Restoring clients after homogeneous copy

Hi...
I have a QAS system with three clients (100, 120 and 200).
I have a PRD system with just the client 100.
I was asked to perform an homogeneous copy from PRD to QAS, but to make sure clients 120 and 200 are not destroyed.
My question is:
Would a client export (SCC8) with profile SAP_RECO solve my problem?
I would first export both clients (120 and 200) with SAP_RECO, using the QAS system as the target, perform the copy, and then import the clients again through STMS. Would this work? Or is there any other way of doing this?
thanks
Antonio

Hi Antonio
If your are performing the system copy from PRD to QAS its will be comes only 100 client.
for this kindly follow the steps
1. Before starting the system copy Export the QAS client  120 & 200.
2. Perform the system copy from PRD to QAS, & Post system copy activitys
3. Create the New clients in QAS system
4. Do the Import which you already performed
BR
SS

Similar Messages

  • Transports steps after Homogeneous Copy

    I'm planning to do a system copy in a few weeks time.  I have done dummy runs and all is fine, but i'm unsure about the steps that are required for the transpors after the live copy.
    The installation notes are very vague on this front.  Is it just a case of running se06, or do I need to set up the transports domain again etc??
    Thanks
    Ian

    You've probably already thought of this, but just as a reminder:
    1) you'll have to log onto client 000 and request to be added back to the Transport domain, then activate the request on the Domain Controller (tcode stms)
    2)Applied transport request level may be different between your QA & Prod. I usually down load the E070 table of QA before the refresh and compare it to the a download after the restore. Then manually add the transports to bring QA back to the transport level is was before the refresh. (May not be a concern in your landscape)

  • Is Recovery  possible after homogeneous copy

    Hi all,
                 my database is oracle 9i
    1.I have 20 days old backup.using this backup I created a new system(by homogeneous system copy).Can I recover database using offline redolog files up to today date?
    Thanks in advance
    Regards
    nani

    yes it is possible, but you may need to rename your offline redologs so that it contains the SID.
    20 days of redologs is a lot. hopefully, you have all offline redologs available and hopefully, you do not have any corrupted files...
    it is better to take daily backups.

  • Which is better Remote Client Copy or Homogenous copy

    Hi All
    I have a task to synchronize the ECC Production server with devlopment server
    For this I have two option :
    1. Remote client copy from Production to Development
    2. Implementing homogenous copy(oracle procedure) of production server and then remove the existing development server.
    I want to know your expert view with which one should I go with, as I have seen many times that whenever I do remote client copy it gives error in test phase the following tables error. so I am not sure wherther I just go with clent copy or not.
    What things should keep in mind before doing it before doing homogenous copy?
    Thankx in Advance
    Regards
    Vinay Paul

    Hi All
    Is there any solution for below if I decide to go with Oracle Procedure of system copy. Because we have to provide this to one of our client as there production and Development server are out of Sink.
    1. Retaining the development history
    2. Retaining the transports history.
    I came to know that the above thing is possible but I have no idea how.
    Thankx in advance
    Regards
    Vinay Paul
    Edited by: Vinay Paul on Jan 16, 2008 1:48 PM

  • Problems Delta Extractor after Homogeneous Source System Copy

    Hi,
    We have R/3 system landscape HUD, HUQ, HUP. And we have BW system landscape BWD and BWP.
    We connect BWD to HUQ and BWP to HUP.
    We made a homogeneous system copy from HUP to HUQ.
    We haven´t made any homogeneous system copy from BWP to BWD.
    We have applied the next OSS note after source system copy:
    325525 Copying and renaming systems in a BW environment
    184322 Procedure after DB copy of BW source system
    184754 Procedure after BW database copy.
    But we have problems in our BW Development (BWD), and we have the next Dump "MESSAGE_TYPE_X" when we can change any delta infopacket, the next text are from Dump:
    "MESSAGE_TYPE_X" C        
    "SAPLRSS1 " or "LRSS1F11 "
    "RSM1_CHECK_FOR_DELTAUPD" 
    I think that the problem is about inconsistencies between RSSDLINIT/SEL tables in BW side and ROOSPRMSC/F tables in R/3 side.
    Please could you tell how can i solve this Dump, because i can restrart and initial and delta packet for different Datasource and i can´t do anything.
    Thanks in advanced,

    Hi,
    We are upgrading our R/3 system from 4.7 to Ecc 6.
    While copying database tables we are using Clinet Carrier tool which is considering only clinet dependent tables. Hence we are loosing our BW delta queue entries in RSA7 of ugraded system.
    We found ROOSPRMSC and ROOSPRMSF tables and copying these 2 tables may resolve the issue and We copied and delta went fine.But we are not sure of only these are the tables to be considered.
    Please let us know what are the relevent tables to be considered to make the Delta to work while copying Data base tables from one system to another.
    Thanks in Advance
    Regards,
    R@ngzz

  • Does iPhoto not have safeguards against accidentally deleting an entire photo book, which is very easily done (when you think you are deleting just a photo)? No "are you sure you want to delete?". No way of copying your book before, or restoring it after?

    Does iPhoto not have safeguards against accidentally deleting an entire photo book, which is very easily done with a single press of delete (and which can be done when you think you are deleting just a photo)? No "are you sure you want to delete?" before it happens? No way of copying your book while you are working on it (to make multiple versions of it, or just to have a safeguard copy), and no real way of restoring it after (since, remarkably, the photo books don't appear as items - items which could very easily be recovered otherwise)?

    I get a dialog box when I try to delete a book.
    And if you right click on the book in the left column you can duplicate it so you can have multiple versions.

  • Logical System Name after System Copy

    Hello,
    I have three questions about the logical system name after system copy.
    Q1) When I change SID D22 to S11 during system copy,
    do I have to change the logical system name of all clients in the target system? The target system is used for test, and the landscape has S11 and Virtial system. The target system S11 does not communicate with the source system D22.
    Q2)  If the answer for Q1 is YES, is it correct that the following procedure for changing logical system name?
    1.Tr-CD:BD54
       Add new logical system name for all clients in the target system.
    2.Tr-CD:SCC4
       As for all clients, select new logical system name with F4 help.
    Q3) If the answer for Q1 is YES, do I have to add new RFC connection entries with SM59 for all clients in the target system?
    I refer to the guide "Homogeneous and Heterogeneous
    System Copy for SAP Systems Based
    on SAP Web Application Server
    ABAP 6.40 SR1".
    thanks,
    Keishi

    Hi Keishi,
    As a good and ideal practice the answer to your first question Q1 is yes. Infact I would say that in case you are using ALE then it is must
    For Q2 there has to be an additional step which is most important one. Running BDLS transaction which would allow you to change logical systems in relevant tables from the one of source system to target system.
    For Q3  the answer is agaain yes and you can have two approaches>
    1. manually recreate all the RFC destinations after sys. copy.
    2. Export all the RFC destination data relevant tables before system copy and then reimport them after sys. copy.
    Regards.
    Ruchit.

  • Post processing after system copy from standalone to cluster enviornment

    Hi,
    I have done a system copy(Backup restore method) from a standalone quality BW (QBW) system to cluster environment (TBW).
    The steps I have followed as follows.
    . setup the machines in the cluster environment  ( Windows 2003 EE server,sql 2005 SP3)
    . Backup the current database in the source system
    . Given a different SID (TBW) during the System copy installation .its a dual stack installation.
    . Restore the database in the target system and select the back up restore method during the system copy database installation step.
    .The installation completed successfully and i m having some doubts regarding the post processing steps after this .
    We want to retain the same client in the target system ,for this i need to rename the  logical name .Kindly assist me for changing the logical name for the extraction of BW delta process from extraction server to BW system and also the other steps I have to follow after system copy.
    Thanks
    Arun Padikkal

    Hi Arun,
    You should probably post this question in a basis forum.
    Cheers,
    Diego

  • Steps after sys copy

    hi
    ı have done homogenous sys copy
    ı have 2 questions :
    1-after system  copy is it enough making changes using tcode scc4 for logical sys name and client roles ?
    we dont use ale  apps.  should ı run bdls?
    2-  which option I should run sgen  with ?
    thsnks in advance

    Hi
    You need to perform all post system copy activites mentioned in the system copy guide @ http://service.sap.com/systemcopy
    For logical system changes Refer
    Change logical system names after system copy
    Sgen : I would reccomend to  select all components .
    Regards,
    Nibu Antony

  • BW Homogeneous copy Manual

    Hi,
    Where can I download the homogenous copy guide for BW 3.5/Netweaver04.  We are in Oracle 9i and HP-UX 11i.  I tried searching under service.sap.com/instguides but failed.
    thanks,
    krbas

    Hi,
    You may also see SAPNote 771209 “NW04: Homogeneous and Heterogeneous System Copy (supplementary SAP note)“ for any supplements to the guide.
    Related SAP Notes:
    o 184447 Building a BW-system landscape
    o 121163 BDLS: Converting logical system names
    o 369758 BDLS: New functions and better performance
    o 524554 Storing destinations in the BW environment
    o 325470 Activities after client copy in BW source systems
    538052 Maintenance of Myself destination in BW
    o 305527 Details for correct BW Source System Connection
    o 325525 Copying and renaming systems in a BW environment
    o 184971 Notes on BW source system connections
    o 184754 Procedure after BW database copy; note: procedure in how-to paper is
    different from note: The How-to paper controls!
    o 305527 Details for correct BW Source System Connection
    o 547314 FAQ: System Copy procedure
    o 733623 Oracle export/import for BW system copies
    o 760949 Deallocating extraction due to upgrade or in copied
    o 676084 Heterogene System Kopie BW auf MS SQLServer
    o 518426 ODS object - SYSTEMCOPY, migration
    o 140276 Error in source system assignment
    Regards,
    ®

  • Homogeneous Copy Error

    Hi Gurus,
    While doing Homogeneous Copy after database restore below error coming, advise me here to come out the issue...
    User table belonging to the dbo schema were found in the database DEV
    you can only install an SAP system in a database(MCOD), or you instale a JAVA add in, you might have to convert the existing sytem to its own schema, or contact your SAP support.....
    Thanks in advance.
    Best Regards,
    Rk

    Hello  Rk d,,
    Could you please share the solution with us,I am having the same problem and i am strucked in the middle ..Please suggest me with your experience
    Regards
    Vijay

  • How can I restore backup if I copy the backup (Think Vantage RR 4.0) to another storage

    After I copy a backup to another storage, it is not possible to restore this backup, because the old path, from the other storage is entered. Is there a possibility to change this path and restore the backup?
    thx for help!

    Are you launching the restore operation from within Windows?
    You may be able to browse to the copied backup if you boot R&R from a CD/DVD.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Dialog Instances Java are not up after System Copy NW2004s SR2 ABAP+JAVA

    Hello guys,
    I have just  performed a system copy of our BW system (douple stack NW2004s) wich consists from CI and 2 DIs. First I  made an export using SAPINST (Software from SAP_BUSINESS_SUITE_2005_SR2 for sparc solaris), where I choosed in SAP Installation Master->SAp Netweaver 2004s Support Release 2->Additional Software Life-cycle Tasks->System Copy->Oracle->Source System->Central System->Based on ABAP and Java->Database and Central Instance Export. I couldn't find any special task for export java from my dialog instances, so I thought it would be ok like that. Then I used the same software on my target system, choosed ...Additional Software Life-cycle Tasks->System Copy->Oracle->Target System->Central System->Based on ABAP and Java->Central System Installation. In the Dialog input phase of SAPINST I indicated that use db specific tools to copy your database. So I made the database restore+recovery with our DB tools and continued withthe SAPINST and Import.
    Afterwards the ABAP part and Java on the central Instance run perfect, but Java Stack is not up by both of Dialog Instances. I have checked the configtool on the server where the CI is running (the DIs are running on different linux servers) and couldn't see any entries for my dialog instances, only the CI was seable there. I tried to start configtool from the application server, but there I could find only the file config.properties in the directory /usr/sap/<SID>/.../j2ee/configtool/, others were simply not there, so it was impossible to start it. Have i forgotten something by EXPORT/IMPORT or I should just use other software for coping a System with douple stack on a CI and DIs? Or should I get configtools for Linux platform ( have searched but not found yet) and try to make the same changes wich i have done by the CI before i started Java on the CI? The most irritated point is that i can't see the dialog instanes in Configtool from the CI.
    Any other suggestions and good advices?
    Thanks a lot in advance.
    Regards, Polina

    Hi Manoj, </p>
    I have founded following information in the work directory of one of my dialog instances ( where the java stack doesn't want to start after the copy):  /usr/sap/SID/instance/work/ <br>
    1) std_server0.out  is in the condition before the system copy, no new data was written there. <br>
    2)dev_disp <br>
    DpJ2eeStart: j2ee state = STARTED<br>
    DpJ2eeLogin: j2ee state = CONNECTED<br>
    Fri Feb 26 12:58:04 2010<br>
    ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c   1212]<br>
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)<p>
    Fri Feb 26 12:58:20 2010<br>
    DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN<br>
    Fri Feb 26 12:57:20 2010<br>
    ***LOG Q0I=> NiIBindSocket: could not delete file '/tmp/.sapstream64984' for hdl 2: unlink (1: Operation not permitted) [nixxi.cpp 3207]<br>
    ERROR => NiIBindSocket: could not delete file '/tmp/.sapstream64984' (hdl 2; errno=0) [nixxi.cpp    3214]<br>
    WARNING => NiIBind: Could not bind local domain socket, only listening on internet socket [nixxi.cpp    3491]<p>
    It seems that java is trying to start but something goes wrong and  it have to shut down<p>
    3)dev_bootstrap<br>
    [Thr 1086335296] JLaunchIExitJava: exit hook is called (rc = 66)<br>
    [Thr 1086335296] **********************************************************************<br>
    ERROR => The Java VM terminated with a non-zero exit code.<br>
    Please see SAP Note 943602 , section 'J2EE Engine exit codes'<br>
    for additional information and trouble shooting.<br>
    **********************************************************************<br>
    [Thr 1086335296] SigISetIgnoreAction : SIG_IGN for signal 17<br>
    [Thr 1086335296] JLaunchCloseProgram: good bye (exitcode = 66)<p>
    4) jvm_bootstrap.out<br>
    ...<br>
    Exception occurred:<br>
    com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/dispatcher/ID264509300" does not exist.
    ..<br>
    Exception occurred:<br>
    com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!<br>
            at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:476)<br>
            at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146)<br>
    com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID264509300) in the database! Check database consistency or local Bootstrap properties!<br>
    [Bootstrap module]> Problem occurred while performing synchronization.<p>
    j2ee/instance_id = ID2645093 <--- that is the ID of those DI where i took these traces from. So it seems that this ID is not in the database at all. Probably the infromation about the java stack of my DIs was not exported at all...<p>
    Thanks in advance. <br>
    Regards, <br>
    Polina

  • Accounting document not copied after system copy.

    Hi,
    We copied the production system into our test system using backup/restore.  In the post copy verification, our CO team complained because they could not see the "accounting documents".
    What do you think happened why the accounting document was not copied?
    thanks
    krbas

    Hi Krbas,
    Make sure you did all the post processing activities after system copy. I doubt you missed some post processing activities related to CO after your system copy.
    regards,
    VInodh.

  • User password problem in RFC after system copy

    HEllo,
    we have a problem in ECC6.0 after system copy (refresh QUAL system by PRD data).
    BEfore doing this copy, we export RFC data (SM59 tables) of our QUAL system and after the refresh we reimport these RFC in our QUAL system. We don't want RFC comming from productive system.
    After this reimport, RFC configuration is ok but we have a problem with RFCuser password. In the password box we have "inconsistent"...
    Have you an idea to reimport succesfully these informations ?
    Thanks
    lionel

    Hello,
    We performed another refresh yesterday. But unfortunatly it was not working. Password are still inconsistent.
    This are exactly way we perform it:
    Before restoring DB :
    export table via R3trans for tables:
    RFCDES, RFCDOC, RFCATTRIB, RFCCHECK, RFCDESSECU, RFCSYSACL, RFCTRUST, RFCCMC, RFCGO, SXRFC, IBSSI_RFCDEST, PARAMVALUE, RSECACTB where ident LIKE '___/RFC%'
    export users via scc8
    Restore DB, truncate upper rfc tables,  import rfc Tables
    Check SM59 => inconsistent
    Migrate Secstore => still inconsistent
    Import Users via transport generated by scc8
    run scc7 as post actions
    Tuncatate/re-import rfc tables
    Check SM59 => inconsistent
    Migrate Secstore => still inconsistent
    What else could be done ?
    We have a lot of RFC. so re-enter all password is really a hudge task ..
    Thanks a lot for help

Maybe you are looking for