Restoring computer with new hard drive & Logic Board using Time Machine

My MBPro totally crashed and just got it back from Apple with a new hard drive, logic board, optical super drive, one new 1GB ram chip, and a new video display panel. My questions are two fold, first, have I had so much replaced on this machine that I need to use Migration Assistant instead of Time Machine to restore it?
Second, If I am suppose to be using Time Machine, I'm having no success! My TM backups were done on a network drive via Airport Extreme with a HD attached to it. Through the Snow Leopard disk utility, I can access the partition with the backup on it, but then it hangs on "opening TM backup". After about a half hour, I had to do a hard shut down (no other option). I did this several times, same result. So the question is;
Can I plug the HD directly into my MBPro and restore it that way? I'm not sure if I can do this as I know the backups are different for hard wired and networked drives.
Or can I use an ethernet cable and plug Airport Extreme with the external drive attached into my laptop?
Thanks for any help!

Arlee wrote:
My MBPro totally crashed and just got it back from Apple with a new hard drive, logic board, optical super drive, one new 1GB ram chip, and a new video display panel. My questions are two fold, first, have I had so much replaced on this machine that I need to use Migration Assistant instead of Time Machine to restore it?
no. you can do a full system restore from TM using the restore utility on the snow leopard DVD.
Second, If I am suppose to be using Time Machine, I'm having no success! My TM backups were done on a network drive via Airport Extreme with a HD attached to it. Through the Snow Leopard disk utility,
snow leopard disk utility?? what exactly are you doing? disk utility is not involved in restoring from TM in any way.
I can access the partition with the backup on it, but then it hangs on "opening TM backup". After about a half hour, I had to do a hard shut down (no other option). I did this several times, same result. So the question is;
Can I plug the HD directly into my MBPro and restore it that way? I'm not sure if I can do this as I know the backups are different for hard wired and networked drives.
no, this is not how you should do it. connect the AEBS by ethernet. then boot from the snow leopard dvd and use "restore system from backup" from the Utilities menu. it will let you find the backup on the network and do a full system restore from it.
Or can I use an ethernet cable and plug Airport Extreme with the external drive attached into my laptop?
Thanks for any help!

Similar Messages

New Hard Drive- Should I use Time Machine for "fresh" install?

I have a first generation Early 2008 MacbookPro. Warranty just ended and I want to replace the hard drive w/ the Seagate Momentus XT Hybrid. I'm getting a bunch of spin wheel action and things are just running slowly/sluggish. I'm questioning whether or not I should just do a real "fresh" install and load my applications onto the new drive or use TimeMachine. If I use TM am I not adding all the stuff/files that are not needed? Am I adding bloat that I've collected over the past couple of years? Is it better to start w/ a new clean operating system? I do have CS5 and some photo programs that I think I can reinstall. Anyway I wanted to get people's perspective.
Message was edited by: mikked

It's usually best to clean your system up, and deal with any problems before doing major surgery.
With any other scenario, if something goes wrong, how will you know what it was, much less how to fix it?
I'd start with this: [Intel-based Macs: Using Apple Hardware Test|http://support.apple.com/kb/HT1509].
Then Verify your internal HD, and repair your Time Machine drive, per #A5 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
Then run a +*Repair Permissions+* on your internal HD, via Disk Utility.
Then replace the drive, do a full system restore and run for a while to be sure the new drive and everything else is ok. See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for details.
Then start deleting the apps and files you don't need.
Note that, unlike Windoze, leftover files and apps may take up a bit of space, but don't cause any performace problems, unless they're actually running.
The main problems with trying to transfer things selectively are:
Permissions. If you install OSX and set up a user account, that account, even if it has the same name, may not have permission to restore the files on your backups or other drives.
Applications. Simple apps can be transferred individually, such as by restoring from Time Machine. Complex ones usually can't, as their installers put other files in other places. If you don't know what and where they all are, and restore them, too, the app won't work properly, if at all. But if you have all the original discs (and serial numbers/purchase keys), you can just reinstall them.

Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos.

Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos. I wanted to see if I could view them from the hard drive. Thanks

Hello, eco1.
Thank you for visiting Apple Support Communities.
This sounds like you are wanting to move your iTunes media folder to an external drive and have iTunes this folder from this location. If this is the case then I would recommend taking a look at the article below.
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/ht1449
Cheers,
Jason H.

How do I find my photos on my external hard drive backed up using Time Machine?

How do I find my photos on my external hard drive backed up using Time Machine?
My hard drive died so this is my only storage. The hard drive was from an early 2008 Macbook Pro.
I had recently installed Snow Leopard.

If they’re in an iPhoto library, look in the Pictures folder of your home folder first. Otherwise, they’ll be in the location corresponding to the one you saved them to.
(111765)

Mediasmart software problem loading onto computer with new hard drive and operating system

My computer recently crashed and I had to buy a new hard drive and operating system. None of the programs from the old hard drive were saved. The computer is an HP Pavilion dv7-3165dx Entertainment Notebook and I have Windows 7 Professional (64x) as the operating system. Tried to download Mediasmart from the HP Web page to play DVD and Blu-Ray Discs. The programs downloaded but will not install. Any suggestions?

waynesworld57 wrote:
My computer recently crashed and I had to buy a new hard drive and operating system. None of the programs from the old hard drive were saved. The computer is an HP Pavilion dv7-3165dx Entertainment Notebook and I have Windows 7 Professional (64x) as the operating system. Tried to download Mediasmart from the HP Web page to play DVD and Blu-Ray Discs. The programs downloaded but will not install. Any suggestions?
Hi,
It looks like it's a common issue: http://h30434.www3.hp.com/t5/TX-TM-Series-Notebooks-Reply-Only/HP-Mediasmart-Software-package-for-Wi...
Try VLC as a multimedia player: http://www.videolan.org/vlc/download-windows.html
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

3rd gen iPod will not complete the RESTORE process with new Hard Drive

I have an 3rd gen iPod and I have replaced the hard drive with a newer MK2006GAL. The drive formats fine with a USB cable, formating Mac OS Extended Journaled. It will not complete a "restore" when connected via FireWire in iTunes or with any ipod updater utility. this happens on any mac (we have several). It will not even see the iPod updater when connected via USB and it says MUST CONNECT WITH A FIREWIRE CABLE. It will not format with Disk Utility when connected with the Apple FireWire cable only USB. This is the second new hard drive I have tried. I thought the first "replacement drive" was bad. Turns out it must be something else. Does this sound like a bad battery or motherboard or bad FireWire cable to you? The connectors look fine (under magnification). other problems, while this iPod will not Restore properly, it also will not turn off.
Would like to know if anyone else has seen this trouble.
thanks.
Powermac G4 1.25 MDD, OS9/OSX, 3rd gen iPod Mac OS X (10.3.9)
Powermac G4 1.25 MDD, OS9/OSX, 3rd gen iPod Mac OS X (10.3.9)
Powermac G4 1.25 MDD, OS9/OSX, 3rd gen iPod Mac OS X (10.3.9)

Hmm now getting this message.
"The ipod "ipod" could not be restored.An Unknown Error occured (1429)".
It still will not format. Does anyone know what a 1429 error is?
Powermac G4 1.25 MDD, OS9/OSX Mac OS X (10.3.9)

Can I restore a new hard drive from a previous time machine back-up?

Hi there,
My MacBook Pro 13 inch is 4 years old.
The computer began to freeze/stop working, so I took it to an Apple care centre and they informed that my hard drive has crashed and has to be replaced.
Luckily, I backed up my old hard drive a few days before with an external hard drive using Time Machine. My question is: can I restore this new hard drive with my old time machine backup that is on my external hard drive? If so, how do I do this?
Thanks

Of course! If you couldn't, Time Machine would be rather worthless, now wouldn't it?
For instructions, see:
How do I restore my entire system?

Can I back-up files to a portable hard drive and not use Time Machine?

I have a portable hard drive that I use for all of my Time Machine back-ups. I back-up the entire system every two or three weeks. I use the Time Machine software and it works quite well. I'm interested in backing up specific files (photos, documents, etc.) to a second portable drive every six months but I don't want to use the Time Machine software. Is there a simple way to hook up the portable drive (brand new Lacie 500 gb drive), open up the file on my desktop and drag the files to the new drive? Are there special steps I need to perform to avoid formatting the drive for Time Machine? Any tips will be greatly appreciated.

MacConvert54 wrote:
Is there a simple way to hook up the portable drive (brand new Lacie 500 gb drive), open up the file on my desktop and drag the files to the new drive?
You can do that, but you'll have to erase the drive, or delete the previous versions, each time. You might want to look at CarbonCopyCloner or SuperDuper. They're most often used to make full bootable "clones" of your internal HD, but can be set to back up specific files and folders as well. CCC is donationware, so you can try it for a while before sending them some $$ so they can keep it up to date. SD has a free version, but I think you'll need the paid one (about $30, I think) to do this.
Are there special steps I need to perform to avoid formatting the drive for Time Machine?
It would be best to format it for Macs, which is the same as Time Machine. What is the problem with that?

Restoring with new Hard Drive

My dad had to clean out my hard drive earlier this year, so all my data was lost. I downloaded Yamipod, the program that takes music from the ipod. But now, when I want to add songs to my ipod, it says that it's corrupted and I need to restore it.
I tried to copy all my songs via Yamipod, but it's not recognizing it either.
The ipod still works but it doesn't work with iTunes.
I don't want to lose all my songs! Help!

Arlee wrote:
My MBPro totally crashed and just got it back from Apple with a new hard drive, logic board, optical super drive, one new 1GB ram chip, and a new video display panel. My questions are two fold, first, have I had so much replaced on this machine that I need to use Migration Assistant instead of Time Machine to restore it?
no. you can do a full system restore from TM using the restore utility on the snow leopard DVD.
Second, If I am suppose to be using Time Machine, I'm having no success! My TM backups were done on a network drive via Airport Extreme with a HD attached to it. Through the Snow Leopard disk utility,
snow leopard disk utility?? what exactly are you doing? disk utility is not involved in restoring from TM in any way.
I can access the partition with the backup on it, but then it hangs on "opening TM backup". After about a half hour, I had to do a hard shut down (no other option). I did this several times, same result. So the question is;
Can I plug the HD directly into my MBPro and restore it that way? I'm not sure if I can do this as I know the backups are different for hard wired and networked drives.
no, this is not how you should do it. connect the AEBS by ethernet. then boot from the snow leopard dvd and use "restore system from backup" from the Utilities menu. it will let you find the backup on the network and do a full system restore from it.
Or can I use an ethernet cable and plug Airport Extreme with the external drive attached into my laptop?
Thanks for any help!

I have a new Windows tablet computer with limited hard drive space, and cannot transfer my itunes library to the hard drive. Can I run t media from an external hard drive? If so, how do I transfer my files?

I have a new Windows tablet computer with limited hard drive space (32 GB), and cannot transfer my itunes library to the hard drive. Can I run itunes from an external hard drive? I have tried to follow some of the directions on this site, but am having no success. Thanks.

iTunes will run fine with the media on an external drive.
However, I suggest that a tablet computer with a tiny hard drive is not ideal as the primary computer for managing an iTunes library, even a small one. If you have another machine, perhaps a big, boxy, inexpensive old desktop with a decent amount of storage, that might be a better choice.
http://support.apple.com/kb/HT1364

How to restore music on computer after new hard drive installed?

had new hard drive installed and am not able to retrieve/find music that was backed up on my computer before new hard drive was installed. Only music that was in the "cloud" was able to be retrieved. Any idea where it could be?
Thanks!

Did you reinstalled iTunes ? It looks like you had a newer version of iTunes with the corresponding database, and now your iTunes seem to be an older version. If you are a little patient, you might easily fix this with iTunes 10.5 which should come out very very soon since iOS 5 has been annonced for tomorrow.

Will Time Machine with Leopard Sync With New Hard Drive and Snow Leopard?

My computer is a 20" iMac that I bought in late 2008. The hard drive had trouble so Apple repaired with disk utility. Week later, more trouble so they did full hard drive erase. Data was backed up on Time Machine, 500GB also bought in 2008. After full hard drive erase, and reinstall of basic software, upon reboot, computer would power on then immediately off. It doesn't get past white screen. They advised a new hard drive install is needed.
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc. He could do it with Snow Leopard but I am scared. I'm afraid because my Time Machine last backup was with Leopard, not snow Leopard. I do not have my application discs with me, they are in storage in another state. Thus, if upon adding replacing hard drive and installing Snow Leopard my computer won't be able to sync FILES and APPLICATIONS from Time Machine because its on Leopard I will have a problem.
How can I either 1)Get a Leopard install disc and do that with the new hard drive install OR 2)make sure that a Snow Leopard install with new hard drive won't prevent my Time Machine from being able to install the saved FILES and APPLICATIONS if I don't have original APPLICATION (ie Aperture, Photoshop) with me? Thanks for any help you can provide.

thetrudz wrote:
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc.
Hi, and welcome to the forums.
That Mac should have come with Leopard. If so, call AppleCare. They'll send you replacement discs for a nominal fee.
Once this is sorted out, make a 8-10 GB partition on an external HD or your internal HD, and use the Restore tab of Disk Utility to copy the Install disc to that partition. Then you can boot and run from it instead of the physical disc. It will boot and run much faster, too.
He could do it with Snow Leopard but I am scared.
If he does, and doesn't provide a retail Snow Leopard disc, you must buy one ($29). It's a violation of the license to share software, and you'll need a SL disc to do things like restore a Snow Leopard backup, or the Snow Leopard Apple apps, or repair the internal HD.
Your best bet is to stay with Leopard, at least until you have access to your 3rd-party software discs.
What you can do, however, is borrow his Snow Leopard Install disc (assuming it's a white Retail disc, not a gray one that came with his Mac), and use it to do a full system restore from your backups. That's not a violation of the license, since you don't install or use OSX from that disc; you just use the Installer utility on it to restore the Leopard OSX and all your data from your backups.
See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for details.

I bought a new external hard drive for backups, but time machine won't do a full back up. I think it is remembering backing up onto previous external hard drives, which I don't own anymore. How do I do a new full backup?

I bought a new external hard drive for backups, but time machine won't do a full back up.
I think it is remembering backing up onto previous external hard drives, which I don't own anymore. How do I do a new full backup?
When I bought the new (used) iMac, I also bought an external hard drive for backups. It worked fine, but my husband stole it.
Then I bought a new external hard drive (Seagate) and it worked fine for three weeks, then died.
So I just got a new external hard drive, which was put together from an internal hard drive and a hard drive enclosure.
Time machine did the first backup today, and it should have taken 9 hours like it did on the previous first time full back up. Instead, it took 30 minutes. That can't be right. I want to start over and do a full backup to make sure everything gets onto my new external hard drive, but I can't figure out how to do that. Please help.

Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

Do I need startup discs to upgrade hardware on MacBook Pro or can I restore the hard drive from from a Time Machine backup?

do I need startup discs to upgrade hardware on MacBook Pro or can I restore the hard drive from from a Time Machine backup?

Ok, well go and grab a small 2.5" hard drive enclosure so you can put the new drive in & temporarily use it like an external hard drive.
Download Carbon Copy Cloner or Super Duper and make a bootable clone of your current HDD on the new HDD.
Once that's done you can test the clone by booting from it. To do this hold Optioni while booting to select the external (new) drive. If everything looks ok, you can go ahead and swap over the HDD's.
So much easier.

HT201250 I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them?

I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them? No, they were not part of previous Time Machine backups, and I have checked both the hard drive the documents were lost on and the new one that I now use for backups. Any suggestions would be helpful, as the lost files are old pictures that are gone forever. :[ Thanks!

1. Yes, if both drives are formatted as Mac OS Extended (Journaled).
2. Reformat the drives if needed, open the Time Machine pane of System Preferences, and remove the drive with the pictures from the list of items set to be excluded.
(110331)

Restoring computer with new hard drive & Logic Board using Time Machine

Similar Messages

Maybe you are looking for