Playlist ist totally empty!
    Before they were over 2000 songs in it.
    And because this is my major-smart-Playlist, which is established to my whole other Smart-Playlists, the other ones are also empty.
    And this is not the first time Apple.
    It´s good, if you - apple guys - just added something like new categories to sort of music (like "iCloud-Status" or some others).
    BUT WHAT DID YOU THINK, WHEN YOU DELETED THE OPTION "VALUATION" - mh??? (I hope in english this is the word that used in Itunes - my iTunes is in German)
    So I don´t mean the "lines" - I don´t know the right english word - when you see the music. There you can fade in "Album-Valuation" - new -  AND  "Valuation" - old.
    But I mean in the options of the smart-playlists - THERE ARE ONLY "Album-Valuation"!!!!! What the heck....
    EVERYONE NEEDS THE NORMAL Song-"Valuation" - and not the album (because normaly you decide by each track how good he is and not by the whole album).
    You can let the Album ones in it, BUT PLEASE BRING THE NORMAL ONE BACK.
    So, in my case, I tried to go back to iTunes 10.5.3 with my nice Time-Machine-Backup. So, but I couldn´t because there came a bug-message that said something like "It is not possible because OSX need the Programm".
    What is that?
    I also couldn´t delete the iTunes app from my app-folder.
    So, and now?
    I had to totally restore my volume !
    What is that for a solution?!
    So please think before you delete any functions, who is needed by many people.
    And if you did, maybe ask some users, that uses  for example smart-playlists alot, if there is a problem about some changes, you want to add.
    I hope anyone from Apple read this and also answer me. Because I´m upset about that.
    In every iTunes-Update I am concerned about what will be after the update.
    For example in the past, there was more than one changes in iTunes with the Valuation. First, there was just whole stars to set for every song. Than, after a long time, Apple decided to give the options for also half stars. So I said to myself - hey that´s great, that I don´t have to use external apps anymore to set these. So I did this to many of my songs (and that´s many).
    Than - after an Update - wow, all half stars rating are gone ! Great Apple, really great.
    I was VERY upset.
    So after an other update, the opportunity to give half stars are back.
    I thought, my god, it is so difficult to talk with other guys, that worked before on iTunes if I am new or just to look if there was already a change in that part of the app???
    So, apple guys, please don´t think that I want to attack you. But please be more carefull in the future. I hope that I don´t have to worry too much about so stuff. I really have better things to do with my time.
    So, have a nice weekend.
    Greetings from Germany.
    Marco Blum

    Hi..
    Use Lion Recovery  to reinstall the Mac OS X.

  • Time Machine Backup not possible (normal external Hard drive)

    Hi,
    has anyone else had the problem that after the Lion upgrade its not possible to even really access your external time machine?
    i have a 1TB Samsung HD103SI Media and when it tries to boot up it wont show in finder, i can see it in the disk drive utility and try to repair it but it only gets me an error saying i have to reformat that drive?
    i hope this can somehow be fixed otherwise all my backups are gone

    Hi,
    Sorry to hear about your Issue...
    Was your Samsung Formatted to Mac OS Entended (journaled) when you first started using it with TM...?
    If so see the Troubleshooting Section in this Link to Pondinis excellent Tips on Time Machine...
    http://web.me.com/pondini/AppleTips/Index.html
    Cheers,
    You may also find the TM references in this Link of Interest...
    http://web.me.com/pondini/AppleTips/LionChanges.html

  • Mistake 5000 Backup not possible

    When I sync my IPad 2 it appears a message: Backup was not possible because the computer couldn't save the Backup. The problem started when I updated Itunes to Version 10.5 and when I tried to update my IPad 2 to IOS 5.0. I had to stop the update and now I don't dare to do it in case I would lose all my APPs and other data on the IPad.

    Is my HD dying?
    Dead.

  • RNR. Backup not possible

    Hello
    I have a problem to finish any backup with RNR 4.52.0005. My laptop has two hard drives:
    - first: ssd, three partitions: system(C), lenovo recovery(G), some data(D)
    - second. hdd, one partition - data(E)
    I'm trying to backup only first drive with all partitions. Some time ago backup went to the end and the I got the message: Backup did not completed successfully. Last week I tried to reinstall RNR, and after that I cannot finish any backup: In the middle of backuping It's return backup was cancelled window.
    I always do backup to an external USB drive(H). Can anyone help me? Please check last part of rr.log file:
    Feb 21 22:32:51 In GetBackupFolderName, get local UUID!
    Feb 21 22:32:51 loadBackups() - will check file m_iLocation=1, szBackups=C:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common\backups.dat
    Feb 21 22:32:51 loadBackups() - can't found file m_iLocation=1, szBackups=C:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common\backups.dat
    Feb 21 22:32:51 LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Feb 21 22:32:54 Running: C:\Program Files (x86)\Lenovo\Rescue and Recovery\rrstrigger.exe -start
    Feb 21 22:32:55 Getting GUI mask is 16
    Feb 21 22:32:59 Running: C:\Program Files (x86)\Lenovo\Rescue and Recovery\rrstrigger.exe -start
    Feb 21 22:33:00 Getting GUI mask is 16
    Feb 21 22:33:02 C:\Program Files (x86)\Common Files\Lenovo\Scheduler\tvtschedinterface.dll
    Feb 21 22:33:02 g_pTVTSchedulerInterface is NULL!
    Feb 21 22:33:02 Mode is 8, day is 1, hour is 12, min is 0
    Feb 21 22:33:02 NULL path passed into GetBackupFolderName(TCHAR)
    Feb 21 22:33:08 letter =
    Feb 21 22:33:08 winClientIsUSBDrive begin
    Feb 21 22:33:08 winClientIsUSBDrive 1
    Feb 21 22:33:08 Get USB Drive message
    Feb 21 22:33:08 winClientIsUSBDrive 2
    Feb 21 22:33:08 winClientIsUSBDrive begin
    Feb 21 22:33:08 winClientIsUSBDrive 1
    Feb 21 22:33:08 Get USB Drive message
    Feb 21 22:33:09 winClientIsUSBDrive 2
    Feb 21 22:33:09 winClientIsUSBDrive begin
    Feb 21 22:33:09 winClientIsUSBDrive 1
    Feb 21 22:33:09 Get USB Drive message
    Feb 21 22:33:09 winGetDriveData find a (usb)
    Feb 21 22:33:09 Get USB Drive message(winServiceIsUSBDrive)
    Feb 21 22:33:09 winClientIsUSBDrive 2
    Feb 21 22:33:09 In GetBackupFolderName, get local UUID!
    Feb 21 22:33:09 H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9
    Feb 21 22:33:41 winClientIsUSBDrive begin
    Feb 21 22:33:41 winClientIsUSBDrive 1
    Feb 21 22:33:41 Get USB Drive message
    Feb 21 22:33:41 winClientIsUSBDrive 2
    Feb 21 22:33:41 winClientIsUSBDrive begin
    Feb 21 22:33:41 winClientIsUSBDrive 1
    Feb 21 22:33:41 Get USB Drive message
    Feb 21 22:33:41 winClientIsUSBDrive 2
    Feb 21 22:33:41 winClientIsUSBDrive begin
    Feb 21 22:33:41 winClientIsUSBDrive 1
    Feb 21 22:33:41 Get USB Drive message
    Feb 21 22:33:41 winGetDriveData find a (usb)
    Feb 21 22:33:41 Get USB Drive message(winServiceIsUSBDrive)
    Feb 21 22:33:41 winClientIsUSBDrive 2
    Feb 21 22:33:41 winClientIsUSBDrive begin
    Feb 21 22:33:41 winClientIsUSBDrive 1
    Feb 21 22:33:41 Get USB Drive message
    Feb 21 22:33:41 winClientIsUSBDrive 2
    Feb 21 22:33:41 winClientIsUSBDrive begin
    Feb 21 22:33:41 winClientIsUSBDrive 1
    Feb 21 22:33:41 Get USB Drive message
    Feb 21 22:33:41 winClientIsUSBDrive 2
    Feb 21 22:33:41 winClientIsUSBDrive begin
    Feb 21 22:33:41 winClientIsUSBDrive 1
    Feb 21 22:33:41 Get USB Drive message
    Feb 21 22:33:41 winGetDriveData find a (usb)
    Feb 21 22:33:41 Get USB Drive message(winServiceIsUSBDrive)
    Feb 21 22:33:41 winClientIsUSBDrive 2
    Feb 21 22:33:41 In GetBackupFolderName, get local UUID!
    Feb 21 22:33:41 H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9
    Feb 21 22:33:41 winClientIsUSBDrive begin
    Feb 21 22:33:41 winClientIsUSBDrive 1
    Feb 21 22:33:41 Get USB Drive message
    Feb 21 22:33:41 winClientIsUSBDrive 2
    Feb 21 22:33:41 winClientIsUSBDrive begin
    Feb 21 22:33:41 winClientIsUSBDrive 1
    Feb 21 22:33:41 Get USB Drive message
    Feb 21 22:33:41 winClientIsUSBDrive 2
    Feb 21 22:33:41 winClientIsUSBDrive begin
    Feb 21 22:33:41 winClientIsUSBDrive 1
    Feb 21 22:33:41 Get USB Drive message
    Feb 21 22:33:42 winGetDriveData find a (usb)
    Feb 21 22:33:42 Get USB Drive message(winServiceIsUSBDrive)
    Feb 21 22:33:42 winClientIsUSBDrive 2
    Feb 21 22:33:42 In GetBackupFolderName, get local UUID!
    Feb 21 22:33:42 H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9
    Feb 21 22:33:42 winGetDriveData find a (usb)
    Feb 21 22:33:42 In GetBackupFolderName, get local UUID!
    Feb 21 22:33:42 H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9
    Feb 21 22:33:42 loadBackups() - will check file m_iLocation=8, szBackups=H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common\backups.dat
    Feb 21 22:33:42 loadBackups() - can't found file m_iLocation=8, szBackups=H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common\backups.dat
    Feb 21 22:33:42 period is 24, dd is 1, ww is 0, hh is 12, mm is 0
    Feb 21 22:33:42 2015-02-01T12:00:42
    Feb 21 22:33:42 Send period ,value is 24
    Feb 21 22:33:42 Send day ,value is 1
    Feb 21 22:33:42 Send location ,value is 8
    Feb 21 22:33:42 Send size ,value is 19
    Feb 21 22:33:42 Send para ,value is 2015-02-01T12:00:42,size is 19
    Feb 21 22:33:42 SendData aborted. No pipe exists. len=1 msg[0]=11
    Feb 21 22:33:42 Get period from sender, value is 24
    Feb 21 22:33:42 Get day from sender, value is 1
    Feb 21 22:33:42 Get location from sender, value is 8
    Feb 21 22:33:42 Get buffer size from sender, value is 19
    Feb 21 22:33:42 Get para from sender, value is 2015-02-01T12:00:42
    Feb 21 22:33:42 C:\Program Files (x86)\Common Files\Lenovo\Scheduler\tvtsetsched.exe
    Feb 21 22:33:42 update task="LaunchRnR" trigger=RnRTrigger triggertype=monthly time=2015-02-01T12:00:42 day=1 action=RnRAction actiontype=exe argument="BACKUP location=U name="Scheduled" scheduled"
    Feb 21 22:33:42 Running: C:\Program Files (x86)\Common Files\Lenovo\Scheduler\tvtsetsched.exe update task="LaunchRnR" trigger=RnRTrigger triggertype=monthly time=2015-02-01T12:00:42 day=1 action=RnRAction actiontype=exe argument="BACKUP location=U name="Scheduled" scheduled"
    Feb 21 22:33:42 LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Feb 21 22:33:42 LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Feb 21 22:33:51 In GetBackupFolderName, UUID is 01ABDF1BC152CB11-B002E8DD874EC1F9!
    Feb 21 22:33:51 loadBackups() - will check file m_iLocation=1, szBackups=C:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common\backups.dat
    Feb 21 22:33:51 loadBackups() - can't found file m_iLocation=1, szBackups=C:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common\backups.dat
    Feb 21 22:33:51 In GetBackupFolderName, UUID is 01ABDF1BC152CB11-B002E8DD874EC1F9!
    Feb 21 22:33:51 In CreateSpecialBackupFolder, get szBackupFolder is C:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9
    Feb 21 22:33:51  CreateSpecialBackupFolder: szBackupFolder= C:\RRbackups, szMidiumFolder = C:\RRbackups\SZ
    Feb 21 22:33:51 Running: icacls "C:\RRbackups" /inheritance:r
    Feb 21 22:33:51 Running: icacls "C:\RRbackups" /grant:r *S-1-5-18OI)(CI)F /T /C
    Feb 21 22:33:51 icacls Legacy folder: C:\RRbackups\*
    Feb 21 22:33:51 icacls Legacy folder: "C:\RRbackups\SZ" /inheritance:d
    Feb 21 22:33:51 Running: icacls "C:\RRbackups\SZ" /inheritance:d
    Feb 21 22:33:51 Running: icacls "C:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
    Feb 21 22:33:51 Running: icacls "C:\RRbackups\SZ" /inheritance:d
    Feb 21 22:33:51 Running: icacls "C:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
    Feb 21 22:33:51 Running: icacls "C:\RRbackups" /remove *S-1-1-0
    Feb 21 22:33:51 Running: icacls "C:\RRbackups" /remove *S-1-5-32-544
    Feb 21 22:33:51 winClientIsUSBDrive begin
    Feb 21 22:33:51 winClientIsUSBDrive 1
    Feb 21 22:33:51 Get USB Drive message
    Feb 21 22:33:52 winClientIsUSBDrive 2
    Feb 21 22:33:52 winClientIsUSBDrive begin
    Feb 21 22:33:52 winClientIsUSBDrive 1
    Feb 21 22:33:52 Get USB Drive message
    Feb 21 22:33:52 winClientIsUSBDrive 2
    Feb 21 22:33:52 winClientIsUSBDrive begin
    Feb 21 22:33:52 winClientIsUSBDrive 1
    Feb 21 22:33:52 Get USB Drive message
    Feb 21 22:33:52 winGetDriveData find a (usb)
    Feb 21 22:33:52 Get USB Drive message(winServiceIsUSBDrive)
    Feb 21 22:33:52 winClientIsUSBDrive 2
    Feb 21 22:33:52 In GetBackupFolderName, UUID is 01ABDF1BC152CB11-B002E8DD874EC1F9!
    Feb 21 22:33:52 H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9
    Feb 21 22:33:52 winClientIsUSBDrive begin
    Feb 21 22:33:52 winClientIsUSBDrive 1
    Feb 21 22:33:52 Get USB Drive message
    Feb 21 22:33:52 winClientIsUSBDrive 2
    Feb 21 22:33:52 winClientIsUSBDrive begin
    Feb 21 22:33:52 winClientIsUSBDrive 1
    Feb 21 22:33:52 Get USB Drive message
    Feb 21 22:33:52 winClientIsUSBDrive 2
    Feb 21 22:33:52 winClientIsUSBDrive begin
    Feb 21 22:33:52 winClientIsUSBDrive 1
    Feb 21 22:33:52 Get USB Drive message
    Feb 21 22:33:52 winGetDriveData find a (usb)
    Feb 21 22:33:52 Get USB Drive message(winServiceIsUSBDrive)
    Feb 21 22:33:52 winClientIsUSBDrive 2
    Feb 21 22:33:52 In GetBackupFolderName, UUID is 01ABDF1BC152CB11-B002E8DD874EC1F9!
    Feb 21 22:33:52 H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9
    Feb 21 22:33:52 C:\Program Files (x86)\Common Files\Lenovo\Scheduler\tvtschedinterface.dll
    Feb 21 22:33:52 g_pTVTSchedulerInterface is NULL!
    Feb 21 22:33:52 Get back from GetTaskNextRunTime and return value is 0, next run time is 2015-3-1 12:0:42
    Feb 21 22:33:52 Set LOCAL to UUID and reload backup before delete backup!
    Feb 21 22:33:53 In GetBackupFolderName, get local UUID!
    Feb 21 22:33:53 loadBackups() - will check file m_iLocation=1, szBackups=C:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common\backups.dat
    Feb 21 22:33:53 loadBackups() - can't found file m_iLocation=1, szBackups=C:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common\backups.dat
    Feb 21 22:33:53 ServiceGetSecondDiskInfo nSize=10
    Feb 21 22:33:53 ServiceGetSecondDiskInfo can not get RR_REGKEY_BACKUP_SECOND_DRIVE_SER_NUM=BackupSecondDriveSerNum
    Feb 21 22:33:53 Enter FindLocalDrive
    Feb 21 22:33:53 ServiceGetSecondDiskInfo succeed  pDiskInfo.diskSN=HGSTHTS725050A7E630Size pDiskInfo[targetDiskcount].diskNum=1
    Feb 21 22:33:53 winGetDriveData find a (usb)
    Feb 21 22:33:53 FindSecondDrive succeed  rrDiskInfo.diskSN=HGSTHTS725050A7E630Size iBackupDrive=1
    Feb 21 22:33:53 GetSecondBackupfolder iBackupDrive=1 via FindSecondDrive
    Feb 21 22:33:53 findBackupOnDrive dwPartitions=0x10
    Feb 21 22:33:53 findBackupOnDrive every cLetter=E
    Feb 21 22:33:53 In GetBackupFolderName, get local UUID!
    Feb 21 22:33:53 In GetBackupFolderName, get local UUID!
    Feb 21 22:33:53 GetSecondBackupfolder via get largest letter letters=E iBackupDrive=1 letter=E dFreeG=329.4
    Feb 21 22:33:53 loadBackups() - will check file m_iLocation=32, szBackups=E:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common\backups.dat
    Feb 21 22:33:53 loadBackups() - can't found file m_iLocation=32, szBackups=E:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common\backups.dat
    Feb 21 22:33:54 winGetDriveData find a (usb)
    Feb 21 22:33:54 In GetBackupFolderName, get local UUID!
    Feb 21 22:33:54 H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9
    Feb 21 22:33:54 loadBackups() - will check file m_iLocation=8, szBackups=H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common\backups.dat
    Feb 21 22:33:54 loadBackups() - can't found file m_iLocation=8, szBackups=H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common\backups.dat
    Feb 21 22:34:00 Enter CSimpleProgressDlg() - Constructor().
    Feb 21 22:34:00 Exit CSimpleProgressDlg() - Constructor().
    Feb 21 22:34:00 LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Feb 21 22:34:00 Loc=8 NoPrimary=8
    Feb 21 22:34:00 UINT BackupThread(LPVOID pParam):
    Feb 21 22:34:00 winGetDriveData find a (usb)
    Feb 21 22:34:00 In GetBackupFolderName, UUID is 01ABDF1BC152CB11-B002E8DD874EC1F9!
    Feb 21 22:34:00 H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9
    Feb 21 22:34:00 loadBackups() - will check file m_iLocation=8, szBackups=H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common\backups.dat
    Feb 21 22:34:00 loadBackups() - can't found file m_iLocation=8, szBackups=H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common\backups.dat
    Feb 21 22:34:01 winGetDriveData find a (usb)
    Feb 21 22:34:01 In GetBackupFolderName, UUID is 01ABDF1BC152CB11-B002E8DD874EC1F9!
    Feb 21 22:34:01 H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9
    Feb 21 22:34:01 loadBackups() - will check file m_iLocation=8, szBackups=H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common\backups.dat
    Feb 21 22:34:01 loadBackups() - can't found file m_iLocation=8, szBackups=H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common\backups.dat
    Feb 21 22:34:02 winGetDriveData find a (usb)
    Feb 21 22:34:02 In GetBackupFolderName, UUID is 01ABDF1BC152CB11-B002E8DD874EC1F9!
    Feb 21 22:34:02 H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9
    Feb 21 22:34:02 winGetDriveData find a (usb)
    Feb 21 22:34:02 Running: C:\Program Files (x86)\Common Files\Lenovo\crmw.exe /hdd=2 /location=8
    Feb 21 22:34:08 CRMW - wmain will call  LaunchCRM()
    Feb 21 22:34:08 Running: C:\Program Files (x86)\Common Files\Lenovo\Python26\python.exe "C:\Program Files (x86)\Common Files\Lenovo\spi\setuphdd.pyc" /t 2
    Feb 21 22:34:08 SPI Test returned 5
    Feb 21 22:34:08 Running: C:\Program Files (x86)\Common Files\Lenovo\Python26\python.exe "C:\Program Files (x86)\Common Files\Lenovo\spi\setuphdd.pyc" /s 2 /n
    Feb 21 22:34:39 Pipe sent, current status is 8, and the current driver is C, the return value is 6
    Feb 21 22:34:39 BackupThread: Backup Object is RR_STATUS_RS_INITIALIZE_BACKUP_ENVIRONMENT
    Feb 21 22:34:39 Running: C:\Program Files (x86)\Common Files\Lenovo\msgbox.exe /t=56 /id=65 /wait
    Feb 21 22:34:39 In CreateSpecialBackupFolder, get szBackupFolder is H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9
    Feb 21 22:34:39  CreateSpecialBackupFolder: szBackupFolder= H:\RRbackups, szMidiumFolder = H:\RRbackups\SZ
    Feb 21 22:34:39 Running: icacls "H:\RRbackups" /inheritance:r
    Feb 21 22:34:39 Running: icacls "H:\RRbackups" /grant:r *S-1-5-18OI)(CI)F /T /C
    Feb 21 22:34:39 icacls Legacy folder: H:\RRbackups\*
    Feb 21 22:34:39 icacls Legacy folder: "H:\RRbackups\SZ" /inheritance:d
    Feb 21 22:34:39 Running: icacls "H:\RRbackups\SZ" /inheritance:d
    Feb 21 22:34:39 Running: icacls "H:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
    Feb 21 22:34:39 Running: icacls "H:\RRbackups\SZ" /inheritance:d
    Feb 21 22:34:39 Running: icacls "H:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
    Feb 21 22:34:39 Running: icacls "H:\RRbackups" /remove *S-1-1-0
    Feb 21 22:34:39 Running: icacls "H:\RRbackups" /remove *S-1-5-32-544
    Feb 21 22:34:39 Enter FindLocalDrive
    Feb 21 22:34:39 getting index is 1
    Feb 21 22:34:39 BackupThread Started.  There are 3 partitions to back up
    Feb 21 22:34:39 Pipe sent, current status is 10, and the current driver is C, the return value is 6
    Feb 21 22:34:39 BackupThread: Backup Object is RR_STATUS_RS_CAPTURE_SYSTEM_SETTING
    Feb 21 22:34:39 Get SMA flag is 5236752
    Feb 21 22:34:39 Running: C:\Program Files (x86)\Lenovo\Rescue and Recovery\instapps.exe /capture
    Feb 21 22:34:49 Pipe sent, current status is 40, and the current driver is C, the return value is 6
    Feb 21 22:34:49 Running: C:\Program Files (x86)\Common Files\Lenovo\msgbox.exe /exit
    Feb 21 22:34:49 Running: C:\Program Files (x86)\Lenovo\Rescue and Recovery\br_funcs.exe backup level=0 destination="H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\SP" drive=Z: location=8 nice=0 pw=0 uuid=0 compress encrypt
    Feb 21 22:34:49 Pipe sent, current status is 100, and the current driver is Z, the return value is 6
    Feb 21 22:34:49 The status value is 0, 1, 0, 0, 0x100 >?
    Feb 21 22:34:49 LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Feb 21 22:34:49 br_funcs returned error 0x58A
    Feb 21 22:34:49 Backup failed. Free Space High=0x000000E8 Low=0xBAC07000
    Feb 21 22:34:49 Get hidden partitions mask is 0
    Feb 21 22:34:49 Running: C:\Program Files (x86)\Lenovo\Rescue and Recovery\br_funcs.exe backup level=0 destination="H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9" drive=C: location=8 nice=0 pw=0 uuid=0 compress encrypt
    Feb 21 22:34:49 Pipe sent, current status is 100, and the current driver is C, the return value is 6
    Feb 21 22:34:49 The status value is 0, 1, 0, 0, 0x100 >?
    Feb 21 22:34:49 LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Feb 21 22:34:50 Pipe sent, current status is 80, and the current driver is C, the return value is 6
    Feb 21 22:34:50 The status value is -128, 0, 0, 0, 0x80 ?
    Feb 21 22:34:50 LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Feb 21 22:36:23 Pipe sent, current status is 1000, and the current driver is C, the return value is 6
    Feb 21 22:36:23 The status value is 0, 16, 0, 0, 0x1000 >?
    Feb 21 22:36:23 LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Feb 21 22:36:23 Get compress and encrypt flag in backup engine is 1
    Feb 21 23:25:19 LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Feb 21 23:25:19 LoadLibrary: Error 0 C:\Program Files (x86)\Lenovo\Rescue and Recovery\rr_res.dll
    Feb 22 00:01:42 In GetBackupFolderName, UUID is 01ABDF1BC152CB11-B002E8DD874EC1F9!
    Feb 22 00:01:42 In CreateSpecialBackupFolder, get szBackupFolder is C:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9
    Feb 22 00:01:42  CreateSpecialBackupFolder: szBackupFolder= C:\RRbackups, szMidiumFolder = C:\RRbackups\SZ
    Feb 22 00:01:42 Running: icacls "C:\RRbackups" /inheritance:r
    Feb 22 00:01:42 Running: icacls "C:\RRbackups" /grant:r *S-1-5-18OI)(CI)F /T /C
    Feb 22 00:01:42 icacls Legacy folder: C:\RRbackups\*
    Feb 22 00:01:42 icacls Legacy folder: "C:\RRbackups\SZ" /inheritance:d
    Feb 22 00:01:42 Running: icacls "C:\RRbackups\SZ" /inheritance:d
    Feb 22 00:01:42 Running: icacls "C:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
    Feb 22 00:01:42 Running: icacls "C:\RRbackups\SZ" /inheritance:d
    Feb 22 00:01:42 Running: icacls "C:\RRbackups\SZ" /grant:r *S-1-1-0OI)(CI)F /T /C
    Feb 22 00:01:42 Running: icacls "C:\RRbackups" /remove *S-1-1-0
    Feb 22 00:01:42 Running: icacls "C:\RRbackups" /remove *S-1-5-32-544
    Feb 22 00:01:53 LoadLibrary: Error 203 C:\Program Files (x86)\Common Files\Lenovo\rr_res.dll
    Feb 22 00:01:53 Get the shutdown flag from service is 0
    Feb 22 00:01:53 Start to kill rnr_gui.exe after backup in simple_gui.
    Feb 22 00:02:45 Running: C:\Program Files (x86)\Common Files\Lenovo\msgbox.exe /exit

    Windows 7 PRo 64 bit SP 1
    All visual C++ version I have in stalled:
    Engine Log:
    Sat Feb 21 20:23:37 2015 Engine: br_funcs.exe - version is '04.34.37.00'
    Sat Feb 21 20:23:37 2015 Verbatim: WriteDriveContents(DriveLetter='Z:', Dest='H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\SP', Level=0, SleepCount=0, DeviceType=8, dwOptFlags=0x00000001)
    Sat Feb 21 20:23:37 2015 SHADOW: Shadow called
    Sat Feb 21 20:23:37 2015 SHADOW: Error when DoSnapshotSet completed - dwRet = 0x000005a9 - hrRet = 0x8004231f
    Sat Feb 21 20:23:37 2015 SHADOW: Shadow exits with dwRet = 0x000005a9
    Sat Feb 21 20:23:37 2015 Engine: CreateShadowCopy fails - 'c:\program files (x86)\lenovo\rescue and recovery\shadow.exe create volume=Z: identifier=br_funcs directory=Z:\A' returned 0x000005a9 - dwRet = 0x0000058a
    Sat Feb 21 20:23:37 2015 Verbatim: WriteDriveContents exiting with return code 0x0000058a
    Sat Feb 21 20:23:37 2015 Engine: br_funcs.exe - version is '04.34.37.00'
    Sat Feb 21 20:23:37 2015 Verbatim: WriteDriveContents(DriveLetter='C:', Dest='H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9', Level=0, SleepCount=0, DeviceType=8, dwOptFlags=0x00000001)
    Sat Feb 21 20:23:37 2015 SHADOW: Shadow called
    Sat Feb 21 20:23:37 2015 SHADOW: Attempting to expose copy as 'C:\A'
    Sat Feb 21 20:23:38 2015 SHADOW: Shadow exposed as 'C:\A\'
    Sat Feb 21 20:23:38 2015 SHADOW: Shadow exits with dwRet = 0x00000000
    Sat Feb 21 20:25:10 2015 Verbatim: 0x0000001bd1f218d9 - Space required before compression
    Sat Feb 21 20:25:10 2015 Verbatim: 0x00000016459cc525 - Estimated space required after compression
    Sat Feb 21 20:25:10 2015 Verbatim: 0x000000e8ba860000 - Disk space currently available
    Sat Feb 21 21:21:18 2015 Verbatim: Unable to record short name for 'C:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\Documents and Settings\ReportServer$MAN\AppData\Roaming\Microsoft\Crypto\RSA\S-1-5-80-568852538-3437207580-3119479603-2336234615-2537294246\84f0d382340d44d4bf284049d1c539bf_cff53414-f86b-4b90-82ea-63b0436f63cd' - WinRC = 0x00000003
    Sat Feb 21 21:21:18 2015 Engine: Unable to record attributes for file 'C:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\Documents and Settings\ReportServer$MAN\AppData\Roaming\Microsoft\Crypto\RSA\S-1-5-80-568852538-3437207580-3119479603-2336234615-2537294246\84f0d382340d44d4bf284049d1c539bf_cff53414-f86b-4b90-82ea-63b0436f63cd' - WinRC = 0x00000003
    Sat Feb 21 21:36:24 2015 Verbatim: Unable to record short name for 'C:\Users\T530\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\7B5R1PGG\src=4336383;met=1;v=1;pid=112046387;aid=285040618;ko=0;cid=59557278;rid=59446154;rv=1;&timestamp=1414205667987;eid1=536393;ecn1=1;etm1=0;eid2=2;ecn2=1;etm2=10;[1].gif' - WinRC = 0x00000003
    Sat Feb 21 21:36:24 2015 Engine: Unable to record attributes for file 'C:\Users\T530\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\7B5R1PGG\src=4336383;met=1;v=1;pid=112046387;aid=285040618;ko=0;cid=59557278;rid=59446154;rv=1;&timestamp=1414205667987;eid1=536393;ecn1=1;etm1=0;eid2=2;ecn2=1;etm2=10;[1].gif' - WinRC = 0x00000003
    Sat Feb 21 21:36:24 2015 Engine: CreateFileW failed for file 'C:\Users\T530\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\7B5R1PGG\src=4336383;met=1;v=1;pid=112046387;aid=285040618;ko=0;cid=59557278;rid=59446154;rv=1;&timestamp=1414205667987;eid1=536393;ecn1=1;etm1=0;eid2=2;ecn2=1;etm2=10;[1].gif' and the reason was not a sharing violation - Windows RC = 0x00000003
    Sat Feb 21 21:58:15 2015 Engine: WriteFileInfo Unable to perform backup - unable to reget g_hHashFile H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\C\0\HashFile - dwRet = 0x00000000 - WinRC = 0x00000037
    Sat Feb 21 21:58:15 2015 Verbatim: WriteDriveContents exiting with return code 0x0000054a
    Sat Feb 21 21:58:16 2015 SHADOW: Shadow called
    Sat Feb 21 21:58:17 2015 SHADOW: Shadow exits with dwRet = 0x00000000
    Sat Feb 21 22:33:51 2015 Engine: br_funcs.exe - version is '04.34.37.00'
    Sat Feb 21 22:33:51 2015 Engine: CopySAM called with pwszDestination='C:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\common'
    Sat Feb 21 22:33:51 2015 SHADOW: Shadow called
    Sat Feb 21 22:33:53 2015 SHADOW: Attempting to expose copy as 'C:\A'
    Sat Feb 21 22:33:53 2015 SHADOW: Shadow exposed as 'C:\A\'
    Sat Feb 21 22:33:53 2015 SHADOW: Shadow exits with dwRet = 0x00000000
    Sat Feb 21 22:33:53 2015 SHADOW: Shadow called
    Sat Feb 21 22:33:53 2015 SHADOW: Shadow exits with dwRet = 0x00000000
    Sat Feb 21 22:33:53 2015 Engine: CopySAM exiting with dwRet = 0x00000000
    Sat Feb 21 22:34:49 2015 Engine: br_funcs.exe - version is '04.34.37.00'
    Sat Feb 21 22:34:49 2015 Verbatim: WriteDriveContents(DriveLetter='Z:', Dest='H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\SP', Level=0, SleepCount=0, DeviceType=8, dwOptFlags=0x00000001)
    Sat Feb 21 22:34:49 2015 SHADOW: Shadow called
    Sat Feb 21 22:34:49 2015 SHADOW: Error when DoSnapshotSet completed - dwRet = 0x000005a9 - hrRet = 0x8004231f
    Sat Feb 21 22:34:49 2015 SHADOW: Shadow exits with dwRet = 0x000005a9
    Sat Feb 21 22:34:49 2015 Engine: CreateShadowCopy fails - 'c:\program files (x86)\lenovo\rescue and recovery\shadow.exe create volume=Z: identifier=br_funcs directory=Z:\A' returned 0x000005a9 - dwRet = 0x0000058a
    Sat Feb 21 22:34:49 2015 Verbatim: WriteDriveContents exiting with return code 0x0000058a
    Sat Feb 21 22:34:49 2015 Engine: br_funcs.exe - version is '04.34.37.00'
    Sat Feb 21 22:34:49 2015 Verbatim: WriteDriveContents(DriveLetter='C:', Dest='H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9', Level=0, SleepCount=0, DeviceType=8, dwOptFlags=0x00000001)
    Sat Feb 21 22:34:49 2015 SHADOW: Shadow called
    Sat Feb 21 22:34:49 2015 SHADOW: Attempting to expose copy as 'C:\A'
    Sat Feb 21 22:34:49 2015 SHADOW: Shadow exposed as 'C:\A\'
    Sat Feb 21 22:34:49 2015 SHADOW: Shadow exits with dwRet = 0x00000000
    Sat Feb 21 22:36:23 2015 Verbatim: 0x0000001bd9938c93 - Space required before compression
    Sat Feb 21 22:36:23 2015 Verbatim: 0x000000164d0676b8 - Estimated space required after compression
    Sat Feb 21 22:36:23 2015 Verbatim: 0x000000e8bac07000 - Disk space currently available
    Sat Feb 21 23:31:45 2015 Verbatim: Unable to record short name for 'C:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\Documents and Settings\ReportServer$MAN\AppData\Roaming\Microsoft\Crypto\RSA\S-1-5-80-568852538-3437207580-3119479603-2336234615-2537294246\84f0d382340d44d4bf284049d1c539bf_cff53414-f86b-4b90-82ea-63b0436f63cd' - WinRC = 0x00000003
    Sat Feb 21 23:31:45 2015 Engine: Unable to record attributes for file 'C:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\Documents and Settings\ReportServer$MAN\AppData\Roaming\Microsoft\Crypto\RSA\S-1-5-80-568852538-3437207580-3119479603-2336234615-2537294246\84f0d382340d44d4bf284049d1c539bf_cff53414-f86b-4b90-82ea-63b0436f63cd' - WinRC = 0x00000003
    Sat Feb 21 23:46:30 2015 Verbatim: Unable to record short name for 'C:\Users\T530\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\7B5R1PGG\src=4336383;met=1;v=1;pid=112046387;aid=285040618;ko=0;cid=59557278;rid=59446154;rv=1;&timestamp=1414205667987;eid1=536393;ecn1=1;etm1=0;eid2=2;ecn2=1;etm2=10;[1].gif' - WinRC = 0x00000003
    Sat Feb 21 23:46:30 2015 Engine: Unable to record attributes for file 'C:\Users\T530\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\7B5R1PGG\src=4336383;met=1;v=1;pid=112046387;aid=285040618;ko=0;cid=59557278;rid=59446154;rv=1;&timestamp=1414205667987;eid1=536393;ecn1=1;etm1=0;eid2=2;ecn2=1;etm2=10;[1].gif' - WinRC = 0x00000003
    Sat Feb 21 23:46:30 2015 Engine: CreateFileW failed for file 'C:\Users\T530\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\7B5R1PGG\src=4336383;met=1;v=1;pid=112046387;aid=285040618;ko=0;cid=59557278;rid=59446154;rv=1;&timestamp=1414205667987;eid1=536393;ecn1=1;etm1=0;eid2=2;ecn2=1;etm2=10;[1].gif' and the reason was not a sharing violation - Windows RC = 0x00000003
    Sun Feb 22 00:01:40 2015 Engine: WriteFileInfo Unable to perform backup - unable to reget g_hHashFile H:\RRbackups\SZ\01ABDF1BC152CB11-B002E8DD874EC1F9\C\0\HashFile - dwRet = 0x00000000 - WinRC = 0x00000037
    Sun Feb 22 00:01:40 2015 Verbatim: WriteDriveContents exiting with return code 0x0000054a
    Sun Feb 22 00:01:41 2015 SHADOW: Shadow called
    Sun Feb 22 00:01:41 2015 SHADOW: Shadow exits with dwRet = 0x00000000

  • Restart, reset, backup not possible

    I upgraded from lion to mountain lion online this week. Itunes and safari crashed since then several times. I then used the harddrive aid prog. to repair seemingly existing acces problems. Crashd again. Now nothings working anymore. If i start, either the logo and a panic (caller) message show up, or a blinking folder with a question mark or the screen, or it  just stays annoyingly blank (which usually is the case).. Appearently i tried to backup from a externa (with osx lion on it from before upgrading) but backup  only started once and then looped time to about 5y 230d remaining install time at 73.3%. I restartet, now nothing happens no more. If i even get to the point that it shows me to select either to do backup, reinstalllion etc( one out of 20itmes) it does not find the interna mac Hdrive to do the backup... Or other stuff. In All other cases it endless- circles with restarting the system automatically, or again, blank.
    Short keys to reinstall from store won't work, nor restarting with or without the externa, nor did threatening the keyboard or screaming at the logo...
    Any ideas what it might be?
    Is my HD dying?
    A big thank you from switzerland
    Andy

    Is my HD dying?
    Dead.

  • Restoring backup not working

    I recently made a backup of all my photos to an external hard drive.  When I went into Photoshop to work with some photos in editor, I receive the message that files are missing.  I try to restore the back up from the external hard drive and photoshop becomes unresponsive and I have to force quit.  Please help, new to Photoshop and I'm afraid I've lost all of my photos!!!!

    dherolt wrote:
      Please help, new to Photoshop and I'm afraid I've lost all of my photos!!!!
    Don't panic !
    There is no necessary reason you have lost your photos.
    We need some details of what you have done.
    First, which Elements version ?
    When you had the message there were missing files, was there only some, or many, or all files missing ?
    Do you remember moving, deleting or renaming files or folders ? (It's easy to do so without noticing it when working in the explorer.)
    About your backup : was it made from the organizer menu, or with an external software ?
    Did you try the option to repair and optimize the catalog before trying to restore ? That can help, and does no harm.

  • I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your

    I have install last update for i pod(ios5) but during installation there was one problem....i have restore my ipod and now i have lost all my buyed music!!Is not possible download it....?What are the details, including any error messages, related to your question?

    Have you not got the music on your computer and/or on backups on, for example, external drives or CDs/DVDs ?

  • Backup of mirrored database is not possible?

    Hi Please correct me,
    backup of mirror database is not possible right?
    Thanks
    Shashikala
    Shashikala

    Hi Shashikala,
    While a database mirroring session is active, the mirror database is in a recovering state and it is not accessible. Thus as Ashwin’s post, backup and restore of the mirror database is not allowed. In addition, you need to note the following things:
    •Backup of the principal database is allowed, but BACKUP LOG WITH NORECOVERY is not allowed.
    •Restoring the principal database is not allowed.
    For more information, you can review this article:
    Database Mirroring and Backup and Restore.
    Thanks,
    Lydia Zhang

  • Elements 10 backup from XP - restore to W7 - restore does not include any duplicated pics

    Hi,  hope someone can help?
    I am a new user to Elements10 and originally installed it onto an XP desktop.    I have since upgraded the desktop to Windows7 and want to transfer my images and elements catalog.  I have performed a full backup of my catalog from the XP os, via the backup process in Elements (which says successful) and performed a restore onto the W7 desktop retaining the original folder structure (also via Elements).  
    Despite doing this several times, I always get error messages saying the restore cannot restore a selection of .xml files, but if I continue with the backup it finally says "successful".
    However when I compare the number of restored images, with the originals, it appears I am over 700 files short!       A bit of investigation indicates that the restore is not restoring any duplicate images (those with identical file names but in different folders), but only restores one copy of the image.    I can't check all 700 files individually, but can someone confirm if this expected behaviour, so that I can stop worrying that I have lost 700+ images?
    Thanks
    Steve

    stevew218 a écrit:
    Ah... as per my 1st post, I am a new user to Elements.    Apologies,  I have been approaching this from the wrong direction!   I have checked back on my original XP disk and Elements catalog, and it appears that when I set up the original catalog against my existing pics it did not include any duplicate files, therefore the Backup\Restore is correct, it is the original cataloging of my pictures that did not work as expected.     Do I have to do anything specific to get the catalog to include duplicate file names?
    Sorry for the misdirection
    Steve
    Steve,
    The basic rule of database management is to forbid duplicates.
    In the case of the Organizer, that would mean changing one of the two above criteria (date daken or file size in kB). That would be possible outside of the Organizer by using external tools, but the problem is that you don't know which files are concerned...
    Now that you have restored your catalog in your new catalog, a theoretical solution would be to get back to the old catalog, and use the organizer to delete all the files in the catalog. The remaining ones would be the duplicates. Creating a new empy catalog and importing the remaining files would recover all duplicates. You could then restore on the new PC.
    There are still two problems:
    - You can't delete a big number of files at the same time? You'd have to delete by small batches
    - You'll have all your duplicates in your new PC, but you still won't be able to include them in the main catalog even you have now a special catalog with only the duplicates.
    So, the final question may be : why do you want to keep duplicates? You can examine the duplicates catalog and see if they are really necessary. Maybe you can live with two different catalogs.

  • Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

    Not able to sign into Blackberry Protect.  Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID."  My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone.  I can sign into Link, Blackberry.com and Protect.  I see my device in Protect but cannot send messages or view it on a map.  Times out with cannot reach device message.  BB Protect on Device has a swirling circle beside the on/of switch.  Cannot turn off.  
    I have deleted Link and re-installed.
    I have reset phone to default(factory) and signed in. 
    OS level is 10.2.1.3062
    BB Link is 1.2.3.56
    Solved!
    Go to Solution.

    I managed to figure this out myself. I had to delete the device from the Blackberry Protect website.  protect.blackberry.com.  I wiped my device again and signed in with my Blackberry ID.  I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete.  Restore is in progress for me!

  • I changed my iPhone lately but i can't restore my last backup since it keeps saying "itunes could not restore backup because the password was incorrect" but I don't know where to put the password to make it happen... Any suggestions?

    Hey guys,
    I just bought a new iPhone but i can't restore my backup files beacuse it keeps saying "itunes could not restore backup because the password was incorrect" but I really don't know where to put the password to restore it. I really have some files that are meaningful for me so I really need help. Any suggestions anyone?

    Select your iDevice in the iTunes.
    Choose the Summary screen (tab) and scroll to the bottom of the screen.
    Then un-select Encrypt iPhone backup.
    iTunes will then prompt you to “Enter the password to unlock your iPhone backup”, enter the password you set originally.

  • My question is about the 'Restore Backup' option on iTunes (Not 'Restore iPhone'). So, if I click on Back Up Now, then 'Restore Backup', would that go through the process of erasing everything on my phone as new then restore whatever iTunes has backed up?

    My question is about the 'Restore Backup' option on iTunes (Not 'Restore iPhone'). So, if I click on Back Up Now, then 'Restore Backup', would that go through the process of erasing everything on my phone as new then restore whatever iTunes has backed up?
    I do not want this to happen, as with previous experience iTunes doesn't restore a mirror of what the iPhone was when it was backed up as is the case with iCloud backups.
    What I am trying to do is, as I've found a method on Youtube, there is an application where I can delete all the multimedia saved in my 'iMessages' so clear up some space. As doing that manually through the phone would take a lifetime. The method is to backup on iTunes, then using the backup created, importing that into the application then deleting the messages through that then restoring the phone using that amended backup.
    So back to my question, would restoring through 'Restore Backup' just restore the backup internally or would it flush the entire phone and then restore the backup? And if it does so, what would be lost in the restore?
    Thank you all,
    Fahmid

    iCloud should overwrite your phone with the data stored in your account, preserving your newer data.  However, to be sure I would go to Settings>iCloud and turn data syncing to Off before restoring the backup.  Then, after restoring the backup, turn the data syncing back to on, and when prompted about Merging with iCloud, choose Don't Merge.  This will ensure that the data in your iCloud account overwrites the data on your phone (which is your goal).
    Also, you don't sync text messages with iCloud so you will end up losing your more recent messages when they are overwritten by the backup.

  • After restoring backup new macbook with time machine Firefox will not start. says missing profile

    after restoring backup on new macbook with time machine Firefox will n to start. It says it is missing profile although profile exists and profile manager will not start. Also reinstalling does not help. Direct after starting Firefox it says profile is missing and then quits Firefox. Please help edit

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    * https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • I want to do a factory restore on my iphone 4s but I do not want to the iOS6. If I back up, can then restore backup and keep iOS5 since a factory restore will automatically upgrade me?

    I want to do a factory restore on my iphone 4s but I do not want to the iOS6. If I back up, can then restore backup and keep iOS5 since a factory restore will automatically upgrade me?

    Found the answer myself. Thanks for the help!

Maybe you are looking for